Previous to this change, PvScsiFreeRings() was not undoing all
operations that was done by PvScsiInitRings().
This is because PvScsiInitRings() was both preparing rings (Allocate
memory and map it for device DMA) and setup the rings against device by
issueing a device command. While PvScsiFreeRings() only unmaps the rings
and free their memory.
Driver do not have a functional error as it makes sure to reset device
before every call site to PvScsiFreeRings(). However, this is not
intuitive.
Therefore, prefer to refactor the setup of the ring against device to a
separate function than PvScsiInitRings().
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331225637.123318-1-liran.alon@oracle.com>
[lersek@redhat.com: rename FreeDMACommBuffer label to FreeDmaCommBuffer]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Sean reported that VS2019 build produce the following build error:
INFO - PvScsi.c
INFO - Generating code
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): error C2220: the
following warning is treated as an error
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): warning C4244: '=':
conversion from 'const UINT16' to 'UINT8', possible loss of data
This result from an implicit cast from PVSCSI Response->ScsiStatus
(Which is UINT16) to Packet->TargetResponse (Which is UINT8).
Fix this issue by adding an appropriate explicit cast and verify with
assert that this truncation do not result in loss of data.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2651
Reported-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110452.51992-1-liran.alon@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap VS2019 diags in commit msg for PatchCheck.py]
This causes the device to forget about the request/completion rings.
We allocated said rings in EfiBootServicesData type memory, and code
executing after ExitBootServices() is permitted to overwrite it.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-17-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Implement EXT_SCSI_PASS_THRU.PassThru().
Machines should be able to boot after this commit.
Tested with Ubuntu 16.04 guest.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-16-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In case device is constrained by IOMMU or guest is running under AMD SEV,
input/output buffers provided to device (DataBuffer and SenseData) needs
to be explicitly mapped to device by PciIo->Map().
To avoid the overhead of mapping/unmapping the DataBuffer and SenseData
to the device for every SCSI requst (and to simplify code), introduce a
single DMA communication buffer that will be mapped to device on
initialization. When a SCSI request needs to be sent to device, the
DataBuffer and SenseData will be copied from/to the DMA communication
buffer as required. This will be done by the following commits.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-15-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
These rings are shared memory buffers between host and device in which
a cyclic buffer is managed to send request descriptors from host to
device and receive completion descriptors from device to host.
Note that because device may be constrained by IOMMU or guest may be run
under AMD SEV, we make sure to map these rings to device by using
PciIo->Map().
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-14-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This commit doesn't change semantics.
It is done as a preparation for future commits which will modify
PCI attributes.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-10-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
This will give us an exclusive access to the PciIo of this device
after it was started and until it will be stopped.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-9-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Implement EXT_SCSI_PASS_THRU.GetNextTarget() and
EXT_SCSI_PASS_THRU.GetNextTargetLun().
ScsiBusDxe scans all MaxTarget * MaxLun possible devices.
This can take unnecessarily long for large number of targets.
To deal with this, VirtioScsiDxe has defined PCDs to limit the
MaxTarget & MaxLun to desired values which gives sufficient
performance. It is very important in virtio-scsi as it can have
very big MaxTarget & MaxLun.
Even though a common PVSCSI device has a default MaxTarget=64 and
MaxLun=0, we implement similar mechanism as virtio-scsi for completeness.
This may be useful in the future when PVSCSI will have bigger values
for MaxTarget and MaxLun.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-7-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
PvScsiControllerSupported() is called on handles passed in
by the ConnectController() boot service and if the handle is the
PVSCSI controller, the function would return success. A success
return value will attach our driver to the device.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-5-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Install Component Name protocols to have a nice display name for the
driver in places such as UEFI shell.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-4-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
In order to probe and connect to the PvScsi device we need this
protocol. Currently it does nothing.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-3-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
In preparation for support booting from PvScsi devices, create a
basic scaffolding for a driver.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-2-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Liran Alon