BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3223
In the current design, memory protection is not available till CpuDxe
is loaded. To resolve this, introduce CpuArchLib to move the
CPU Architectural initialization to DxeCore.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
The PcdPrePiProduceMemoryTypeInformationHob on ARM breaks Linux efistub
boot. The efistub for arm32 uncompresses Linux kernel into memory ranges
which occupied by DXE-phase drivers which leads to
'permission denied'-error during page write. So as a temporary solution
we use PcdPrePiProduceMemoryTypeInformationHob only for AARCH64
Signed-off-by: Savva Mitrofanov <savvamtr@gmail.com>
Add the RngDxe driver to the build, backed by either RNDR or TRNG, one
of which is expected to be available in most cases:
- RNDR is implemented by the 'max' CPU that QEMU implements in TCG mode
- TRNG is implemented by the KVM hypervisor, which backs QEMU's 'host'
CPU
Other TCG modes (e.g., the 'cortex-a*' CPUs) implement neither, which
should prevent the RngDxe driver from dispatching entirely, resulting
in the same situation as before.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Committed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
MdeLibs.inc sets default library class resolutions which are much more
general than the ones that might be specified in ArmVirt.dsc.inc. So the
latter should be included *after* MdeLibs.inc to ensure that its
definitions take precedence.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Committed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
On ARM systems, whether SMC or HVC instructions need to be used to issue
monitor calls is typically dependent on the exception level, but there
are also cases where EL1 might use SMC instructions, so there is no hard
and fast rule.
For ArmVirtQemu, this does depend strictly on the exception level, so
set the default to HVC (for EL1 execution) and override it to SMC when
booted at EL2.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Committed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Currently, only TPM2 builds enable the PCD PEIM, which is a prerequisite
for being able to use dynamic PCDs already at the PEI stage. This
facility will be used for other reasons too so move those pieces out of
code block that are conditional on TPM2_ENABLE
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Committed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This moves the PcdMonitorConduitHvc from PcdsFeatureFlag.Common to
PcdsFixedAtBuild.Common
This is a follow on to the previous commit:
ArmPkg: Allow SMC/HVC monitor conduit to be specified at runtime
ArmVirtQemu may execute at EL2, in which case monitor calls are
generally made using SMC instructions instead of HVC instructions.
Whether or not this is the case can only be decided at runtime, and so
the associated PCD needs to be settable at runtime, if the platform
definition chooses so. This implies a boolean PCD, given that a feature
PCD is build-time configurable only.
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch adds Hash2DxeCrypto to ArmVirtPkg. The Hash2DxeCrypto is
used to provide the hashing protocol services.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch adds "virtio-rng-pci" to the PlatformBuildLib.py
This adds Rng services to the guest VM
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The optimization that enabled entry with MMU and caches enabled at EL1
removed the strict alignment requirement for XIP code (roughly, any code
that might execute with the MMU and caches off, which means SEC and PEI
phase modules but also *all* BASE libraries), on the basis that QEMU can
only run guest payloads at EL2 in TCG emulation, which used to ignore
alignment violations, and execution at EL1 would always occur with the
MMU enabled.
This assumption no longer holds: not only does QEMU now enforce strict
alignment for memory accesses with device semantics, there are also
cases where this code might execute at EL2 under virtualization (i.e.,
under NV2 nested virtualization) where the strict alignment is required
too.
The latter case could be optimized too, by enabling VHE and pretending
execution is occurring at EL1, which would allow the existing logic for
entry with the MMU enabled to be reused. However, this would leave
non-VHE CPUs behind.
So in summary, strict alignment needs to be enforced for any code that
may execute with the MMU off, so drop the override that sets the XIP
flags to the empty string.
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The FACS may still exist when the reduced hardware flag is set in FADT;
it is optional. Since it contains the hardware signature field which
indicates that a hibernated system should boot cleanly instead of
attempting to resume, a platform may choose to expose it. Propagate it
correctly.
Also avoid a NULL pointer dereference if the platform doesn't provide
a DSDT.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <881dd0a2558ecbdfa02c844722d8a1103ab97ab3.camel@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: uncrustify]
Moved the PlatformBootManagerLib to OvmfPkg and renamed to
PlatformBootManagerLibLight for easy use by other ARCH.
Build-tested only (with "ArmVirtQemu.dsc and OvmfPkgX64.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4663
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Lazlo Ersek <lersek@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move the PcdTerminalTypeGuidBuffer and PcdUninstallMemAttrProtocol into
OvmfPkg so other ARCH can easily use it.
Build-tested only (with "ArmVirtQemu.dsc and OvmfPkgX64.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move the FdtSerialPortAddressLib to Ovmfpkg so that other ARCH can
easily use it.
Build-tested only (with "ArmVirtQemu.dsc and OvmfPkgX64.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
to OvmfPkg for easier use by other architectures.
Build-tested only (with "ArmVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add the long lost CI for CloudHv on AArch64.
As CloudHv CI works nearly the same way with other VMMs like KvmTool,
thus we can easily create its CI configuration based on KvmTool.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Shim's PE loader uses the EFI memory attributes protocol in a way that
results in an immediate crash when invoking the loaded image, unless the
base and size of its executable segment are both aligned to 4k.
If this is not the case, it will strip the memory allocation of its
executable permissions, but fail to add them back for the executable
region, resulting in non-executable code. Unfortunately, the PE loader
does not even bother invoking the protocol in this case (as it notices
the misalignment), making it very hard for system firmware to work
around this by attempting to infer the intent of the caller.
So let's introduce a QEMU command line option to indicate that the
protocol should not be exposed at all, and a PCD to set the default for
this option when it is omitted.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/issues/1990
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Update the debug level comments in ArmVirt.dsc.inc to sync with
MdePkg/Include/Library/DebugLib.h.
Signed-off-by: Rebecca Cran <rebecca@os.amperecomputing.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add an instance of ImagePropertiesRecordLib which will be used by the
DXE Core.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Since the code is most regularly tested in CI, distro/versioning
details are updated to match the latest CI configuration.
CI has moved from Ubuntu 18.04 to Ubuntu 22.04 since the time of the
file's creation, but the code is actually built in a Fedora container
so Fedora is mentioned as the primary build/test environment.
Updates the following information:
- Build OS: Fedora 37 Linux
- Supported Configuration: Additional DSCs added
- Python: 3.12.x
- Packaging Tool: dnf instead of apt
- Container Details: Added
- Primary Build Example: QemuBuild.py instead of PlatformBuild.py
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Message-Id: <20231030230902.849-1-mikuback@linux.microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: don't specify the number of supported firmware builds]
Adds the varpolicy EFI shell command to all DSC files that
currently include other dynamic shell commands from ShellPkg.
This command allows variable policies to be dumped in the EFI
shell for convenient auditing and debug.
Use the command in the EFI shell as follows:
- `"varpolicy"` dumps platform variables
- `"varpolicy -?"` shows help text
- `"varpolicy -b"` pages output as expected
- `"varpolicy -s"` shows accurate variable statistic information
- `"varpolicy -p"` shows accurate UEFI variable policy information
- `"varpolicy-v -b"` dumps all information including variable data hex dump
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Julien Grall <julien@xen.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Message-Id: <20231030203112.736-5-mikuback@linux.microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
For the RELEASE target, all ArmVirtPkg DSCs inherit BaseDebugLibNull from
"ArmVirt.dsc.inc"; keep that.
For NOOPT and DEBUG:
- switch the lib class resolution pair (BaseDebugLibSerialPort +
FdtPL011SerialPortLib) that is set as the default for all module types
in "ArmVirt.dsc.inc" to DebugLibFdtPL011UartRam;
- switch the lib class resolution pair (BaseDebugLibSerialPort +
EarlyFdtPL011SerialPortLib) that is set as an override for SEC,
PEI_CORE, PEIM modules in "ArmVirt.dsc.inc" to
DebugLibFdtPL011UartFlash;
- switch the lib class resolution pair (DxeRuntimeDebugLibSerialPort +
FdtPL011SerialPortLib) that is set as an override for DXE_RUNTIME_DRIVER
modules in "ArmVirt.dsc.inc" to DxeRuntimeDebugLibFdtPL011Uart;
- mask all of the above DebugLib class resolution changes in
"ArmVirtKvmTool.dsc", because "ArmVirtKvmTool.dsc" uses
BaseSerialPortLib16550 rather than PL011 UARTs,
- mask all of the above DebugLib class resolution changes in
"ArmVirtXen.dsc" too, because "ArmVirtXen.dsc" uses
XenConsoleSerialPortLib rather than PL011 UARTs.
I regression-tested this change for "ArmVirtKvmTool.dsc" and
"ArmVirtXen.dsc" by building them for both DEBUG and RELEASE, both before
the patch and after, and comparing the edk2 build report files (focusing
on lib class resolutions). There are no changes.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-10-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Introduce three new DebugLib instances, forked from
MdePkg/Library/BaseDebugLibSerialPort. All three instances rely on
PL011UartLib rather than SerialPortLib so that they can customize the
PL011 UART that the debug messages are written to. All three instances
direct the debug output to the first such PL011 UART that *differs* from
the one specified in the Device Tree's /chosen node's "stdout-path"
property.
From these, DxeRuntimeDebugLibFdtPL011Uart is identical to
DebugLibFdtPL011UartRam, with the addition that UART access is permanently
disabled when the containing DXE_RUNTIME_DRIVER module is notified about
exiting boot services.
The contexts in which these DebugLib instances run are identical to those
in which the corresponding SerialPortLib instances run. The particular
original dependency chain is
DxeRuntimeDebugLibSerialPort (DXE_RUNTIME_DRIVER)
FdtPL011SerialPortLib
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
and the new dependency chain is
DxeRuntimeDebugLibFdtPL011Uart (DXE_RUNTIME_DRIVER)
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
The ArmVirtPkg DSC files will be switched to the new library instances in
a separate patch.
This patch is worth viewing with "git show --find-copies-harder".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-9-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Introduce three new DebugLib instances, forked from
MdePkg/Library/BaseDebugLibSerialPort. All three instances rely on
PL011UartLib rather than SerialPortLib so that they can customize the
PL011 UART that the debug messages are written to. All three instances
direct the debug output to the first such PL011 UART that *differs* from
the one specified in the Device Tree's /chosen node's "stdout-path"
property.
From these, DebugLibFdtPL011UartRam mirrors FdtPL011SerialPortLib: it
relies on the EarlyPL011BaseAddress GUID HOB, and initializes the UART --
a UART different from FdtPL011SerialPortLib's -- only once in the lifetime
of the containing module. Suitable for module types that can only execute
from RAM (i.e., all types different from SEC, PEI_CORE, PEIM), except
DXE_RUNTIME_DRIVER.
(Note that OVMF uses a similar set of dedicated DebugLib instances
(PlatformDebugLibIoPort) for logging to the (x86-only) isa-debugcon device
from various firmware phases.)
The contexts in which these DebugLib instances run are identical to those
in which the corresponding SerialPortLib instances run. The particular
original dependency chain is
BaseDebugLibSerialPort (not SEC, PEI_CORE, PEIM, DXE_RUNTIME_DRIVER)
FdtPL011SerialPortLib
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
and the new dependency chain is
DebugLibFdtPL011UartRam (not SEC, PEI_CORE, PEIM, DXE_RUNTIME_DRIVER)
gEarlyPL011BaseAddressGuid
HobLib
PL011UartLib
Note that FdtPL011SerialPortLib remains in use (just not via
BaseDebugLibSerialPort); for instance by MdeModulePkg/Universal/SerialDxe,
which produces the SerialIo protocol, underlying the UEFI console.
The ArmVirtPkg DSC files will be switched to the new library instances in
a separate patch.
This patch is worth viewing with "git show --find-copies-harder".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-8-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Introduce three new DebugLib instances, forked from
MdePkg/Library/BaseDebugLibSerialPort. All three instances rely on
PL011UartLib rather than SerialPortLib so that they can customize the
PL011 UART that the debug messages are written to. All three instances
direct the debug output to the first such PL011 UART that *differs* from
the one specified in the Device Tree's /chosen node's "stdout-path"
property.
From these, DebugLibFdtPL011UartFlash mirrors EarlyFdtPL011SerialPortLib:
it parses the initial Device Tree, and initializes the UART -- a UART
different from EarlyFdtPL011SerialPortLib's -- for every message written.
Suitable for SEC, PEI_CORE, PEIM.
(Note that OVMF uses a similar set of dedicated DebugLib instances
(PlatformDebugLibIoPort) for logging to the (x86-only) isa-debugcon device
from various firmware phases.)
The contexts in which these DebugLib instances run are identical to those
in which the corresponding SerialPortLib instances run. The particular
original dependency chain is
BaseDebugLibSerialPort (SEC, PEI_CORE, PEIM)
EarlyFdtPL011SerialPortLib
PcdDeviceTreeInitialBaseAddress
FdtSerialPortAddressLib
PL011UartLib
and the new dependency chain is
DebugLibFdtPL011UartFlash (SEC, PEI_CORE, PEIM)
PcdDeviceTreeInitialBaseAddress
FdtSerialPortAddressLib
PL011UartLib
Note that EarlyFdtPL011SerialPortLib remains in use (just not via
BaseDebugLibSerialPort), namely for direct SerialPortLib calls from SEC,
PEI_CORE, PEIM. See for example commit 56035d1c8b
("ArmPlatformPkg/PrePeiCore: Print the firmware version early in boot",
2022-10-25).
The ArmVirtPkg DSC files will be switched to the new library instances in
a separate patch.
This patch is worth viewing with "git show --find-copies-harder".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-7-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
PlatformPeiLib produces the EarlyPL011BaseAddress GUID HOB, and
FdtPL011SerialPortLib consumes it. Extend the HOB such that it also carry
the base address of the PL011 UART meant for DebugLib usage -- namely the
first UART that is *not* designated by the /chosen node's "stdout-path"
property. Implement this policy in PlatformPeiLib.
Note that as far as the SerialPortLib+console UART is concerned, this
patch makes no difference. That selection remains consistent with the
pre-patch state, and therefore consistent with EarlyFdtPL011SerialPortLib.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-6-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Convert both EarlyFdtPL011SerialPortLib and PlatformPeiLib at the same
time to clients of FdtSerialPortAddressLib (so that both "early" and
"late" serial output continue going to a common serial port). If the
device tree specifies just one serial port, this conversion makes no
difference, but if there are multiple ports, the output is written to the
port identified by /chosen "stdout-path".
In this patch, DebugLib output is not separated yet from the UEFI console.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-5-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
I strongly dislike when *small* local variable declaration changes are
muddled by whitespace changes. When that happens, a reviewer can choose
from two suboptimal options: display the patch with "git show -b", which
creates confusion in *other* parts of the patch, or display the patch with
just "git show", which then produces an unjustifiedly large hunk for the
sequence of declarations.
For avoiding that in subsequent patches, adjust some whitespace in this
patch in isolation. Functionally this is a no-op; "git show -b" produces
empty output.
Note that uncrustify is (of course) unhappy with this patch, but that's
fine -- this patch is in the middle of a series, and by the end of the
series (which is where uncrustify is run in CI) the whitespace is going to
be tight.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Mikhail Krichanov
Savva Mitrofanov
Ard Biesheuvel
Flickdm
Chao Li
Laszlo Ersek
David Woodhouse
Jianyong Wu
Rebecca Cran
Taylor Beebe
Michael Kubacki