This change adds support for the ARM Mali DP500/DP500/DP650 display
processors using the GOP protocol. It has been tested on FVP base
models + DP550 support. This change adds platform independant LcdHwLib
library. A corresponding platform specific library will be submitted
to edk-platforms/Platform/ARM/VExpressPkg.
This change does not modify functionality provided by PL111 or
HDLCD. This LcdHwLib implementation should be suitable for those
platforms that implement ARM Mali DP500/DP550/DP650 replacing
PL111/HDLCD.
Only graphics layer of the ARM Mali DP is configured for rendering
the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
Other layers e.g. video layers are not configured.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently framebuffer memory is either reserved in special VRAM or
dynamically allocated using boot services memory allocation functions.
When allocated using boot services calls the memory has to be allocated
as EfiBootServicesData. Unfortunately failures have been seen with this
case. There is also an unfortunate lack of control on the placement of
the framebuffer.
This change introduces two PCDs, PcdArmLcdFrameBufferBase and
PcdArmLcdFrameBufferSize which enable build time reservation of the
framebuffer, avoiding the need to allocate dynamically. This allows
the framebuffer to appear as "I/O memory" outside of the normal RAM
map, which is similar to the "VRAM" case.
This change has no impact on current code, only enables the option
of build time reservation of framebuffers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add definitions for new display modes such as HD 720.
This has no effect on existing display drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds a new PCD PcdArmHdlcdSwapBlueRedSelect
to swap values for HDLCD RED_SELECT and BLUE_SELECT registers
on platforms where blue and red hardware lines are swapped.
If set to TRUE in the platform dsc, HDLCD library will swap the values
while setting RED_SELECT and BLUE_SELECT registers. The default
value of the PCD is FALSE.
NOTE: The motive for this is that a discrepancy in the Red/Blue lines
exists between some VersatileExpress platforms. Rather than have
divergent code, this build switch allows a simple, pragmatic solution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current HDLCD and PL111 platform libraries do not support display modes
with PixelBlueGreenRedReserved8BitPerColor format, i.e. because of
historical confusion, they do not support the UEFI default
PixelBlueGreenRedReserved8BitPerColor format
In LcdPlatformLib for PL111, LcdPlatformQueryMode returns the pixel
format as PixelRedGreenBlueReserved8BitPerColor which is wrong, because
that does not match the display controller's pixel format which is set
to BGR in PL111Lcd LcdHwLib.
Also it is not possible to configure pixel format as RGB/BGR for the
display modes for a platform at build time.
This change adds PcdGopPixelFormat to configure pixel format as
PixelRedGreenBlueReserved8BitPerColor or
PixelBlueGreenRedReserved8BitPerColor or
PixelBitMask.
With this change, pixel format can be selected in the platform specific
.dsc file for all supported display modes.
Support for PixelBitMask is not implemented in PL111 or HDLCD LcdHwLib
libraries, hence HDLCD and PL111 platform libraries will return error
EFI_UNSUPPORTED if PcdGopPixelFormat is set to PixelBitMask. Indeed,
it is not clear what selecting PixelBitMask might mean, but the option
is allowed as it might suit a custom platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The LcdPlatformGetTimings interface function takes similar sets of
multiple parameters for horizontal and vertical timings which can be
aggregated in a common data type. This change defines a structure
SCAN_TIMINGS for this which can be used to describe both horizontal and
vertical scan timings, and accordingly redefines the
LcdPlatformGetTiming interface, greatly reducing the amount of data
passed about.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
LcdIdentify function does not currently check presence of HDLCD
controller.
Implement this functionality by reading HDLCD_REG_VERSION and checking
against the PRODUCT_ID field to detect presence of HDLCD controller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currenty bit LcdPwr of the LCDControl register is enabled immediately
after setting other bits of the LCDControl register. This two write
sequence is unnecessary. This change removes this extra write by setting
LcdPwr bit along with other bits of the LcdControl register.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
some comments are modified and a few new comments are added.
This is to prevent mixing formatting changes with functional
changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
As preparation for further work, the formatting is corrected to meet
the EDKII coding standard.
Of specific note, some invalid include guards were fixed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdPlatformNullLib.c to DOS
style line endings from UNIX style line endings to meet the EDK2
coding standard.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdHwNullLib.c to DOS
style line endings from UNIX style line endings to meet the
EDK2 coding standard. Note it also fixes an end of line
whitespace.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clean up the leading comment and the prototype of
EfiBootManagerAddLoadOptionVariable():
- the function may modify Option on output, annotate the parameter with
OUT and update the documentation;
- "@retval EFI_STATUS" and "@retval Others" are not idiomatic
documentation, use @return instead;
- sync comment and prototype between lib instance and lib class header.
Change-Id: I8a609d6502b6f8929b2f568acaa147065003b6f4
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
PcdRsa2048Sha256PublicKeyBuffer is referenced but not used in the
library, that makes me a little confusing.
Actually, the PublicKeyData should be from the caller of
AuthenticateFmpImage() as input parameter, for example
EdkiiSystemCapsuleLib.
This patch is to remove the PCD reference in this library instance
to be aligned with FmpAuthenticationLibPkcs7 that does not reference
PcdPkcs7CertBuffer.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When we first ported EDK2 to KVM/arm, we implemented a workaround for
the quirky timer handling on the KVM side. This has been fixed in
Linux commit f120cd6533d2 ("KVM: arm/arm64: timer: Allow the timer to
control the active state") dated 23 June 2014, which was incorporated
into Linux release 4.3.
So almost 4 years later, it should be safe to drop this workaround on
the EDK2 side.
This reverts commit b1a633434d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
we have 5 different max val or max byte for PCDs.
refactor and remove 2 methods.
we need 3, as one computes for VOID* PCDs.
Cc: Bob Feng <bob.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
move the single used class from FvImage to Eot
delete the FvImage file
remove FvImage from makefile
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Within function FatQueueTask(), the traverse of FAT subtasks for
executing the disk read/write is not delete-safe.
For the below case:
FatDiskIo(): When non-blocking access, creates subtasks and creates
event (FatOnAccessComplete, NOTIFY level) when subtasks finish.
FatQueueTask(): Traverses the subtasks and submits them one by one at
Tpl lower than NOTIFY.
Disk R/W completes really quick.
FatOnAccessComplete(): Removes the finished subtask, causing the
traverse in FatQueueTask() broken.
This commits will refine the subtask traverse in FatQueueTask() to be
delete-safe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
To align the way in MdeModulePkg SerialPortLib and PciSioSerialDxe driver,
Divisor is added by one when the reminder is more than half (16 * BaudRate).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
__GetInfStatement() does not use the dict parameter, so remove it
from the API and from all callers.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
when comparing a list/string against None and empty, just compare the object.
when comparing against None, dont use !=, ==, <>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
remove not needed lists. some were just counted and others
should be sets.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>