Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg.
RISC-V Virt platform can leverage the same library to access PCI Express
registers through PCI Express base address set in PcdPciExpressBaseAddress
and cached in a global variable.
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Check whenever an EDID blob is present. In case it is get the display
resolution from it. Unless PcdVideoResolutionSource indicates the
display resolution has been set already, update
PcdVideoHorizontalResolution and PcdVideoVerticalResolution accordingly.
Also add the resolution to the mode list.
This will make OVMF boot up with the display resolution configured by
QEMU, which is 1280x800 by default. The resolution can be set using the
xres and yres properties. Here is an example for FullHD:
qemu-system-x86_64 -device VGA,xres=1920,yres=1080
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3778
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1749250
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add helper function to add a video mode to the list of modes.
Move code. Minor debug logging tweaks, no other functional
change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
All video modes in the list are 32-bit,
so drop the useless ColorDepth field.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
struct QEMU_VIDEO_MODE_DATA has all the data needed to set the video
mode, there is no need to take the extra indirection and use
struct QEMU_VIDEO_BOCHS_MODES.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
It's a UINT8 (enum) PCD telling where the PcdVideoHorizontalResolution
and PcdVideoVerticalResolution values are coming from. It can be:
0 (unset aka default from dsc file), or
1 (from PlatformConfig), or
2 (set by Video Driver).
It will be used by video drivers to avoid overriding PlatformConfig
values, or override each others values in case multiple display devices
are present.
The underlying problem this tries to solve is that the GOP protocol has
no way to indicate the preferred video mode. On physical hardware this
isn't much of a problem because using the highest resolution available
works just fine as that is typically the native display resolution
But in a virtual machine you don't want come up with a huge 4k window by
default just because the virtual vga is able to handle that. Cutting
down the video mode list isn't a great solution either as that would
also remove the modes from the platform configuration so the user
wouldn't be able to pick a resolution higher than the default any more.
So with patch drivers can use use PcdVideoHorizontalResolution and
PcdVideoVerticalResolution to indicate what the preferred display
resolution is, without overwriting the user preferences from
PlatformConfig if present.
A possible alternative approach would be to extend the GOP protocol, but
I'm not sure this is a good plan given this is mostly a problem for
virtual machines and using PCDs allows to keep this local to OvmfPkg.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
ovmf default display resolution is 800x600. This is rather small for
modern guests. qemu used 1024x768 as default for a long time and
switched the to 1280x800 recently[1] for the upcoming 7.0 release.
This patch brings ovmf in sync with the recent qemu update and likewise
switches the default to 1280x800.
[1] de72c4b7cd
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Adding the newly created target for Cloud Hypervisor to the CI,
validating it can be properly built.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't need the support for legacy BIOS, therefore the
CSM support can be removed.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate any USB controller or device, therefore
the support can be removed.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
No need for video or virtio-gpu support since Cloud Hypervisor doesn't
emulate any of these.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since Cloud Hypervisor doesn't rely on the FwCfg mechanism, remove the
libraries imports when possible.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Anything specific to the QEMU Q35 platform is not relevant for the
CloudHv target.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor does not emulate any 8259 PIC, therefore there's no
reason to load the corresponding driver for it.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate any LPC bridge, therefore we simply
need to rely on the serial I/O port to be connected as a console.
It reuses the code from Xen since it's very generic.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate the legacy 8254 PIT, which is why
instead of relying on it as the timer UEFI services, rely on the
XenTimerDxe implementation. This is not Xen specific, as it simply uses
the local APIC timer triggering interrupts on the vector 32.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding the new target CloudHvX64, copied directly from OvmfPkgX64. The
point is to create a target dedicated for Cloud Hypervisor rather than
trying to support both QEMU and Cloud Hypervisor on the same target.
Improvements and cleanups will be performed in follow up patches.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Mark the SEV launch secret MEMFD area as reserved, which will allow the
guest OS to use it during the lifetime of the OS, without creating
copies of the sensitive content.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
For GPU passthrough support we have to initialize the console after
EfiBootManagerDispatchDeferredImages() has loaded ROMs, so call it after
this. This was the calling order before the TCG physical presence support
had to be moved and the console initialized earlier so user interaction
could be supported before processing TCG physical presence opcodes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Shivanshu Goyal <shivanshu3@gmail.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Rename TPM_ENABLE to TPM2_ENABLE so naming is in line with the
ArmVirtPkg config option name.
Add separate TPM1_ENABLE option for TPM 1.2 support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Split Tcg2ConfigPei.inf into two variants: Tcg12ConfigPei.inf with
TPM 1.2 support included and Tcg2ConfigPei.inf supporting TPM 2.0 only.
This allows x86 builds to choose whenever TPM 1.2 support should be
included or not by picking the one or the other inf file.
Switch x86 builds to Tcg12ConfigPei.inf, so they continue to
have TPM 1.2 support.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Drop TPM_CONFIG_ENABLE config option. Including TPM support in the
build without also including the TPM configuration menu is not useful.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
With this in place the tpm configuration is not duplicated for each of
our four ovmf config variants (ia32, ia32x64, x64, amdsev) and it is
easier to keep them all in sync when updating the tpm configuration.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Prefer the e820 map provided via qemu firmware config interface
for memory detection. Use rtc cmos only as fallback, which should
be rarely needed these days as qemu supports etc/e820 since 2013.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add a bool parameter to ScanOrAdd64BitE820Ram to explicitly specify
whenever ScanOrAdd64BitE820Ram should add HOBs for high memory (above
4G) or scan only.
Also add a lowmem parameter so ScanOrAdd64BitE820Ram
can report the memory size below 4G.
This allows a more flexible usage of ScanOrAdd64BitE820Ram,
a followup patch will use it for all memory detection.
No functional change.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add virtio-mmio support (VirtioMmioDeviceLib and VirtioFdtDxe).
With this patch added and a new enough qemu version (6.2+) edk2
will detect virtio-mmio devices, so it is possible to boot from
storage (virtio-blk, virtio-scsi) or network (virtio-net).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
FdtClient is unhappy without a device tree, so add an empty fdt
which we can use in case etc/fdt is not present in fw_cfg.
On ARM machines a device tree is mandatory for hardware detection,
that's why FdtClient fails hard.
On microvm the device tree is only used to detect virtio-mmio devices
(this patch series) and the pcie host (future series). So edk2 can
continue with limited functionality in case no device tree is present:
no storage, no network, but serial console and direct kernel boot
works.
qemu release 6.2 & newer will provide a device tree for microvm.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add fdt parser from EmbeddedPkg (FdtLib and FdtClientDxe) to MicrovmX64.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Building grub.efi for AmdSev is difficult because it depends on patches
not yet merged to upstream grub. So shortcut the grub build by simply
creating an empty grub.efi file. That allows to at least build-test the
AmdSev variant.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dov Murik <dovmurik@linux.ibm.com>
Skip the qemu boot test in case QEMU_SKIP is set to true.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Move SettingsManager and PlatformBuilder classes to PlatformBuildLib.py
file, keep only CommonPlatform class in PlatformBuild.py. Allows
reusing these classes for other builds. Pure code motion, no functional
change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes build failure:
build.py...
/home/kraxel/projects/edk2/OvmfPkg/Bhyve/BhyveX64.dsc(...): error 1001: Module type [SEC] is not supported by library instance [/home/kraxel/projects/edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [/home/kraxel/projects/edk2/OvmfPkg/Sec/SecMain.inf]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In FvbInitialize Function,
PcdFlashNvStorageVariableBase64 PcdFlashNvStorageFtwWorkingBase
PcdFlashNvStorageFtwSpareBase will not exceed 0x100000000,
Due to truncation and variable type limitations.
That leads to the NV variable cannot be saved to the memory above 4G.
Modify as follows:
1.Remove the forced type conversion of UINT32.
2.Use UINT64 type variables.
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit 202fb22be6 "OvmfPkg/SecMain: validate the memory used for
decompressing Fv" broke building OvmfXen with:
edk2/OvmfPkg/OvmfXen.dsc(...): error 1001: Module type [SEC] is not
supported by library instancer
[edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [edk2/OvmfPkg/Sec/SecMain.inf]
The above commit added a reference to MemEncryptSevLib into SecMain.inf,
but OvmfXen.dsc doesn't have a MemEncryptSevLib entry for SEC. Add one
like OvmfPkgX64.dsc has.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Adding support for retrieving the Cloud Hypervisor ACPI tables as a
fallback mechanism if tables are not found through fw_cfg.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Don't make the package Qemu centric so that we can introduce some
alternative support for other VMMs not using the fw_cfg mechanism.
This patch is purely about renaming existing files with no functional
change.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a fallback on the SMBIOS code to find the SMBIOS table for Cloud
Hypervisor if it couldn't be found for Qemu through fw_cfg.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the generic entry point part out of Qemu.c to anticipate the
addition of new ways of retrieving the SMBIOS table.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Abner Chang
Gerd Hoffmann
Sebastien Boeuf
Dov Murik
Rebecca Cran
Stefan Berger
Ard Biesheuvel
lixianglai
Jason Andryuk