Some USB devices don't report data periodically through Int
Transfer. They report data only when be asked. If the TRB
is not removed from the XHCI HW, when next time HOST asks
data again, the data is reported but consumed by the previous
TRB, which results the HOST thinks data never comes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When "reconnect -r" is typed in shell, UsbFreeInterface() is called
to uninstall the UsbIo and DevicePath. But When a UsbIo is opened
by a driver and that driver rejects to close the UsbIo in Stop(),
the uninstall doesn't succeed.
But UsbFreeInterface () frees the DevicePath memory without check
whether the uninstall succeeds.
It leads to the DXE core database contain a DevicePath instance but
that instance's memory is freed.
Assertion happens when someone calls InstallProtocol(DevicePath)
because the InstallProtocol() checks all DevicePath instance to
find whether the same one exits in database.
We haven't seen any USB device driver which rejects to close UsbIo
in Stop(), but it's very likely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=510
The commit fills the 'Interval' field of the Endpoint Context data for
isochronous endpoints. It will resolve the error when a Configure
Endpoint Command is sent to an isochronous endpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=567
In functions DxePrintLibPrint2ProtocolVaListToBaseList() and
InternalPrintLibSPrintMarker(), when processing ASCII format strings, if
the format string walker pointer 'Format' is pointing at the end of the
format string (i.e. '\0'), the following expression:
*(Format + 1)
will read an undefined value.
Though this value won't affect the functionality, since it will be masked
by variable 'FormatMask':
(*(Format + 1) << 8)) & FormatMask
(FormatMask is 0xff for ASCII format string)
This commit adds additional logic to avoid reading undefined content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=572
Update X64 AsmFuncs.S to resolve a build failure using the
XCODE5 tool chain. This change updates AsmFuncs.S to match
AsmFuncs.asm and AsmFuncs.nasm.
The error generated in XCODE5 build is:
error: invalid instruction mnemonic 'movzxw'
movzxw 8(%rax), %rax
^~~~~~
The correct instruction is
movzwq 8(%rax), %rax
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=572
The ErrorMessage local variable in OnigurumaMatch() should
be type OnigUChar instead of type CHAR8. This resolves
a build failure with the XCODE5 tool chain.
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=570
Use PdbStringOffset to get PDB info, it will have no functional impact,
and will just make the code more generic.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=568
Use fixed data type in data structure and make the structure
be natural aligned.
Without this update, the code must assume DXE and SMM are using
same data type (same size of UINTN), but it may be not true at
some case, for example, after standalone SMM feature is enabled.
With this update, the data structure will be phase independent
and convenient for consumer to parse the data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=569
The PdbStringOffset should be set to 0 for no PDB case,
then SmiHandlerProfileInfo can use it to know whether
there is PCD info or not.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=554
Update LogoDxe module to print a DEBUG() message and exit
with an error instead of ASSERT_EFI_ERROR() if the HII
Image Package with the logo image is not present.
If a tool chain does not support generation of PE/COFF
resource sections, then this module can not produce the logo
from an HII Image Package. XCODE5 is an example of a tool
chain that does not currently support generation of PE/COFF
resource sections.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
KeyOption points to a buffer holding the content of Key####.
So its size is smaller than EFI_BOOT_MANAGER_KEY_OPTION.
Old code to assign value to KeyOption->OptionNumber modifies
the memory outside of the KeyOption buffer.
The patch fixes this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
When DynamicEx PCD is only used in PEI code, but not DXE code,
current implementation of DxePcdGetNextTokenSpace does not assign
TmpTokenSpaceBufferCount correctly, but leaves it as initial value,
then DxePcdGetNextTokenSpace may return incorrect token space guid
and status.
This patch is to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If IOMMU protocol is installed, PciBus need call IOMMU
to set access attribute for the PCI device in Map/Ummap.
Only after the access attribute is set, the PCI device can
access the DMA memory.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Previous patch Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Previous patch Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
If IOMMU protocol is installed, PciHostBridge just calls
IOMMU AllocateBuffer/FreeBuffer/Map/Unmap.
PciHostBridge does not set IOMMU access attribute,
because it does not know which device request the DMA.
This work is done by PciBus driver.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Previous patch Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Previous patch Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
This protocol is to abstract DMA access from IOMMU.
1) Intel "DMAR" ACPI table.
2) AMD "IVRS" ACPI table
3) ARM "IORT" ACPI table.
There might be multiple IOMMU engines on one platform.
For example, one for graphic and one for rest PCI devices
(such as ATA/USB).
All IOMMU engines are reported by one ACPI table.
All IOMMU protocol provider should be based upon ACPI table.
This single IOMMU protocol can handle multiple IOMMU engines on one system.
This IOMMU protocol provider can use UEFI device path to distinguish
if the device is graphic or ATA/USB, and find out corresponding
IOMMU engine.
The IOMMU protocol provides 2 capabilities:
A) Set DMA access attribute - such as write/read control.
B) Remap DMA memory - such as remap above 4GiB system memory address
to below 4GiB device address.
It provides AllocateBuffer/FreeBuffer/Map/Unmap for DMA memory.
The remapping can be static (fixed at build time) or dynamic (allocate
at runtime).
4) AMD "SEV" feature.
We can have an AMD SEV specific IOMMU driver to produce IOMMU protocol,
and manage SEV bit.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Previous patch Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Previous patch Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
For function UfsPassThruGetTargetLun(), the length of the input device
node specified by 'DevicePath' should be compared with the size of
'UFS_DEVICE_PATH' rather than the size of 'SCSI_DEVICE_PATH'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=530
In DumpSmiChildContext() of SmiHandlerProfile.c and
SmiHandlerProfileInfo.c, the return buffer from
ConvertDevicePathToText() should be freed after used.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=529
LineWidth of option in funcrion UpdateSkipInfoForMenu and DisplayOneMenu
are inconsistent. Now fix this issue to avoid incorrect UI display.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The RFC1323 which defines the TCP window scale option has been obsoleted by RFC7323.
This patch is to follow the RFC7323 to address the TCP window retraction problem
when a non-zero scale factor is used.
The changes has been test in high packet loss rate network by using HTTP boot and
iSCSI file read/write.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Moving Right window edge to the left on sender side without additional check
can lead to the TCP deadlock, when receiver ACKs proper segment, while sender
discards it for future ACK. To prevent this add check if usable window (or
shrink amount in this case) is bigger then receiver's window scale factor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrey Tepin <atepin@kraftway.ru>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
if we already established a iSCSI connection from initiator to target
based on IPv4 stack, after using reconnect -r command, we can not rebuild
the session with the windows target, since the server thought the session
is still exist. This issue is caused by wrong place of acquire ownership of
sock lock which lead the iSCSI can not reset the connection correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Below value indicate whether network address configured successfully
or not:
Network Device List->MAC->IPv4 Network Configuration->Configured.
This patch is to refine its help info.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
SmramBase should be got from mLMFAConfigurationTable.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In function UfsHcDriverBindingStart(), the return value 'Status' may be
overridden during the original PCI attributes restore process.
This commit refines the logic to avoid such override.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The commit removes the unused field 'EFI_HANDLE Handle' in Ufs host
controller private data structure 'UFS_HOST_CONTROLLER_PRIVATE_DATA'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In case of an async command if updating the submission queue tail
doorbell fails then the command will not be picked up by device and
no completion response will be created. This scenario has to be handled.
Also if we create an AsyncRequest element and insert in the async queue,
it will never receive a completion so in the timer routine this element
won't be freed, resulting in memory leak. Also in case of blocking calls
we should capture the status of updating completion queue head doorbell
register and return it to caller of PassThru.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Suman Prakash <suman.p@samsung.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
v3:
* Add NULL string check.
v2:
* Define new STR_FORM_NETWORK_DEVICE_TITLE_HEAD for L" Network Device "
instead of hard code in the code.
Network device tile (STR_FORM_NETWORK_DEVICE_TITLE) is dynamic adjusted
according the different MAC value. So, the string value shouldn't be treated
as a constant string (Network Device). Otherwise, the display will be
incorrect.
Reproduce: Device Manager->Network Device List, select to enter MAC, then to
press ESC back to previous page, then re-enter, found each enter/ESC operation,
the MAC address display +1.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When a load option points to a physical UsbIo controller, whose
device path contains UsbClass or UsbWwid node, old logic
unconditionally treats it as a short-form device path and expands
it. But the expanding gets the exactly same device path, and the
device path is passed to BmGetNextLoadOptionDevicePath() which
then passes this device path to BmExpandUsbDevicePath() again.
This causes a infinite recursion.
The patch avoids the USB short-form expanding when the device path
points to a physical UsbIo controller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
This solution is equivalent to DXE core.
AllocatePool() allocates POOL_TAIL after the buffer.
This POOL_TAIL is checked at FreePool().
If the there is buffer overflow, the issue can be caught at FreePool().
This patch could also handle the eight-byte aligned allocation
requirement. The discussion related to the eight-byte aligned
allocation requirement is at
https://lists.01.org/pipermail/edk2-devel/2017-April/009995.html.
According to the PI spec (Vol 4, Section 3.2 SmmAllocatePool()):
The SmmAllocatePool() function ... All allocations are eight-byte aligned.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In the origin codes, the host sets the fDeviceInit flag to initiate device
initialization, but does not check whether the device resets this flag
to indicate the device initialization is completed.
Details can be referred at UFS 2.0 Spec Section 14.2 - Flags.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When TerminalDxe Start() is called multiple times, the old logic
unconditionally appended the terminal device path candidates to
*Dev (ConInDev/ConOutDev/ErrOutDev), resulting the volatile storage
is full.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
An example:
The codes in function Output8bitPixel in Image.c:
OffsetY = BITMAP_LEN_8_BIT ((UINT32) Image->Width, Ypos);
Both Image->Width and Ypos are of type UINT16. They will be promoted to
int (signed) first, and then perform the multiplication defined by macro
BITMAP_LEN_8_BIT. If the result of multiplication between Image->Width and
Ypos exceeds the range of type int, a potential incorrect results
will be assigned to OffsetY.
This commit adds explicit UINT32 type cast for 'Image->Width' to avoid
possible overflow in the int range. And also fix similar issues in
HiiDatabase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When initializing ConsoleOutCheck/ConsoleInCheck/ConsoleErrCheck array in
BMM_FAKE_NV_DATA structure, also need to consider whether the terminal
device is ConOut/ConIn/ConErr or not.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BootMenuSelectItem() contains code to DIV BootMenuData->ItemCount.
When BootMenuData->ItemCount can be 0, the DIV operation may
trigger CPU exception.
But in logic, this case won't happen. So add assertion to indicate
it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Current CapsuleApp only supports input/output file from rootdirectory.
If the CapsuleApp and related file are put into subdirectory,
below message will be shown when running the CapsuleApp in shell.
"CapsuleApp: capsule image (Capsule image file name) is not found."
This patch is to add directory support for CapsuleApp
by using shell protocol.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
For function SplitRecord() in file PropertiesTable.c, there is a
potential subtract underflow case for line:
return TotalNewRecordCount - 1;
However, such case will not happen since the logic in function
SplitTable() ensure that when calling SplitRecord(), the variable
'TotalNewRecordCount' will not be zero when performing the subtraction.
It will be handled in the previous if statement:
if (MaxSplitRecordCount == 0) {
CopyMem (NewRecord, OldRecord, DescriptorSize);
return 0;
}
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In V2, change logic to avoid use mtf[-1] style to get value.
Roll back to previous logic, and use point + offset to get byte value.
Cc: Bell Song <binx.song@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bell Song <binx.song@intel.com>
In function PeiUsbReadCapacity(), the following expression:
LastBlock = (Data.LastLba3 << 24) |
(Data.LastLba2 << 16) |
(Data.LastLba1 << 8) |
Data.LastLba0;
(There is also a similar case in function PeiUsbReadFormattedCapacity().)
will involve undefined behavior in signed left shift operations.
Since Data.LastLbaX is of type UINT8, they will be promoted to int (32
bits, signed) first, and then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Data.LastLba3 is 1, (Data.LastLba3 << 24) will be out of
the range within int type. The undefined behavior of the signed left shift
might incur potential issues.
This commit will add an explicit UINT32 type cast for Data.LastLba3 to
refine the codes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In function UfsBlockIoPeimGetMediaInfo(), the following expression:
Private->Media[DeviceIndex].LastBlock = (Capacity16.LastLba3 << 24) |
(Capacity16.LastLba2 << 16) |
(Capacity16.LastLba1 << 8) |
Capacity16.LastLba0;
(There is also a similar case in this function.)
will involve undefined behavior in signed left shift operations.
Since Capacity16.LastLbaX is of type UINT8, and
Private->Media[DeviceIndex].LastBlock is of type UINT64. Therefore,
Capacity16.LastLbaX will be promoted to int (32 bits, signed) first, and
then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Capacity16.LastLba3 is 1, (Capacity16.LastLba3 << 24) will
be out of the range within int type. The undefined behavior of the signed
left shift will lead to a potential of setting the high 32 bits of
Private->Media[DeviceIndex].LastBlock to 1 during the cast from type int
to type UINT64.
This commit will add an explicit UINT32 type cast for Capacity16.LastLba3
to resolve this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In function ReadCapacity(), the following expression:
MediaInfo->LastBlock = (Data.LastLba3 << 24) |
(Data.LastLba2 << 16) |
(Data.LastLba1 << 8) |
Data.LastLba0;
(There is also a similar case in this function.)
will involve undefined behavior in signed left shift operations.
Since Data.LastLbaX is of type UINT8, and MediaInfo->LastBlock is of type
UINTN. Therefore, Data.LastLbaX will be promoted to int (32 bits, signed)
first, and then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Data.LastLba3 is 1, (Data.LastLba3 << 24) will be out of
the range within int type. The undefined behavior of the signed left shift
will lead to a potential of setting the high 32 bits of
MediaInfo->LastBlock to 1 during the cast from type int to type UINT64
for X64 builds.
This commit will add an explicit UINT32 type cast for Data.LastLba3 to
resolve this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In function GetMediaInfo(), the following expression:
ScsiDiskDevice->BlkIo.Media->LastBlock = (Capacity10->LastLba3 << 24) |
(Capacity10->LastLba2 << 16) |
(Capacity10->LastLba1 << 8) |
Capacity10->LastLba0;
will involve undefined behavior in signed left shift operations.
Since Capacity10->LastLbaX is of type UINT8, and
ScsiDiskDevice->BlkIo.Media->LastBlock is of type UINT64. Therefore,
Capacity10->LastLbaX will be promoted to int (32 bits, signed) first,
and then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Capacity10->LastLba3 is 1, (Capacity10->LastLba3 << 24)
will be out of the range within int type. The undefined behavior of the
signed left shift will lead to a potential of setting the high 32 bits
of ScsiDiskDevice->BlkIo.Media->LastBlock to 1 during the cast from type
int to type UINT64.
This commit will add an explicit UINT32 type cast for
Capacity10->LastLba3 to resolve this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This commit makes sure that in function CoreStartImage(), module
variable 'mCurrentImage' is restored to the current start image context
on all code paths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GCC -fno-builtin option is added into tools_def.template at
90defe7198.
So, there is no need to set it in module INF file.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Old implementation only finds first matched full device path for a
given short-form device path.
The patch adds internal function BmGetNextLoadOptionBuffer() to finds
all matched full device path for a given short-form device path.
There are 6 kinds of device paths. Some of them match to multiple
load options, some of them don't.
1. Media device path:
Returns multiple load options: The media device path may point
to a physical BlockIo which contains multiple logic partitions,
each logic partitions contains \EFI\BOOT\BOOT${ARCH}.EFI.
2. Short-form hard-drive device path:
Returns one load option because the partition signature is unique.
3. Short-form file-path device path:
Returns multiple load options: There are multiple SimpleFileSystem
instances and each contains the same file.
4. Short-form URI device path:
Returns multiple load options: There are multiple LoadFile
instances and each can boot.
5. Short-form USB device path:
Returns multiple load options: There are multiple UsbIo instances
and each contains the boot-able file.
6. FV device path, device path pointing to SimpleFileSystem, device
path pointing to LoadFile
Returns one load option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
This API is used to display exception type and all processor context for debug
purpose.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=442
PcdExpression used in INF to control PCD and Source is unsupported feature.
Current sample usage in module INF brings confuse.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Given the agreement on the edk2-devel regarding the fact that the
notion whether or not a 'platform has ACPI' is a universal one, move
the PlatformHasAcpi GUID to MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Fix the incorrect comparison between pointer and constant zero character.
https://bugzilla.tianocore.org/show_bug.cgi?id=416
V2: The pointer StringPtr points to a string returned
by ExtractConfig/ExportConfig, if it is NULL, function
InternalHiiIfrValueAction will return FALSE. So in
current usage model, the StringPtr can not be NULL before
using it, so we can add ASSERT here.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Issue reported at bugzillar 445.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The EFI_IMAGE_MACHINE_TYPE_SUPPORTED() macro is abused in the PeiCore
code to decide whether the system we are compiling for can deal with
executable code being copied elsewhere and executed from there.
As stated in the comment, this is fundamentally a property of the compiler
target, and so this should be made dependent on MDE_CPU_xxx preprocessor
defines, and not on whether or not the runtime target can deal with
PE/COFF images of a certain machine type.
On X86/IA32, this mostly boils down to the same thing, but not on other
architectures, so let's clean this up.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the PE/COFF image memory protection code uses the same code
paths for protecting and unprotecting an image. This is strange, since
unprotecting an image involves a single call into the CPU arch protocol
to clear the permission attributes of the entire range, and there is no
need to parse the PE/COFF headers again.
So let's store the ImageRecord entries in a linked list, so we can find
it again at unprotect time, and simply clear the permissions.
Note that this fixes a DEBUG hang on an ASSERT() that occurs when the
PE/COFF image fails to load, which causes UnprotectUefiImage() to be
invoked before the image is fully loaded.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The BGRT table has an 8 byte field for the memory address of the image
data, and yet the driver explicitly allocates below 4 GB. This results
in an ASSERT() on systems that do not have any memory below 4 GB to begin
with.
Since neither the PI, the UEFI or the ACPI spec contain any mention of
why this data should reside below 4 GB, replace the allocation call
with an ordinary AllocatePages() call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Invocations of EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() may
result in a crash when the value of PcdAcpiExposedTableVersions does
not include EFI_ACPI_TABLE_VERSION_1_0B.
The reason is that EFI_ACPI_TABLE_PROTOCOL::InstallAcpiTable() will
only populate the Rsdt1/Rsdt3 pointers when EFI_ACPI_TABLE_VERSION_1_0B
is set, whereas EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() will
invoke PublishTables with EFI_ACPI_TABLE_VERSION_1_0B alawys set,
resulting in a NULL pointer dereference of the Rsdt1/Rsdt3 pointers.
So take PcdAcpiExposedTableVersions into account for UninstallAcpiTable
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=388
Add -NR (no-reset) option support, once the option is specified,
no reset will be trigger for the capsule with flag
CAPSULE_FLAGS_PERSIST_ACROSS_RESET and no CAPSULE_FLAGS_INITIATE_RESET.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Xiaofeng Wang <winggundum82@163.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
For async commands, the buffer allocated for Prp list is
not getting freed, which will cause memory leak for async
read write command. For example testing async command flow
with custom application to send multiple read write commands
were resulting in decrease of available memory page in memmap,
which eventually resulted in system hang. Hence freeing
AsyncRequest->MapData, AsyncRequest->MapMeta, AsyncRequest->MapPrpList and
AsyncRequest->PrpListHost when async command is completed.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Suman Prakash <suman.p@samsung.com.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
UEFI executables that consist of a single read+write+exec PE/COFF section
trigger this message, but such a binary layout isn't actually an error.
The image can be launched alright, only image protection cannot be applied
to it fully.
One example that elicits the message is (some) Linux kernels (with the EFI
stub of course).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RamDiskDxe installs the RamDiskAcpiCheck() Ready To Boot callback
function. If EFI_ACPI_TABLE_PROTOCOL and/or EFI_ACPI_SDT_PROTOCOL are not
found, then informational messages are logged, and the RAM disks are not
published to the (nonexistent) NFIT table.
The logic is fine, but the info messages are not concatenated correctly
from multiple string literals -- the second parts are passed as (unused)
arguments to DEBUG(). Fix the typos.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Move the definition of variable "mEsrtTable" and
"mIsVirtualAddrConverted" to DxeCapsuleLib.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: jiewen.yao@intel.com
When attempting to perform page allocations using AllocateAddress, we
fail to check whether the entire region is free before splitting the
region. This may lead to memory being leaked further into the routine,
when it turns out that one of the memory map entries intersected by the
region is already occupied. In this case, prior conversions are not rolled
back.
For instance, starting from this situation
0x000040000000-0x00004007ffff [ConventionalMemory ]
0x000040080000-0x00004009ffff [Boot Data ]
0x0000400a0000-0x000047ffffff [ConventionalMemory ]
a failed EfiLoaderData allocation @ 0x40000000 that covers the BootData
region will fail, but leave the first part of the allocation converted,
so we end up with
0x000040000000-0x00004007ffff [Loader Data ]
0x000040080000-0x00004009ffff [Boot Data ]
0x0000400a0000-0x000047ffffff [ConventionalMemory ]
even though the AllocatePages() call returned an error.
So let's check beforehand that AllocateAddress allocations are covered
by a single memory map entry, so that it either succeeds or fails
completely, rather than leaking allocations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
198a46d768 improved the DSDT and X_DSDT
fields mutual exclusion by checking FADT revision, but that breaks
some OS that has assumption to only consume X_DSDT field even the
DSDT address is < 4G.
To have better compatibility, this patch is to update the code to not
make FADT.{DSDT,X_DSDT} mutual exclusion, but always set both DSDT and
X_DSDT fields in the FADT when the DSDT address is < 4G.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Jeff Fan <jeff.fan@intel.com>
The original logic assumes GOP hande is son of PCI handle but it
is not always true.
Below wordings are from UEFI Spec:
If a graphics device supports multiple frame buffers, then
handles for the frame buffers must be created first, and then the
handles for the video output devices can be created as children of
the frame buffer handles.
So the GOP handle could be grandson of the PCI handle.
EfiBootManagerGetGopDevicePath(VideoController) is used to fix
this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
v2: Handle error case in SockCreateChild and fix typo issue
when we destroy the socket Sock and its associated
protocol control block, we need to first close the
parent protocol, then remove the protocol from childHandle
and last to free any data structures that allocated in
CreateChild. But currently, we free the socket data
(Socket ConfigureState) before removing the protocol
form the childhandle. So if the up layer want to send the
tcp reset packet in it's driver binding stop function, it will failed.
The IpInstance destroy state is redundant and may cause
ip transmit failed if up layer want to send ip packet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Http boot on X64 platform is faild, this is caused by the incorrect
type conversion when getting port number from Url.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
* Add the check in Ip4Config2SetDefaultIf to avoid the DHCP configuration
case.
Ip4config2 doesn't check the validity of Ip/Netmask pair, which
leads to the invalid combination of Ip and Netmask setting.
This patch is to resolve the issue.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
The previous patch has problem on handling capsule
request at runtime.
This patch fixed the issue.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Current PI spec has no clear description about whether the
SkuId could be changed multiple times or not during one boot.
If the SkuId could be changed multiple times during one boot,
different modules may get inconsistent PCD values.
And DynamicHii PCD maps to UEFI variable, once one DynamicHii
PCD(UEFI variable) is set for one SkuId, then the PCD value
will be always from UEFI variable but not PCD database, even
the SkuId is set to other value.
This patch is to update PCD drivers to allow SkuId to be
changed only once during one boot.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=370
Use GLOBAL_REMOVE_IF_UNREFERENCED for some memory profile global variables,
then their symbols could be removed when memory profile is disabled.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=370
Use GLOBAL_REMOVE_IF_UNREFERENCED for some SMRAM profile global variables,
then their symbols could be removed when SMRAM profile is disabled.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
At worst case, OCR register may always not set BIT31. It will cause
original code enter to dead loop. Adding a break for such case.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The reason is that we observe that a platform may use same Handler
for different context.
In order to support Unregister such handler, we have to input
context information as well.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The reason is that we observe that a platform may use same Handler
for different context.
In order to support Unregister such handler, we have to input
context information as well.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The commit refines the comment description for EFI_PRINT2S_PROTOCOL
service ASCII_VALUE_TO_STRING_S.
This service will not ASSERT when the input/output parameter 'Buffer' is
not aligned on a 16-bit boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ruiyu Ni
Fu Siyuan
Hao Wu
Paulo Alcantara
Michael Kinney
Star Zeng
Dandan Bi
Jiewen Yao
Tian, Feng
Zhang, Lubo
Jiaxin Wu
Liming Gao
Suman Prakash
Jeff Fan
Song, BinX
Ard Biesheuvel
Laszlo Ersek