We currently permit R_ARM_GOT_PREL relocations in the ELF32 conversion
routines, under the assumption that relative relocations are fine as
long as the section layout is the same between ELF and PE/COFF.
However, as is the case with any proxy generating relocation, it is
up to the linker to emit an entry in the GOT table and populate it
with the correct absolute address, which should also be fixed up at
PE/COFF load time. Unfortunately, the relocations covering the GOT
section are not emitted into the static relocation sections processed
by GenFw, but only in the dynamic relocation section as a R_ARM_RELATIVE
relocation, and so GenFw fails to emit the correct PE/COFF relocation
data for GOT entries.
Since GOT indirection is pointless anyway for PE/COFF modules running
in UEFI context, let's just drop the references to R_ARM_GOT_PREL from
GenFw, resulting in a build time failure rather than a runtime failure
if such relocations do occur.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The self-relocating PrePi module that is used by the ArmVirtQemuKernel
and ArmVirtXen targets runs the linker in PIE mode so that it emits
dynamic relocations into the final image in a way that permits the
module to relocate itself into place before calling into the C code.
When building these targets using the CLANG38 toolchain, we switch
from the BFD to the GOLD linker, which behaves a bit differently when
building PIE executables, and insists on emitting GOT indirected symbol
references throughout, which means a) that we end up with absolute
addresses (which need to be fixed up at load time) for no good reason,
and b) we have to add support for handling GOT entries to GenFw if we
want to convert them into PE/COFF.
So instead, let's emit a shared library. Since the ELF image only serves
as the input to GenFw, this does not lead to any loss of functionality,
although it does require the -Bsymbolic linker option to be added to
ensure that no symbol based dynamic relocations are emitted (which
would, e.g., permit lazy binding for shared libraries). So for all
other toolchains, the linker option changes are a no-op.
Then, we have to convince CLANG38/GOLD that there is no need to refer
to symbols via a GOT entry. This is done by forcing hidden visibility
for all symbols in all components that make up the PrePi SEC module:
this informs the linker that a symbol is never exported or preempted,
making it safe to refer to it directly from anywhere in the code,
rather than indirectly via a GOT entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Move some PCD settings outs of the [PcdsFixedAtBuild.AARCH64] block,
so that they apply to 32-bit ARM as well. Without this change, the
ARM build doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since 4 KB section alignment is required when mapping PE/COFF images
with strict permissions, update the default section alignment when
using GCC49 and GCC5 in RELEASE mode. Note that XIP modules such as
SEC, PEIMs or PEI core are not affected by this change, since the
override to 32 byte aligment remains in effect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Struct packing is only necessary for data structures whose in-memory
representation is covered by the PI or UEFI specs, and may deviate
from the ordinary C rules for alignment.
So in case of FileExplorerLib, this applies to the device path struct
only, and other structures used to carry program data should not be
packed, or we may end up with alignment faults on architectures such
as ARM, which don't permit load/store double or multiple instructions
to access memory locations that are not 32-bit aligned.
E.g., the following call in FileExplorerLibConstructor()
InitializeListHead (&gFileExplorerPrivate.FsOptionMenu->Head);
which is emitted as follows for 32-bit ARM/Thumb2 by Clang-5.0
3de0: b510 push {r4, lr}
3de2: 4604 mov r4, r0
...
3de8: e9c4 4400 strd r4, r4, [r4]
3dec: bd10 pop {r4, pc}
will perform a double-word store on the first argument, passed in
register r0, assuming that the pointer type of the argument is
enough to guarantee that the value is suitably aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=596
BaseLib interfaces are used in this library but not declared in module's
inf file. This patch fix this situation to keep inf and its code in
consistency. No functionality or interface change are involved.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1376
Today's implementation reuses the 32bit MMIO resource requested by
all PCI devices MMIO BARs when shadowing the option ROM.
Take a simple example, a system has only one PCI device. It requires
8MB 32bit MMIO and contains a 4MB option ROM. Today's implementation
only requests 8MB (max of 4M and 8M) 32bit MMIO from
PciHostBridgeResourceAllocation protocol. Let's assume the MMIO range
[3GB, 3GB+8MB) is allocated. The 3GB base address is firstly
programmed to the option ROM BAR for option ROM shadow. Then the
option ROM decoding is turned off and 3GB base address is programmed
to the 32bit MMIO BAR.
It doesn't cause issues when the device doesn't request too much
MMIO.
But when the device contains a 64bit MMIO BAR which requests 4GB MMIO
and a 4MB option ROM. Let's assume [3GB, 3GB+8MB) 32bit MMIO range is
allocated for the option ROM. When the option ROM is being shadowed,
64bit MMIO BAR is programmed to value 0, which means [0, 4GB) MMIO is
given to the 64bit BAR.
The range overlaps with the option ROM range which may cause the
device malfunction (e.g.: option ROM cannot be read out) when the
device has two separate decoders: one for MMIO BAR, the other for
option ROM.
The patch requests dedicated MEM32 resource for Option ROMs and
moves the Option ROM shadow logic after all MMIO BARs are programmed.
The MMIO BAR setting to 0 when shadowing Option ROM is also skipped
because the MMIO BAR already contains the correct value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The StandaloneMM image executes in S-EL0 on reference Arm platforms
and is deployed by the trusted firmware as BL32 image. Memory for the
Standalone MM drivers is marked as RW+XN initially, allowing the
drivers to be loaded into the memory. Once loaded, the memory
attributes need to be changed to RO+XN for rodata sections and RO+X
for code sections.
Achieve this through the extra action 'UpdatePeCoffPermissions' to
request the privileged firmware in EL3 to update the permissions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The MMU functions needed for StandaloneMM image are now exported
through a separate library class. Make the corresponding change in the
core's entry point inf file so that it references the correct library
class for modifying the MMU attributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Introduction of the -mstrict-align flag results in GCC attempting
to use memset to zero out the InitMmFoundationSvcArgs structure.
In the absence of this C library function, this patch explicitly
zeroes this data structure prior to use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
On AArch64, Standalone MM during the SEC phase runs in S-EL0 with
SCTLR_EL1.A=1. This patch adds the -mstrict-align compiler flag to
ensure that the generated code is compliant with the runtime
alignment checks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This patch fixes the dependency PL011UartLib has on PL011UartClockLib by
including its implementation path in the StandaloneMm DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This reverts commit 82379bf660.
On AArch64, we can only use 48 address bits while running in UEFI,
while the GCD and UEFI memory maps may describe up to 52 bits of
physical address space. For this reason, MAX_ADDRESS was reduced
to 48 bits, to ensure that the firmware does not inadvertently
attempt to allocate memory that we cannot access.
However, MAX_ADDRESS is used in runtime drivers as well, and
runtime drivers may deal with kernel virtual addresses, which have
bits [63:48] set. In fact, the OS may be running with 64 KB pages
and pass addresses into the runtime services that use up to 52
bits of address space, either with the top bits set or cleared,
even if the physical address space does not extend beyond 48 bits.
In summary, changing MAX_ADDRESS is a mistake, and needs to be
reverted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1361
This patch is going to correct the CCFlag
for building PcdValueInit
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to customize the deepcopy function for
SkuClass, PcdClassObject and python dictionary.
python deepcopy copy everything of a object, but for our current
usage we just need to copy the data we care about recursively.
By implementing __deepcopy__ for SkuClass, PcdClassObject, we can customize
deepcopy function for them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to use join function instead of
string += string2 statement.
Current code use string += string2 in a loop to combine
a string. while creating a string list in a loop and using
"".join(stringlist) after the loop will be much faster.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
[V2]
Optimize this patch so that it can be easy to review.
This patch is just apply the change to original files while
not create new similar files.
[V1]
This patch is one of build tool performance improvement
series patches.
This patch is going to use python list to store the parser data
instead of using sqlite database.
The replacement solution is as below:
SQL insert: list.append()
SQL select: list comprehension. for example:
Select * from table where field = “something”
->
[ item for item in table if item[3] == “something”]
SQL update: python map function. for example:
Update table set field1=newvalue where filed2 = “something”.
-> map(lambda x: x[1] = newvalue,
[item for item in table if item[2] == “something”])
SQL delete: list comprehension.
With this change, We can save the time of interpreting SQL statement
and the time of write database to file system
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Extract the common part of new API and the original main() function
into one function.
V1:
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
Currently, AutoGen and GenFds run in different python interpreters. The
parser are duplicated. This patch is going to create new API for GenFds
and have the build to call that API instead of executing GenFds.py. As
such, the GenFds and build can share the parser data.
This patch is expected to save the time of GenFds about 2~3 seconds.
More details will be logged in BZ.
This is the summary measure data generated from python cProfile for
building Ovmf.
Currently:
8379147 function calls (8135450 primitive calls) in 12.580 seconds
After applying this patch:
3428712 function calls (3418881 primitive calls) in 8.944 seconds
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Fixed the issue that V1 adds new check
to the Pcds in the platform unused library INF files.
It breaks the existing platform.
V1?
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add dummy RPC handler for RPCs that are not implemented as control
should be returned back to OP-TEE in case any RPC is invoked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
add a variable for the string '*' and then use it instead of lots of '*'
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
1) remove an identical function and import it from Common.LongFilePathSupport
2) remove an import that is not needed/used.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
The macro MAX_ADDRESS represents the largest virtual address that
is valid for a certain architecture. For the BaseTools, this quantity
is irrelevant, since the same tools can be used to build for different
targets.
Since we only refer to it in a single place, which is an ASSERT() that
doesn't seem particularly useful (it ensures that memcpy() will not
be called with arguments that will make it read beyond the end of the
address space and wrap around), let's drop the ASSERT and all references
to MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since DuetPkg is due to be removed, Maintainers.txt
should also be updated.
https://bugzilla.tianocore.org/show_bug.cgi?id=1322
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Given that DuetPkg will be removed, tools only used by
DuetPkg can also be removed after its removal operation.
https://bugzilla.tianocore.org/show_bug.cgi?id=1322
v2:Remove these tools in Makefile and GNUmakefile.
v4:Remove these tools in BinWrappers/PosixLike/ and
UserManuals.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DuetPkg depends on Legacy BIOS to provide a UEFI environment.
It was invented in the era when UEFI environment is hard to find.
Since now UEFI is very popular in PC area, we could stop the
official support of this package and remove it from the master.
https://bugzilla.tianocore.org/show_bug.cgi?id=1322
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The maximum value that can be represented by the native word size
of the *target* should be irrelevant when compiling tools that
run on the build *host*. So drop the definition of MAX_UINTN, now
that we no longer use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Parsing a string into an integer variable of the native word size
is not defined for the BaseTools, since the same tools may be used
to build firmware for different targets with different native word
sizes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the default size limit of IsDevicePathValid() with a value
that does not depend on the native word size of the build host.
4 GiB seems sufficient as the upper bound of a device path handled
by UEFI.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we will be dropping the definition of MAX_UINTN, whose meaning
is ambiguous for the BaseTools, add a definition of MAX_UINT32 that
we can switch to.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace invocations of StrHexToUintn() with StrHexToUint64(), so
that we can drop the former.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Don't use the native word size string to number parsing routines,
but instead, use the 64-bit one and cast to UINTN.
Currently, the only user is in Source/C/DevicePath/DevicePathFromText.c
which takes care to use Strtoi64 () unless it assumes the value fits
in 32-bit, so this change is a no-op even on 32-bit build hosts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the context of the BaseTools, there is no such thing as a native word
size, given that the same set of tools may be used to build a firmware
image consisting of both 32-bit and 64-bit modules.
So update StrToIpv4Address() and StrToIpv6Address() to use UINT64
types instead of UINTN types when parsing strings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GenVtf C tool is IPF specific. IPF support has been removed
from edk2 trunk. This tool can be removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1349
v2:Remove GenVtf in Makefile and GNUmakefile.
v3:Remove BinWrappers/PosixLike/GenVtf and the user manual
of GenVtf.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As Yonghong has some other focus, change him from maintainer
to reviewer, Bob will be the new maintainer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
QEMU/mach-virt is rather unhelpful when it comes to tracking down
NULL pointer dereferences that occur while running in UEFI: since
we have NOR flash mapped at address 0x0, inadvertent reads go
unnoticed, and even most writes are silently dropped, unless you're
unlucky and the instruction in question is one that KVM cannot
emulate, in which case you end up with a QEMU crash like this:
error: kvm run failed Function not implemented
PC=000000013f7ff804 X00=000000013f7ab108 X01=0000000000000064
X02=000000013f801988 X03=00000000800003c4 X04=0000000000000000
X05=0000000096000044 X06=fffffffffffd8270 X07=000000013f7ab4a0
X08=0000000000000001 X09=000000013f803b88 X10=000000013f7e88d0
X11=0000000000000009 X12=000000013f7ab554 X13=0000000000000008
X14=0000000000000002 X15=0000000000000000 X16=0000000000000000
X17=0000000000000000 X18=0000000000000000 X19=0000000000000000
X20=000000013f81c000 X21=000000013f7ab170 X22=000000013f81c000
X23=0000000009000018 X24=000000013f407020 X25=000000013f81c000
X26=000000013f803530 X27=000000013f802000 X28=000000013f7ab270
X29=000000013f7ab0d0 X30=000000013f7fee10 SP=000000013f7a6f30
PSTATE=800003c5 N--- EL1h
and a warning in the host kernel log that load/store instruction
decoding is not supported by KVM.
Given that the first page of the flash device is not actually
used anyway, let's reduce the mappings of the peripheral space
and the flash device (both of which cover page #0) to only cover
what is actually required:
ArmVirtQemu.fdf:
> 0x00001000|0x001ff000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
ArmVirtQemuKernel.fdf:
> 0x00008000|0x001f8000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
For ArmVirtQemu, the resulting virtual mapping looks roughly like:
- [0, 4K) : flash, unmapped
- [4K, 2M) : flash, mapped as WB+X RAM
- [2M, 64M) : flash, unmapped
- [64M, 128M) : varstore flash, will be mapped by the NOR flash driver
- [128M, 256M) : peripherals, mapped as device
- [256M, 1GB) : 32-bit MMIO aperture, translated IO aperture, ECAM,
will be mapped by the PCI host bridge driver
- [1GB, ...) : RAM, mapped.
After this change, any inadvertent read or write from/to the first
physical page will trigger a translation fault inside the guest,
regardless of the nature of the instruction, without crashing QEMU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The primary FV contains the firmware boot image, which is not
runtime updatable in our case. So exposing it to the NOR flash
driver is undesirable, since it may attempt to modify the NOR
flash contents. It is also rather pointless, since we don't
keep anything there that we care to expose. (the SEC and PEI
phase modules are not executable from DXE context, and the
contents of the embedded DXE phase FV are exposed by the DXE
core directly via the FVB2 protocol)
So let's disregard the NOR flash block that covers the primary
FV.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GetMemoryRegion() is used to obtain the attributes of an existing
mapping, to permit permission attribute changes to be optimized
away if the attributes don't actually change.
The current ARM code assumes that a section mapping or a page mapping
exists for any region passed into GetMemoryRegion(), but the region
may be unmapped entirely, in which case the code will crash. So check
if a section mapping exists before dereferencing it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1363
New PCD PcdVpdBaseAddress64 is added in MdeModulePkg.dec.
Its string token in MdeModulePkg.uni should match to its name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PcdPrePiCpuMemorySize is no longer used so drop the declarations from
the package DEC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ard Biesheuvel
Sumit Garg
Chen A Chen
Eric Dong
Jian J Wang
Ruiyu Ni
Sughosh Ganu
Achin Gupta
BobCF
Zhao, ZhiqiangX
Jaben Carsey
Shenglei Zhang
Chasel, Chiu
Yonghong Zhu
Liming Gao