Background:
For arch X64, system will enable the page table in SPI to cover 0-512G
range via CR4.PAE & MSR.LME & CR0.PG & CR3 setting (see ResetVector code).
Existing code doesn't cover the higher address access above 512G before
memory-discovered callback. That will be potential problem if system
access the higher address after the transition from temporary RAM to
permanent MEM RAM.
Solution:
This patch is to migrate page table to permanent memory to map entire physical
address space if CR0.PG is set during temporary RAM Done.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
UefiCpuPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib, remove the
dependency of UefiCpuLib.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3957
The reserved IDT table size in SecCore is too small for X64. Changed the type
of IdtTable in SEC_IDT_TABLE from UINT64 to IA32_IDT_GATE_DESCRIPTOR to have
sufficient size reserved in IdtTable for X64. dff
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add debug messages to make it easier to verify PlatformSecLib
is passing the data properly.
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Isaac Oram <isaac.w.oram@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the UefiCpuPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3492
Currently SecCore.inf having the resetvector code under IA32. if the
user wants to use both SecCore and UefiCpuPkg ResetVector it's not
possible, since SecCore and ResetVector(VTF0.INF/ResetVector.inf)
are sharing the same GUID which is BFV. to overcome this issue we can
create the Duplicate version of the SecCore.inf as SecCoreNative.inf
which contains pure SecCore Native functionality without resetvector.
SecCoreNative.inf should have the Unique GUID so that it can be used
along with UefiCpuPkg ResetVector in there implementation.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Cc: Digant H Solanki <digant.h.solanki@intel.com>
Cc: Sangeetha V <sangeetha.v@intel.com>
Signed-off-by: Ashraf Ali S <ashraf.ali.s@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1614
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3160
The GDT still in flash with commit 60b12e69fb
after TempRamDone
So move the action to TempRamDone event to avoid reading GDT from flash.
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
Adds a PEIM that republishes structures produced in SEC. This
is done because SEC modules may not be shadowed in some platforms
due to space constraints or special alignment requirements. The
SecMigrationPei module locates interfaces that may be published in
SEC and reinstalls the interface with permanent memory addresses.
This is important if pre-memory address access is forbidden after
memory initialization and data such as a PPI descriptor, PPI GUID,
or PPI inteface reside in pre-memory.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2776
Add a vector at 0xFF000 (0xFFFFF000) that can be used by Init-SIPI-SIPI
to start an AP before memory is initialized. This vector jumps into the
same SEC entry point as the ordinary reset vector, with a special value
of "AP" in the DI register. The platform-specific SEC code is expected
to check for that value and take a different path for APs, if this
feature is supported by the platform.
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Deric Cole <deric.cole@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2153
Current logic will skip searching EFI_PEI_CORE_FV_LOCATION_PPI when the
PPI in PpiList having EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag,
but platform may pass single PPI in PpiList that should be supported.
Changed the logic to verify PpiList first before checking
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag.
Test: Verified both single EFI_PEI_CORE_FV_LOCATION_PPI and multiple
PPIs in PpiList cases and both can boot with the PeiCore
specified by EFI_PEI_CORE_FV_LOCATION_PPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2136
SecPlatformMain is a platform hook function which let platform does
some update. Some platform may adjust SecCoreData->PeiTemporaryRamBase
which caused former saved AllSecPpiList variable invalid.
This patch update the logic to get AllSecPpiList after SecPlatformMain.
If SecPlatformMain() returns no platform-specific PPI list, then there
is nothing to merge, so we don't need "AllSecPpiList" at all.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1533
When SecCore and PeiCore in different FV, current
implementation still assuming SecCore and PeiCore are in
the same FV.
To fix this issue 2 FVs will be input parameters for
FindAndReportEntryPoints () and SecCore and PeiCore will
be found in each FV and correct debug information will
be reported.
Test: Booted with internal platform successfully.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1524
Previous commit 373c2c5b88,
missed one comment change that should be fixed.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1524
EFI_PEI_CORE_FV_LOCATION_PPI may be passed by platform
when PeiCore not in BFV so SecCore has to search PeiCore
either from the FV location provided by
EFI_PEI_CORE_FV_LOCATION_PPI or from BFV.
Test: Verified on internal platform and booting successfully.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Some redundant library classes Ppis and GUIDs
have been removed in inf, .c and .h files.
v2:
1.Remove ReadOnlyVariable2.h in S3Resume.c which should be
deleted in last version in which gEfiPeiReadOnlyVariable2PpiGuid
was removed.
2.Remove the library class BaseLib in CpuPageTable.c
which is included elsewhere.
3.Add library classes in SecCore.inf which are removed
at last version.
They are DebugAgentLib and CpuExceptionHandlerLib.
4.Add two Ppis in SecCore.inf which are removed
at last version.
They are gEfiSecPlatformInformationPpiGuid and
gEfiSecPlatformInformation2PpiGuid.
https://bugzilla.tianocore.org/show_bug.cgi?id=1043https://bugzilla.tianocore.org/show_bug.cgi?id=1013https://bugzilla.tianocore.org/show_bug.cgi?id=1032https://bugzilla.tianocore.org/show_bug.cgi?id=1016
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The function SecStartup() is not supposed to return. Hence, add the
NORETURN decorator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add SecPerformancePpiCallBack to get SEC performance data and
build HOB to convey the SEC performance data to DXE phase.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As HOB which has 8byte aligned requirement will be built based on them
in PEI phase.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
v2:
Per Laszlo and Andrew's comments at
https://lists.01.org/pipermail/edk2-devel/2016-November/004759.html
SecCoreData->StackBase is VOID * type. We should use %p to dump VOID * type.
SecCoreData->StackSize is UINTN type, but %x only could print unsinged-int
type. We will cast it to UINT32 firstly and then use %x to print it.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Dump new stack base and size information could help developer to narrow down
stack crash issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Currently, this is ASSERT() if neither SecPlatformInformation2 nor
SecPlatformInformation PPIs are found. This is not correct. Per PI specification
both of them are optional PPI. Platform may not install them.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Revert SecPlatformInformation2 and SecPlatformInformation in two comment blocks.
And correct the words.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
In SecTemporaryRamDone(), we will build one privated GUIDed-HOB to save CPU BIST
Data and re-install SEC platform information(2) PPI. Then other PEI drivers
could get CPU BIST data from the private GUIDed-HOB by new installed PPI.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Abstract one worker function to get CPU BIST from the GUIDed-HOB. Add
SecPlatformInformationBist() and SecPlatformInformation2Bist() to invoke
GetBistFromHob(). Add in/out for parameter in function header.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Add SecBist.c and copy GetBistInfoFromPpi() and SecPlatformInformation2() from
UefiCpuPkg/CpuMpPei/CpuBist.c. And update SecMain.c, SecMain.inf and
UefiCpuPkg.dsc accordinlgy to pass build.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
This patch adds the NORETURN attribute to the function that transfers
to the PEI phase, along with an UNREACHABLE() call at the end to
avoid false warnings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
To convert these files I ran:
$ python3 BaseTools/Scripts/ConvertUni.py UefiCpuPkg
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19264 6f19259b-4bc3-4df7-8a09-765794883524
Add SecCore module that uses the PlatformSecLib class for platform
specific actions. The SecCore module also uses a new PCD to
configure the size of the stack used in the SEC phase. If the
stack size PCD is set to 0, the stack is configured to use half
of the available temporary RAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18636 6f19259b-4bc3-4df7-8a09-765794883524
Jiaxin Wu
Rebecca Cran
Yu Pu
Kuo, Ted
Oram, Isaac W
Michael Kubacki
S, Ashraf Ali
Guomin Jiang
Michael Kubacki
Cole, Deric
Chasel Chiu
Eric Dong
Michael D Kinney
Zhang, Shenglei
chenc2
Marvin H?user
Liming Gao
Star Zeng
Dandan Bi
Jeff Fan
Jordan Justen