Remove extra qword in nasm code to make it pass build.
This file is only built in INTEL ICC compiler. So, there is missing
build check for it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
while-loop check should not co-exist with for-loop. This should be typo when we
check-in the original code. We should keep one loop only.
This issue caused CLANG38 build failure reported by
https://tianocore.acgmultimedia.com/show_bug.cgi?id=148
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The WIN_CERTIFICATE_UEFI_GUID AuthInfo defined in the UEFI spec
mentioned that It is a signature across the image data and the
Monotonic Count value. After clarification, we do the signature
calculation, we put MonotonicCount after Payload.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Jiewen Yao <jiewen.yao@intel.com>
In commit 5b2291f956 ("OvmfPkg: QemuVideoDxe uses
MdeModulePkg/FrameBufferLib"), QemuVideoDxe was rebased to
FrameBufferBltLib.
The FrameBufferBltLib instance added in commit b1ca386074
("MdeModulePkg: Add FrameBufferBltLib library instance") logs many
messages on the VERBOSE level; for example, a normal boot with OVMF can
produce 500+ "VideoFill" messages, dependent on the progress bar, when the
VERBOSE bit is set in PcdDebugPrintErrorLevel. While FrameBufferBltLib is
certainly allowed to log such messages on the VERBOSE level, we should
separate those frequent messages from the (infrequent) ones produced by
QemuVideoDxe itself.
QemuVideoDxe logs VERBOSE messages in three locations (in two functions)
at the moment. All of them are infrequent: both QemuVideoBochsModeSetup()
and InstallVbeShim() are called from QemuVideoControllerDriverStart(),
that is, when a device is bound. Upgrade these messages to INFO level, so
that VERBOSE can be disabled in PcdDebugPrintErrorLevel -- perhaps
selectively for OvmfPkg/QemuVideoDxe -- without hiding these infrequent
messages.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This field is (re)allocated in QemuVideoGraphicsOutputSetMode(), released
in QemuVideoGraphicsOutputDestructor(), and used for nothing else. Remove
it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This field is never used.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Thanks to the previous patch, this field is also unnecessary now. Remove
it.
The patch is best reviewed with "git show --word-diff".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This field is never used beyond assignment and debug-logging. Remove it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The entry point function of any UEFI_DRIVER that conforms to the UEFI
driver model must install an instance of the EFI_DRIVER_BINDING_PROTOCOL
on the image handle. Beyond that, the following protocols are optional:
- EFI_COMPONENT_NAME_PROTOCOL
- EFI_COMPONENT_NAME2_PROTOCOL
- EFI_DRIVER_CONFIGURATION_PROTOCOL
- EFI_DRIVER_CONFIGURATION2_PROTOCOL
- EFI_DRIVER_DIAGNOSTICS_PROTOCOL
- EFI_DRIVER_DIAGNOSTICS2_PROTOCOL
The UefiLib functions
- EfiLibInstallAllDriverProtocols()
- EfiLibInstallAllDriverProtocols2()
- EfiLibInstallDriverBindingComponentName2()
are convenience helpers for such UEFI_DRIVERs. They simplify the
installation of the above protocols.
The UefiLib instance in "MdePkg/Library/UefiLib/UefiDriverModel.c" allows
platforms to control these functions through the MdePkg feature PCDs
- PcdComponentNameDisable
- PcdComponentName2Disable
- PcdDriverDiagnosticsDisable
- PcdDriverDiagnostics2Disable
If any of these PCDs are set to TRUE, then the helper functions will not
install the corresponding protocol interfaces on the image handle, even if
the driver passes in non-NULL protocol interfaces.
In other words, at build time, a platform can forcibly prevent all drivers
that employ UefiLib from producing these protocols.
In ArmVirtPkg, that's what we've been doing forever, for no reason at all.
This is why we haven't been seeing component and driver names from the DH,
DEVICES, DRIVERS and DEVTREE shell commands, unlike in OvmfPkg.
The default value for all these PCDs is FALSE, in "MdePkg/MdePkg.dec".
Revert ArmVirtPkg to the sane defaults.
This bug dates back to the inception of ArmVirtPkg (called
ArmPlatformPkg/ArmVirtualizationPkg at the time).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 6f5872b1f4
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Adding Intel Firmware Version Info (FVI) related defines & structures.
FVI enables reporting the Firmware Versions using SMBIOS OEM Type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current ISCSI driver records redirected iSCSI targetIP/Port in iBFT
once redirection occurs, which removes the possibility of the OS
to reconnect to the configured IP for load balancing. The behavior
is not explicitly described in IBFT spec, though the MSFT expert
confirm we should record original user setting rather than
publish the redirected IP.
Thanks Sriram for reviewing and validating this patch in his test-bed.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
The current AsmGetFspInfoHeader function in FspHeader.nasm is
position dependent code since it uses absolute address. Change
to use relative address instead to make it position independent.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Clear up some help text for the TFTP shell command
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=141
This patch updates EDK II FDF parser in GenFds to allow sections
to be placed in any order in the FDF file.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Allows cd command to go back to the root directory when 'cd \' executed in system.
This change prevents last PathRemoveLastItem() call which truncates '\' from 'fs0:\'
in desired root path which is required to set CWD to the root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
The function with the variable parameters should have EFIAPI.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When PciBus is built as EBC, PcdPciDegradeResourceForOptionRom does
not have associated value resulting build failure.
The patch sets the default value to TRUE, covering the EBC ARCH.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Changes includes:
1.Check SMM device list before update it to avoid duplicate creation.
2.Clean up the configuration buffer before use it in S3 resume phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch extend the <FmpFileData> to support <FvStatements> and
<FdStatenents>, just like the normal [Capsule] section format.
In order to fix the bug https://bugzilla.tianocore.org/show_bug.cgi?id=132
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
One of the following patches will change QemuVideoDxe driver
to use the new FrameBufferLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek at redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
One of the following patches will change QemuVideoDxe driver
to use the new FrameBufferLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek at redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
The driver uses the GraphicsInfo HOB and GraphicsDeviceInfo HOB
passed from PEI to find the graphics controller to manage and
produce the GraphicsOutput protocol.
GraphicsInfo HOB and GraphicsDeviceInfo HOB are created by
a PEIM which initializes the graphics controller hardware in
PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in FatPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in FatPei and CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
SerialPortInitialize() set the BaudRate variable (type UINT64) as:
BaudRate = (UINTN)FixedPcdGet64 (PcdUartDefaultBaudRate);
This commit fixes a potential problem on ARM 32-bit builds, where the
UINTN type is defined as UINT32, by removing the cast:
BaudRate = FixedPcdGet64 (PcdUartDefaultBaudRate);
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Correct some obviously incorrect comments that have invalid details for
the returned values. (Copy /Paste problem?)
There are no functional changes in this commit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change updates PL011UartInitializePort to compare ReceiveFifoDepth
with the correct hardware FIFO size instead of the constant 32 used
previously.
This corrects a minor bug where a request for a fifo size > 15 and < 32
would not have been honoured on a system with a 16 byte FIFO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clear bits [31:24] after reading ACPI timer count by IoRead32(), and also add
comments "Note: The implementation uses the lower 24-bits of the ACPI timer
and is compatible with both 24-bit and 32-bit ACPI timers." in INF.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In GetInfo interface, current code copy real file name buffer
with full path file length. It should use real file name
length. This patch fix this error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
From PI spec vol2:
Prior to invoking any UEFI drivers, applications, or connecting consoles,
the platform should signal the event EFI_END_OF_DXE_EVENT_GUID
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Remove the variable which is set but not used to pass GCC build.
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Liming Gao
Hao Wu
Jeff Fan
Yonghong Zhu
Laszlo Ersek
Giri P Mudusuru
Ye Ting
Maurice Ma
Thomas Palmer
Michael Kinney
Tapan Shah
Ruiyu Ni
Fu Siyuan
Daniil Egranov
Bruce Cran
Eric Dong
Jiewen Yao
Alexei
Evan Lloyd
Star Zeng
Zhang, Chao B
Cinnamon Shia
Zhang Lubo
Bi, Dandan