Architectures such as AArch64 may run the OS with 16 KB or 64 KB sized
pages, and for this reason, the UEFI spec mandates a minimal allocation
granularity of 64 KB for regions that may require different memory
attributes at OS runtime.
So make PeiCore's implementation of AllocatePages () take this into
account as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the local definitions for the default and runtime page allocation
granularity macros, and switch to the new MdePkg versions.
Note that this replaces a reference to the 'default' version with the
more correct 'runtime' version, but this matters little in practice.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the local definitions for the default and runtime page allocation
granularity macros, and switch to the new MdePkg versions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when creating page tables.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This implements a DXE memory protection policy that ensures that regions
that don't require executable permissions are mapped with the non-exec
attribute set.
First of all, it iterates over all entries in the UEFI memory map, and
removes executable permissions according to the configured DXE memory
protection policy, as recorded in PcdDxeNxMemoryProtectionPolicy.
Secondly, it sets or clears the non-executable attribute when allocating
or freeing pages, both for page based or pool based allocations.
Note that this complements the image protection facility, which applies
strict permissions to BootServicesCode/RuntimeServicesCode regions when
the section alignment allows it. The memory protection configured by this
patch operates on non-code regions only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In preparation of adding memory permission attribute management to
the pool allocator, split off the locking of the pool metadata into
a separate lock. This is an improvement in itself, given that pool
allocations can only interfere with the page allocation bookkeeping
if pool pages are allocated or released. But it is also required to
ensure that the permission attribute management does not deadlock,
given that it may trigger page table splits leading to additional
page tables being allocated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ensure that any memory allocated for PE/COFF images is identifiable as
a boot services code region, so that we know it requires its executable
permissions to be preserved when we tighten mapping permissions later on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Instead of assuming that a PE/COFF section of type EFI_IMAGE_SCN_CNT_CODE
can always be mapped read-only, classify a section as a code section only
if it has the executable attribute set and the writable attribute cleared.
This adheres more closely to the PE/COFF spec, and avoids issues with
Linux OS loaders that may consist of a single read/write/execute section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
1) SmmCore maintains the root SMI handler and NULL SMI handler
database.
2) SmmCore consumes PcdSmiHandlerProfilePropertyMask to decide
if SmmCore need support SMI handler profile.
If SMI handler profile is supported, the SmmCore installs
SMI handler profile protocol and SMI handler profile
communication handler.
3) SMI handler profile protocol will record the hardware SMI
handler profile registered by SmmChildDispatcher.
4) SMI handler profile communication handler will return all
SMI handler profile info (NULL SMI handler, GUID SMI handler,
and hardware SMI handler)
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If the UEFI image is page aligned, the image code section is set to read
only and the image data section is set to non-executable.
1) This policy is applied for all UEFI image including boot service driver,
runtime driver or application.
2) This policy is applied only if the UEFI image meets the page alignment
requirement.
3) This policy is applied only if the Source UEFI image matches the
PcdImageProtectionPolicy definition.
4) This policy is not applied to the non-PE image region.
The DxeCore calls CpuArchProtocol->SetMemoryAttributes() to protect
the image. If the CpuArch protocol is not installed yet, the DxeCore
enqueues the protection request. Once the CpuArch is installed, the
DxeCore dequeues the protection request and applies policy.
Once the image is unloaded, the protection is removed automatically.
The UEFI runtime image protection is teared down at ExitBootServices(),
the runtime image code relocation need write code segment at
SetVirtualAddressMap(). We cannot assume OS/Loader has taken over
page table at that time.
NOTE: It is per-requisite that code section and data section
should not be not merged. That is same criteria for SMM/runtime driver.
We are not able to detect during BIOS boot, because
we can only get LINK warning below:
"LINK : warning LNK4254: section '.data' (C0000040) merged into
'.text' (60000020) with different attributes"
But final attribute in PE code section is same.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If GUIDED section authentication has EFI_AUTH_STATUS_NOT_TESTED, its
matched extraction ppi may not be installed. So, don't cache its data.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When PEIM is security violation, its matched extraction ppi may not be
installed. So, its PeimNeedingDispatch will still reset to TRUE.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When gDS->SetMemorySpaceCapabilities() is called,
current DXE core will sync all GCD attributes to memory map
attributes, including RUNTIME attributes.
It is wrong, because RUNTIME attributes should be set for
runtime memory only.
This fix clears the RUNTIME attributes before convert to UEFI
memory map. So that the UEFI memory map is good after
gDS->SetMemorySpaceCapabilities() is called.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If a BaseAddress of NULL is passed into DXE Core services
CoreAllocateIoSpace() or CoreAllocateMemorySpace(), and
DEBUG() messages are enabled, then a NULL pointer reference
is made. The parameter check for BaseAddress is performed
in the function CoreAllocateSpace() after the DEBUG()
messages. A check is added in the DEBUG() messages to
prevent the NULL pointer reference.
This issue was found with PI SCTs with DEBUG messages
enabled in the DXE Core.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PiSmmIpl records LoadModuleAtFixAddressSmramBase in LMFAConfigurationTable.
Update PiSmmCore to directly get the address from this system table.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Allocate the additional Smram range to describe the reserved smram for
SMM core and driver when LMFA feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=278
Zero memory address or zero number pages are invalid to SmmFreePages().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
EFI_PAGES_TO_SIZE only handles UINTN, so we use EfiPagesToSize
to handle UINT64.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Current memory attribute table implementation will only mark PE code
to be EfiRuntimeServicesCode, and mark rest to be EfiRuntimeServicesData.
However, there might be a case that a SMM code wants to allocate
EfiRuntimeServicesCode explicitly to let page table protect this region
to be read only. It is unsupported.
This patch enhances the current solution so that MemoryAttributeTable
does not touch non PE image record.
Only the PE image region is forced to be EfiRuntimeServicesCode for
code and EfiRuntimeServicesData for data.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
PiSmmCore supports page level protection based upon the Memory Type
(EfiRuntimeServicesCode/EfiRuntimeServicesData) and PE image.
However, the Memory Type information is ignored in AllocatePool().
If a caller calls AllocatePool with EfiRuntimeServicesCode,
the final memory is still allocated as EfiRuntimeServicesData.
This patch supports AllocatePool with EfiRuntimeServicesCode.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add the comments to describe Free and Allocated SMRAM are added separately.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Make SetPeiServicesTablePointer() earlier than ProcessLibraryConstructorList()
so the constructor() function can get the correct pei service table pointer.
https://bugzilla.tianocore.org/show_bug.cgi?id=238
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
gSmmCorePrivate->CommunicationBuffer and gSmmCorePrivate->BufferSize locate at
runtime memory region. That means they could be modified by non-SMM code during
runtime.
We should cache them into SMM local variables before we verify them. After
verification, we should use the cached ones directly instead of the ones in
gSmmCorePrivate.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
The SMM memory attribute table concept is similar to UEFI
memory attribute table.
The new file MdeModulePkg/Core/PiSmmCore/MemoryAttributesTable.c
and the new code in MdeModulePkg/Core/PiSmmCore/Page.c
are based on the algorithms and implementation from
MdeModulePkg/Core/Dxe/Misc/MemoryAttributesTable.c
and MdeModulePkg/Core/Dxe/Mem/Page.c.
These new components are based on the Memory Attributes Table
feature from the UEFI Specification and the existing DXE Core
implementation that supports that feature.
This SMM MemoryAttributes table is produced at SmmEndOfDxe event.
So that the consumer (PiSmmCpu) may consult this table
to set memory attribute in page table.
This patch also installs LoadedImage protocol to SMM
protocol database, so that the SMM image info can be
got easily to construct the PiSmmMemoryAttributes table.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
PeiServicesAllocatePages () will output sizeof (EFI_PHYSICAL_ADDRESS) value.
IdtTableForX64 is sizeof (UINTN) local variable. It will overwrite other local
variable.
This issue is found when we dump BaseOfStack value.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Dump new stack base and size information could help developer to narrow down
stack crash issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Code logic ensures that the pointer 'DriverInfoData' will not be NULL when
it is used.
Add ASSERT as warning for case that will not happen.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
- abstrated to abstracted
- accessibla to accessible
- addres to address
- apropriate to appropriate
- arry to array
- availabe to available
- avaliable to available
- becasue to because
- correponding to corresponding
- etablished to established
- exeuction to execution
- extensiable to extensible
- fileds to fields
- loadding to loading
- ptototypes to prototypes
- prococol protocol
- requried to required
- resoruce to resource
- runing to running
- uild to build
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Switch all users of ArmLib that depend on the MMU routines to the new,
separate ArmMmuLib. This needs to occur in one go, since the MMU
routines are removed from ArmLib build at the same time, to prevent
conflicting symbols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Code logic ensures that both pointers 'DriverInfoData' and 'AllocInfoData'
will not be NULL when they are used.
Add ASSERTs as warning for cases that will not happen.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Produce SMM memory profile protocol.
2. Consume PcdMemoryProfilePropertyMask to support disable recording
at the start.
3. Consume PcdMemoryProfileDriverPath to control which drivers need
memory profile data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
1. Implement include GetRecordingState/SetRecordingState/Record for
memory profile protocol.
2. Consume PcdMemoryProfilePropertyMask to support disable recording
at the start.
3. Consume PcdMemoryProfileDriverPath to control which drivers need
memory profile data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PI specification Vol 4 - SMM does not have any limitation of BASE_4GB for SMM.
So we should replace BASE_4GB check with MAX_ADDRESS check to make sure
the SMM memory is accessible by SMM Core.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/IdtVectorAsm.asm to Ia32/IdtVectorAsm.nasm
Note: Manually updated code storing @VectorTemplateBase address
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
PeiCore EntryPoint library _ModuleEntryPoint() will call PeiCore(), then call
CpuDeadLoop (). When NORETURN is added for PeiCore(), MSVC compiler will report
warning C4702: unreachable code for CpuDeadLoop (). And, the warning is treated
as error and cause build break. DxeMain() has the similar issue.
edk2 uses EntryPoint library to wrap every module entry point function except
for SEC. The module entry point is still called by _ModuleEntryPoint(). So,
there will be negative impact to add NORETURN for the module entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
This patch adds the NORETURN attribute to functions that transfer to
other phases, along with an UNREACHABLE() call at the end to avoid
false warnings.
DxeIpl has been excluded as its main function returns a status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to PI specification, EndOfDxe Event should be signaled before
DxeSmmReadyToLock protocol installation. This update is ASSERT if EndOfDxe
Event is not signaled when DxeSmmReadyToLock protocol installed. And do
REPORT_STATUS_CODE() also.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
PI1.4a spec added "For S3 resume boot modes DXE IPL must be
prepared to execute without permanent memory installed and
invoke the S3 resume modules."
To follow PI1.4a spec, this patch is to update DxeIpl and
PeiCore to enable S3 resume from temporary memory.
The normal boot path still enforces the permanent memory
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Katie Dellaquila <katie.dellaquila@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FirmwareVolmeInfoPpiNotifyCallback is re-enterable during FV process. Since PrivateData->FVCount increases when processing each sub FVs, need to cache Parent FV count in stack before processing any sub FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
This patches rename CoreGetMemoryMapPropertiesTable to
CoreGetMemoryMapWithSeparatedImageSection.
The reason is that CoreGetMemoryMapPropertiesTable is called
by MemoryAttributesTable.c to get separated PE image section
information.
It is confusing to use *PropertiesTable, because it is NOT
related to PropertiesTable.c
We rename it to avoid confusing.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Set the ImageContext.Handle and ImageContext.ImageRead() fields so that
PeCoffLoaderRelocateImageExtraAction() can invoke PeCoffLoaderGetImageInfo
or PeCoffLoaderGetPeHeader if desired to obtain additional metadata.
We will use this to create a PeCoffLoaderRelocateImageExtraAction()
implementation that applies boot time strict mapping permissions to
PE/COFF modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
Update PiSmmCore to handle SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET
request.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Use 128 bytes as the start size region to be same to previous one.
64 bytes is small as the first range. On X64 arch, POOL_OVERHEAD
takes 40 bytes, the pool data less than 24 bytes can be fit into
it. But, the real allocation is few that can't reduce its free pool
link list. And, the second range (64~128) has more allocation
that also increases the free pool link list of the first range.
Then, the link list will become longer and longer. When LinkList
check enable in DEBUG tip, the long link list will bring the
additional overhead and bad performance. Here is the performance
data collected in our X64 platform with DEBUG enable.
64 byte: 22 seconds in BDS phase
128 byte: 19.6 seconds in BDS phase
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
It can improve profile performance, especially when
PcdMemoryProfileMemoryType configured without EfiBootServicesData.
CoreUpdateProfile() can return quickly, but not depend on the further
code to find the buffer not recorded and then return.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The patch uses CoreAcquireLockOrFail() instead of
CoreAcquireProtocolLock() in CoreLocateProtocol() to avoid
assertion when CoreLocateProtocol() is called with the
protocol database locked.
The issue was found when changing PcdDebugPrintErrorLevel to
enable page/pool allocation debug message.
Nt32 platform hangs immediately after DxeCore is loaded.
Investigation shows the following calling stacks:
DxeCore entry point (Install a certain protocol)
0 DxeCore::CoreInstallProtocolInterface // Protocol DB is locked
1 DxeCore::AllocatePool
2 PeiDxeDebugLibReportStatusCode::DebugPrint
3 DxeReportStatusCodeLib::ReportStatusCodeEx // <-------------------|
4 DxeReportStatusCodeLib::InternalGetReportStatusCode |
5 DxeCore::LocateProtocol(StatusCodeRuntimeProtocol) |
// Assertion when locking Protocol DB 2nd time |
6 DxeCore::CoreAcquireProtocolLock |
7 PeiDxeDebugLibReportStatusCode::DebugAssert |
8 DxeReportStatusCodeLib::ReportSatusCodeEx // loop begins ---------
In frame #6 the assertion is triggered due to the protocol database
is already locked. #8 calls #4 and the loop begins.
After changing #6 to CoreAcquireLockOrFail(), the assertion is
avoided and the loop is broken.
With the fix, NT32 can boot to Shell even setting
PcdDebugPrintErrorLevel to 0xFFFFFFFF, with all error levels turned
on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current MemoryAttributesTable will be installed on ReadyToBoot event
at TPL_NOTIFY level, it maybe incorrect when PcdHiiOsRuntimeSupport
= TRUE as HiiDatabaseDxe will have runtime memory allocation for HII
OS runtime support on and after ReadyToBoot. The issue was exposed at
http://article.gmane.org/gmane.comp.bios.edk2.devel/10125.
To make sure the correctness of MemoryAttributesTable, this patch is
to enhance MemoryAttributesTable installation to install
MemoryAttributesTable on ReadyToBoot event at TPL_CALLBACK - 1 level
to make sure it is at the last of ReadyToBoot event, and also hook
runtime memory allocation after ReadyToBoot.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The following patch for MemoryAttributesTable will need the memory type.
And CoreUpdateProfile() can also use the memory type for check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Originally, the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" was after ProcessLibraryConstructorList(). To fix an issue,
ProcessLibraryConstructorList() was moved to be right after CoreInitializeGcdServices()
at c5d5379937, but the code block was left.
As there maybe PeCoffExtraActionLib implementation need Constructor executed first,
the patch is to move the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" to be after ProcessLibraryConstructorList.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Check for Type AllocateAddress,
if NumberOfPages is 0 or
if (NumberOfPages << EFI_PAGE_SHIFT) is above MAX_ADDRESS or
if (Start + NumberOfBytes) rolls over 0 or
if Start is above MAX_ADDRESS or
if End is above MAX_ADDRESS,
return EFI_NOT_FOUND.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When the DXE core is loaded, it invokes the PeCoffExtraActionLib library
function 'PeCoffLoaderRelocateImageExtraAction' explicitly, which may be
in addition to the same function having been called by the DxeIpl PE/COFF
loader instance.
The ImageContext that DXE core presents to this function is only partially
initialized, which may result in the following output on AArch64 systems:
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226240
<some intermediate output>
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226000
This is caused by incorrect data in the ImageContext structure, which means
the start of the .text section is calculated incorrectly. In general, it is
the duty of the caller to present a valid ImageContext structure, so let's
add the missing values before invoking PeCoffLoaderRelocateImageExtraAction().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When PcdShadowPeimOnBoot is FALSE, they are not copied to memory and
execute from their original locations. Here, this policy should only
apply for PEIM and PEI_CORE, not for other file type, such as DXE_CORE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Eugene Cohen <eugene@hp.com>
If 'CoreGetMemoryMap' return success the 'MemoryMap' shouldn't be NULL.
Add code to make sure this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Yao Jiewen <Jiewen.Yao@intel.com>
According to the spec, each entry in the Memory
Attributes table shall have the same type as
the region it was carved out of in the UEFI memory map.
The current attribute uses RTData for PE Data, but
it should be RTCode.
This patch fixed the issue. It is validated with or
without PropertiesTable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MemoryAttributesTable generation need information in
PropertiesTable.
In memory attributes table generation path,
PropertiesTable need record original memory map and do
not merge the new memory map entry cross original
memory map boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Add MemoryAttributesTable generation in DxeCore.
We leverage the information collected by original
PropertiesTable, and publish runtime code/data to
another standalone table. So that this is a
compatible solution to report more PE Code/Data
information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
At the end of CoreFreePoolI(), the check to see if it is a specific
memory type should also cover OEM reserved memory type.
It was missed when adding OEM reserved memory type support at R17460.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If FV image without DXE depex, it will be dispatched by DxeCore.
If FV image with SMM depex, it is the invalid image. ASSERT will be trig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
(HandoffInformationTable->EfiFreeMemoryBottom - Private->HobList.Raw)
is the PEI temp heap used instead of the length of PEI temp heap.
The length of PEI temp heap should be:
(HandoffInformationTable->EfiFreeMemoryTop - Private->HobList.Raw)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19762 6f19259b-4bc3-4df7-8a09-765794883524
Signal a closed event will still invoke the event notification function,
it could only be exposed when no the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
bit set in PcdDebugPropertyMask.
For example:
gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_CALLBACK,
CallbackFun,
NULL,
&Event
);
gBS->CloseEvent (Event);
gBS->SignalEvent (Event); <- CallbackFun still be invoked
Although the case to signal a closed event is abnormal, the code could
still be enhanced to avoid it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19754 6f19259b-4bc3-4df7-8a09-765794883524
The single line for(); construct is followed by code that is indented.
This triggers the -Wempty-body warning. Fix indentation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19420 6f19259b-4bc3-4df7-8a09-765794883524
In DxeCore, use warning message for Runtime driver that doesn't satisfy
section alignment requirement. This check is required when PropertiesTable
is installed. So, add error message if PropertiesTable can't be installed
successfully.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19312 6f19259b-4bc3-4df7-8a09-765794883524
We had put communication buffer to Runtime memory,
so that SMI handler can know it is not used by OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18949 6f19259b-4bc3-4df7-8a09-765794883524
PiSmmCore installs LoadedImage for each SMM driver. However itself is missing.
So we follow DxeCore style, let PiSmmCore installs LoadedImage protocol for itself,
then the SMM image information is complete.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18945 6f19259b-4bc3-4df7-8a09-765794883524
Original code does not uninstall LoadedImage protocol if SMM driver returns error and is unloaded.
It causes a wrong LoadedImage protocol existing in system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18936 6f19259b-4bc3-4df7-8a09-765794883524
Original code refers FreePoolHdr without check Status. It is obvious wrong and has risk.
Aslo, if InternalAllocPoolByIndex() returns an error, then *FreePoolHdr is assigned to an uninitialized value. So we init Hdr be NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18932 6f19259b-4bc3-4df7-8a09-765794883524
The ASSERT (PrivateData->PeiMemoryInstalled) in if (PrivateData->PeiMemoryInstalled)
condition is useless, it should be ASSERT (FALSE) to follow the code's expectation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18887 6f19259b-4bc3-4df7-8a09-765794883524
A corner case like below will cause a NOT_DISPATCHED FV has no opportunity to
be dispatched.
1. FV_RECOVERY has SecCore, PeiCore and some other PEI modules, a module will
report FVMAIN_COMPACT and FV_RECOVERY2 in sequence.
2. FVMAIN_COMPACT has a FV image file with GUIDED FV image section in it.
3. FV_RECOVERY2 has DxeIpl and other PEI modules, the DxeIpl will install
SectionExtractionPpi
If ALL the PEIMs in FV_RECOVERY and FV_RECOVERY2 have DEPEX satisfied and
executed in one loop, PeimNeedingDispatch will be always FALSE, FVMAIN_COMPACT
will have no opportunity to be decompressed and dispatched as DxeIpl executes
after the first processing to FVMAIN_COMPACT.
The patch is to set PeimNeedingDispatch to TRUE when ProcessFvFile() not successfully,
then the NOT_DISPATCHED FV could have another opportunity to be processed.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18781 6f19259b-4bc3-4df7-8a09-765794883524
This patch fixes an issue in PEI with encapsulated FV images where the
AuthenticationStatus is not correctly propagated down to child FV
handles. The PEI core registers for callbacks for both FvInfo and
FvInfo2 PPIs. These callbacks process the FVs which will recurse as
necessary to find more encapsulated FVs. (FvInfo2 is an updated PPI
that includes an AuthenticationStatus field - the original FvInfo did
not include this.)
When encapsulated FV processing occurs the PEI core installs both
FvInfo and FvInfo2 PPIs. The original implementation installs FvInfo
first and FvInfo2 second. As soon as the FvInfo PPI is installed the
notification callback handler immediately fires causing recursive FV
processing to occur. Since there is no AuthenticationStatus provided
for the original FvInfo the callback assumes AuthenticationStatus is
zero (unsigned / unverified) even though the parent FV may have been
verified.
This changes the order of FvInfo and FvInfo2 installs to ensure that
the notification callback occurs for FvInfo2 first and appropriate
AuthenticationStatus data can be propagated from parent FV to child
FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18764 6f19259b-4bc3-4df7-8a09-765794883524
A subset of fields in the EFI_SMM_SYSTEM_TABLE2 structure are identical
to the fields in the SMM_ENTRY_CONTEXT structure. CopyMem() is used to
transfer the contents of the SMM_ENTRY_CONTEXT structure into the
EFI_SMM_SYSTEM_TABLE2. This is confusing because SMM_ENTRY_CONTEXT is
not used in the declaration of EFI_SMM_SYSTEM_TABLE2 and field contents
are transferred without any reference to individual field names (e.g.
CurrentlyExecutingCpu). In order to make the code easier to maintain
and understand, the CopyMem() is replaced with statements that transfer
each field of SMM_ENTRY_CONTEXT into EFI_SMM_SYSTEM_TABLE2.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Link: http://article.gmane.org/gmane.comp.bios.edk2.devel/3567
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18716 6f19259b-4bc3-4df7-8a09-765794883524
Mark the DXE stack region as non-executable right before handing
off to the DXE core, by invoking the appropriate ArmLib function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <Feng.Tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18588 6f19259b-4bc3-4df7-8a09-765794883524
In a CloseEvent, an UnregisterProtocolNotify is done unconditionally.
There is a penalty associated with searching the protocol database on
every CloseEvent and impacts performance, especially during Network IO.
Unregister needs to be done only if the Event is for a RegisterProtocolNotify.
So extend the ExFlag in IEVENT to a UINT8 and define new flags that can
be set to indicate if the Event is part of a group, or registered on a
protocol notify. Then in CloseEvent, call UnregisterProtocolNotify only
if the register protocol notify flag is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18517 6f19259b-4bc3-4df7-8a09-765794883524
Take the range in the resource descriptor HOB for the memory region described
by the PHIT as higher priority if it is big enough. It can make the memory bin
allocated to be at the same memory region with PHIT that has more better compatibility
to avoid memory fragmentation for some code practices assume and allocate <4G ACPI memory.
Also let the minimal memory size needed include the total memory bin size needed to
make sure memory bin could be allocated successfully.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18503 6f19259b-4bc3-4df7-8a09-765794883524
Bi, Dandan
Ard Biesheuvel
Hao Wu
Fu Siyuan
Leo Duran
Jiewen Yao
Liming Gao
Star Zeng
Michael Kinney
Jeff Fan
Laszlo Ersek
Gary Lin
Marvin Haeuser
Giri P Mudusuru
Jordan Justen
Cohen, Eugene
Zhang, Chao B
Ruiyu Ni
Qiu Shumin
Cinnamon Shia
Andrew Fish
Samer El-Haj-Mahmoud