The original code will assert when dealing with those empty FVs.
The fix is used to solve this bug.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This driver searches APPLICATION in FV and installs LoadFile protocol
for every found one. Then, BDS will add BootOption for LoadFile protocol.
It provides the generic way to expose boot option for the internal
application, such as Shell. With this driver, PlatformBds doesn?t need
to specially handle Shell application.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This commit will scan all the EFI raw section instances within the
module's FV to make sure the NVDIMM root device SSDT can be properly
located.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Consider the situation as shown in below chart. The last ACK message has
acknowledged the Tcb->RcvWl2, and all the segments until Tcb->RcvNxt have
been received by TCP driver. The Tcb->RcvNxt is not acknowledged due to the
delayed ACK. In this case an incoming segment (Seg->Seq, Seg->End) should
not be accepted by TCP driver, and an immediate ACK is required.
Current TcpSeqAcceptable() thought it’s an acceptable segment incorrectly, it
continues the TcpInput() process instead of sending out an ACK and droping the
segment immediately.
Tcb->RcvWl2 Tcb->RcvNxt Tcb->RcvWl2 + Tcb->RcvWnd
Seg->Seq Seg->End | |
| | | | |
---+-----+---------------+-------------+--------------------------+-----------
<income segment> <----Acceptable Range--- -->
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Eugene Cohen <eugene@hp.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
- abstrated to abstracted
- accessibla to accessible
- addres to address
- apropriate to appropriate
- arry to array
- availabe to available
- avaliable to available
- becasue to because
- correponding to corresponding
- etablished to established
- exeuction to execution
- extensiable to extensible
- fileds to fields
- loadding to loading
- ptototypes to prototypes
- prococol protocol
- requried to required
- resoruce to resource
- runing to running
- uild to build
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
HiiConfigRoutingRouteConfig function returns 'Progress' to indicate
the failure info in the ConfigResp string. But when fail to route the
ConfigResp for EfiVarStore, it doesn't return the correct failure info.
Now this patch is to fix this issue and add debug info let user know the
reason of failure.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
IP4_CONFIG2_INSTANCE->DataItem is used to save the configuration
data to NV variable. When the policy is changed from static to
DHCP, DnsServers info will be cleaned from DataItem first
(See Ip4Config2SetPolicy), it's correct because DnsServers info
should not be saved to NV variable.
But if there is any DnsServers info received from DHCP message, it
will be reset to DataItem again (See Ip4Config2SetDnsServerWorker),
which may cause the NV variable contain the DnsServers info while
the policy is DHCP (See Ip4Config2WriteConfigData).
Then, while the platform is reset, the issue happened. Because
Ip4Config2DataTypeDnsServer is set under DHCP policy, which is not
allowed by UEFI Spec and error returned.
This patch is used to resolve this potential issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The UefiPxeBcDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
UefiPxe4BcDxe.lib(PxeBcDhcp.obj) : error LNK2001: unresolved external
symbol __allmul
The cause is line 1659 in file
MdeModulePkg/Universal/Network/UefiPxeBcDxe/PxeBcDhcp.c. The third
parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
This is a enhancement to support the case when platform firmware
doesn't support Boot Manager Menu. For now, if BootManagerMenu FFS
can not be retrieved from FV, BDS core code will still register a
boot option for it. Then, this non-functional boot option will
still be booted by user's request (like HotKey or Exit from shell)
to cause additional boot time and error status code reported.
Therefore, it would be good to skip BootManagerMenu boot option
registration and then return error status and Invalid BootOption
data for this case so that the BootManagerBoot() or other consumers
can directly return without doing anything.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Let data of DXE memory status code can be used by other modules.
1. Save the address of DXE memory status code table to DxeConfigurationTable.
2. Save the address of SMM memory status code table to SmmConfigurationTable.
3. Move RUNTIME_MEMORY_STATUSCODE_HEADER to its public header file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The 'Sting' is returned by the function GetUnicodeStringTextAndSize.
If it is NULL, function GetUnicodeStringTextAndSize will return
EFI_OUT_OF_RESOURCES, and error handling codes will cover it.
So the pointer 'Sting' can not be NULL when using it.
So we can add the ASSERT codes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Use real nasm instruction to replace DB bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/S3Asm.asm to X64/S3Asm.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Use real nasm instruction to replace DB bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
IA32/S3Asm.asm to IA32/S3Asm.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/EbcLowLevel.asm to X64/EbcLowLevel.nasm
And, manually update nasm code to use mov rcx, dword value and generate
the same assembly code with rcx register to asm code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/EbcLowLevel.asm to Ia32/EbcLowLevel.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/AsmFuncs.asm to X64/AsmFuncs.nasm
Note: Also applied many manual cleanups where conversion script failed
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/AsmFuncs.asm to Ia32/AsmFuncs.nasm
Note: Also applied many manual cleanups where conversion script failed
And, update Vect2Desc() to be same to original logic
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/PageFaultHandler.asm to X64/PageFaultHandler.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Without this change, after converting this code to NASM, this error
will be reported:
error: comma or end of line expected
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
NASM doesn't support EXTERNDEF, so convert this to PUBLIC.
This will make it easier to convert this code to NASM using an
automated script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Without this change, after converting this code to NASM, this error
will be reported:
error: invalid combination of opcode and operands
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
This patch is used to fix the wrong IpSb->State update issue.
Issue reproduce steps:
1 .First PXE boot, then boot to shell;
2. ifconfig -s eth0 dhcp (Success);
3. Reboot and do PXE, then boot to shell;
4. ifconfig -s eth0 dhcp (Platform failed to get IP address no matter
how many times retried.)
Root cause:
On step3 reboot, policy is DHCP (Changed by step2). So, Ip4Dxe driver
will try to get one IP address from DHCP server automatically. Before
it get the IP address successfully, the IpSb->State will be always in
IP4_SERVICE_STARTED status until the Instance->Dhcp4Event is triggered,
then it can be changed to IP4_SERVICE_CONFIGED. But the DHCP process
will be interrupted by PXE boot, which will change the policy to static,
and the Instance->Dhcp4Event will be also closed directly. However,
current implementation doesn't update the IpSb->State to
IP4_SERVICE_UNSTARTED status in such case. So, failure happened.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Per UEFI spec the successful returning of boot option triggers boot
to UI. But when the BootNext just points to UI, it causes confusing.
So the patch avoids booting to UI again when the BootNext points to
UI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Per UEFI spec the successful returning of boot option triggers boot
to UI. But when the BootNext just points to UI, it causes confusing.
So the patch avoids booting to UI again when the BootNext points to
UI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When Hii variable is not present and if we try to update a variable offset
with some value, we are creating a new variable by Zeroing all the variable
offsets except the one which we are trying to update.
This will override all the other variable default values which are
programmed as a part of initial PCD definition.
DXE PCD driver could be enhanced to combine the DynamicHii
PCDs(related to same variable) default values and only update the offset
PcdSetXXX want to set, then set the combined values to variable.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When adding font package, there exists the case that only have the
EFI_HII_GIBT_GLYPH_DEFAULT or EFI_HII_GIBT_GLYPHS_DEFAULT glyph block
and use the default cell info in font package fixed header. In this
case, we can't get the correct baseline now. This patch is to fix this
issue by recalculating the baseline when the glyph block type is
EFI_HII_GIBT_GLYPH_DEFAULT or EFI_HII_GIBT_GLYPHS_DEFAULT.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add gPerformanceProtocolGuid in BdsDxe.inf explicitly.
Currently, BdsDxe could build pass as it inherits
gPerformanceProtocolGuid from UefiBootManagerLib.inf.
Also update the usage of gPerformanceProtocolGuid in UefiBootManagerLib.inf.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Adding an option in HII menu so user can choose memory type to use when
creating a RAM Disk in system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
The 'Size' numeric value used when creating a raw RAM disk does not
require a varstore to save its previous value in the create raw RAM disk
HII page.
The expecting behavior is that after a user created a raw RAM disk, the
next time when the create raw RAM disk page is entered, the 'Size' numeric
will be the default value (EFI_PAGE_SIZE).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This patch is used to update IP4->Configure() to allow the upper layer
modules to obtain a default address by setting UseDefaultAddress to TRUE
when default address is not available yet.
Cc: Ye Ting <ting.ye@intel.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tested-by: Sriram Subramanian <sriram-s@hpe.com>
When add Font Package, the cell in EFI_HII_FONT_PACKAGE_HDR
contains the measurement of the widest and tallest characters
in the font. The measurement may be not absolutely correct,
so when use this cell information to calculate the baseline may
cause incorrect result. Besides this calculation is not necessary.
So remove it now.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When render string to screen, for proportional fonts,
the background color may not set to the whole BltBuffer.
And this will cause incorrect display.
Now initialize the background color to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2:
*Refine the coding style according edk2 community's feedback.
Current SNP UNDI Initialize command does not follow the UEFI Spec
to update the SNP MediaPresent field. The result for the Initialize
command execution check should be:
StatFlags: (1) Monitor the upper two bits (14 & 15) in the field to know
whether the command has been executed by the UNDI (Not started, Queued,
Error, Complete). (2) Check the other field to see if there is an active
connection to this network device (used to update MediaPresent).
StatCode: After command execution completes, either successfully or not,
this field contains the result of the command execution (success or failure).
This patch is used to fix it.
NOTE: If any UNDI driver does not follow the UEFI Spec for the media status
update, it may meet failure with this more conditions check (StatFlags).
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
In Ip4CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Potentially uninitialized local variables 'TableKey' and 'TableHeader'
might be used in functions RamDiskPublishNfit() and RamDiskUnpublishNfit()
in file RamDiskProtocol.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
This patch is used to remove the status check for SockProcessRcvToken.
It's not return EFI_STATUS.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The following codes are useless and cause memory leak issues.
So now remove them.
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
There is absolutely no reason to artificially limit the SKU range to 1-255.
PI1.4a spec fixed the artificial limitation.
This patch is to follow PI1.4a spec to remove the sentence
"The valid SkuId range is 1 to 255." from SetSku function comments.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When copy new string content to BufferValue, need to clean the
BufferValue firstly, or the BufferValue may contain some
content that doesn't belong to the new string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When submit form fail, the progress point to the first fail part
in ConfigResp, so should free the ConfigResp after Progrss has
been processed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The RamDiskDxe driver originally uses a variable-length HII varstore to
retrieve the HII checkbox status of each registered RAM disk.
However, HII does not support the variable-length varstore feature.
Therefore, only the checkbox status for the first 8 RAM disks are tracked
for the following definition of HII varstore structure considering the
alignment:
typedef struct {
UINT64 Size;
UINT8 RamDiskList[0];
} RAM_DISK_CONFIGURATION;
This commit uses the private data of each registered RAM disks to track
the HII checkbox status instead to resolve the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The RamDiskDxe now will report RAM disks with reserved memory type to NFIT
in the ACPI table.
This commit will also make sure that an NVDIMM root device exists in the
\SB scope before reporting any RAM disk to NFIT.
To properly report the NVDIMM root device, one will need to append the
following content in the [Rule.Common.DXE_DRIVER] field in platform FDF
files:
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Make sure "BootFileName" is not overloaded before use it in PXE driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenzhihui <chenzhihui4@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In current code will always call submit callback function,
but we should call submit callback function when has no failure
in the submit action. This patch to fix this issues.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When RouteConfig function fail in SubmitForForm or SubmitForFormSet
function, we should restore the question value base on the failure
information, should not restore all the question.
This patch to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Some UNDI drivers may not support the cable detect in UNDI INITIALIZE command,
but support the media present check in UNDI GET_STATUS command. Current SNP
driver will set the MediaPresentSupported field to FALSE in EFI_SIMPLE_NETWORK_MODE
for such case, which forbid the media detect from the callers.
This patch updates the SNP driver to support such kind of UNDIs for media detect.
MediaPresentSupported will be set to TRUE, and a GET_STATUS command will be issued
immediately after INITIALIZE command in SNP->Initialize() function, to refresh
the value of MediaPresent in SNP mode data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
EFI_PXE_BASE_CODE_PROTOCOL has interface to set the TTL and ToS value, but
not used by the UdpWrite() interface. The code always use a hard coded 16
for the TTL and 0 for ToS.
This patch update the UpdWrite() to use the TTL and ToS which have been set
by the SetParameters().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update FpdtDxe to use fixed SMM communication buffer to get
performance data by SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET API.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update FpdtSmm to handle SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET
request.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add a driver to publish EDKII_PI_SMM_COMMUNICATION_REGION_TABLE, so that
other DXE driver can consume this table directly. NOTE: This is sample driver.
A platform may uses its own way to define default SMM communication buffer
region and publish information in its own
EDKII_PI_SMM_COMMUNICATION_REGION_TABLE.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng, Tian <feng.tian@intel.com>
The Hii runtime support feature will export the content of
HiiDatabase and the ConfigResp string to runtime buffer
after ReadyToBoot event is triggered. If some drivers
add/update/remove packages from Hiidatabase after ReadyToBoot:
Originally we will both export the content of HiiDatabase and
the ConfigResp string for all packages.
But now after investigation, we found only for form packages need
to export the content of HiiDatabase and the ConfigResp string,
for other packages just need to export the content of HiiDatabase.
Now to enhance this logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
When the type of HiiValue is BUFFER Type, the BufferValue
of the related question can not be NULL, so can remove the
check.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Allow EfiVarStore to get <AltResp> from Hii Driver, and enhance code logic
in MergeDefaultString function to get a full AltCfgResp.
The logic in function MergeDefaultString after enhancement:
(1) If there are no <AltResp> in AltCfgResp, merge the <AltResp> in
DefaultAltCfgResp to AltCfgResp.
(2) If there are <AltResp> in AltCfgResp, for the same <AltConfigHdr>, if
the <ConfigElement> already in AltCfgResp, don't need to merge from
DefaultAltCfgResp, else merge the <ConfigElement> in the DefaultAltCfgResp
to the related <AltResp> in AltCfgResp.
AltCfgResp: Generated by Driver.
DefaultAltCfgResp: Generated by HiiDatabase.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the sample case for orderedlist to get standard
default value from Callback function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For orderedlist question, the value is stored in a buffer,
not in HiiValue. So when need to get default value from callback
function for orderedlist, need to pass the buffer.
This patch is to enhance this logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add 2 macros inNetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number.
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
The S3Ready() functional code in AcpiS3SaveDxe of IntelFrameworkModulePkg
is to do ACPI S3 Context save. In fact, that is not really related to
Intel framework ACPI S3 protocol.
IntelFrameworkModulePkg will be deprecated step by step, so move the
functional code to MdeModulePkg and S3SaveStateDxe is a good place.
The ACPI global variable related code is leaved as is in IntelFrameworkModulePkg
AcpiS3SaveDxe for compatibility.
PcdS3BootScriptStackSize is also moved from IntelFrameworkModulePkg.
The functional code need to get ACPI FACS table and consume LockBoxLib,
so need to be before DxeSmmReadyToLock that will shut down SMM lock box
interface, EndOfDxe is a good point (OVMF AcpiS3SaveDxe has the reference
implementation).
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Arbitrary length of packet may be received from network, including the
packets with zero payload data or malformed protocol header. So the code
much check the actually received data size before using it. For example, in
current edk2 network stack, an zero payload UDP packet may cause the
platform ASSERT in NetbufFromExt() because of the zero fragment number.
This patch update the IpIoLib and UdpIoLib to check and discard the zero
payload data packet to avoid above assert. Some other network drivers are
also updated to check the packet size to guarantee the minimum length of
protocol header is received from upper layer driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This reverts commit 31ae446b1a.
Changing the receive FIFO depth in Terminal driver Start() is not
recommended.
A new PCD PcdUartDefaultReceiveFifoDepth was added and
MdeModulePkg/SerialDxe driver uses the PCD as the default receive
FIFO depth.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
EndingAddress is calculated incorrectly. Original code calculates it as
(StartingAddress + Size). Correct value should be (StartingAddress +
Size - 1.
Note:
Besides the changes made by Samer, Hao also fixed a similar issue in
RamDiskImpl.c
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
There are scenario when the BindingStop service of PartitionDxe driver be
re-entered.
An example will be ejecting a DVD from a SATA DVDROM and then run
"reconnect -r" under shell. In this specific case, part of the calling
stack will be:
PartitionDriverBindingStop() (PartitionDxe) ->
Stop first child handle (PartitionDxe) ->
ScsiDiskFlushBlocksEx() (ScsiDiskDxe) ->
A media change is detected (ScsiDiskDxe) ->
Reinstall of BlockIO(2) protocols (ScsiDiskDxe) ->
Entering PartitionDriverBindingStop() again (PartitionDxe) ->
Potential risk of referencing already stopped child handle (PartitionDxe)
...
The current code has potential issue of referencing of already stopped
child handle. This commit adds re-entry handling logic to resolve such
issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Set UART receive FIFO depth with PCD instead of fixed number "1".
The default value of PCD is also 1, so it makes no difference for
platforms which do not explicitly set this PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Found an issue that file system cannot be started on a DVD when doing the
following process:
Boot to shell with a DVD inside a SATA DVDROM. Eject the DVD and run
"reconnect -r". Put the DVD inside again and run "reconnect -r".
The cause is that after executing the second reconnect action, DiskIo
immediately returns EFI_NO_MEDIA in function DiskIo2ReadWriteDisk() when
checking the media information. However, at this time, the media
information does not get updated by the ScsiDisk driver. Therefore, DiskIo
driver should left the no media check to ScsiDisk driver.
Generally, the media changed and media write protect check should also be
left to lower-level device driver. Thus, these two checks in function
DiskIo2ReadWriteDisk() are also removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some ISO images cannot be recognized properly when they are on media whose
block size is not 2048 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
There is no asynchronous operations to the registered RAM disks link list
maintained within RamDiskDxe driver, therefore, the TPL raise and restore
operations when dealing with the link list are unnecessary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Previously, the code uninstalls the DEVICE_PATH_PROTOCOL with the device
path given by caller of the 'RamDiskUnregister' function. The given device
path might be different from the one used to install the
DEVICE_PATH_PROTOCOL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The 'DisconnectController' function calls after
'UninstallMultipleProtocolInterfaces' are unnecessary, since
'DisconnectController' is called inside function
'UninstallMultipleProtocolInterfaces'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In UEFI2.6, CapturePtr's in the Captures array returned by MatchString
are to be separatedly allocated so that they can be freed by the
caller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This is an emergency fix for UINT64 multiplications and divisions not
being done with the right BaseLib functions -- they break Ia32 builds.
Fixes: 30ed3422ab
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
ConSplitter's Absolute Pointer should scale virtual device's resolution like what Simple Pointer do.
Before this change, caller will get Virtual device's resolution but physical device's current point.
This change let caller get Virtual device's resolution with virtual device's current point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In DriverSampleInit, has installed the configAccess protocol to
the DriverHandle[1], but don't uninstall it in DriverSampleUnload.
Now uninstall the configAccess protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Some static scan tool may regard CurrentRsdtEntry to be potentially
referenced to NULL pointer if CurrentRsdtEntry == NULL is used in
the right above if condition judgment.
CopyMem (CurrentRsdtEntry, CurrentRsdtEntry + 1, (*NumberOfTableEntries - Index) * sizeof (UINT32));
It is introduced by commit f9bbb8d9c3.
To avoid it and have same style with
"((Xsdt == NULL) || CurrentTablePointer64 == (UINT64) (UINTN) Table->Table)",
use Rsdt instead of CurrentRsdtEntry to check against NULL.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
1. The consumer of Acpi Sdt Protocol may want to use the API after ReadyToLock.
2. The ACPI system configuration table even could be overwritten,
we see little issue in leaving Acpi Sdt Protocol installed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Fix a possible ASSERT after NBP finishes loading from a PXE
boot. Ip4Dxe driver calls Ip4Config2SetPolicy which calls
CloseEvent on the Dhcp4Event struct member. After NBP is
downloaded, it then calls Ip4Config2CleanInstance which calls
CloseEvent again on Dhcp4Event. This double free can cause an
ASSERT. When the event is closed, set the event pointer to NULL
so the Ip4 code won't call CloseEvent on it again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This feature is aimed to allow OS make use of the HII database
during runtime. In this case, the contents of the HII Database
is exported to a buffer. The pointer to the buffer is placed
in the EFI System Configuration Table, where it can be retrieved
by an OS application.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Brian J. Johnson <bjohnson@sgi.com>
Cc: Andrew Fish <afish@apple.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Remove the empty line to conform with current coding style.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The device path protocol doesn't get closed at FvSimpleFilesystem
driver stop() when it's opened at start() with BY_DRIVER mode.
We change it to open DevicePath with GET_PROTOCOL mode as FV2 protocol with BY_DRIVER is enough.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Git version '3d0a49ad' commit provided a scenario to resolve the
performance issue for IPv4, but it's not workable for IPv6. To
avoid IPv4 and IPv6 inconsistency, we decided to revert that version
fix.
If so, the default policy for Ip4Config2 is Ip4Config2PolicyDhcp,
which results in all NIC ports attempting DHCP. So, this patch is
used to changes the the default IPv4 config policy to
Ip4Config2PolicyStatic and also defer the SetData operation after
Ip4Config2Protocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip4Config2Protocol.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The StringSize variable in the FindStringBlock function is a IN OUT
parameter of the GetUnicodeStringTextOrSize function.
Thought the GetUnicodeStringTextOrSize function changes the value of
the StringSize variable, it is better to initialize the StringSize
variable before passing it to the GetUnicodeStringTextOrSize function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The RamDiskDxe driver will:
1. Produce the EFI RAM Disk Protocol
2. Install RAM disk device path and block I/O related protocols on the
RAM disk device handle.
3. Install RAM disk configuration form to HII database
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
v3:
*
When there exists duplicate items in VLAN variable , save the correct
variable content back to the variable storage after duplicate items are removed
Duplicate items in VLAN variable will cause MNP driver binding
start function fall into infinite loop,so we should check it's
content before using it.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The ISO C standard says about free(),
If ptr is a null pointer, no action occurs.
This is not true of the FreePool() interface of the MemoryAllocationLib
class:
Buffer must have been allocated on a previous call to the pool
allocation services of the Memory Allocation Library. [...] If Buffer
was not allocated with a pool allocation function in the Memory
Allocation Library, then ASSERT().
Therefore we must not forward the argument of free() to FreePool() without
checking.
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Cc: Yao Jiewen <Jiewen.Yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-By: Cinnamon Shia <cinnamon.shia@hpe.com>
The assignment of CurrentRsdtEntry and its subsequent dereference are
subject to the same condition, but for some reason, VS2008 does not see
that and warns about the dereference possibly involving an uninitialized
pointer. Since the single statememt between the blocks is unrelated, we
can just move it and merge the two conditional blocks together.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Now we add new HII action type EFI_BROWSER_ACTION_SUBMITTED in
EFI HII Configuration Access Protocol, so add the test case in
DriverSample to show how to use it and whether it works.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add new HII action type EFI_BROWSER_ACTION_SUBMITTED
to notify HII driver when its question values are submitted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
AARCH64 systems never require compatibility with legacy ACPI OSes, and
may not have any 32-bit addressable system RAM. To support ACPI on these
systems, we need to be able to relax the 4 GB allocation restriction.
So add a PCD PcdAcpiExposedTableVersions containing a bitmask describing
which ACPI versions are targeted, and wire it up it up to the memory
allocation calls in AcpiTableDxe/AcpiTableProtocol.c. I.e., if ACPI v1.0b
is not among the supported versions, the memory allocations are not limited
to 4 GB, and only table types that carry 64-bit addresses are emitted.
Note that this will inhibit the publishing of any tables that carry only
32-bit addresses, i.e., RSDPv1, RSDTv1 and RSDTv3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
when has next line to draw, should not overwrite the BltX
to 0, instead should keep the BltX value that pass into
StringToImage function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
UEFI Spec 2.3.1.D Section 9.3.5.1 says Partitions are numbered
according to their entry in their respective partition table,
starting with 1.
Update the code for MBR partition to follow this rule.
Ref: https://github.com/tianocore/edk2/issues/50
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch fixes a bug in SNP driver that the Cdb.StatCode should be check with
PXE_STATCODE_SUCCESS instead of EFI_SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
SNP driver will print the UNDI returned StatFlags:StatCode with DEBUG macro,
while in some please it uses the reverse order (StatCode:StatFlags). This patch
is to make the print info consistent, that StatFlags always come first.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Refine the function comments in ConfigKeywordHandler.c and
HiiDatabase.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI spec, a BUFFER_FULL return status in UNDI Transmit command
indicates UNDI "Transmit buffer is full. Call Get Status command toempty
buffer." So this patch updates the SNP Transmit to return EFI_NOT_READY for
BUFFER_FULL to let the call know the buffer full status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The MNP and SNP are independent drivers so the MNP_TX_BUFFER_INCREASEMENT could choose
any value as needed. While this patch update the default value of this macro to 32,
to be same as the maximum recycled buffer numbers in one UNDI GetStatus command. It is
a workaround for some incorrect UNDI drivers which may not return the correct statuses
for the SNP and MNP to correctly retry/call GetStatus to clear the buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Update the DBsize in GetStatus command to let UNDI return an array of recycled
buffers. This is to make the loop at the end of PxeGetStatus() useful and to
prevent buffer overflow with some non-conformant UNDI drivers which not check
the value of the input DBsize in UNDI GetStatus command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Description of the GetNextHighMonotonicCount does not state that the counter
is incremented on calling this function. However, the example usage of this
API documented relies on this behavior.
UEFI 2.6 spec is to update description to match usage documented.
The high 32-bit value is nonvolatile and is increased by 1 whenever the system
resets whenever the low 32-bit count (returned by GetNextMonoticCount()) overflows.
->
The high 32-bit value is nonvolatile and is increased by 1 whenever the system
resets, whenever GetNextHighMonotonicCount() is called, or whenever the low
32-bit count (returned by GetNextMonoticCount()) overflows.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19773 6f19259b-4bc3-4df7-8a09-765794883524
UEFI 2.6 spec has minor update to the Data parameter for GetVariable(),
and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data The buffer to return the contents of the variable.
->
Data The buffer to return the contents of the variable. May be NULL
with a zero DataSize in order to determine the size buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19771 6f19259b-4bc3-4df7-8a09-765794883524
String opcode has HiiValue and BufferValue,BufferValue for string content,
HiiValue for StringId.Function GetQuestionValue only update the
BufferValue(string content),but the StringId and string content
do not match,now fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19750 6f19259b-4bc3-4df7-8a09-765794883524
The BlockData is expected to be NULL when to call function
IsThisOpcodeRequired in each opcode,but now exists case that the
Blockdata not be cleaned,then will be used in other opcode.it
is not correct,now add the check before use.
The comments and logic in function IsThisOpcodeRequired are not
consistent,now refine the code to make the logic clear.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19749 6f19259b-4bc3-4df7-8a09-765794883524
The Serial IO protocol instances provided by SerialDxe and consumed by
TerminalDxe come with a Mode.ReceiveFifoDepth=1 default setting, as
required by UEFI 2.5.
Although TerminalDxe calls EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the
TerminalDriverBindingStart() and TerminalConInTimerHandler() functions, it
only does so to change the Mode.Timeout member. Other members of Mode,
including Mode.ReceiveFifoDepth, are preserved.
On some platforms this causes the UART that underlies TerminalDxe not to
have enough room for bursts of scan codes, which translates to broken
parsing of escape sequences, e.g. cursor movement keys.
According to the UEFI spec, passing ReceiveFifoDepth=0 to
EFI_SERIAL_IO_PROTOCOL.SetAttributes() "will use the device's default FIFO
depth". While TerminalDxe could try to configure a receive FIFO depth that
matches the longest escape sequence it wishes to parse, in practice the
device-specific default FIFO depth -- which may well differ from the
spec-mandated SerialIo->Mode.ReceiveFifoDepth=1 default -- seems to work.
Hence let's just set that.
This issue was exposed by SVN r18971 / git commit 921e987b2b
("ArmPlatformPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg").
In that conversion, MdeModulePkg's SerialDxe started to initialize
Mode.ReceiveFifoDepth to 1 (in conformance with the spec), unlike the
prior, non-conformant initialization to 0 in EmbeddedPkg's SerialDxe.
Since TerminalDxe would never change ReceiveFifoDepth from the new default
value 1, and the ArmPlatformPkg/Drivers/PL011Uart library instance,
underlying SerialDxe through SerialPortLib, would obey it too, they would
collectively effect a receive queue depth of 1, rather than the default 16
or 32. This broke cursor keys on the ARM FVP and Juno platforms.
It is the client of EFI_SERIAL_IO_PROTOCOL that is responsible for
modifying the attributes, if the defaults are not appropriate, hence this
patch modifies TerminalDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ryan Harkin <ryan.harkin@linaro.org>
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/4779/focus=6553
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/6594
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19701 6f19259b-4bc3-4df7-8a09-765794883524
In "11.8 Serial I/O Protocol", UEFI 2.5 requires:
The default attributes for all UART-style serial device interfaces are:
(a) 115,200 baud,
(b) a 1 byte receive FIFO,
(c) a 1,000,000 microsecond timeout per character,
(d) no parity,
(e) 8 data bits,
(f) and 1 stop bit.
It also says, about the EFI_SERIAL_IO_MODE.ControlMask member:
(g) A mask of the Control bits that the device supports. The device must
always support the Input Buffer Empty control bit.
SerialDxe complies with requirement (b) via hard-coded constants. It
complies with requirements (a), (d), (e) and (f) through PCD defaults (see
MdePkg/MdePkg.dec):
(a) 115,200 baud:
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200|UINT64|0x00000020
(d) no parity:
# 1 - No Parity.<BR>
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity|1|UINT8|0x00000022
(e) 8 data bits:
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits|8|UINT8|0x00000021
(f) 1 stop bit:
# 1 - One Stop Bit.<BR>
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits|1|UINT8|0x00000023
SerialDxe does not comply with requirements (c) and (g). In this patch, we
fix (c), and leave (g) for later.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19700 6f19259b-4bc3-4df7-8a09-765794883524
Per secure MOR implementation document, it is not proper to add MOR lock in non-SMM version, because DXE version can not provide protection.
This patch add standalone TcgMorLockDxe implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19689 6f19259b-4bc3-4df7-8a09-765794883524
Microsoft published secure MOR implementation at https://msdn.microsoft.com/en-us/library/windows/hardware/mt270973(v=vs.85).aspx
with revision 2 update. See URL for tech detail.
Previous revision 1 is handled in SecurityPkg\Tcg\ MemoryOverwriteRequestControlLock.
But the VarCheck API can not satisfy revision 2 requirement.
So we decide include MOR lock control into variable driver directly.
This patch add standalone TcgMorLockSmm implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19688 6f19259b-4bc3-4df7-8a09-765794883524
The MenuOption insert to gMenuOption allocate memory every time,but not free.
Now add the code to free it.And for Date/Time,it will create 3 menus,but previously
the Description point to the same address,so when free the Description,it will cause
issue,now reset the Description pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19647 6f19259b-4bc3-4df7-8a09-765794883524
When the GOP doesn't support the resolution specified by
PcdVideoHorizontalResolution and PcdVideoVerticalResolution,
the code tries to set the resolution to 800x600 but uses the resolution
equals to the PCD when calculating the text print position.
The patch fixes the bug by updating the resolution to 800x600 for
this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19630 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates the MNP driver to recycle TX buffer asynchronously, instead
of using a while loop wait after each transmit command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19624 6f19259b-4bc3-4df7-8a09-765794883524
This patch fixes a bug in SNP.GetStatus() interface. The UNDI driver may return
multiple transmitted buffers in a single GetStatus command, while SNP.GetStatus
could only return one pointer each time, the rest of them are lost. This patch
fixes this issue by store these recycled pointer in a temporary buffer in SNP
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19623 6f19259b-4bc3-4df7-8a09-765794883524
The MenuOption insert to gMenuOption allocate memory everytime,but not free.
Now add the code to free it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19593 6f19259b-4bc3-4df7-8a09-765794883524
Add error handling code to enhance the code,the driver may not install
the ConfigAccess protocol,so should not just ASSERT here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19590 6f19259b-4bc3-4df7-8a09-765794883524
Variable driver uses gEdkiiFaultTolerantWriteGuid hob and copies data to NvStorageData if hob exists.
But if ftw driver executes prior to variable driver then spare block is erased.
So the patch is to enhance the code to do not check FTW last write data hob if FTW protocol has been installed.
Cc: Liming Gao <liming.gao@intel.com>
Reported-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19577 6f19259b-4bc3-4df7-8a09-765794883524
The code wrongly has TempFlag wrote to NV flash, but has Flag assigned to NV cache.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19573 6f19259b-4bc3-4df7-8a09-765794883524
HwErrVariableTotalSize/CommonVariableTotalSize/CommonUserVariableTotalSize
need to be initialized to 0 first after reclaim failed, then to be assigned by += operation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19572 6f19259b-4bc3-4df7-8a09-765794883524
Add check to see if there is a media in the disk device. If not return
EFI_NO_MEDIA directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19446 6f19259b-4bc3-4df7-8a09-765794883524
Xcode fails to compile:
error: array type 'VA_LIST' (aka '__builtin_va_list') is not assignable
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19419 6f19259b-4bc3-4df7-8a09-765794883524
On a failed REF_OP callback, all changed fields in the Selection should be restored.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19268 6f19259b-4bc3-4df7-8a09-765794883524
On a failed REF_OP callback, all changed fields in the Selection should be restored.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19245 6f19259b-4bc3-4df7-8a09-765794883524
This should just return an error and not assert. We hit this when testing with a client that was trying to access the old IP4_CONFIG on firmware implementing IP4_CONFIG2.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19219 6f19259b-4bc3-4df7-8a09-765794883524
warning C4311: pointer truncation from 'void *' to 'unsigned long'
warning C4312: conversion from 'unsigned long' to 'void *' of greater size
Update code to convert type to UINTN first, then convert it to other type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Acked-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19114 6f19259b-4bc3-4df7-8a09-765794883524
warning C4456: declaration of 'q' hides previous local declaration.
Update code to use the different local variable name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Acked-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19113 6f19259b-4bc3-4df7-8a09-765794883524
warning C4459: declaration of 'PrivateData' hides global declaration.
Update DriverSampleDxe to rename global variable name to be different.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19112 6f19259b-4bc3-4df7-8a09-765794883524
This Serial driver layers on top of a Serial Port Library instance
to produce serial IO protocol.
There is also another SerialDxe implementation in CorebootPayloadPkg,
but SerialDxe from EmbeddedPkg should be better that also consumes
the extended interfaces GetControl/SetControl/SetAttributes in
EmbeddedPkg/Include/Library/SerialPortExtLib.h for serial IO protocol.
And the extended interfaces GetControl/SetControl/SetAttributes in
EmbeddedPkg/Include/Library/SerialPortExtLib.h has been upstream to
MdePkg/Include/Library/SerialPortLib.h.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18966 6f19259b-4bc3-4df7-8a09-765794883524
The SerialIo->GetControl() function is not required to set the
Control output parameter on error. Make sure we apply the
EFI_SERIAL_INPUT_BUFFER_EMPTY optimization in
TerminalConInTimerHandler() only if the SerialIo->GetControl()
function call set that bit in the Control variable.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18962 6f19259b-4bc3-4df7-8a09-765794883524
This driver produces file explorer protocol layered on top of the FileExplorerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18918 6f19259b-4bc3-4df7-8a09-765794883524
AsciiVSPrint is used in RegularExpressionDxe/Oniguruma/OnigurumaUefiPort.c.
But PrintLib is missing in RegularExpressionDxe.inf.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18721 6f19259b-4bc3-4df7-8a09-765794883524
When StringId is not 0, String returned from GetSmbiosStringById is expected to non-NULL.
Add ASSERT (String != NULL); to ensure this.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18713 6f19259b-4bc3-4df7-8a09-765794883524
1. Correct the return comments of entrypoint function.
2. Add parameters' comments for MeasureSmbiosTable().
3. Correct the Protocols and Guids usage comments in SmbiosMeasurementDxe.inf.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18695 6f19259b-4bc3-4df7-8a09-765794883524
Use EFI_D_VERBOSE instead of EFI_D_INFO in InternalDumpData() and InternalDumpHex().
And also add DEBUG_CODE wrapper to InternalDumpHex() call.
It is to avoid the bother from the internal verbose debug information.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18693 6f19259b-4bc3-4df7-8a09-765794883524
1. Smbios3Table used as SmbiosTable wrongly after SmbiosTable got from configuration table.
2. Use correct VendorGuid and VendorTable to measure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18691 6f19259b-4bc3-4df7-8a09-765794883524
This change is triggered by R18654 "Enhance variable performance by reading from existed memory cache"
that changed the code to use CacheVariable to improve performance.
So the CacheVariable->InDeletedTransitionPtr NULL pointer check needs to be moved to the place before
it is been used.
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18688 6f19259b-4bc3-4df7-8a09-765794883524
The SendForm function can be called nest in it. This function also uses some global variables. So we must save global variable values before it been called again.
Checked in the missing change for gBrowserFormSetList.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18681 6f19259b-4bc3-4df7-8a09-765794883524
This is patch to add smbios measurement.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18680 6f19259b-4bc3-4df7-8a09-765794883524
So that other module can also refer to them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18674 6f19259b-4bc3-4df7-8a09-765794883524
Current variable driver already have memory cache to improve performance.
Change the code which read from physical MMIO address to read from memory cache.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18654 6f19259b-4bc3-4df7-8a09-765794883524
The SendForm function can be called nest in it. This function also uses some global variables. So we must save global variable values before it been called again.
Old implementation miss to save some global variables, this patch fixed it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18650 6f19259b-4bc3-4df7-8a09-765794883524
These messages don't report errors, hence they should be emitted as
EFI_D_INFO (or EFI_D_VERBOSE even).
Cc: Star Zeng <star.zeng@intel.com>
Cc: Drew Jones <drjones@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18621 6f19259b-4bc3-4df7-8a09-765794883524
The "success" messages in FtwRestart(), FtwAbort(), and FtwGetLastWrite()
should be logged on EFI_D_INFO level. We can also unify their format with
the __FUNCTION__ macro.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Drew Jones <drjones@redhat.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18620 6f19259b-4bc3-4df7-8a09-765794883524
The IsValidWorkSpace() function checks if the working block header of the
workspace is valid. A mismatch detected by this function is not
necessarily an error; it can happen with an as-yet unwritten flash chip,
which is e.g. common and normal when a new ArmVirtQemu virtual machine is
booted. Therefore downgrade the message emitted by IsValidWorkSpace() from
EFI_D_ERROR to EFI_D_INFO, and change the wording from "error" to
"mismatch".
The only caller of IsValidWorkSpace(), InitFtwProtocol(), handles all of
the following cases:
(1) IsValidWorkSpace() succeeds for the working block -- this is normal
operation,
(2) IsValidWorkSpace() fails for the working block, but succeeds for the
spare block -- InitFtwProtocol() then restores the working block from
the spare block,
(3) IsValidWorkSpace() fails for both the working and spare blocks --
InitFtwProtocol() reinitializes the full workspace.
In cases (2) and (3), InitFtwProtocol() logs additional messages about the
branch taken. Their current level is EFI_D_ERROR, but the messages are
arguably informative, not necessarily error reports.
Downgrade these messages from EFI_D_ERROR to EFI_D_INFO, so that they
don't clutter the debug output when the PcdDebugPrintErrorLevel mask only
enables EFI_D_ERROR (i.e., in a "silent" build).
These messages have annoyed / confused users; see for example:
- https://bugzilla.redhat.com/show_bug.cgi?id=1270279
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Drew Jones <drjones@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18619 6f19259b-4bc3-4df7-8a09-765794883524
The DHCP4 can have only one configured child instance so we need to reset
the DHCP4 child when leaving PXE driver's LoadFile() function, otherwise the
other programs which also need to use DHCP4 (like HTTP boot) will be impacted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18615 6f19259b-4bc3-4df7-8a09-765794883524
Otherwise there will be build failure if without VarCheckUefiLib linked.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18612 6f19259b-4bc3-4df7-8a09-765794883524
Refine the sample code, add extra ";" to keep consistent for the condition opcode in different use cases.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18607 6f19259b-4bc3-4df7-8a09-765794883524
In current case, if one key was requested to register twice, browser will override old hot key with new one. This behavior is not user friendly.
Now update the logic, return EFI_ALREADY_STARTED for this case. If user still want to override it, he must unregistered it first.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18604 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
So for DynamicDefault, we add assert when set failure. For DynamicHii, we add logic to handle it.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18603 6f19259b-4bc3-4df7-8a09-765794883524
Ip4Config2 protocol implementation must request for DNS server info when the
policy is set to DHCP. And when a DHCP server responds to it with a list of
DNS server addresses, it must parse it and set it for the instance. Without
this, nobody can do a Ip4Config->GetData for DNS server IPs before calling
Dns->Configure(). This will mean a DHCP is initiated when calling
Dns->Configure(), thus causing serious performance issues. This patch
attempts to address this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18560 6f19259b-4bc3-4df7-8a09-765794883524
The pointer to the destination string changed,the max length also changed.Previous change neglect this point.
And base on the code logic,we can use StrCatS to replace StrCpyS.Now this patch is to fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18497 6f19259b-4bc3-4df7-8a09-765794883524
The driver binding start function in SNP.c goes through all the BARs and get
the last BAR index for use. Theoretically it should work with all valid BARs,
but we got reports some device did always use the first valid BAR, so we change
the logic in SNP to use the first found BAR index instead of the last one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18455 6f19259b-4bc3-4df7-8a09-765794883524
PXE driver's LoadFile protocol should check the input parameter
FilePath to see whether it's a supported device path.If not,
it should return invalid parameter, do not continue PXE boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18435 6f19259b-4bc3-4df7-8a09-765794883524
Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18413 6f19259b-4bc3-4df7-8a09-765794883524
Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18411 6f19259b-4bc3-4df7-8a09-765794883524
Our tool can support OrderedList which has default value,but doesn't update the
source code in HiiDatabase when parse the ifr data.Now update the code and add
test case in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18388 6f19259b-4bc3-4df7-8a09-765794883524
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
Previously construct Default Value in AltResp for string opcode is String Id,
Now change it to string value if the string opcode has default value.
This change is compatible for SetupBrowser to handle.And add default value
for string in DriverSample to test this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18337 6f19259b-4bc3-4df7-8a09-765794883524
There may be anti-flash wear out feature to forbid erase operation after end of dxe.
The code is missing some error handling for erase operation failure,
it should return directly after the erase operation failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18320 6f19259b-4bc3-4df7-8a09-765794883524
Since the variable check service has be separated to VarCheckLib
from Variable driver, so update Variable driver to consume the
separated VarCheckLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18286 6f19259b-4bc3-4df7-8a09-765794883524
Check the local variable 'NameSpace' before use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18274 6f19259b-4bc3-4df7-8a09-765794883524
Ip4StartAutoConfig() will always free its default router table and interface,
which may cause IP instance missing its correct default interface. e.g. when
the policy is dhcp, and one child is configured to use default address.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18245 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update the MediaPresent detect declaring.
IP4 driver should re-initiate a DHCP if it detects that there is a network.
To fix this issue, we can implement the DHCP re-initiate policy while the media
change detected. The Ip4 driver should set a timer to signal the Ip4 to run the
DHCP configuration again(D.O.R.A). IP4 driver should free old IP address related
resource, then initiate a DHCP process to acquire new IP.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Lubo Zhang <lubo.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18232 6f19259b-4bc3-4df7-8a09-765794883524
between variable HOB and NV storage.
Variable HOB may be built by a system that supports and loads variable
default, the variables in the HOB will be flush to NV storage after
variable write search ready.
After that, if the variable's Attributes is changed by someone and
system reboots and tries to load default again, the variable Attributes
mismatch case between variable HOB and NV storage will appear.
Original code did not handle the case correctly, that may eventually
cause NV storage contains two valid same variables that will lead to
system hang if GetNextVariableName() called.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18225 6f19259b-4bc3-4df7-8a09-765794883524
DHCP policy is applied as default at boot time on all NICs in the system, which results
in all NIC ports attempting DHCP and trying to acquire IP addresses during boot.
Ip4 driver should only set dhcp as default policy, and not trigger DORA at driver binding
start(). We should start DORA until one IP child is configured to use default address.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18201 6f19259b-4bc3-4df7-8a09-765794883524
Change a macro name to fit EDK2 naming conventions: Use all capital letters for #define.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18200 6f19259b-4bc3-4df7-8a09-765794883524
Once the question is refreshed,the processing should happen in the callback function
of EFI_BROWSER_ACTION_RETRIEVE case,rather than EFI_BROWSER_ACTION_CHANGING in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18150 6f19259b-4bc3-4df7-8a09-765794883524
If the storage of the question is EFI_HII_VARSTORE_BUFFER/EFI_HII_VARSTORE_EFI_VARIABLE_BUFFER,
in SetupBrowserDxe the configuration stings contain uppercase,but HiiDataBaseDxe generates the
ConfigResp string in lowercase,they mismatch,so FindQuestionFromProgress function is broken.
Now convert the configuration string in SetupBrowserDxe to lowercase to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18143 6f19259b-4bc3-4df7-8a09-765794883524
This fix is used to solve VS2015 warning "local variable is not initialized before use"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18108 6f19259b-4bc3-4df7-8a09-765794883524
DHCP4 service allows only one of its children to be configured
in the active state,If the DHCP4 D.O.R.A started by IP4 auto
configuration and has not been completed, the Dhcp4 state machine
will not be in the right state for the PXE to start a new round
D.O.R.A., so we need to switch it's policy to static.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18107 6f19259b-4bc3-4df7-8a09-765794883524
When load default value or save changes will pop up message box to let user
confirm,Y means confirm and N means ignore,now add Esc key with the
same function of N key.And change the content of pop up message in .uni file,
now will display "Press 'Y' to confirm, 'N'/'ESC' to ignore."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18076 6f19259b-4bc3-4df7-8a09-765794883524
Enhance the setupbrowserdxe to output debug message when DisplayEngineDxe is
not installed and this will be easy for user to find the reason why can not
enter Setup page.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18075 6f19259b-4bc3-4df7-8a09-765794883524
Reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
The code is updated to only allocate 2 pages (1G page enabled) or
6 pages for 4G page table, and 8 extra pages to handles > 4G request
by page fault.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18070 6f19259b-4bc3-4df7-8a09-765794883524
We are going to reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
The code is updated to build 4G page table by default and only use 8 extra
pages to handles > 4G request by page fault.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18069 6f19259b-4bc3-4df7-8a09-765794883524
We are going to reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
Current BootScriptExecutorDxe handles > 4G request by page fault because
S3ResumePeim only builds 4G page table when long mode waking vector is
not needed, but BootScriptExecutorDxe still assume the page table buffer for
page table is at 1:1 Virtual to Physical identity mapping.
To reduce reserved memory consumption, the code is updated to only use
8 extra pages to handles > 4G request by page fault.
Another, when both BIOS and OS wants long mode waking vector,
S3ResumePei should have established 1:1 Virtual to Physical identity mapping
page table for ACPI spec requirement, so no need to hook page fault handler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18067 6f19259b-4bc3-4df7-8a09-765794883524
As variable HEADER_ALIGNMENT = 4, the MonotonicCount in
AUTHENTICATED_VARIABLE_HEADER may be not UINT64 aligned,
so go to use ReadUnaligned64() to ensure read data correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18064 6f19259b-4bc3-4df7-8a09-765794883524
GatewayIpAddress and SubnetMask do not exist in old IPv4_DEVICE_PATH, this
will lead new IScsiDxe to error if IPv4_DEVICE_PATH in system is not
updated.
Following UEFI2.5 spec of IPv4_DEVICE_PATH do a check before accessing
fields only defined in new version, add a judgement here to make old
IPv4_DEVICE_PATH and new IScsiDxe can cowork.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
[lersek@redhat.com: rewrapped commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18057 6f19259b-4bc3-4df7-8a09-765794883524
When mismatch happens,there exists one case that exit current
form and display last form.Assert code don't cover this case.
Now add check to handle this situation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18053 6f19259b-4bc3-4df7-8a09-765794883524
The first parameter of match2 opcode should be the pattern
and the second one should be the string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18052 6f19259b-4bc3-4df7-8a09-765794883524
if the instance of the DHCP4 protocol driver is in the Dhcp4Bound
status that is DHCP configuration has completed, so the Dhcp4->Start
FUNC in the EfiPxcBcDhcp() will return EFI_ALREADY_STARTED status
which lead to EfiPxeBcDhcp FUNC not in correspondence with UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
[lersek@redhat.com: updated copyright year as Siyuan asked]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18050 6f19259b-4bc3-4df7-8a09-765794883524
Fix git 59a8cfd4 (SVN r17869) removes DHCP4.TransmitReceive()and DORA
process dependency, but it updated TransmitReceive() to take the ownership
of DhcpSb->ActiveChild but never release it. This will break the retransmit
and lease time out counter of DORA.
To fix that, TransmitReceive() doesn't need to be the ActiveChild, and the
timer routine should be updated to handle the TransmitReceive specially.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18048 6f19259b-4bc3-4df7-8a09-765794883524
This driver is soon going to be built by ArmVirtPkg/ArmVirtQemu.dsc
(without any changes). Although VALID_ARCHITECTURES is not used by the
build system (it is just a comment), it is best kept up-to-date for human
readers' sake.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Elvin Li <elvin.li@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18041 6f19259b-4bc3-4df7-8a09-765794883524
1. Get default terminal type from PCD rather than using PCANSI
directly in BuildTeminalDevpath;
2. Only terminal type is needed to create an TerminalDev instance, so
remove the useless code of creating and freeing DefaultNode.
3. Some white space refining.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18027 6f19259b-4bc3-4df7-8a09-765794883524
This is bug fix for TerminalDxe: NullRemaining should be set to FALSE
by fault and then be set to TRUE conditionally.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18026 6f19259b-4bc3-4df7-8a09-765794883524
Liming Gao
Feng Tian
Fu Siyuan
Star Zeng
Hao Wu
Giri P Mudusuru
Dandan Bi
Jiaxin Wu
Sunny Wang
Cinnamon Shia
Jordan Justen
Gary Lin
Ruiyu Ni
Zhang Lubo
Tapan Shah
Fu, Siyuan
Zenith432
Heyi Guo
Jiewen Yao
Samer El-Haj-Mahmoud
Alcantara, Paulo
Cecil Sheng
Laszlo Ersek
Derek Lin
Samer El-Haj-Mahmoud
Ard Biesheuvel
Ni, Ruiyu
Eric Dong
Qiu Shumin
Andrew Fish
Eugene Cohen
Samer El-Haj-Mahmoud
fanwang2
Michael D Kinney