REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2415
Avoid using __clang__ to specify CLANGPDB because this macro is also defined
in CLANG38 and this causes CLANG38 build failure.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2421
Add new definitions for Fmp Capsule dependency in UEFI Spec 2.8.
1. Extend the Last Attempt Status with a value to indicate the firmware
update fails with unsatisfied dependencies.
2. Add the definition of dependency expression op-codes.
3. Add the definition of EFI_FIRMWARE_IMAGE_DEP which is an array of FMP
dependency expression op-codes.
4. Extend the EFI_FIRMWARE_IMAGE_DESCRIPTOR with a pointer to the array of
FMP dependency expression op-codes.
5. Extend the Image Attribute Definitions with IMAGE_ATTRIBUTE_DEPENDENCY
to indicate that there is and EFI_FIRMWARE_IMAGE_DEP section associated
with the image.
6. Update EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION to 4.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
#if MACRO is not good style. It should be changed to
#ifdef MACRO style or #if defined (MACRO) style.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch add FirmwareInterfaceTable.h for the Firmware Interface Table
BIOS specification.
This is to remove future edk2 dependency on edk2-platforms repo. The file
content comes from
edk2-platforms\Silicon\Intel\IntelSiliconPkg\Include\IndustryStandard
BZ link: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Based on Intel Software Develeper's Manual, add all fields in IA32_CR4.
Signed-off-by: Jason Voelz <jason.voelz@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2446
There are many firmwares in the wild not supporting CreateEventEx,
including devices less than 5 years old.
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The latest TCG PFP specification (TCG PC Client Platform Firmware Profile
Specification, Revision 1.05) added new data structure. For example,
the SPDM device measurement. This patch adds the new content.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2393
CLANGPDB does not define __GNUC__, but it does define __clang__. Check
for the __clang__ preprocessor definition to use __builtin_offsetof to
implement the OFFSET_OF macro.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Device Control 2 Structure have an issue.
LtrMechanism - there is 2 bits instead of 1.
Signed-off-by: Daniel Pawel Banaszek <daniel.pawel.banaszek@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
As per the Microsoft Debug Port Table 2 (DBG2) documentation, that
can be found online, we are missing 2 serial interface types for
Arm DCC and Bcm2835 (the latter being used with the Raspberry Pi).
These same types are present in DebugPort2Table.h so add them to
SerialPortConsoleRedirectionTable.h too.
Note that we followed the same idiosyncrasies as DebugPort2Table
for naming these new macros.
Signed-off-by: Pete Batard <pete@akeo.ie>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Keep the comment style of IsLanguageSupported align with
other functions.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
Memory Device (Type 17):
- SMBIOSCR00178: add new memory device type value (HBM) and new form
factor value (Die)
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1871
This is null version of RngLib which should be used with modules that
inherit an (indirect) dependency on the RngLib class, but never actually
call RngLib APIs for consuming randomness.
To be more specific, if following components or functionalities are used
in a platform, the BaseRngLibNull should *not* be used. Instead, a non-Null
version of RngLib must be used (like BaseRngLib for IA32/X64, or future
DxeRngLibRngProtocol for all ARCHs).
- HddPasswordDxe.inf
- AES, TLS (TlsDxe.inf, TlsLib.inf), RSA_OAEP, RSA_PK1
- (If BaseRngLibNull interface ASSERTed at boot time)
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Object Encoding for ExternalOp
in section '20.2.5.2 Named Objects Encoding'.
This patch adds the definition for ExternalOp to
the list of Primary Opcode definitions.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2295
The current implementation of the FileHandleGetFileName() function
assumes that the Root directory always has the FileName '\0'.
However, the only requirement the UEFI specification defines is that
a prepended '\\' must be supported to access files and folders
relative to the Root directory.
This patch removes this assumption and supports constructing valid
paths for any value of FileName for the Root Directory.
In practice, this fixes compatibility issues with File System drivers
that report '\\' as the FileName of the Root directory, which
currently is both generating an invalid path ("\\\\") and resulting
in an EFI_NOT_FOUND result from the CurrentHandle->Open() call.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2293
Move the NULL check in FileHandleGetInfo() to directly after the
allocation to prevent potential NULL dereferences.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2302
The second argument of "UnicodeVSPrintAsciiFormat" is "BufferSize",
which takes the size of the buffer in bytes. Replace the currently
used MAX_DEBUG_MESSAGE_LENGTH usage, which is the buffer's length,
with the actual buffer size.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2302
The second argument of "UnicodeVSPrintAsciiFormat" is "BufferSize",
which takes the size of the buffer in bytes. Replace the currently
used MAX_DEBUG_MESSAGE_LENGTH usage, which is the buffer's length,
with the actual buffer size.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
In the patch, we add the new data type named "EfiTlsVerifyHost" and
the EFI_TLS_VERIFY_HOST_FLAG for the TLS protocol consumer (HTTP)
to enable the host name check so as to avoid the potential
Man-In-The-Middle attack.
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190927034441.3096-2-Jiaxin.wu@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
__inline__ has no functional difference effect with the GCC48 / GCC49 / GCC5
toolchains, but it breaks the build with CLANG9. Remove __inline__.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
CLANG9 tool chain defines __clang__ macro only,
doesn't define __GNUC__ macro. But, it uses some same definitions with GCC.
So, update base definition for CLANG9 tool chain.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2261
Add the UefiFileHandleLib to the [Components] section of the
MdePkg DSC file to support full build testing of the MdePkg.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The HandleProtocol() boot service takes an EFI_HANDLE, not an
(EFI_HANDLE*). Remove the bogus cast in the
InternalImageHandleToFvHandle() function.
This is a semantic cleanup; there is no change in behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
This patch implements the Security Protocol In and Security Protocol Out
commands in UefiScsiLib to prepare support for the Storage Security
Command Protocol.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EBC compiler doesn't support C11 static_assert macro.
So, define STATIC_ASSERT as empty to pass EBC arch build.
STATIC_ASSERT macro is introduced @204ae9da230ecbf0910c21acac7aa5d5e8cbb8d0
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a function that checks if a target language is in the supported
languages list. Add some calls to this function where appropriate in
UefiLib.c
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Zhao <tzhao@solarflare.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2048
New STATIC_ASSERT macro supersedes VERIFY_SIZE_OF as being more functional.
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
S3PciSegmentLib library class header file should be
Include/Library/S3PciSegmentLib.h instead of
Include/Library/PciSegmentLib.h.
https://bugzilla.tianocore.org/show_bug.cgi?id=2146
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2048
Provide a macro for compile time assertions.
Equivalent to C11 static_assert macro from assert.h.
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
To support auto-connection, EFI_BLUETOOTH_LE_SMP_DATA_TYPE needs to
add a new data type EfiBluetoothSmpPeerAddressList which associates
with a list of Bluetooth per address connected before.
This new data type was added in UEFI spec 2.7b.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2138
Added checks for return parameters of GetSupportedTypes
function calls in InternalHstiFindAip to improve error handling.
An issue was observed on Dell Poweredge R740, where the Dell
PERC H740P controller UEFI driver returned InfoTypesBuffer = NULL,
InfoTypesBufferCount = 0 and caused an FreePool assert.
Signed-off-by: Jayanth Raghuram <Jayanth.Raghuram@Dell.com>
Cc: Wei G Liu <Wei_G_Liu@Dell.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The description of parameter Version is missing in comments.
So add the description.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EFI MmAccess and MmControl PPIs are defined in the PI 1.5 specification.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2023
Signed-off-by: Marc W Chen <marc.w.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch moves all files under UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register using following detailed approaches:
1. Move UefiCpuPkg/Include/Register/Amd/ to
MdePkg/Include/Register/Amd folder.
2. Move remaining in UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register/Intel folder.
3. Create wrapper header files under UefiCpuPkg/Include/Register/
to include the accordingly files in MdePkg/Include/Register/Intel.
This is to avoid build break because code in other repos like
edk2-platform includes the file from UefiCpuPkg.
The wrapper header files will be removed after all consumers code
is updated.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
MdeModulePkg/DxeIpl needs to get CPUID output for CPU
5-level paging capability detection.
In order to use the macros/structures defined in
UefiCpuPkg/Include/Register/Cpuid.h, the patch adds Intel/Cpuid.h
to MdePkg/Include/Register/ directory and updates Cpuid.h
in UefiCpuPkg to include the new one in MdePkg.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2046
Make sure all libs that should be dynamically linked
are dynamically linked when XCODE5 compiler is used.
A previous change introduced the following pragma:
#pragma GCC visibility push (hidden)
When the EmulatorPkg is built using XCODE5 toolchain
for X64, this pragma is included and it generates a
linker error when building the Unix Host module. This
change uses !defined(__APPLE__) to prevent the use of
this pragma when building EmulatorPkg/Unix/Host.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This is a special GUID extension Hob to describe SMRAM memory regions
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2020
Signed-off-by: Marc W Chen <marc.w.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2007
The following two PCI Capability Structure registers are updated as per
the PCI Base Specification Revision 4:-
(1) The PCI Device capability register 2(PCI_REG_PCIE_DEVICE_CAPABILITY2)
needs to be upgraded for the PCI features like -
LN system CLS (LnSystemCLS),
10b Tag completer/requester register fields
(TenBitTagCompleterSupported, TenBitTagRequesterSupported),
Emergency power reduction support and initialization requirement
(EmergencyPowerReductionSupported,
EmergencyPowerReductionInitializationRequired),
and FRS support (FrsSupported ).
(2) The PCI Device Control register 2(PCI_REG_PCIE_DEVICE_CONTROL2) needs
to be upgraded for the -
Emergency power reduction request enabling
(EmergencyPowerReductionRequest), and also the 10b Extended Tag
enabling (TenBitTagRequesterEnable).
The following two are defined as per the PCI Express Base Specification
Revision 2.1:-
(1) Defined macro definitions for all the ranges of Maximum Payload Sizes
and Maximum Read Request Sizes register fields
(2) Defined macro definitions for all the ranges of Completion Timeout
value.
Signed-off-by: Ashraf Javeed <ashraf.javeed@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2012
When driver is unloaded, the ExitBootSerivesEvent must be closed at
the same time. Otherwise exception will occur when ExitBootServices.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>