https://bugzilla.tianocore.org/show_bug.cgi?id=629
Move Contributions.txt that contains the TianoCore
Contribution Agreement 1.0 to the root of the edk2
repository and remove the duplicate Contributions.txt
files from all packages.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to the Universal Flash Storage (UFS) Version 2.1 (JESD220C) spec
Section 10.7.8.5, the DATA SEGMENT LENGTH field of the UPIU shall also be
set to number of descriptor bytes to write.
The origin codes miss the above operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current SEC performance data getting code in FirmwarePerformancePei
may get wrong SEC performance data if FirmwarePerformancePei executes
after memory discovered.
And as SecCore has added SecPerformancePpiCallBack to get SEC performance
data and build HOB to convey the SEC performance data to DXE phase.
This patch is to remove the SEC performance data getting code in
FirmwarePerformancePei.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
InstallPpi() will be used for normal PPI in PPI list from SEC,
and NotifyPpi() will be used for notification PPI in PPI list from SEC.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When PiSmmCore links against PeiDxeDebugLibReportStatusCode, the code
flow below will cause a FreePool() assertion issue.
PiSmmCoreMemoryAllocationLibConstructor() ->
SmmInitializeMemoryServices() ->
DEBUG ((DEBUG_INFO, "SmmAddMemoryRegion\n")) in SmmAddMemoryRegion() ->
DebugPrint() -> REPORT_STATUS_CODE_EX() -> ReportStatusCodeEx() ->
AllocatePool()/FreePool(PiSmmCoreMemoryAllocLib) ->
ASSERT() at Head = CR (Buffer, POOL_HEAD, Data, POOL_HEAD_SIGNATURE)
in CoreFreePoolI() of DxeCore Pool.c
It is because at the point of FreePool() in the code flow above,
mSmmCoreMemoryAllocLibSmramRanges/mSmmCoreMemoryAllocLibSmramRangeCount
are not been initialized yet, the FreePool() will be directed to
gBS->FreePool(), that is wrong.
This patch is to temporarily use BootServicesData to hold the
SmramRanges data before calling SmmInitializeMemoryServices().
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PciScanBus() assumes the GetResourcePadding() puts BUS descriptor
in the very beginning, if it's not, the Descriptors will be updated
to point to middle of the pool buffer, which can cause
FreePool(Descriptors) hang in DEBUG image.
No functionality impact to RELEASE image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Refine the comments.
In UI page, some configuration change may require system reset.
BootMaintenanceManagerUiLib misses this check before exiting UiApp
to boot other boot options. Now add the check.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: Refine the comments.
In UI page, some configuration change may require system reset.
BootManagerUiLib misses this check before exiting UiApp to boot
other boot options. Now add the check.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After calling SendForm to enter front page, configuration change in some
driver may require system reset. Currently the reset status is saved in
SendForm level. Then SendForm can return the reset status.
IsResetRequired API also can return the reset status before exiting browser.
It return the reset status in current SendForm level now. But SendForm can
be recursive called by some module.so the reset status in previous SendForm
may be lost. Now change the IsResetRequired API to return the reset info no
matter the reset is caught in any SendForm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=644
According to XHCI spec:
4.10.2.1 Stall Error
4.10.2.4 Babble Detected Error
When a device transmits more data on the USB than the host controller
is expecting for a transaction, it is defined to be babbling.
In general, this is called a Babble Error. When a device sends more
data than the TD Transfer Size bytes (TD Babble), unexpected activity
that persists beyond a specified point in a (micro)frame (Frame Babble),
or a packet greater than Max Packet Size (Packet Babble), the host
controller shall set the Babble Detected Error in the Completion Code
field of the TRB, generate an Error Event, and halt the endpoint
(refer to Section 4.10.2.1).
This patch is to also check for EFI_USB_ERR_BABBLE error returned as
a TransferResult and then proceed to XhcRecoverhaltedEndPoint.
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=593
Currently, SmmCommunciate fails in RestoreLockBox after
SmmReadyToLock since COMM buffer is in stack instead of
using SmmCommRegion by gEdkiiPiSmmCommunicationRegionTableGuid.
This patch is to get SmmCommRegion by
gEdkiiPiSmmCommunicationRegionTableGuid for COMM buffer
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The patch fixes two kinds of bugs in DxeCore that accesses memory
which might be freed or owned by other modules.
The two bugs don't cause functionality issue.
1. CoreValidateHandle() checks whether the handle is valid by
validating its signature. The proper way is to check whether
the handle is in the handle database.
2. CoreDisconnectControllersUsingProtocolInterface() and
CoreOpenProtocol() de-reference Link pointer which is
already freed. The proper way is to not de-reference the pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Adds the implementation of Disk Information Protocol for EMMC devices per
PI 1.6 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Adds the implementation of Disk Information Protocol for SD devices per
PI 1.6 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=433
When a blocking NVMe PassThru request experiences timeout, the current
codes in function NvmExpressPassThru() do not abort the timeout request
while advancing synchronous Submission Queue tail. Therefore, it is
possible to submit a new blocking PassThru request when the synchronous
Submission Queue is full.
The commit adds logic to abort the timeout request by resetting the NVMe
controller when a timeout occurs for a blocking PassThru request.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This fixes BULK data loss when transfer is detected as timeout but
finished just before stopping endpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
The patch separates the common logic in XhcControlTransfer,
XhcBulkTransfer and XhcSyncIntTransfer to a sub-routine
XhcTransfer. It doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Current implementation of IsTransferRingTrb only checks whether
the TRB is in the RING of the URB.
The patch enhanced the logic to check that whether the TRB belongs
to the transaction of URB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=614
Print (L"CapsuleApp: capsule data starts at 0x%X with
size 0x%X\n", (UINTN) CapsuleBuffer, FileSize);
It should use (UINTN) CapsuleBuffer[Index] and FileSize[Index]
as parameter.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Cloud Wang <winggundum82@163.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update the comments of ResetSystem() that was missed by
37078045d7 and 28426918f0.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The SATA spec mandates that link detection by the PHY completes within
10 ms after receiving a reset signal. However, there is no obligation
to uphold this requirement at the driver end as strictly as we do, and
as it turns out, some combinations of host and device (e.g., Samsung
850 EVO connected to a LeMaker Cello) are only borderline compliant,
which means the device is not detected reliably.
So let's allow for a bit of margin, and increase the PHY detect timeout
value to 15 ms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update code to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Report Status Code to indicate BDS starts attempting booting
from the UEFI BootOrder list.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
There is a case that ExtractGuidedSectionGetInfo return 0 for
ScratchBufferSize and ScratchBuffer will be NULL, after AllocatePool
fails to allocate buffer for AllocatedOutputBuffer, the code will
call FreePool (ScratchBuffer), but ScratchBuffer == NULL.
This patch is to only free ScratchBuffer when it is not NULL.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Change since v3:
1) Fixed issue when Attributes = EFI_OPEN_PROTOCOL_TEST_PROTOCOL
and Inteface = NULL case. [Reported by:star.zeng at intel.com]
Change Since v2:
1) Modified to use EFI_ERROR to get status code
Change since v1:
1) Fixed typo protocal to protocol
2) Fixed coding style
Modified source code to update Interface as per spec.
1) In case of Protocol is un-supported, interface should be returned NULL.
2) In case of any error, interface should not be modified.
3) In case of Test Protocol, interface is optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Amit Kumar <amit.ak@samsung.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current code is using debug message like below for
InstallProtocolInterface.
InstallProtocolInterface: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX XXX
User could not know whether the installation is failed or not by the
debug message, for example, the code below does not initialize Handle
before calling InstallProtocolInterface, EFI_INVALID_PARAMETER will be
returned.
EFI_HANDLE Handle;
Status = gBS->InstallProtocolInterface (
&Handle,
&XXX,
EFI_NATIVE_INTERFACE,
XXX
);
This patch is to add additional debug message if the installation
is failed and specific debug message for the case that the input
handle is invalid.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Return EFI_INVALID_PARAMETER in LocateProtocol for Protocol==NULL to
follow UEFI 2.7 spec
PiSmmCore is also updated as the EFI_SMM_SYSTEM_TABLE2.SmmLocateProtocol
is reusing the definition of EFI_LOCATE_PROTOCOL.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=601
When installing configuration table and the original
gDxeCoreST->ConfigurationTable[] buffer happen to be not big enough to
add a new table, the CoreInstallConfigurationTable() enter the branch
of line 113 in InstallConfigurationTable.c to free the old
gDxeCoreST->ConfigurationTable[] buffer and allocate a new bigger one.
The problem happens at line 139 CoreFreePool(), which is to free the
old gDxeCoreST->ConfigurationTable[] buffer. The CoreFreePool()'s
behavior is to free the buffer firstly, then call the
InstallMemoryAttributesTableOnMemoryAllocation (PoolType) to update
the EfiRuntimeServices type memory info, the
CoreInstallConfigurationTable() will be re-entered by CoreFreePool()
in its calling stack, then use-after-free read error will happen at
line 59 of InstallConfigurationTable.c and use-after-free write error
will happen at line 151 and 152 of InstallConfigurationTable.c.
The patch is to update System table to the new table pointer before
calling CoreFreePool() to free the old table.
The case above is in DxeCore, but not in PiSmmCore.
The change in PiSmmCore is to be consistent with DxeCore.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=592
In function UpdateConsoleContent, we compare console name
with "ErrOut" string to check whether the content in console
Error device page has been changed. But when call function
UpdateConsoleContent, we pass console name as "ConErr" by mistake.
This patch is to fix the inconsistent issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Related to the ECR for support of HTTP Redirect (308)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This path is to refine the PXE boot displayed information so as to
in line with NetworkPkg/UefiPxeBcDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Currently implementation doesn't accept the input during the user
is trying to select the PXE BootMenu from option 43. This path is
to fix that problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Michael D Kinney
Hao Wu
Jiaxin Wu
Star Zeng
Ruiyu Ni
Bi, Dandan
Liming Gao
Eric Dong
Bi, Dandan
Ard Biesheuvel
Amit Kumar
Shi, Steven
hegdenag