Currently, PcdCpuMaxLogicalProcessorNumber only supports fixed type. There are
some requests on this PCD to support dynamic type also. For example, platform
may dynamically set this PCD to actual processor count to save memory or improve
boot performance.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This new PCD is used to specify the AP C-state value by MWAIT instruction.
More deeper C-state means more longer latency time when APs exiting from MWAIT
state. Platforms need to balance the performance and power saving to find the
proper C-state for APs.
Also, some processor may not ready for the deepest C-state at the beginning.
Platform also could choose the proper chance to place AP into the deeper C-state
by set this PCD before hand-off to OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19342 6f19259b-4bc3-4df7-8a09-765794883524
This new PCD is used to specify the AP loop mode during POST phase.
The value 1 means we will place AP in the Hlt-Loop state by HLT instruction.
BSP need to send INIT-SIPI-SIPI to wake up APs.
The value 2 means we will place AP in the deepest C-state by MWAIT instruction.
BSP need to modify the monitor buffer by MONITOR instruction to wake up APs.
The value 3 means we will place AP in the Run-loop state. APs are running.
BSP need to write one semaphore to wake up APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19341 6f19259b-4bc3-4df7-8a09-765794883524
Current MtrrLib reserves 2 variable MTRRs for some legacy OS boot (CSM boots)
may require some MTRRs to be reserved for OS use. But UEFI OS boot will not use
MTRRs.
Per Scott's suggestion in
link: http://article.gmane.org/gmane.comp.bios.edk2.devel/4099
Add one PCD PcdCpuNumberOfReservedVariableMtrrs to specify the number of
variable MTRRs reserved for OS use. Setting its default value to 2 is for
back-compatibility.
Cc: Scott Duplichan <scott@notabs.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Suggested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19151 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
Changes between [PATCH v1] and [PATCH v2]:
1) Swap PTE init order for QEMU compatibility.
Current PTE initialization algorithm works on HW but breaks QEMU
emulator. Update the PTE initialization order to be compatible
with both.
2) Update comment block that describes 32KB SMBASE alignment requirement
to match contents of Intel(R) 64 and IA-32 Architectures Software
Developer's Manual
3) Remove BUGBUG comment and call to ClearSmi() that is not required.
SMI should be cleared by root SMI handler.
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
[pbonzini@redhat.com: InitPaging: prepare PT before filling in PDE]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18645 6f19259b-4bc3-4df7-8a09-765794883524
Add declaration of PlatformSecLib library class to DEC file
Add declaration of PcdPeiTemporaryRamStackSize PCD to DEC/UNI file
Add build of PlatformSecLibNull to DSC file
Add build of SecCore to DSC file
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18637 6f19259b-4bc3-4df7-8a09-765794883524
Add PCDs PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize that
are used to detect microcode patch from microcode region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18000 6f19259b-4bc3-4df7-8a09-765794883524
This PCD is used to specify timeout value for BSP to detect all APs for the
first time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17996 6f19259b-4bc3-4df7-8a09-765794883524
introduce PCD value: PcdCpuMaxLogicalProcessorNumber and PcdCpuApStackSize,
used for initialize APs stacks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16350 6f19259b-4bc3-4df7-8a09-765794883524
4. PCD information in DEC file comment blocks are either incomplete or incorrect.
This includes detailed description, @Prompt, @ValidRange, @ValidList, @Expression, and [Error.<TokenSpaceGuid>] validation error messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15935 6f19259b-4bc3-4df7-8a09-765794883524
Its default value is 10 millisecond per IA32 manual.
Platform could customize this PCD value for performance requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Kinney, Michael <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15650 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan
Michael Kinney
Chen Fan
Gao, Liming
Tian, Hot
rsun3
mdkinney
qhuang8
hhtian
jljusten