When building the driver for DEBUG/RELEASE, GCC48/GCC49 warn about
ReadFile() possibly using "BytesLeft" without initializing it first.
This is not the case. The reads of "BytesLeft" are only reachable if
(ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ). But, in that case, we
also set "BytesLeft" to "ReadFileInfo->FileDataSize", near the top of the
function.
Assign "BytesLeft" zero at the top, and add a comment that conforms to the
pending Coding Style Spec feature request at
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.
This issue was reported by Ard's and Gerd's CI systems independently.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
The ECMA-167 standard (3rd Edition, June 1997) reserves values 4 through 7
in the ICB.Flags[2:0] bit-field for future standardization; see "14.6 ICB
Tag" / "14.6.8 Flags (RBP 18)".
https://www.ecma-international.org/publications/standards/Ecma-167.htm
The
switch (RecordingFlags)
statement in the ReadFile() function handles all the standard values,
using the constants of the UDF_FE_RECORDING_FLAGS enum type. However, the
reserved values are not caught with a "default" case label, which both
breaks the edk2 Coding Style Spec, and leaves the Status variable
un-initialized, before we return Status under the Done label.
Set Status to EFI_UNSUPPORTED if we encounter a reserved value.
This issue was reported by Ard's and Gerd's CI systems independently
(through build failures with GCC48/GCC49, DEBUG/RELEASE targets).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
To avoid the function name conflict, update the internal function name
to be the specific one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch gets rid of a negative comparison of an UINT64 type (Offset)
as it'll never evaluate to true.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In the expression
(RemainderByMediaBlockSize != 0 ||
Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE)
the second expression is only evaluated if the first expression is false.
If the first expression is false, i.e.,
RemainderByMediaBlockSize == 0
then UDF_LOGICAL_SECTOR_SIZE is a whole multiple of "Media->BlockSize",
which implies
UDF_LOGICAL_SECTOR_SIZE >= Media->BlockSize.
Therefore whenever
Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE
is evaluated, it is false.
The expression
((expression) || FALSE)
is equivalent to
(expression).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In edk2, the division and shifting of 64-bit values are forbidden with
C-language operators, because the compiler may generate intrinsic calls
for them.
For example, clang-3.8 emits a call to "__umoddi3" for
UDF_LOGICAL_SECTOR_SIZE % Media->BlockSize
in PartitionInstallUdfChildHandles(), if PartitionDxe is built for IA32,
which then fails to link.
UDF_LOGICAL_SECTOR_SIZE has type UINT64, while
EFI_BLOCK_IO_MEDIA.BlockSize has type UINT32(). Replace the % operator
with a DivU64x32Remainder() call.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In edk2, initialization of local variables is forbidden, both for
stylistic reasons and because such initialization may generate calls to
compiler intrinsics.
For the following initialization in UdfRead():
CHAR16 FileName[UDF_FILENAME_LENGTH] = { 0 };
clang-3.8 generates a memset() call, when building UdfDxe for IA32, which
then fails to link.
Replace the initialization with ZeroMem().
Do the same to "FilePath" in UdfOpen().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ard reports that clang-3.8 correctly flags the following issue in the
ReadFile() function:
If "RecordingFlags" is INLINE_DATA, then there are three paths through the
code where we mean to return success, but forget to set Status
accordingly:
(1) when "ReadFileInfo->Flags" is READ_FILE_GET_FILESIZE, or
(2) when "ReadFileInfo->Flags" is READ_FILE_ALLOCATE_AND_READ and
AllocatePool() succeeds, or
(3) when "ReadFileInfo->Flags" is READ_FILE_SEEK_AND_READ.
Set "Status" to EFI_SUCCESS when we are done processing the INLINE_DATA
request, i.e., when we reach the corresponding "break" statament under the
INLINE_DATA case label.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the ReadFile() function, if "RecordingFlags" is INLINE_DATA, then we
cover the following values of "ReadFileInfo->Flags":
- READ_FILE_GET_FILESIZE
- READ_FILE_ALLOCATE_AND_READ
- READ_FILE_SEEK_AND_READ
We don't do anything (just proceed to the end of the function) if
"ReadFileInfo->Flags" is anything else.
In reality the above three values cover the domain of the
UDF_READ_FILE_FLAGS enum type fully, and "ReadFileInfo->Flags" is only
ever set internally to UdfDxe. Therefore any other flag value would be a
bug in UdfDxe.
ASSERT() specifically that "ReadFileInfo->Flags" has been set correctly,
so that the reader is not left wondering what happens if none of the enum
constants match.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Initialize the array DescriptorLBAs[] after declaration to fix
non-constant aggregate initializer warning in VS tool chains.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Initialize the array DescriptorLBAs[] after declaration to fix
non-constant aggregate initializer warning in VS tool chains.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V3: Remove one unnecessay type cast in patch 1.
Codes:
if (FilePosition + ExtentLength > ReadFileInfo->FilePosition) {
Offset = ReadFileInfo->FilePosition - FilePosition;
if (Offset < 0) {
Offset = -(Offset)
}
...
}
Offset is UINT64 can not < 0, so the code logic may have some issue.
and Offset = -(Offset) may build failure in some circumstance.
Previously type cast Offset to INT64 to fix build break. Now remove
the type cast. Then can to check the code logic later.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
"UsbSelectConfig: failed to connect driver %r, ignored" is an error
message, but it states at once that the error condition will not affect
the control flow. Degrade the report to DEBUG_WARN.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=653
Correct description of Timeout param in XhciReg.h to be matched with
XhciReg.c.
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch introduces UDF file system support in EDK2. All block devices
that support BlockIo and DiskIo protocols and contain a valid UDF file
system - as specified by OSTA Universal Disk Format (revisions 1.02
through 2.60) - will be installed EFI_SIMPLE_FILE_SYSTEM_PROTOCOL to
provide access to underlying file system.
File system operations on regular, directory and symlink files are
supported.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Scan for UDF file systems on all block devices, as specified by OSTA
Universal Disk Format Specification 2.60, and install a Vendor-Defined
Media Device Path for each file system found.
The Vendor-Defined Media Device Path for the UDF file system is then
checked by UdfDxe to decide whether or not start the driver.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The AtaAtapiPassThru driver maps three system memory regions for Bus
Master Common Buffer operation on the following call path, if the
controller has PCI_CLASS_MASS_STORAGE_SATADPA class code:
AtaAtapiPassThruStart()
EnumerateAttachedDevice()
AhciModeInitialization()
AhciCreateTransferDescriptor()
The device is disabled (including Bus Master DMA) when the controller is
unbound, in AtaAtapiPassThruStop(). Then the regions are unmapped.
The former step should also be done when we exit the boot services, and
the OS gains ownership of system memory.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In AtaAtapiPassThruStop(), if the device has been operating in AHCI mode,
we unmap the DMA buffers and then disable the device (including bus master
DMA). The order of these actions is wrong; we shouldn't unmap DMA buffers
until bus master DMA is turned off. Reverse the steps.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Both AtaAtapiPassThruStart() and AtaAtapiPassThruStop() fetch the
supported attributes of the device, just so they can toggle the
IO+MMIO+BusMaster subset.
After we compute this bitmask in AtaAtapiPassThruStart(), we can cache it
for later, and save the fetch in AtaAtapiPassThruStop().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The IP driver uses EfiCreateProtocolNotifyEvent() to register notify callback
function for IpSec protocol, but it didn't notice that the callback will always
be executed at least once, even the protocol wasn't in handle database.
As a result, the Ip4IpSecProcessPacket() will still always call LocateProtocol()
even the IpSec protocol is not installed, which will impact the network
performance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=620
Adds the support for SD/eMMC device path to show as a boot option.
The CID register content (returned from DiskInfo->Inquiry) seems do not
provide very useful/readable 'OEM/Application ID' and 'Product name'
field.
For SD devices, the OID is a 2-character ASCII string and the Product name
is a 5-character ASCII string.
For eMMC devices, the OID is an 8-bit binary number and the Product name
is a 6-character ASCII string.
These strings are relatively short and do not provide a very readable
description. Hence, this commit uses general 'SD (eMMC) Device' for the
boot option description.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Support pre memory page allocation.
Support FreePages.
Allocation made prior to permanent memory will be
migrated to permanent memory and the HOB updated.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <Ruiyu.Ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=681
For string opcode,when checking the valid string length,
it should exclude the Null-terminated character.
And for string in NameValue storage, need to exclude
the varname and also need to convert the Config string
length to Unicode string length.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
We found there are loops of *2* Maps and only *1* Unmap and
the DMA buffer address is decreasing.
It is caused by the below code flow.
XhcAsyncInterruptTransfer ->
XhcCreateUrb ->
XhcCreateTransferTrb ->
Map Urb->DataMap (1)
Timer: loops of *2* Maps and only *1* Unmap
XhcMonitorAsyncRequests ->
XhcFlushAsyncIntMap ->
Unmap and Map Urb->DataMap (2)
XhcUpdateAsyncRequest ->
XhcCreateTransferTrb ->
Map Urb->DataMap (3)
This patch is to eliminate (3).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add one sample case about how to use HiiPopup protocol to draw message box.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the implementation of HiiPopup protocol in DisplayEngineDxe,
since DisplayEngineDxe is responsible for drawing tasks.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The SPC-4 says about INQUIRY,
> In response to an INQUIRY command received by an incorrect logical unit,
> the SCSI target device shall return the INQUIRY data with the peripheral
> qualifier set to the value defined in 6.4.2. The INQUIRY command shall
> return CHECK CONDITION status only when the device server is unable to
> return the requested INQUIRY data.
When a device server takes the second branch, and returns CHECK CONDITION
for a nonexistent LUN, the InquiryData structure in the
DiscoverScsiDevice() function remains filled with the original zeros.
DiscoverScsiDevice() then sees zero in both Peripheral_Qualifier and
Peripheral_Type, and therefore ScsiBusDxe produces a ScsiIo protocol
instance with device type zero, for the nonexistent LUN.
Device type zero is EFI_SCSI_TYPE_DISK. Thus ScsiDiskDxe binds the bogus
ScsiIo protocol interface, and produces a similarly bogus BlockIo
interface on top. This ripples up to BDS, where UefiBootManagerLib can
auto-generate bogus UEFI boot options for the nonexistent LUNs.
This has been encountered with QEMU, after commit ded6ddc5a7b9 ("scsi:
clarify sense codes for LUN0 emulation", 2017-08-04). QEMU now answers
INQUIRY commands that were directed to nonexistent LUNs with:
> DiscoverScsiDevice:1361: Lun=2 HostAdapterStatus=0 TargetStatus=2
> SenseDataLength=18 InquiryDataLength=96
> Sense {
> Sense 000000 70 00 05 00 00 00 00 0A 00 00 00 00 25 00 00 00
> Sense 000010 00 00
> Sense }
> Inquiry {
> Inquiry 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry }
The interesting fields are:
- HostAdapterStatus=0 (OK),
- TargetStatus=2 (CHECK CONDITION),
- Sense/Error_Code=0x70 (Current error, Fixed description)
- Sense/Sense_Key=0x05 (ILLEGAL REQUEST)
According to SPC-4 "Table 41 -- Sense key descriptions (part 2 of 2)",
ILLEGAL REQUEST is justified when "the command was addressed to an
incorrect logical unit number".
Thus, recognize this kind of answer for nonexistent LUNs.
(
Checking the status fields and the sense data is justified anyway,
according to the documentation of ScsiInquiryCommand():
> @retval EFI_SUCCESS The command was executed
> successfully. See
> HostAdapterStatus,
> TargetStatus, SenseDataLength,
> and SenseData in that order for
> additional status information.
)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The code after the "if" statement is only reachable if the first branch
with the "break" is not taken. Therefore we can move the "else" branch
after the "if" statement, simplifying the code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The SPC-4 spec says about the INQUIRY data, in "Table 138 -- Peripheral
qualifier":
> Qualifier = 011b The device server is not capable of supporting a
> peripheral device on this logical unit. For this
> peripheral qualifier the peripheral device type shall
> be set to 1Fh. All other peripheral device type values
> are reserved for this peripheral qualifier.
Accordingly, the DiscoverScsiDevice() function returns FALSE if
Peripheral_Qualifier is 3 decimal, but Peripheral_Type differs from 1Fh.
This is a valid sanity check -- such combinations are reserved.
When Peripheral_Qualifier is 3, and Peripheral_Type is 1Fh, then
DiscoverScsiDevice() returns TRUE. While this combination is not reserved,
returning TRUE for it is incorrect: Peripheral_Type 1Fh stands for
"Unknown or no device type", and this combination is returned in
particular when the INQUIRY command was directed to a nonexistent LUN.
Quoting the spec:
> In response to an INQUIRY command received by an incorrect logical unit,
> the SCSI target device shall return the INQUIRY data with the peripheral
> qualifier set to the value defined in 6.4.2. [...]
>
> [...]
>
> The PERIPHERAL QUALIFIER field and PERIPHERAL DEVICE TYPE field identify
> the peripheral device connected to the logical unit. If the SCSI target
> device is not capable of supporting a peripheral device connected to
> this logical unit, the device server shall set these fields to 7Fh
> (i.e., PERIPHERAL QUALIFIER field set to 011b and PERIPHERAL DEVICE TYPE
> field set to 1Fh).
The consequence of this bug is that for each nonexistent Target/LUN pair,
we produce a useless ScsiIo protocol interface. The internal
"ScsiIoDevice->ScsiDeviceType" field will be set to 0x1f, and it will be
returned to higher-level SCSI drivers when they call
ScsiIo->GetDeviceType().
Given that 0x1f means "Unknown or no device type", no higher-level driver
can ever support it, so these ScsiIo protocol interfaces are useless.
The fix is to return FALSE for the (Peripheral_Qualifier=3,
Peripheral_Type=0x1f) combination. With that however we reject the whole
Peripheral_Qualifier=3 space (justifiedly -- see the definition above),
which lets us simplify the code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
- Delete useless case code to fix /WHOLEARCHIVE build
error with VS2015 tool chain
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
- Delete never touched code
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When double free pages by FreePages() or allocate allocated pages by
AllocatePages() with AllocateAddress type, the code will print debug
message "ConvertPages: Incompatible memory types", but the debug
message is not very obvious for the error paths by FreePages() or
AllocatePages().
Refer https://lists.01.org/pipermail/edk2-devel/2017-August/013075.html
for the discussion.
This patch is to enhance the debug message for the error paths by
FreePages() or AllocatePages.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=667
reported there is double free pages on LoadImage failure path.
CoreLoadPeImage()
...
return EFI_SUCCESS;
Done:
//
// Free memory.
//
if (DstBufAlocated) {
CoreFreePages (Image->ImageContext.ImageAddress, Image->NumberOfPages);
}
...
CoreUnloadAndCloseImage()
...
if ((Image->ImageBasePage != 0) && FreePage) {
CoreFreePages (Image->ImageBasePage, Image->NumberOfPages);
}
...
This patch is to follow the suggestion at
https://lists.01.org/pipermail/edk2-devel/2017-August/013112.html
to set Image->ImageContext.ImageAddress and Image->ImageBasePage to 0
after the free in CoreLoadPeImage().
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to update UEFI Boot manager to support DNS device path
for HTTP(S) network boot.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
V3 changes:
Add debug messages for new return path when successfully erase the
specified blocks. Refine logic for calculating the size for writing
zeros to device.
V2 changes:
The Trim command is not supported on all eMMC devices. For those devices
that do not support such command, add codes to handle the scenario.
Commit message:
The current implementation of the Erase Block Protocol service
EraseBlocks() uses the erase command. According to spec eMMC Electrical
Standard 5.1, Section 6.6.9:
The erasable unit of the eMMC is the "Erase Group"; Erase group is
measured in write blocks that are the basic writable units of the Device.
...
When the Erase is executed it will apply to all write blocks within an
erase group.
However, code logic in function EmmcEraseBlocks() does not check whether
the blocks to be erased form complete erase groups. Missing such checks
will lead to erasing extra data on the device.
This commit will:
a. If the device support the Trim command, use the Trim command to
perform the erase operations for eMMC devices.
According to the spec:
Unlike the Erase command, the Trim function applies the erase operation to
write blocks instead of erase groups.
b. If the device does not support the Trim command, use the Erase command
to erase the data in the erase groups. And write zeros to those blocks
that cannot form a complete erase group.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Per NVM Express Spec, software should notify NVME HW when shutdown
occurs.
The NVME controller requires notification for shutdown as part of
its management of internal structures. Even with FUA, failing to
notify the NVME controller to shutdown power off causes the NVME
controller to take quite some time to organize its tables on the
next power on. This time exceeds the normal timeout, so we would
fail to boot the NVME disk.
The host should set the Shutdown Notification (CC.SHN) field to 01b
to indicate a normal shutdown operation. The controller indicates
when shutdown processing is completed by updating the Shutdown Status
(CSTS.SHST) field to 10b.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-July/012385.html
reported the timeout processing in SerialRead is not consistent.
Since SerialPortPoll only checks the status of serial port and
returns immediately, and SerialPortRead does not really implement
a time out mechanism and will always wait for enough input,
it will cause below results:
1. If there is no serial input at all, this interface will return
timeout immediately without any waiting;
2. If there is A characters in serial port FIFO, and caller requires
A+1 characters, it will wait until a new input is coming and timeout
will not really occur.
This patch is to update SerialRead() to check SerialPortPoll() and
read data through SerialPortRead() one byte by one byte, and check
timeout against mSerialIoMode.Timeout if no input.
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In a form, some new menus may be dynamically inserted between highlight
menu and previous top of screen menu when some question are refreshed.
So the highlight menu and previous top of screen menu perhaps can't be
shown in one page. Existing codes miss to handle this case then will
cause incorrect display.This patch is to fix this display issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If the EFI_SEC_HOB_DATA_PPI is in the list of PPIs passed to the PEI
entry point, the PEI Foundation will call the GetHobs() member
function and install all HOBs returned into the HOB list. It does
this after installing all PPIs passed from SEC into the PPI database
and before dispatching any PEIMs.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=642
Add top level License.txt file with the BSD 2-Clause
License that is used by the majority of the EKD II open
source project content. Merge copyright statements
from the BSD 2-Clause License files in each package
directory and remove the duplication License.txt
file from package directories.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=629
Move Contributions.txt that contains the TianoCore
Contribution Agreement 1.0 to the root of the edk2
repository and remove the duplicate Contributions.txt
files from all packages.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to the Universal Flash Storage (UFS) Version 2.1 (JESD220C) spec
Section 10.7.8.5, the DATA SEGMENT LENGTH field of the UPIU shall also be
set to number of descriptor bytes to write.
The origin codes miss the above operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current SEC performance data getting code in FirmwarePerformancePei
may get wrong SEC performance data if FirmwarePerformancePei executes
after memory discovered.
And as SecCore has added SecPerformancePpiCallBack to get SEC performance
data and build HOB to convey the SEC performance data to DXE phase.
This patch is to remove the SEC performance data getting code in
FirmwarePerformancePei.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
InstallPpi() will be used for normal PPI in PPI list from SEC,
and NotifyPpi() will be used for notification PPI in PPI list from SEC.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When PiSmmCore links against PeiDxeDebugLibReportStatusCode, the code
flow below will cause a FreePool() assertion issue.
PiSmmCoreMemoryAllocationLibConstructor() ->
SmmInitializeMemoryServices() ->
DEBUG ((DEBUG_INFO, "SmmAddMemoryRegion\n")) in SmmAddMemoryRegion() ->
DebugPrint() -> REPORT_STATUS_CODE_EX() -> ReportStatusCodeEx() ->
AllocatePool()/FreePool(PiSmmCoreMemoryAllocLib) ->
ASSERT() at Head = CR (Buffer, POOL_HEAD, Data, POOL_HEAD_SIGNATURE)
in CoreFreePoolI() of DxeCore Pool.c
It is because at the point of FreePool() in the code flow above,
mSmmCoreMemoryAllocLibSmramRanges/mSmmCoreMemoryAllocLibSmramRangeCount
are not been initialized yet, the FreePool() will be directed to
gBS->FreePool(), that is wrong.
This patch is to temporarily use BootServicesData to hold the
SmramRanges data before calling SmmInitializeMemoryServices().
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PciScanBus() assumes the GetResourcePadding() puts BUS descriptor
in the very beginning, if it's not, the Descriptors will be updated
to point to middle of the pool buffer, which can cause
FreePool(Descriptors) hang in DEBUG image.
No functionality impact to RELEASE image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Refine the comments.
In UI page, some configuration change may require system reset.
BootMaintenanceManagerUiLib misses this check before exiting UiApp
to boot other boot options. Now add the check.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: Refine the comments.
In UI page, some configuration change may require system reset.
BootManagerUiLib misses this check before exiting UiApp to boot
other boot options. Now add the check.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After calling SendForm to enter front page, configuration change in some
driver may require system reset. Currently the reset status is saved in
SendForm level. Then SendForm can return the reset status.
IsResetRequired API also can return the reset status before exiting browser.
It return the reset status in current SendForm level now. But SendForm can
be recursive called by some module.so the reset status in previous SendForm
may be lost. Now change the IsResetRequired API to return the reset info no
matter the reset is caught in any SendForm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=644
According to XHCI spec:
4.10.2.1 Stall Error
4.10.2.4 Babble Detected Error
When a device transmits more data on the USB than the host controller
is expecting for a transaction, it is defined to be babbling.
In general, this is called a Babble Error. When a device sends more
data than the TD Transfer Size bytes (TD Babble), unexpected activity
that persists beyond a specified point in a (micro)frame (Frame Babble),
or a packet greater than Max Packet Size (Packet Babble), the host
controller shall set the Babble Detected Error in the Completion Code
field of the TRB, generate an Error Event, and halt the endpoint
(refer to Section 4.10.2.1).
This patch is to also check for EFI_USB_ERR_BABBLE error returned as
a TransferResult and then proceed to XhcRecoverhaltedEndPoint.
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=593
Currently, SmmCommunciate fails in RestoreLockBox after
SmmReadyToLock since COMM buffer is in stack instead of
using SmmCommRegion by gEdkiiPiSmmCommunicationRegionTableGuid.
This patch is to get SmmCommRegion by
gEdkiiPiSmmCommunicationRegionTableGuid for COMM buffer
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The patch fixes two kinds of bugs in DxeCore that accesses memory
which might be freed or owned by other modules.
The two bugs don't cause functionality issue.
1. CoreValidateHandle() checks whether the handle is valid by
validating its signature. The proper way is to check whether
the handle is in the handle database.
2. CoreDisconnectControllersUsingProtocolInterface() and
CoreOpenProtocol() de-reference Link pointer which is
already freed. The proper way is to not de-reference the pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Adds the implementation of Disk Information Protocol for EMMC devices per
PI 1.6 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Adds the implementation of Disk Information Protocol for SD devices per
PI 1.6 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=433
When a blocking NVMe PassThru request experiences timeout, the current
codes in function NvmExpressPassThru() do not abort the timeout request
while advancing synchronous Submission Queue tail. Therefore, it is
possible to submit a new blocking PassThru request when the synchronous
Submission Queue is full.
The commit adds logic to abort the timeout request by resetting the NVMe
controller when a timeout occurs for a blocking PassThru request.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This fixes BULK data loss when transfer is detected as timeout but
finished just before stopping endpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
The patch separates the common logic in XhcControlTransfer,
XhcBulkTransfer and XhcSyncIntTransfer to a sub-routine
XhcTransfer. It doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Current implementation of IsTransferRingTrb only checks whether
the TRB is in the RING of the URB.
The patch enhanced the logic to check that whether the TRB belongs
to the transaction of URB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=614
Print (L"CapsuleApp: capsule data starts at 0x%X with
size 0x%X\n", (UINTN) CapsuleBuffer, FileSize);
It should use (UINTN) CapsuleBuffer[Index] and FileSize[Index]
as parameter.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Cloud Wang <winggundum82@163.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update the comments of ResetSystem() that was missed by
37078045d7 and 28426918f0.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The SATA spec mandates that link detection by the PHY completes within
10 ms after receiving a reset signal. However, there is no obligation
to uphold this requirement at the driver end as strictly as we do, and
as it turns out, some combinations of host and device (e.g., Samsung
850 EVO connected to a LeMaker Cello) are only borderline compliant,
which means the device is not detected reliably.
So let's allow for a bit of margin, and increase the PHY detect timeout
value to 15 ms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update code to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Report Status Code to indicate BDS starts attempting booting
from the UEFI BootOrder list.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
There is a case that ExtractGuidedSectionGetInfo return 0 for
ScratchBufferSize and ScratchBuffer will be NULL, after AllocatePool
fails to allocate buffer for AllocatedOutputBuffer, the code will
call FreePool (ScratchBuffer), but ScratchBuffer == NULL.
This patch is to only free ScratchBuffer when it is not NULL.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Change since v3:
1) Fixed issue when Attributes = EFI_OPEN_PROTOCOL_TEST_PROTOCOL
and Inteface = NULL case. [Reported by:star.zeng at intel.com]
Change Since v2:
1) Modified to use EFI_ERROR to get status code
Change since v1:
1) Fixed typo protocal to protocol
2) Fixed coding style
Modified source code to update Interface as per spec.
1) In case of Protocol is un-supported, interface should be returned NULL.
2) In case of any error, interface should not be modified.
3) In case of Test Protocol, interface is optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Amit Kumar <amit.ak@samsung.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current code is using debug message like below for
InstallProtocolInterface.
InstallProtocolInterface: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX XXX
User could not know whether the installation is failed or not by the
debug message, for example, the code below does not initialize Handle
before calling InstallProtocolInterface, EFI_INVALID_PARAMETER will be
returned.
EFI_HANDLE Handle;
Status = gBS->InstallProtocolInterface (
&Handle,
&XXX,
EFI_NATIVE_INTERFACE,
XXX
);
This patch is to add additional debug message if the installation
is failed and specific debug message for the case that the input
handle is invalid.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Return EFI_INVALID_PARAMETER in LocateProtocol for Protocol==NULL to
follow UEFI 2.7 spec
PiSmmCore is also updated as the EFI_SMM_SYSTEM_TABLE2.SmmLocateProtocol
is reusing the definition of EFI_LOCATE_PROTOCOL.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=601
When installing configuration table and the original
gDxeCoreST->ConfigurationTable[] buffer happen to be not big enough to
add a new table, the CoreInstallConfigurationTable() enter the branch
of line 113 in InstallConfigurationTable.c to free the old
gDxeCoreST->ConfigurationTable[] buffer and allocate a new bigger one.
The problem happens at line 139 CoreFreePool(), which is to free the
old gDxeCoreST->ConfigurationTable[] buffer. The CoreFreePool()'s
behavior is to free the buffer firstly, then call the
InstallMemoryAttributesTableOnMemoryAllocation (PoolType) to update
the EfiRuntimeServices type memory info, the
CoreInstallConfigurationTable() will be re-entered by CoreFreePool()
in its calling stack, then use-after-free read error will happen at
line 59 of InstallConfigurationTable.c and use-after-free write error
will happen at line 151 and 152 of InstallConfigurationTable.c.
The patch is to update System table to the new table pointer before
calling CoreFreePool() to free the old table.
The case above is in DxeCore, but not in PiSmmCore.
The change in PiSmmCore is to be consistent with DxeCore.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=592
In function UpdateConsoleContent, we compare console name
with "ErrOut" string to check whether the content in console
Error device page has been changed. But when call function
UpdateConsoleContent, we pass console name as "ConErr" by mistake.
This patch is to fix the inconsistent issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Related to the ECR for support of HTTP Redirect (308)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This path is to refine the PXE boot displayed information so as to
in line with NetworkPkg/UefiPxeBcDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Currently implementation doesn't accept the input during the user
is trying to select the PXE BootMenu from option 43. This path is
to fix that problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Some USB devices don't report data periodically through Int
Transfer. They report data only when be asked. If the TRB
is not removed from the XHCI HW, when next time HOST asks
data again, the data is reported but consumed by the previous
TRB, which results the HOST thinks data never comes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When "reconnect -r" is typed in shell, UsbFreeInterface() is called
to uninstall the UsbIo and DevicePath. But When a UsbIo is opened
by a driver and that driver rejects to close the UsbIo in Stop(),
the uninstall doesn't succeed.
But UsbFreeInterface () frees the DevicePath memory without check
whether the uninstall succeeds.
It leads to the DXE core database contain a DevicePath instance but
that instance's memory is freed.
Assertion happens when someone calls InstallProtocol(DevicePath)
because the InstallProtocol() checks all DevicePath instance to
find whether the same one exits in database.
We haven't seen any USB device driver which rejects to close UsbIo
in Stop(), but it's very likely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=510
The commit fills the 'Interval' field of the Endpoint Context data for
isochronous endpoints. It will resolve the error when a Configure
Endpoint Command is sent to an isochronous endpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Laszlo Ersek
Bi, Dandan
Liming Gao
Paulo Alcantara
Star Zeng
Fu Siyuan
Hao Wu
Jiaxin Wu
Song, BinX
Zhang, Chao B
Ruiyu Ni
Michael D Kinney
Eric Dong
Bi, Dandan
Ard Biesheuvel
Amit Kumar
Shi, Steven
hegdenag