Init CustomCumulativeData.MinDur to PERF_MAXDUR, otherwise the
MinDur displayed for custom cumulative data will be always 0,
but not the real shortest duration.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When double free pages by FreePages() or allocate allocated pages by
AllocatePages() with AllocateAddress type, the code will print debug
message "ConvertPages: Incompatible memory types", but the debug
message is not very obvious for the error paths by FreePages() or
AllocatePages().
Refer https://lists.01.org/pipermail/edk2-devel/2017-August/013075.html
for the discussion.
This patch is to enhance the debug message for the error paths by
FreePages() or AllocatePages.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=667
reported there is double free pages on LoadImage failure path.
CoreLoadPeImage()
...
return EFI_SUCCESS;
Done:
//
// Free memory.
//
if (DstBufAlocated) {
CoreFreePages (Image->ImageContext.ImageAddress, Image->NumberOfPages);
}
...
CoreUnloadAndCloseImage()
...
if ((Image->ImageBasePage != 0) && FreePage) {
CoreFreePages (Image->ImageBasePage, Image->NumberOfPages);
}
...
This patch is to follow the suggestion at
https://lists.01.org/pipermail/edk2-devel/2017-August/013112.html
to set Image->ImageContext.ImageAddress and Image->ImageBasePage to 0
after the free in CoreLoadPeImage().
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
it is a bug in mtoc setting the size of the debug directory entry to
the size of the .debug section, not the size of the
EFI_IMAGE_DEBUG_DIRECTORY_ENTRY. It was causing a loop to iterate and
get bogus EFI_IMAGE_DEBUG_DIRECTORY_ENTRY data and pass that to
memset() and boom.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to update UEFI Boot manager to support DNS device path
for HTTP(S) network boot.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
V3:
* Fix the bug in DevPathFromTextDns()
V2:
* Add no IP instance case check.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch adds the DNS device path node definition.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
V3 changes:
Add debug messages for new return path when successfully erase the
specified blocks. Refine logic for calculating the size for writing
zeros to device.
V2 changes:
The Trim command is not supported on all eMMC devices. For those devices
that do not support such command, add codes to handle the scenario.
Commit message:
The current implementation of the Erase Block Protocol service
EraseBlocks() uses the erase command. According to spec eMMC Electrical
Standard 5.1, Section 6.6.9:
The erasable unit of the eMMC is the "Erase Group"; Erase group is
measured in write blocks that are the basic writable units of the Device.
...
When the Erase is executed it will apply to all write blocks within an
erase group.
However, code logic in function EmmcEraseBlocks() does not check whether
the blocks to be erased form complete erase groups. Missing such checks
will lead to erasing extra data on the device.
This commit will:
a. If the device support the Trim command, use the Trim command to
perform the erase operations for eMMC devices.
According to the spec:
Unlike the Erase command, the Trim function applies the erase operation to
write blocks instead of erase groups.
b. If the device does not support the Trim command, use the Erase command
to erase the data in the erase groups. And write zeros to those blocks
that cannot form a complete erase group.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
v2:
* Refine the patch by changing the '==' to '>='.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jin Eric <eric.jin@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Per DEC spec, multiple section tag use <TS> to separate, and it can
support Tab, so this patch fix the bug to use Tab.
<TabSpace> ::= {<Tab>} {<Space>}
<TS> ::= <TabSpace>*
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yanyan Zhang <yanyanx.zhang@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
when the UI string is read from files, we don't need to add the extra
quotes. Otherwise, it will cause UI name has this extra quotes.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bin Wang <binx.a.wang@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add a new feature to UPT to support installing
multiple DIST packages in one time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=670
Add sample makefile that can be used to test RunMakefile.py
script and can also be used as a template to start a new
PREBUILD/POSTBUILD makefile.
This makefile contains TAB characters instead of spaces on
purpose to maximize compatibility with make utilities.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=670
Add the python script RunMakefile.py that can be used
in a PREBUILD/POSTBUIILD action to invoke a makefile
passing in context as makefile defines. The command
line arguments passed into RunMakefile.py are converted
to the following set of defines.
* ACTIVE_PLATFORM
* TARGET_ARCH
* TOOL_CHAIN_TAG
* CONF_DIRECTORY
* TARGET
* EXTRA_FLAGS
In addition, a makefile can access the system environment
variables including WORKSPACE and PACKAGES_PATH.
The makefile target from the following set is also passed
into the makefile. If no target is passed into build, then
the 'all' target is used.
[all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]
A platform DSC file can use a statements in the [Defines]
section of the following form to use this script. MAKEFILE
is a WORKSPACE or PACKAGES_PATH relative path to the makefile
to run.
[Defines]
PREBUILD = python BaseTools/Script/RunMakefile.py --makefile MAKEFILE
POSTBUILD = python BaseTools/Script/RunMakefile.py --makefile MAKEFILE
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=670
* Extend PREBUILD/POSTBUILD define values to support more than
one argument.
* Delay normalization of PREBUILD/POSTBUILD define values
until all arguments in the define values can be processed.
* Convert PREBUILD/POSTBUILD build define value arguments
that are WORKSPACE or PACKAGES_PATH relative paths to
absolute paths.
* Append -p PlatformFile, --conf=ConfDirectory, and build target
flags to command line used to execute PREBUILD/POSTBUILD
actions.
* Remove PrebuildScript and PostbuildScript fields from the
Build class and use Prebuild and Postbuild fields instead.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Update the comments of Ip4Config2/Ip6Config Protocol to consistent
with UEFI Spec 2.7, which provides the capability to clear specific
individual data types.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
There are VS2015 NOOPT IA32 build failure like below in IntelVTdDxe.
XXX.lib(XXX.obj) : error LNK2001: unresolved external symbol __allshl
XXX.lib(XXX.obj) : error LNK2001: unresolved external symbol __aullshr
This patch is to update Vtd.h to use UINT32 instead of UINT64 for
bitfields in structure definition, and also update IntelVTdDxe code
accordingly.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=635
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The following commit moved the QuarkSocBinPkg from the root
directory of the edk2-non-osi repository to the
Silicon/Intel directory.
182e85d045
The following updates are made to Readme.md:
* PACKAGES_PATH setting for edk2-non-osi directory changes
* Remove use of edk2-FatPkg repository
* Remove use of edk2-BaseTools-win32 repository
* Run python build tools from sources
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Map the use of memset() and memcpy() to the BaseMemoryLib
functions ZeroMem(), SetMem(), and CopyMem(). This fixes
GCC build issues with this module.
With the remap of the functions, the [BuildOptions] MSFT
CC_FLAGS to enable /Oi can also be removed, so the MSFT
and GCC builds behave the same.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
edksetup.sh implements a test that requires the current working
directory to contain the edksetup.sh script. This test has the side
effect of requiring the WORKSPACE to be set to the same directory as
the edksetup.sh. In a multiple workspace configuration, it is
required to be able to have a WORKSPACE that is different from the
directory that contains edksetup.sh. This changeset skips this test
if PACKAGE_PATH is set.
Change-Id: Ie6f16a08c012baf4e650c48cc8e91cdc466d05f2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The patch shows "X"/"-" instead of "Y"/"N" in column "CFG"
and "DIAG".
The patch shows "-" instead of "0" in column "#D" and "#C".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Per NVM Express Spec, software should notify NVME HW when shutdown
occurs.
The NVME controller requires notification for shutdown as part of
its management of internal structures. Even with FUA, failing to
notify the NVME controller to shutdown power off causes the NVME
controller to take quite some time to organize its tables on the
next power on. This time exceeds the normal timeout, so we would
fail to boot the NVME disk.
The host should set the Shutdown Notification (CC.SHN) field to 01b
to indicate a normal shutdown operation. The controller indicates
when shutdown processing is completed by updating the Shutdown Status
(CSTS.SHST) field to 10b.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
In commit 8057622527 ("OvmfPkg/AcpiPlatformDxe: save fw_cfg boot script
with QemuFwCfgS3Lib", 2017-02-23), we replaced the explicit S3 boot script
manipulation in TransferS3ContextToBootScript() with a call to
QemuFwCfgS3CallWhenBootScriptReady(). (Passing AppendFwCfgBootScript() as
callback.)
QemuFwCfgS3CallWhenBootScriptReady() checks for fw_cfg DMA up-front, and
bails with RETURN_NOT_FOUND if fw_cfg DMA is missing.
(This is justified as the goal of QemuFwCfgS3Lib is to "enable[] driver
modules [...] to produce fw_cfg DMA operations that are to be replayed at
S3 resume time".)
In turn, if QemuFwCfgS3CallWhenBootScriptReady() fails, then
OvmfPkg/AcpiPlatformDxe rolls back any earlier linker/loader script
processing, and falls back to the built-in ACPI tables.
(This is also justified because failure to save WRITE_POINTER commands for
replaying at S3 resume implies failure to process the linker/loader script
comprehensively.)
Calling QemuFwCfgS3CallWhenBootScriptReady() from
TransferS3ContextToBootScript() *unconditionally* is wrong however. For
the case when the linker/loader script contains no WRITE_POINTER commands,
the call perpetuated an earlier side effect, and introduced another one:
(1) On machine types that provide fw_cfg DMA (i.e., 2.5+),
QemuFwCfgS3CallWhenBootScriptReady() would succeed, and allocate
workspace for the boot script opcodes in reserved memory. However, no
opcodes would actually be produced in the AppendFwCfgBootScript()
callback, due to lack of any WRITE_POINTER commands.
This waste of reserved memory had been introduced in earlier commit
df73df138d ("OvmfPkg/AcpiPlatformDxe: replay
QEMU_LOADER_WRITE_POINTER commands at S3", 2017-02-09).
(2) On machine types that lack fw_cfg DMA (i.e., 2.4 and earlier),
TransferS3ContextToBootScript() would now fail the linker/loader
script for no reason.
(Note that QEMU itself prevents adding devices that depend on
WRITE_POINTER if the machine type lacks fw_cfg DMA:
$ qemu-system-x86_64 -M pc-q35-2.4 -device vmgenid
qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write
support in fw_cfg, which this machine type does not provide)
Short-circuit an empty S3_CONTEXT in TransferS3ContextToBootScript() by
dropping S3_CONTEXT on the floor. This is compatible with the current
contract of the function as it constitutes a transfer of ownership.
Regression (2) was found and reported by Dhiru Kholia as an OSX guest boot
failure on the "pc-q35-2.4" machine type:
http://mid.mail-archive.com/CANO7a6x6EaWNZ8y=MvLU=w_LjRLXserO3NmsgHvaYE0aUCCWzg@mail.gmail.com
Dhiru bisected the issue to commit 8057622527.
Cc: Dhiru Kholia <dhiru.kholia@gmail.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: df73df138d
Fixes: 8057622527
Reported-by: Dhiru Kholia <dhiru.kholia@gmail.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Dhiru Kholia <dhiru.kholia@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-July/012385.html
reported the timeout processing in SerialRead is not consistent.
Since SerialPortPoll only checks the status of serial port and
returns immediately, and SerialPortRead does not really implement
a time out mechanism and will always wait for enough input,
it will cause below results:
1. If there is no serial input at all, this interface will return
timeout immediately without any waiting;
2. If there is A characters in serial port FIFO, and caller requires
A+1 characters, it will wait until a new input is coming and timeout
will not really occur.
This patch is to update SerialRead() to check SerialPortPoll() and
read data through SerialPortRead() one byte by one byte, and check
timeout against mSerialIoMode.Timeout if no input.
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Split android boot header definition to share code among
different applications and libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In order to not use the deprecated macro, refine
get mtrr mask value logic.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In order to not use the deprecated macro, refine
get mtrr mask value logic.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In order to not use the deprecated macro, refine
get mtrr mask value logic.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In OVMF we currently get the upper (>=4GB) memory size with the
GetSystemMemorySizeAbove4gb() function.
The GetSystemMemorySizeAbove4gb() function is used in two places:
(1) It is the starting point of the calculations in GetFirstNonAddress().
GetFirstNonAddress() in turn
- determines the placement of the 64-bit PCI MMIO aperture,
- provides input for the GCD memory space map's sizing (see
AddressWidthInitialization(), and the CPU HOB in
MiscInitialization()),
- influences the permanent PEI RAM cap (the DXE core's page tables,
built in permanent PEI RAM, grow as the RAM to map grows).
(2) In QemuInitializeRam(), GetSystemMemorySizeAbove4gb() determines the
single memory descriptor HOB that we produce for the upper memory.
Respectively, there are two problems with GetSystemMemorySizeAbove4gb():
(1) It reads a 24-bit count of 64KB RAM chunks from the CMOS, and
therefore cannot return a larger value than one terabyte.
(2) It cannot express discontiguous high RAM.
Starting with version 1.7.0, QEMU has provided the fw_cfg file called
"etc/e820". Refer to the following QEMU commits:
- 0624c7f916b4 ("e820: pass high memory too.", 2013-10-10),
- 7d67110f2d9a ("pc: add etc/e820 fw_cfg file", 2013-10-18)
- 7db16f2480db ("pc: register e820 entries for ram", 2013-10-10)
Ever since these commits in v1.7.0 -- with the last QEMU release being
v2.9.0, and v2.10.0 under development --, the only two RAM entries added
to this E820 map correspond to the below-4GB RAM range, and the above-4GB
RAM range. And, the above-4GB range exactly matches the CMOS registers in
question; see the use of "pcms->above_4g_mem_size":
pc_q35_init() | pc_init1()
pc_memory_init()
e820_add_entry(0x100000000ULL, pcms->above_4g_mem_size, E820_RAM);
pc_cmos_init()
val = pcms->above_4g_mem_size / 65536;
rtc_set_memory(s, 0x5b, val);
rtc_set_memory(s, 0x5c, val >> 8);
rtc_set_memory(s, 0x5d, val >> 16);
Therefore, remedy the above OVMF limitations as follows:
(1) Start off GetFirstNonAddress() by scanning the E820 map for the
highest exclusive >=4GB RAM address. Fall back to the CMOS if the E820
map is unavailable. Base all further calculations (such as 64-bit PCI
MMIO aperture placement, GCD sizing etc) on this value.
At the moment, the only difference this change makes is that we can
have more than 1TB above 4GB -- given that the sole "high RAM" entry
in the E820 map matches the CMOS exactly, modulo the most significant
bits (see above).
However, Igor plans to add discontiguous (cold-plugged) high RAM to
the fw_cfg E820 RAM map later on, and then this scanning will adapt
automatically.
(2) In QemuInitializeRam(), describe the high RAM regions from the E820
map one by one with memory HOBs. Fall back to the CMOS only if the
E820 map is missing.
Again, right now this change only makes a difference if there is at
least 1TB high RAM. Later on it will adapt to discontiguous high RAM
(regardless of its size) automatically.
-*-
Implementation details: introduce the ScanOrAdd64BitE820Ram() function,
which reads the E820 entries from fw_cfg, and finds the highest exclusive
>=4GB RAM address, or produces memory resource descriptor HOBs for RAM
entries that start at or above 4GB. The RAM map is not read in a single
go, because its size can vary, and in PlatformPei we should stay away from
dynamic memory allocation, for the following reasons:
- "Pool" allocations are limited to ~64KB, are served from HOBs, and
cannot be released ever.
- "Page" allocations are seriously limited before PlatformPei installs the
permanent PEI RAM. Furthermore, page allocations can only be released in
DXE, with dedicated code (so the address would have to be passed on with
a HOB or PCD).
- Raw memory allocation HOBs would require the same freeing in DXE.
Therefore we process each E820 entry as soon as it is read from fw_cfg.
-*-
Considering the impact of high RAM on the DXE core:
A few years ago, installing high RAM as *tested* would cause the DXE core
to inhabit such ranges rather than carving out its home from the permanent
PEI RAM. Fortunately, this was fixed in the following edk2 commit:
3a05b13106, "MdeModulePkg DxeCore: Take the range in resource HOB for
PHIT as higher priority", 2015-09-18
which I regression-tested at the time:
http://mid.mail-archive.com/55FC27B0.4070807@redhat.com
Later on, OVMF was changed to install its high RAM as tested (effectively
"arming" the earlier DXE core change for OVMF), in the following edk2
commit:
035ce3b37c, "OvmfPkg/PlatformPei: Add memory above 4GB as tested",
2016-04-21
which I also regression-tested at the time:
http://mid.mail-archive.com/571E8B90.1020102@redhat.com
Therefore adding more "tested memory" HOBs is safe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1468526
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit 09719a01b1 (OvmfPkg/QemuFwCfgLib: Implement SEV internal function
for Dxe phase) uses IOMMU protocol to allocate and free FW_CFG_DMA_ACCESS
buffer when SEV is active. During initial commits we made assumption that
IOMMU.AllocateBuffer() will provide PlainTextAddress (i.e C-bit cleared).
This assumption was wrong, the AllocateBuffer() protocol member is not
expected to produce a buffer that is immediatly usable, and client is
required to call Map() uncondtionally with BusMasterCommonBuffer[64] to
get a mapping which is accessable by both host and device.
The patch refactors code a bit and add the support to Map()
FW_CFG_DMA_ACCESS buffer using BusMasterCommonBuffer operation after
allocation and Unamp() before free.
The complete discussion about this and recommendation from Laszlo can be
found here [1]
[1] https://lists.01.org/pipermail/edk2-devel/2017-July/012652.html
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: convert pointers to UINTN before converting to UINT64]
[lersek@redhat.com: fix argument indentation in multi-line function call]
[lersek@redhat.com: explicitly compare pointers to NULL]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Star Zeng
Andrew Fish
Jiaxin Wu
Hao Wu
Yanyan Zhang
Bin Wang
Hess Chen
Michael D Kinney
Jiewen Yao
Ruiyu Ni
Yonghong Zhu
Chris Ruffin
Huajing Li
Zhang, Chao B
Laszlo Ersek
Jun Nie
Fan, Jeff
Eric Dong
Brijesh Singh