When TerminalDxe Start() is called multiple times, the old logic
unconditionally appended the terminal device path candidates to
*Dev (ConInDev/ConOutDev/ErrOutDev), resulting the volatile storage
is full.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
An example:
The codes in function Output8bitPixel in Image.c:
OffsetY = BITMAP_LEN_8_BIT ((UINT32) Image->Width, Ypos);
Both Image->Width and Ypos are of type UINT16. They will be promoted to
int (signed) first, and then perform the multiplication defined by macro
BITMAP_LEN_8_BIT. If the result of multiplication between Image->Width and
Ypos exceeds the range of type int, a potential incorrect results
will be assigned to OffsetY.
This commit adds explicit UINT32 type cast for 'Image->Width' to avoid
possible overflow in the int range. And also fix similar issues in
HiiDatabase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
GCC -fno-builtin option is added into tools_def.template at
90defe7198.
So, there is no need to set it in module INF file.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=442
PcdExpression used in INF to control PCD and Source is unsupported feature.
Current sample usage in module INF brings confuse.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The BGRT table has an 8 byte field for the memory address of the image
data, and yet the driver explicitly allocates below 4 GB. This results
in an ASSERT() on systems that do not have any memory below 4 GB to begin
with.
Since neither the PI, the UEFI or the ACPI spec contain any mention of
why this data should reside below 4 GB, replace the allocation call
with an ordinary AllocatePages() call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Invocations of EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() may
result in a crash when the value of PcdAcpiExposedTableVersions does
not include EFI_ACPI_TABLE_VERSION_1_0B.
The reason is that EFI_ACPI_TABLE_PROTOCOL::InstallAcpiTable() will
only populate the Rsdt1/Rsdt3 pointers when EFI_ACPI_TABLE_VERSION_1_0B
is set, whereas EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() will
invoke PublishTables with EFI_ACPI_TABLE_VERSION_1_0B alawys set,
resulting in a NULL pointer dereference of the Rsdt1/Rsdt3 pointers.
So take PcdAcpiExposedTableVersions into account for UninstallAcpiTable
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
RamDiskDxe installs the RamDiskAcpiCheck() Ready To Boot callback
function. If EFI_ACPI_TABLE_PROTOCOL and/or EFI_ACPI_SDT_PROTOCOL are not
found, then informational messages are logged, and the RAM disks are not
published to the (nonexistent) NFIT table.
The logic is fine, but the info messages are not concatenated correctly
from multiple string literals -- the second parts are passed as (unused)
arguments to DEBUG(). Fix the typos.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
198a46d768 improved the DSDT and X_DSDT
fields mutual exclusion by checking FADT revision, but that breaks
some OS that has assumption to only consume X_DSDT field even the
DSDT address is < 4G.
To have better compatibility, this patch is to update the code to not
make FADT.{DSDT,X_DSDT} mutual exclusion, but always set both DSDT and
X_DSDT fields in the FADT when the DSDT address is < 4G.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Jeff Fan <jeff.fan@intel.com>
The original logic assumes GOP hande is son of PCI handle but it
is not always true.
Below wordings are from UEFI Spec:
If a graphics device supports multiple frame buffers, then
handles for the frame buffers must be created first, and then the
handles for the video output devices can be created as children of
the frame buffer handles.
So the GOP handle could be grandson of the PCI handle.
EfiBootManagerGetGopDevicePath(VideoController) is used to fix
this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
v2: Handle error case in SockCreateChild and fix typo issue
when we destroy the socket Sock and its associated
protocol control block, we need to first close the
parent protocol, then remove the protocol from childHandle
and last to free any data structures that allocated in
CreateChild. But currently, we free the socket data
(Socket ConfigureState) before removing the protocol
form the childhandle. So if the up layer want to send the
tcp reset packet in it's driver binding stop function, it will failed.
The IpInstance destroy state is redundant and may cause
ip transmit failed if up layer want to send ip packet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
* Add the check in Ip4Config2SetDefaultIf to avoid the DHCP configuration
case.
Ip4config2 doesn't check the validity of Ip/Netmask pair, which
leads to the invalid combination of Ip and Netmask setting.
This patch is to resolve the issue.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Current PI spec has no clear description about whether the
SkuId could be changed multiple times or not during one boot.
If the SkuId could be changed multiple times during one boot,
different modules may get inconsistent PCD values.
And DynamicHii PCD maps to UEFI variable, once one DynamicHii
PCD(UEFI variable) is set for one SkuId, then the PCD value
will be always from UEFI variable but not PCD database, even
the SkuId is set to other value.
This patch is to update PCD drivers to allow SkuId to be
changed only once during one boot.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ACPI specification, up to and including revision 5.1 Errata A, allows
the DSDT and X_DSDT fields to be both set in the FADT. (Obviously, this
only makes sense if the DSDT address is representable in 4 bytes.)
Starting with 5.1 Errata B, specifically for Mantis 1393
<https://mantis.uefi.org/mantis/view.php?id=1393>, the spec requires at
most one of DSDT and X_DSDT to be set to a nonzero value.
MdeModulePkg/AcpiTableDxe handles this mutual exclusion somewhat
inconsistently.
- If the caller of EFI_ACPI_TABLE_PROTOCOL.InstallAcpiTable() installs the
tables in "DSDT, FADT" order, then we enforce the exclusion between the
DSDT and X_DSDT fields:
DSDT under 4GB FADT.DSDT FADT.X_DSDT [VARIANT B]
-------------- --------- -----------
yes set clear
no clear set
This behavior conforms to 5.1 Errata B. (And it's not required by
earlier versions of the spec.)
- If the caller passes in the tables in "FADT, DSDT" relative order, then
we do not enforce the exclusion:
DSDT under 4GB FADT.DSDT FADT.X_DSDT [VARIANT A]
-------------- --------- -----------
yes set set
no clear set
This satisfies 5.1 Errata A and earlier, but breaks 5.1 Errata B and
later.
Unify the handling of both relative orders. In particular, check the major
and minor version numbers in the FADT. If the FADT version is strictly
before 5.1, then implement [VARIANT A]. If the FADT version is equal to or
larger than 5.1, then implement [VARIANT B].
We make three observations:
- We can't check the FADT table version precisely against "5.1 Errata B";
erratum levels are not captured in the table. We err in the safe
direction, namely we enforce the exclusion for "5.1" and "5.1 Errata A".
- The same applies to "6.0" versus "6.0 Errata A". Because we cannot
distinguish these two, we consider "6.0" to be "equal to or larger than
5.1", and apply [VARIANT B], enforcing the exclusion.
- While a blanket [VARIANT B] would be simpler, there is a significant
benefit to [VARIANT A], under the spec versions that permit it:
compatibility with a wider range of OSPMs (typically, older ones).
For example, Igor reported about a "DELL R430 system with rev4 FADT
where DSDT and X_DSDT are pointing to the same address". Michael also
reported about several systems that exhibit the same.
Regression tested with the following KVM guests (QEMU built at
ata0def594286d, "Merge remote-tracking branch
'remotes/bonzini/tags/for-upstream' into staging", 2017-01-30):
- OVMF: boot and S3 suspend/resume
- Ia32, Q35, SMM
- Fedlet 20141209
- Ia32X64, Q35, SMM
- Fedora 22
- Windows 7
- Windows 8.1
- Windows 10
- Windows Server 2008 R2
- Windows Server 2012 R2
- Windows Server 2016 Tech Preview 4
- X64, I440FX, no SMM
- Fedora 24
- RHEL-6.7
- RHEL-7.2-ish
- ArmVirtQemu: boot test with virtio-gpu
- AARCH64
- Fedora 24
- RHELSA-7.3
- openSUSE Tumbleweed (4.8.4-based)
This change is connected to ASWG ticket
<https://mantis.uefi.org/mantis/view.php?id=1757>, which is now
closed/fixed.
Cc: Al Stone <ahs3@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Tsirkin <mtsirkin@redhat.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch incurs no functional changes, it just removes some whitespace,
and also makes sure we always assign
AcpiTableInstance->Fadt3->Dsdt
first, and
AcpiTableInstance->Fadt3->XDsdt
second. The goal is to separate the syntactic changes from the functional
changes implemented by the next patch.
Cc: Al Stone <ahs3@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Tsirkin <mtsirkin@redhat.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
For pointer subtraction, the result is of type "ptrdiff_t". According to
the C11 standard (Committee Draft - April 12, 2011):
"When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object; the
result is the difference of the subscripts of the two array elements. The
size of the result is implementation-defined, and its type (a signed
integer type) is ptrdiff_t defined in the <stddef.h> header. If the result
is not representable in an object of that type, the behavior is
undefined."
In our codes, there are cases that the pointer subtraction is not
performed by pointers to elements of the same array object. This might
lead to potential issues, since the behavior is undefined according to C11
standard.
Also, since the size of type "ptrdiff_t" is implementation-defined. Some
static code checkers may warn that the pointer subtraction might underflow
first and then being cast to a bigger size. For example:
UINT8 *Ptr1, *Ptr2;
UINTN PtrDiff;
...
PtrDiff = (UINTN) (Ptr1 - Ptr2);
The commit will refine the pointer subtraction expressions by casting each
pointer to UINTN first and then perform the subtraction:
PtrDiff = (UINTN) Ptr1 - (UINTN) Ptr2;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Measure DBT into PCR[7] when it is updated between initial measure
if present and not empty. by following TCG PC Client PFP 00.49
Previous patch for PCR[7] DBT part is overrode.
dc9bd6ed28
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
To handle the deprecation of PrintLib APIs UnicodeValueToString and
AsciiValueToString by subsequent commits, the commit refines the logic for
the implemetation of the UnicodeValueToString and AsciiValueToString
services in EFI_PRINT2_PROTOCOL.
When the macro DISABLE_NEW_DEPRECATED_INTERFACES is defined (indicating
the deprecation of the PrintLib APIs), the above two services will ASSERT
and will return zero to reflect not being supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
It is the follow up of commits 51f0ceb..9e32e97 to replace
AsciiValueToString/UnicodeValueToString with
AsciiValueToStringS/UnicodeValueToStringS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
This module updates the under-4GB page tables configured by the S3-Resume
code in UefiCpuPkg/Universal/Acpi/S3Resume2Pei. The mask is saved at module
start (ScriptExecute.c), and applied when tables are expanded on-demand by
page-faults above 4GB's (SetIdtEntry.c).
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when 4GB tables are created (UefiCapsule.c), and when
the tables are expanded on-demand by page-faults above 4GB's (X64Entry.c).
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The EBC driver emits thunks for native to EBC calls, which are short
instructions sequences that bridge the gap between the native execution
environment and the EBC virtual machine.
Since these thunks are allocated using MemoryAllocationLib::AllocatePool(),
they are emitted into EfiBootServicesData regions, which does not reflect
the nature of these thunks accurately, and interferes with strict memory
protection policies that map data regions non-executable.
So instead, create a new helper EbcAllocatePoolForThunk() that invokes the
AllocatePool() boot service directly to allocate EfiBootServicesCode pool
memory explicitly, and wire up this helper for the various architecture
specific thunk generation routines.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Having duplicated DNS server IPs specified is not an ideal
configuration, but not an error condition. This patch is to
remove the duplicated DNS address check to allow the same DNS
address setting in SetData().
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Update the interface name from ethA ethB to
eth10, eth11 etc if port number more than 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
For string op-code, the default string may not reach the
maximum size, so when generating <AltResp> string, we should
clean the value before setting the default string.
https://bugzilla.tianocore.org/show_bug.cgi?id=375
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When set value to the array "InputText", the index was used incorrectly.
And the array "InputText" is not initialized. These will cause some value
in the array is random, so it will be shown incorrectly sometimes.
This patch is to fix this issue.
https://bugzilla.tianocore.org/show_bug.cgi?id=358
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Wang Cloud <winggundum82@163.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add the EFI_PRINT2S_PROTOCOL as a safe version of the EFI_PRINT2_PROTOCOL,
the EFI_PRINT2S_PROTOCOL replaces the following 2 services in
EFI_PRINT2_PROTOCOL:
UNICODE_VALUE_TO_STRING
ASCII_VALUE_TO_STRING
with:
UNICODE_VALUE_TO_STRING_S
ASCII_VALUE_TO_STRING_S
The 2 new services perform checks to the input parameters and will return
relative status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, When there are more than 9 Ethernet ports available,
'ifconfig -l' is not listing all the ports, only show the ports 0 to 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Use UEFI_VARIABLE_DATA data structure according to TCG PC-Client PFP Spec
00.21.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Measure DBT into PCR[7] when it is updated between initial measure and
ExitBootService. Measure "SecureBoot" change after PK update.
Spec version : TCG PC Client PFP 00.37. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitly return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Pass '&Node.Header' instead of '&Node' as the 1st parameter to function
SetDevicePathNodeLength().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
TerminalDxe driver contains bugs in its DriverBindingStart():
1. It cannot be started AGAIN using a different terminal type;
2. It doesn't install SimpleTextInput/SimpleTextOut when
ConIn/ConOut doesn't contain its device path. The check is
duplicated of the same logic in ConPlatform driver and can
be removed.
The patch optimized the code to remove the unnecessary
gEfiCallerIdGuid protocol installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Ip4Config2SetDnsServer may cause ASSERT if the invalid DNS
server address received. The issue is triggered by the NULL
pointer(Tmp) free.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The BootScriptWriteMemPoll() helper function in both drivers does the
following:
- pop Delay from the variable argument list as UINT64, then truncate it to
UINTN,
- divide Delay by 10, using DivU64x32Remainder(), then store the quotient
in LoopTimes (also UINTN),
- pass LoopTimes to S3BootScriptSaveMemPoll() as last argument.
The truncation to UINTN is superfluous and wrong in this logic (not to
mention incompatible with the PI spec); it prevents callers from
specifying Delays longer than 0xFFFF_FFFF * 100ns (approximately 429
seconds == 7 minutes 9 seconds) on Ia32. In particular it prevents callers
from specifying an infinite timeout (for example, 0xFFFF_FFFF_FFFF_FFFF *
100ns, approximately 58494 years).
Change the type of Delay and LoopTimes to UINT64. Keep the same logic,
just remove the truncations. The resultant LoopTimes values can be safely
passed to S3BootScriptSaveMemPoll() thanks to the previous patch.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Register key notify for toggle state (CapsLock, NumLock and ScrollLock)
sync between multiple keyboards.
The implementation for this feature requires keyboard driver supports
EFI_KEY_STATE_EXPOSED, and turns on physical TextInEx partial key
report for toggle state sync.
The virtual TextInEx will report the partial key after it is required
by calling SetState(X | KEY_STATE_VALID_EXPOSED) explicitly.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
This commit refines the logic for the CvtNum function. It avoids using the
decrement operator '--' for array index to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
For variable name, it should contain lower case characters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch remove the ASSERT when receive a DHCP packet large than the maximum
cache buffer size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=290
Current SmmVariableGetStatistics() in VariableSmm.c is always
checking input InfoSize against the first variable info,
it is incorrect.
For instance, there are three variables.
BootOrder
Boot0000
Boot0001
If the input InfoEntry is holding the second variable info (Boot0000)
and InfoSize is sizeof (VARIABLE_INFO_ENTRY) + StrSize (L"Boot0000"),
current code will return EFI_BUFFER_TOO_SMALL, but it should return
the third variable info (Boot0001).
This patch is to refine the code logic.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current code in SmmVariableHandler() checks CommBufferSize
buffer to make sure it points to outside SMRAM in
"case SMM_VARIABLE_FUNCTION_GET_STATISTICS".
But after eaae7b33b1,
CommBufferSize buffer points to SMRAM that was used by
SMM core to cache CommSize from SmmCommunication protocol,
then the check will fail definitely and GET_STATISTICS
feature breaks.
In fact, do not need check CommBufferSize buffer at all
even before eaae7b33b1.
Before eaae7b33b1,
CommBufferSize buffer pointed to gSmmCorePrivate->BufferSize
that is outside SMRAM, the check will success definitely;
after eaae7b33b1,
CommBufferSize buffer points to local variable BufferSize
(in SMRAM) in SmmEntryPoint(), the check is not needed
definitely.
The patch is to remove the check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PlatformBootManagerBeforeConsole() might want to trigger this event
to connect ConIn so BdsDxe initializes this event before
PlatformBootManagerBeforeConsole().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
The bug is caused by using already freed memory.
If there is already an attempt and execute
'reconnect -r' command, all the ConfigFormEntry structure
will be freed in IScsiDriverBindingStop, but the
mCallbackInfo->Current is not configured as null and
this pointer will be used again in IScsiFormExtractConfig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
* Introduce a generic Debugger Configuration protocol.
* Add private configuration data in the EBC Debugger and make it
register the Debugger Configuration protocol on initialization.
* Add a shell application that uses the protocol above to access
the private data in order to configure the EBC debugger.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current code is using L'\0' to compare with a ASCII char.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function EdbLoadCodBySymbolByIec(), AsciiStrGetNewTokenField() at line
1589 will return NULL if the first character in 'LineBuffer' is '\0'. But
the previous if statement at line 1576 ensures the above case will not
happen.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function DebuggerDisplaySymbolAccrodingToAddress(), when variable
'CandidateAddress' (returned by EbdFindSymbolAddress function) equals
(UINTN) -1, it also indicates that the symbol is not found at the given
address.
This commit adds this missing check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add checks for the return value of function Atoi() in EdbCmdBreakpoint.c.
If the input parameter 'CommandArg' contains non-digit character, print
corresponding error message.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Operands in a bitwise operation should have the same size to eliminate
unexpected results.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In current DriverSampleDxe, the sample code of password is
not a good example, so we plan to remove it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current SetupBrowser, the logic related to non-interative password
is not correct. How to support it correctly or whether support it
is still under investigation. First step remove the incorrect logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when the password is not supported, pop up a dialogue
to let user know the reason.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VM related defs are now in EbcVmTest.h, and opocode related definitions in
Ebc.h.
Because it is used by both the EBC Debugger and driver,
EbcDebugSignalException() sees its definition factorized in
EbcDebuggerHook.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* This patch introduces EbcDebuggerHook.c/h and inserts the required
EBCDebugger references into the existing EBC source files.
* With all the hooks defined to their empty version in EbcDebuggerHook.c
the existing EBC VM behaviour is left unaffected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When returning selectable menu, should return the menu in current form,
the codes miss to do the check. Now returning the selectable menu behind
the codes "if ((UINTN) Distance + NextMenuOption->Skip > GapToTop)".
Then can cover the check, can return the menu correctly.
https://bugzilla.tianocore.org/show_bug.cgi?id=232
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch updates the PXE driver to drop the input DHCP packet if it
exceed the maximum length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Current implementation always creates PlatformRecovery0000
pointing to \EFI\BOOT\BOOT$(ARCH).efi but it may overwrite
PlatformRecovery#### created before (maybe by a DXE driver).
The patch only uses the smallest unused option number for
the \EFI\BOOT\BOOT$(ARCH).efi PlatformRecovery#### to avoid
overwriting already-created PlatformRecovery####.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jie Lin <jie.lin@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The implementation doesn't check the LoadOptions[Index].Status but
only depends on the Status returned from
EfiBootManagerProcessLoadOption(), which results only the first
PlatformRecovery#### runs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jie Lin <jie.lin@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The memory will be set to background color after success allocate
the data, so not need to call AllocateZeroPool.
Related bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=223
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch made the following change:
* DataItem->Status should be updated to the status code.
* Data should not be freed if EFI_NOT_READY returned.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
v2:
* Separate out the return status fix.
* Replace IP4_MASK_MAX with IP4_MASK_NUM.
* Remove the ON_EXIT label.
This patch is used to add the wrong/invalid subnet check.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The 3rd party image should be loaded after EndOfDxe event signal and
DxeSmmReadyToLock protocol installation. But non-SMM platform doesn't
published DxeSmmReadyToLock protocol.
So the SecurityStubDxe can only depend on EndOfDxe event.
This patch enhances the SecurityStubDxe to listen on
DxeSmmReadyToLock protocol installation and if any 3rd party image
is loaded before DxeSmmReadyToLock, it reports failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The patch adds check of deferred images before booting to OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The images not from FV are treated as 3rd party images. They will
be deferred to dispatch when they are dispatched before EndOfDxe
event.
It's a new feature in the BS.LoadImage() path which can disallow
executing 3rd party images before EndOfDxe and re-execute them
after EndOfDxe (through EfiBootManagerDispatchDeferredImages
introduced in next commit).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Dump new stack base and size information could help developer to narrow down
stack crash issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The previous ESRT driver unconditionally treat FMP to be
ESRT_FW_TYPE_DEVICEFIRMWARE.
EDKII System Capsule reuses FMP, but it is ESRT_FW_TYPE_SYSTEMFIRMWARE.
Add check to ImageTypeId check to see if it is ESRT_FW_TYPE_SYSTEMFIRMWARE.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
If there are two DynamicEx PCDs have the same PCD token number but
in different PCD token spaces, the PcdGetNextToken function may get
the wrong PCD token.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=190
The issue is with signed/unsigned comparisons between
Mode->CursorRow and Row and Mode->CursorColumn and Column.
The fix is to add typecast to UINTN for comparisons.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Brian Johnson <bjohnson@sgi.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Brian Johnson <bjohnson@sgi.com>
Jeff Fan
Ruiyu Ni
Dandan Bi
Liming Gao
Jiaxin Wu
Ard Biesheuvel
Laszlo Ersek
Star Zeng
Zhang Lubo
Hao Wu
Zhang, Chao B
Leo Duran
Thomas Huth
Fu Siyuan
Pete Batard
Eric Dong
Jiewen Yao
Cinnamon Shia
Michael Kinney