BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a IOIO_PROT intercept generates a #VC exception. VMGEXIT
must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a IOIO_PROT
NAE event. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXITINFO1 value in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is
added to translate the SCSI Request Packet into the LSI 53C895A
commands. This function utilizes the so-called Script buffer to transmit
a series of commands to the chip and then polls the DMA Status (DSTAT)
register until the Scripts Interrupt Instruction Received (SIR) bit
sets. Once the script is done, the SCSI Request Packet will be modified
to reflect the result of the script. The Cumulative SCSI Byte Count
(CSBC) register is fetched before and after the script to calculate the
transferred bytes and update InTransferLength/OutTransferLength if
necessary.
v3:
- Set DStat, SIst0, and SIst1 to 0 before using them
- Amend the if statements for the DMA data instruction and add the
assertions for the data direction
- Also set SenseDataLength to 0 on the error path
- Fix typos and amend comments
- Amend the error handling of the calculation of transferred bytes
v2:
- Use the BITx macros for the most of LSI_* constants
- Fix a typo: contorller => controller
- Add SeaBIOS lsi-scsi driver as one of the references of the script
- Cast the result of sizeof to UINT32 for the instructions of the
script
- Drop the backslashes
- Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we
already removed DUAL_ADDRESS_CYCLE
- Add more comments for the script
- Fix the check of the script size at the end of the script
- Always set SenseDataLength to 0 to avoid the caller to access
SenseData
- Improve the error handling in LsiScsiProcessRequest()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-11-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.
v2:
- Use the BITx macros for the bit constants
- Add the closing of PciIo protocol in LsiScsiControllerStop()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-8-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement LsiScsiControllerSupported() to probe the PCI ID and look for
LSI 53C895A.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-5-glin@suse.com>
Machines should be able to boot after this commit. Tested with different
Linux distributions (Ubuntu, CentOS) and different Windows
versions (Windows 7, Windows 10, Server 2016).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200504210607.144434-12-nikita.leshchenko@oracle.com>
[lersek@redhat.com: MPT_SCSI_DMA_ADDR_HIGH: drop redundant space char]
Reset and send the IO controller initialization request. The reply is
read back to complete the doorbell function but it isn't useful to us
because it doesn't contain relevant data or status codes.
See "LSI53C1030 PCI-X to Dual Channel Ultra320 SCSI Multifunction
Controller" technical manual for more information.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Message-Id: <20200504210607.144434-11-nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The MptScsiControllerSupported function is called on handles passed in
by the ConnectController() boot service and if the handle is the
lsi53c1030 controller the function would return success. A successful
return value will attach our driver to the device.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200504210607.144434-5-nikita.leshchenko@oracle.com>
On bhyve, the ACPI timer is located at a fixed IO address; it need
not be programmed into, nor fetched from, the PMBA -- power
management base address -- register of the PCI host bridge.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20200430011212.612386-1-rebecca@bsdio.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
These definitions will be used by the following commits to complete the
implementation of PVSCSI device driver.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-12-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
PvScsiControllerSupported() is called on handles passed in
by the ConnectController() boot service and if the handle is the
PVSCSI controller, the function would return success. A success
return value will attach our driver to the device.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-5-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Add a function that collects the APIC IDs of CPUs that have just been
hot-plugged, or are about to be hot-unplugged.
Pending events are only located and never cleared; QEMU's AML needs the
firmware to leave the status bits intact in the hotplug register block.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-10-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
QEMU commit 3a61c8db9d25 ("acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command",
2020-01-22) introduced a new command in the modern CPU hotplug register
block that lets the firmware query the arch-specific IDs (on IA32/X64: the
APIC IDs) of CPUs. Add a macro for this command value, because we'll need
it later.
At the same time, add a sanity check for the modern hotplug interface to
CpuHotplugSmm.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-9-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Add a new SMM driver skeleton that registers a root SMI handler, and
checks if the SMI control value (written to 0xB2) indicates a CPU hotplug
SMI.
QEMU's ACPI payload will cause the OS to raise a broadcast SMI when a CPU
hotplug event occurs, namely by writing value 4 to IO Port 0xB2. In other
words, control value 4 is now allocated for this purpose; introduce the
ICH9_APM_CNT_CPU_HOTPLUG macro for it.
The standard identifiers in this driver use the new MM (Management Mode)
terminology from the PI spec, not the earlier SMM (System Management Mode)
terms.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
In Intel datasheet 316966-002 (the "q35 spec"), Table 5-1 "DRAM Controller
Register Address Map (D0:F0)" leaves the byte register at config space
offset 0x9C unused.
On QEMU's Q35 board, for detecting the "SMRAM at default SMBASE" feature,
firmware is expected to write MCH_DEFAULT_SMBASE_QUERY (0xFF) to offset
MCH_DEFAULT_SMBASE_CTL (0x9C), and read back the register. If the value is
MCH_DEFAULT_SMBASE_IN_RAM (0x01), then the feature is available, and the
range mentioned below is open (accessible to code running outside of SMM).
Then, once firmware writes MCH_DEFAULT_SMBASE_LCK (0x02) to the register,
the MCH_DEFAULT_SMBASE_SIZE (128KB) range at 0x3_0000 (SMM_DEFAULT_SMBASE)
gets closed and locked down, and the register becomes read-only. The area
is reopened, and the register becomes read/write, at platform reset.
Add the above-listed macros to "Q35MchIch9.h".
(There are some other unused offsets in Table 5-1; for example we had
scavenged 0x50 for implementing the extended TSEG feature. 0x9C is the
first byte-wide register standing in isolation after 0x50.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In a subsequent patch, we'll introduce new DRAM controller macros in
"Q35MchIch9.h". Their names are too long for the currently available
vertical whitespace, so increase the latter first.
There is no functional change in this patch ("git show -b" displays
nothing).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In v1.5.0, QEMU's "pc" (i440fx) board gained a "CPU present bitmap"
register block. In v2.0.0, this was extended to the "q35" board.
In v2.7.0, a new (read/write) register interface was laid over the "CPU
present bitmap", with an option for the guest to switch the register block
to the new (a.k.a. modern) interface.
Both interfaces are documented in "docs/specs/acpi_cpu_hotplug.txt" in the
QEMU tree.
Add macros for a minimal subset of the modern interface, just so we can
count the possible CPUs (as opposed to boot CPUs) in a later patch in this
series.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20191022221554.14963-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The informations to make a XENMEM_memory_map hypercall is copied over
from the public header of the Xen Project, with the type name modified
to build on OVMF.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-22-anthony.perard@citrix.com>
Check if there's a start of the day struct provided to PVH guest, save
the ACPI RSDP address for later.
This patch import import arch-x86/hvm/start_info.h from xen.git.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-13-anthony.perard@citrix.com>
The header files under "OvmfPkg/Include/IndustryStandard/Xen" include the
MIT License text. Replace those license blocks with
"SPDX-License-Identifier: MIT" (which refers to
<https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and
humans).
This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This reverts commit 328409ce8d, reapplying
9bcca53fe4.
Note that the commit now being reverted is technically correct; the only
reason we're reverting it is because it should not have been pushed past
the Soft Feature Freeze for the edk2-stable201811 tag.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: yuchenlin <yuchenlin@synology.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1319
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: yuchenlin <yuchenlin@synology.com>
Replace the manual capability list parsing in OvmfPkg/Virtio10Dxe with
PciCapLib and PciCapPciIoLib API calls.
The VIRTIO_PCI_CAP_LINK structure type is now superfluous. (Well, it
always has been; we should have used EFI_PCI_CAPABILITY_HDR.)
Also, EFI_PCI_CAPABILITY_VENDOR_HDR is now included at the front of
VIRTIO_PCI_CAP. No driver other than Virtio10Dxe relies on VIRTIO_PCI_CAP.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add some common macros and type definitions corresponding to the QEMU
TPM interface.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
QEMU has recently gained the ability to provide various hints about its
PCI bridges. The hints take the form of vendor-specific PCI capabilities.
Define macros and types under "OvmfPkg/Include/IndustryStandard" to
describe these capabilities.
The definitions correspond to "docs/pcie_pci_bridge.txt" in the QEMU tree.
Said documentation was added in the last commit of the following series:
a35fe226558a hw/pci: introduce pcie-pci-bridge device
70e1ee59bb94 hw/pci: introduce bridge-only vendor-specific capability to
provide some hints to firmware
226263fb5cda hw/pci: add QEMU-specific PCI capability to the Generic PCI
Express Root Port
c1800a162765 docs: update documentation considering PCIE-PCI bridge
We are going to parse the Resource Reservation Capability in
OvmfPkg/PciHotPlugInitDxe, and return the reservation requests to
PciBusDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
* Introduce the PIIX4_PAM* and MCH_PAM* macros under
"OvmfPkg/Include/IndustryStandard". These macros capture the PAM
register offsets (in PCI config space) on the respective Memory
Controller B/D/F, from the respective data sheets.
* Under IndustryStandard, introduce the PMC_REGISTER_PIIX4() macro for
PIIX4. (For Q35, we already have DRAMC_REGISTER_Q35().) In both cases,
the B/D/F is 0/0/0.
* Under CsmSupportLib, replace the "PAMRegOffset" field (UINT8) in the
PAM_REGISTER_VALUE structure with "PAMRegPciLibAddress" (UINTN). The new
field contains the return value of the PCI_LIB_ADDRESS() macro.
* Under CsmSupportLib, replace the "mRegisterValues440" elements as
follows:
REG_PAMx_OFFSET_440, ReadEnableData, WriteEnableData
-->
PMC_REGISTER_PIIX4 (PIIX4_PAMx), ReadEnableData, WriteEnableData
* Under CsmSupportLib, replace the "mRegisterValuesQ35" elements as
follows:
REG_PAMx_OFFSET_Q35, ReadEnableData, WriteEnableData
-->
DRAMC_REGISTER_Q35 (MCH_PAMx), ReadEnableData, WriteEnableData
* Under CsmSupportLib, update the register address calculations as follows
(for all of PciOr8(), PciAnd8() and PciRead8()):
PCI_LIB_ADDRESS (
PAM_PCI_BUS,
PAM_PCI_DEV,
PAM_PCI_FUNC,
mRegisterValues[Index].PAMRegOffset
)
-->
mRegisterValues[Index].PAMRegPciLibAddress
* Under CsmSupportLib, remove the PAM_PCI_* and REG_PAM*_OFFSET_* macros.
Technically speaking, these changes could be split into three patches
(IndustryStandard macro additions, CsmSupportLib code updates,
CsmSupportLib macro removals). However, the patch is not big, and in this
case it is actually helpful to present the code movement / refactoring in
one step, for easier verification.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1715700
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This feature indicates that the device is behind an IOMMU that translates
bus addresses from the device into physical addresses in memory. If this
feature bit is set to 0, then the device emits physical addresses which
are not translated further, even though an IOMMU may be present.
see [1] for more infromation
[1] https://lists.oasis-open.org/archives/virtio-dev/201610/msg00121.html
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This adds a header file defining symbolic constants for the VMWare SVGA
virtual display device in preparation for supporting it in
QemuVideoDxe.
It is mostly an extract of the file lib/vmware/svga_reg.h from commit
329dd537456f93a806841ec8a8213aed11395def of VMWare's vmware-svga
repository at git://git.code.sf.net/p/vmware-svga/git (See also
http://vmware-svga.sourceforge.net/ )
Only the bare essentials necessary for initialisation, modesetting and
framebuffer access have been kept from the original file; macro names
have been prefixed with VMWARE_SVGA_ instead of SVGA2_, and the enum
definition has been adapted to comply with EDK2 naming conventions.
The original file was released by VMWare under the MIT license, this
has been retained.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_DMA_ADDRESS macro for IO Ports 0x514 and 0x518
(most significant and least significant halves of the DMA Address
Register, respectively), and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_DATA macro for IO Port 0x511 (the Data Register),
and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_SELECTOR macro for IO Port 0x510 (the Selector
Register), and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE_OPCODE expects the PCI address to
access in UEFI encoding, not in edk2/PciLib encoding.
Introduce the POWER_MGMT_REGISTER_Q35_EFI_PCI_ADDRESS() macro, and with
it, store the ICH9_GEN_PMCON_1 register's address to the boot script in
UEFI representation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Correct some typos in the header files of the OvmfPkg
(which have been discovered with the codespell utility).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The header file includes the UTF-8 encoding (0xE2 0x80 0x99) of the U+2019
(RIGHT SINGLE QUOTATION MARK) code point. Replace it with a simple
apostrophe (U+0027, ASCII 0x27).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The GPU additions to VirtIo 1.0 are a work in progress. Mark the relevant
URLs in the source code. Incorporate the absolute minimum from the WIP
spec that is necessary for implementing a GOP driver.
Add the VIRTIO_SUBSYSTEM_GPU_DEVICE macro to
"IndustryStandard/Virtio10.h", since all other such macros (dating back to
VirtIo 0.9.5) are part of "IndustryStandard/Virtio095.h".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We already have the identical purpose (but different value) macro for
ICH9, namely ICH9_PMBASE_MASK in
"OvmfPkg/Include/IndustryStandard/Q35MchIch9.h".
Also, stop bit-negating signed integer constants.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
These header files are intentionally minimal, and intentionally kept apart
from the VirtIo 0.9.5 headers.
The header inclusion chains end up like this (the Virtio10*.h header files
in the middle are new):
Virtio.h -> Virtio10.h -> Virtio095.h
^ ^
| |
VirtioNet.h -> Virtio10Net.h -> Virtio095Net.h
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
In the upcoming virtio-1.0 series, we'll introduce "Virtio10Net.h".
However, the "VirtioNet.h" header file should continue to expose the
Virtio Network Device specific type and macro definitions for all virtio
versions that OvmfPkg supports. Therefore extract "Virtio095Net.h" like
this:
VirtioNet.h -> Virtio095Net.h
so that in the upcoming patches, we can insert "Virtio10Net.h" in the
middle of the inclusion chain.
This follows the example of "Acpi.h" and "Pci.h" under
"MdePkg/Include/IndustryStandard".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the upcoming virtio-1.0 series, we'll introduce "Virtio10.h". However,
the "Virtio.h" header file should continue to expose the generic type and
macro definitions for all virtio versions that OvmfPkg supports. Therefore
extract "Virtio095.h" like this:
Virtio.h -> Virtio095.h
so that in the upcoming patches, we can insert "Virtio10.h" in the middle
of the inclusion chain.
This follows the example of "Acpi.h" and "Pci.h" under
"MdePkg/Include/IndustryStandard".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Section 5.1.16 ("PCIEXBAR -- PCI Express Register Range Base Address") in
Intel document #316966-002 (already referenced near the top of this header
file) describes the Q35 DRAM Controller register that configures the
memory-mapped PCI config space (also known as MMCONFIG, and ECAM /
Enhanced Configuration Access Method).
In this patch we add the macros we'll need later. We'll only support the
256 MB memory-mapped config space -- enough for buses [0, 255].
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
The Clang assembler for AArch64 chokes on the value 0XEA1 since it
expects the 0x prefix to use a lower case x.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18204 6f19259b-4bc3-4df7-8a09-765794883524
This patch initialises root complex register block BAR in order to
support TCO watchdog emulation features (e.g. reboot upon NO_REBOOT bit
not set) on QEMU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17601 6f19259b-4bc3-4df7-8a09-765794883524
Define some new macros for register addresses (both PCI and IO) and
register values (bits) that we're going to use soon.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17433 6f19259b-4bc3-4df7-8a09-765794883524
Tom Lendacky
Gary Lin
Nikita Leshenko
Rebecca Cran
Liran Alon
Laszlo Ersek
Antoine Coeur
Leif Lindholm
Anthony PERARD
Michael D Kinney
yuchenlin
Marc-André Lureau
Brijesh Singh
Phil Dennis-Jordan
Thomas Huth
Ard Biesheuvel
Paulo Alcantara