REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1236
When "dmem" runs without additional arguments, it dumps the memory
content of EFI_SYSTEM_TABLE. But today's implementation dumps 512
bytes. It's not correct because sizeof (EFI_SYSTEM_TABLE) is less
than 512, the 512-read causes page fault exception in a heap-guard
enabled environment.
The patch changes the implementation to only dump
sizeof (EFI_SYSTEM_TABLE) bytes for gST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@.com>
ShellPkg-Cd: Ensure all valid cd targets are handled properly
Make sure that PathCleanUpDirectories() is called on all valid targets
of the cd command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCD below is unused, so it has been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellPrintBufferSize
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Update SmbiosView to parse the new definitions which
are introduced in SMBIOS3.2.0
V2:
1. Add structure length check before dump the fileds in
Type 9 and Type 17 in case some fileds are not organized
and reported by drivers.
2. Dump the InterfaceTypeSpecificData in Type 42.
V3:
1. Correct the structure length in Type17.
2. Remove the redundant check "if (PeerGroupCount > 0)" in Type 9.
3. Use the Uint16 filed instead of Bits field in union
MEMORY_DEVICE_OPERATING_MODE_CAPABILITY to dump data.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The issue was found when heap guard is turned on.
PrintLib somehow receives a non-null terminated string in var-arg.
When the PrintLib implementation reads the string it keeps
reading because no null-terminator is met, which triggers the page
fault set by the heap guard.
The issue is caused by a bug in FileBufferPrintLine().
When "edit" opens a binary file, in FileBufferPrintLine(),
the Line->Buffer may start with \x00 \x00, but the Line->Size is
larger than MainEditor.ScreenSize.Column, it causes the PrintLine is
set to an empty string by below call:
StrnCpyS (
PrintLine, BufLen/sizeof(CHAR16), Buffer,
MIN(Limit, MainEditor.ScreenSize.Column)
);
But since Limit (equals to Line->Size) is larger than
MainEditor.ScreenSize.Column, below for-loop doesn't successfully
set the whole PrintLine to all-empty-space.
for (; Limit < MainEditor.ScreenSize.Column; Limit++) {
PrintLine[Limit] = L' ';
}
So after the for-loop, PrintLine is still an empty string.
Later in below call, the PrintLine2 is created based on PrintLine.
ShellCopySearchAndReplace (
PrintLine, PrintLine2,
BufLen * 2, L"%", L"^%", FALSE, FALSE
);
But due to the implementation of ShellCopySearchAndReplace(),
PrintLine2 is untouched and INVALID_PARAMETER is returned.
Finally an uninitialized string is passed to ShellPrintEx()
which causes the #PF exception.
The fix is to reset Limit to StrLen(PrintLine) before for-loop.
So that PrintLine can be converted from an empty string to a
string containing all spaces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
Replace the "old shell method" implementation in
ShellOpenFileByDevicePath() with EfiOpenFileByDevicePath() from UefiLib,
correcting the following issues:
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The ShellOpenFileByDevicePath() API promises to set the DeviceHandle
output parameter to the handle of the filesystem identified by the
FilePath input parameter. However, this doesn't actually happen when the
UEFI Shell 2.0 method is used (which is basically "always" nowadays).
Accordingly, the only caller of ShellOpenFileByDevicePath(), namely
ShellOpenFileByName(), defines a (dummy) local DeviceHandle variable just
so it can call ShellOpenFileByDevicePath().
Remove the useless output parameter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Today's implementation returns 0 even when compared files are
different.
The patch returns 27 (SHELL_NOT_QUAL) in such case to follow
the shell spec.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Separate variable definition and initialization.
2. Make the variable naming following Edk2 rule.
V2: Remove the updates of guard macros in header files.
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Evan Lloyd <evan.lloyd@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
TrEE is deprecated. We need use Tcg2.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Neither the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL nor the EFI_CPU_IO2_PROTOCOL
impose any restrictions when it comes to the range of valid I/O
addresses. Even so, the 'mm' command in -IO mode refuses to perform
accesses to addresses >= 0xffff.
It is not up to 'mm' to impose this restriction, so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Issue:
Reply for first ping packet was getting dropped.
Cause:
Sometimes reply message comes even before trasmit
function returns, hence missing 1st reply
Fix:
Prepare the TxList before calling Transmit function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
After commit 20ddbc133f
* MdeModulePkg/ConSplitter: ReadKeyStrokeEx always return key state
When one physical console supports to report the shift key state,
the key data returned from ConSplitter driver at least carries
the shift key valid bit.
The patch fixes the edit/hexedit to accept Unicode (1) when
the no shift key is pressed or reported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=682
Edit and HexEdit commands assume that SimpleTxtIn translates
Ctrl+<Alpha-Key> key combinations into Unicode control characters
(0x1-0x1A).
Such translation does not seem to be required by the UEFI spec.
Shell should not rely on implementation specific behavior.
It should instead use SimpleTextInEx to read Ctrl+<Alpha-Key> key
combinations.
The patch changes edit and hexedit to only consumes SimpleTextInEx
so that the implementation specific behavior dependency is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Felix <felixp@mail.ru>
Cc: Felix <felixp@mail.ru>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
An ordinary empty directory should contain "." and ".." entries.
When an empty directory even doesn't contain "." or ".." entry,
FileHandleFindFirstFile() may return error status and a NULL
FileInfo.
IsDirectoryEmpty() implementation in Rm.c doesn't consider this
case and the deference of FileInfo->FileName causes page fault
exception because FileInfo is NULL.
The patch checks the return status of FileHandleFindFirstFile()
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
HDiskImageSetDiskNameOffsetSize() and HFileImageSetFileName()
may be called using the current disk name or file name.
When this happens, today's implementation firstly frees the memory
and then accesses the just-freed memory.
The patch fixes this issue by doing nothing when the disk or file
name is the current one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
"Compress.h" declares the Compress() function as EFIAPI, but the
definition in "Compress.c" lacks EFIAPI.
GCC toolchains without LTO do not catch this error because "Compress.c"
does not include "Compress.h"; i.e. the declaration used by callers such
as "EfiCompress.c" is not actually matched against the function definition
at build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file. Finally, remove EFIAPI from both declaration and
definition -- this was the original intent of commit c4e74e9b81
("ShellPkg/UefiShellDebug1CommandsLib: Remove unnecessary EFIAPI",
2016-10-09), but it missed the header file.
(Gary meant to address that omission in Oct 2017:
[edk2] [PATCH] ShellPkg/UefiShellDebug1CommandsLib: Remove EFIAPI from
Compress()
http://mid.mail-archive.com/20171026065329.32311-1-glin@suse.com
and Ray reviewed the patch, but then the patch was never committed.)
So do the sync and drop EFIAPI now.
This happens to fix the EFICOMPRESS shell command, when built with GCC for
X64.
Cc: Gary Lin <glin@suse.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: c4e74e9b81
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The below code reads additional one CHAR16 when copying
content from Specific to NewSpecific.
NewSpecific = AllocateCopyPool(
StrSize(Specific) + sizeof(CHAR16), Specific
);
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
When "FOR %a %a IN A B C" is executed,
CurrentScriptFile->CurrentCommand->Data is NULL.
But the code assumes it's not NULL and tries to
deference it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Original code locates the first UnicodeCollation instance in
DXE Core protocol database.
It's not correct considering multiple UnicodeCollation instances
exist in system.
The patch changes logic to find the one that matches the current
system language.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com.
In the for-loop condition of original code, the expression
*CurrentCommand != CHAR_NULL
is put before expression
CurrentCommand < SortedCommandList + SortedCommandListSize/sizeof(CHAR16)
When CurrentCommand walks to the end of string buffer, one more character
over the end of string buffer will be read and then stop.
To fix this issue, just move the last expression to the first one. Because
of short-circuit evaludation of and-expression, the following one
*CurrentCommand != CHAR_NULL
will not be evaluated if the expression before it is evaludated as FALSE.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
UefiShellLevel2CommandsLib (somewhat questionably) calls the
BaseLib-internal function InternalCharToUpper().
This function is declared in "MdePkg/Library/BaseLib/BaseLibInternals.h",
which is not a public library class header. UefiShellLevel2CommandsLib
therefore duplicates the function declaration, but a mistake was made: the
EFIAPI calling convention is not spelled out on the duplicated
declaration. Therefore calls made from UefiShellLevel2CommandsLib will not
match the actual function definition in "MdePkg/Library/BaseLib/String.c",
when GCC/X64 toolchains are used.
One consequence of this is that cross-filesystem copies don't work in the
UEFI shell (see the StrniCmp() function in
"UefiShellLevel2CommandsLib.c"). From the original report:
> FS0:\efi\ubuntu\> cp grubx64.efi fs1:\
>
> cp: The source and destination are the same.
Copy the declaration from "BaseLibInternals.h" to
"UefiShellLevel2CommandsLib.c" verbatim.
Reported-by: Rebecca Cran <rebecca@bluestop.org>
Analyzed-by: Thomas Palmer <thomas.palmer@hpe.com>
Analyzed-by: Liming Gao <liming.gao@intel.com>
Ref: http://mid.mail-archive.com/47cd17d8-f022-6ca5-2f52-06a8250f8d14@cran.org.uk
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Rebecca Cran <rebecca@bluestop.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Last check in involved a build error, this patch is to
fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in ShellPkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
The previous change in ShellLib: "commit
3d29f8c5e3
* ShellPkg/ShellLib: Constructor doesn't depend on ShellParameters"
resolved the issue when loading dynamic command driver from Shell
environment.
But when dynamic command driver is built into FV and started during
boot, the driver still fails to start because Shell protocol doesn't
exist at that time.
The patch changes ShellLib to:
1. Do not look for Shell and ShellParameters protocol when they are
non-NULL in ShellLibConstructorWorker();
The two protocols are assumed to be set by DynamicCommand.Handler.
When ShellInitialize() is called in DynamicCommand.Handler, this
change can prevent the two protocols to be changed to NULL by
the locating logic.
2. Do not reset the Shell and ShellParameters protocol to NULL in
ShellLibDestructor() when CloseProtocol() fails;
Dynamic command driver needs to set the PcdShellLibAutoInitialize
to FALSE in order to skip the constructor.
Current logic calls ShellLibDestructor() when the PCD is FALSE when
ShellInitialize() is called. The change prevent the two protocols
to be changed to NULL.
The two changes don't impact existing usage case so they are backward
compatible.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So dp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
DpApp.inf is to provide a standalone application.
DpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So tftp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
TftpApp.inf is to provide a standalone application.
TftpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
When ShellLib is linked to a driver producing DynamicCommand
protocol, ShellParameters protocol is set by
DynamicCommand.Handler().
The driver image handle doesn't have ShellParameters protocol
installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
EfiCpuIoWidthUint8 should be used in HMemImageRead and HMemImageSave.
Because CpuIo protocol is now used for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Ruiyu Ni
Jim.Dailey@dell.com
shenglei
Fu Siyuan
Dandan Bi
Laszlo Ersek
AlexeiFedorov
chenc2
Liming Gao
Jiewen Yao
Ard Biesheuvel
Meenakshi Aggarwal
Jian J Wang
fanwang2
Song, BinX