... where it belongs, since AARCH64 already keeps it there, and
non DXE users of ArmMmuLib (such as DxeIpl, for the non-executable
stack) may need its functionality as well.
While at it, rename SetMemoryAttributes to ArmSetMemoryAttributes,
and make any functions that are not exported STATIC. Also, replace
an explicit gBS->AllocatePages() call [which is DXE specific] with
MemoryAllocationLib::AllocatePages().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable the use of strict memory permissions on ARM by processing the
EFI_MEMORY_RO and EFI_MEMORY_XP rather than ignoring them. As before,
calls to CpuArchProtocol::SetMemoryAttributes that only set RO/XP
bits will preserve the cacheability attributes. Permissions attributes
are not preserved when setting the memory type only: the way the memory
permission attributes are defined does not allows for that, and so this
situation does not deviate from other architectures.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Page and section entries in the page tables are updated using the
helper ArmUpdateTranslationTableEntry(), which cleans the page
table entry to the PoC, and invalidates the TLB entry covering
the page described by the entry being updated.
Since we may be updating section entries, we might be leaving stale
TLB entries at this point (for all pages in the section except the
first one), which will be invalidated wholesale at the end of
SetMemoryAttributes(). At that point, all caches are cleaned *and*
invalidated as well.
This cache maintenance is costly and unnecessary. The TLB maintenance
is only necessary if we updated any section entries, since any page
by page entries that have been updated will have been invalidated
individually by ArmUpdateTranslationTableEntry().
So drop the clean/invalidate of the caches, and only perform the
full TLB flush if UpdateSectionEntries() was called, or if sections
were split by UpdatePageEntries(). Finally, make the cache maintenance
on the remapped regions themselves conditional on whether any memory
type attributes were modified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, any range passed to CpuArchProtocol::SetMemoryAttributes is
fully broken down into page mappings if the start or the size of the
region happens to be misaliged relative to the section size of 1 MB.
This is going to result in memory being wasted on second level page tables
when we enable strict memory permissions, given that we remap the entire
RAM space non-executable (modulo the code bits) when the CpuArchProtocol
is installed.
So refactor the code to iterate over the range in a way that ensures
that all naturally aligned section sized subregions are not broken up.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, we have not implemented support on 32-bit ARM for managing
permission bits in the page tables. Since the new DXE page protection
for PE/COFF images may invoke EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes()
with only permission attributes set, let's simply ignore those for now.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The single user of EfiAttributeToArmAttribute () is the protocol
method EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes(), which uses the
return value to compare against the ARM attributes of an existing mapping,
to infer whether it is actually necessary to change anything, or whether
the requested update is redundant. This saves some cache and TLB
maintenance on 32-bit ARM systems that use uncached translation tables.
However, EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes() may be invoked with
only permission bits set, in which case the implied requested action is to
update the permissions of the region without modifying the cacheability
attributes. This is currently not possible, because
EfiAttributeToArmAttribute () ASSERT()s [on AArch64] on Attributes arguments
that lack a cacheability bit.
So let's simply return TT_ATTR_INDX_MASK (AArch64) or
TT_DESCRIPTOR_SECTION_TYPE_FAULT (ARM) in these cases (or'ed with the
appropriate permission bits). This way, the return value is equally
suitable for checking whether the attributes need to be modified, but
in a way that accommodates the use without a cacheability bit set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current Arm CpuDxe driver uses EFI_MEMORY_WP for write protection,
according to UEFI spec, we should use EFI_MEMORY_RO for write protection.
The EFI_MEMORY_WP is the cache attribute instead of memory attribute.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
During Mmu initialization in the CpuDxe, for a page table any bits set
in the 'NextSectionAttributes' are garbage and were set from bits that
are actually part of the pagetable address. We clear it out to zero
so that the SyncCacheConfigPage will use the page attributes instead
of trying to convert the (bogus) section attributes into page
attributes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Kurt Kennett <kurt.kennett@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use the new ARM/AArch64 implementation of the base
CpuExceptionHandlerLib library from CpuDxe to centralize
exception handling.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The CLANG assembler does not support the legacy, non-unified assembler syntax,
i.e., it does not support the reordering of the condition suffixes with the
increment/decrement before/after or byte/word suffixes, and it does not
recognize the 'empty descending' (ED) suffix at all. So move to the unified
syntax, and replace 'empty descending' with 'decrement after' or 'increment
before' as appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19280 6f19259b-4bc3-4df7-8a09-765794883524
Since we do not support anything below ARMv7, let's promote the ARMv6
exception handling code in CpuDxe to the only version we provide for
ARM. This means we can drop the unused ARMv4 version.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19273 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Jiewen Yao
Kurt Kennett
Cohen, Eugene