In case a virtio serial device is found in the system register the first
console port as EFI console, by updating ConIn, ConOut and ErrOut.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
IsVirtioPciRng() becomes just a thin wrapper for IsVirtioPci().
This allows to add similar thin wrappers for other virtio
devices in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
IsVirtioRng() becomes just a thin wrapper for IsVirtio().
This allows to add similar thin wrappers for other virtio
devices in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Map the code flash with read-only attributes so we can execute from it
even under a memory protection regime that enables WXN, making all
writable memory regions non-executable by default.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The kvmtool option '--flash <flash filename>' is used to launch
a guests VM with a CFI flash device that maps the flash file
specified at the command line.
However, kvmtool allows guest VMs to be launched without a CFI
flash device. In such scenarios the firmware can utilize the
emulated variable storage for UEFI variables. To support this
the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable
must be set to TRUE.
Therefore, update the NorFlashKvmtoolLib to fallback to variable
emulation if a CFI device is not detected. Also improve the error
logging.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
ArmVirtPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The IdMap.S asm source file has not executable content, but its lack of
a BTI annotation prevents the linker from marking any executables it
emits as BTI compatible if this object is part of the build. So add the
BTI note by hand.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The Rtc library for the kvmtool guest firmware configures the
RTC controller address range as runtime memory by calling the
gDS->SetMemorySpaceAttributes().
The SetMemorySpaceAttributes() function has a dependency on
the CPU Arch Protocol. If the CPU Arch Protocol is not
installed the call to set the memory attributes fails with
error code EFI_NOT_AVAILABLE_YET.
Therefore, set the library dependency on the CPU Arch protocol.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
When scanning for the Serial Port in the device
tree, the length and value parameters to ScanMem8()
are not in the right order. This results in the
serial port not being detected if the chosen node
in the device tree has additional elements.
Therefore, pass the parameters to ScanMem8() in the
correct order to fix this issue.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The initial ID map used by ArmVirtQemu only covers 2 MiB of NOR flash,
while the NOOPT build can be up to 3 MiB in size, resulting in a crash
if the unmapped 1 MiB is accessed before the real page tables are up.
So increate the initial flash mapping to 4 MiB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The early ID map used by ArmVirtQemu uses ASID scoped non-global
mappings, as this allows us to switch to the permanent ID map seamlessly
without the need for explicit TLB maintenance.
However, this triggers a known erratum on ThunderX, which does not
tolerate non-global mappings that are executable at EL1, as this appears
to result in I-cache corruption. (Linux disables the KPTI based Meltdown
mitigation on ThunderX for the same reason)
So work around this, by detecting the CPU implementor and part number,
and proceeding without the early ID map if a ThunderX CPU is detected.
Note that this requires the C code to be built with strict alignment
again, as we may end up executing it with the MMU and caches off.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Now that we build the early code without strict alignment and without
suppressing the use of SIMD registers, ensure that the VFP unit is on
before entering C code.
While at it, simplyify the mov_i macro, which is only used for 32-bit
quantities.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: dann frazier <dann.frazier@canonical.com>
Migrate to the virt specific NOR flash driver as the ArmPlatformPkg is
going away.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Switch to the virt specific NorFlashDxe driver implementation that was
added recently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Due to the way we inherited the formerly fixed PCDs to describe the
system memory base and size from ArmPlatformPkg, we ended up with a
MemoryInit PEIM that relies on dynamic PCDs to communicate the size of
system memory between the constructor of one of its library dependencies
and the core module. This is unnecessary, and forces us to incorporate
the PCD PEIM as well, for no good reason. So instead, let's use a HOB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To substantially reduce the amount of processing that takes place with
the MMU and caches off, implement a version of ArmPlatformLib specific
for QEMU/mach-virt in AArch64 mode that carries a statically allocated
and populated ID map that covers the NOR flash and device region, and
128 MiB of DRAM at the base of memory (0x4000_0000).
Note that 128 MiB has always been the minimum amount of DRAM we support
for this configuration, and the existing code already ASSERT()s in DEBUG
mode when booting with less.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Memory layout in CLoud Hypervisor for arm is changed and is different
with Qemu, thus we should build its own PeiMemInfoLib.
The main change in the memory layout is that normal ram may not contiguous
under 4G. The top 64M under 4G is reserved for 32bit device.
What this patch does:
1. get all of the memory node from DT;
2. Init page table for each memory node;
3. Add all of the memory nodes to Hob;
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.muajwar@arm.com>
Alex reports that the cache invalidation performed by
ArmVirtMemoryInitPeiLib takes a non-negligible amount of time at boot.
This cache invalidation used to be necessary to avoid inconsistencies
between the CPU's cached and uncached views of the permanent PEI memory
region, given that the PEI phase is where the MMU gets enabled.
The only allocations done from permanent PEI memory with the MMU off are
pages used for page tables, and since commit 748fea6279
("ArmPkg/ArmMmuLib AARCH64: invalidate page tables before populating
them"), each of those is invalidated in the caches explicitly, for
reasons described in the patch's commit log. All other allocations done
in PEI are either from temporary PEI memory, which includes the stack,
or from permanent PEI memory but after the MMU has been enabled.
This means that the cache invalidation in ArmVirtMemoryInitPeiLib is no
longer necessary, and can simply be dropped.
Reported-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg.
RISC-V Virt platform can leverage the same library to access PCI Express
registers through PCI Express base address set in PcdPciExpressBaseAddress
and cached in a global variable.
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmVirtPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Relocate FdtPciHostBridgeLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs. Also use
PcdPciMmio32Translation and PcdPciMmio64Translation
PCDs provided by MdePkg instead of ArmPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate QemuFwCfgLib to OvmfPkg/Library/QemuFwCfgLib and rename
it to QemuFwCfgLibMmio, this library is leverage by both ARM and
RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate PciPcdProducerLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs.
Add OvmfPkg/Fdt maintainers in Maintainers.txt
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
PcdPciIoTranslation PCD is relocated to MdePkg and leveraged by
both ARM and RISC-V arch. This patch removes the one from ArmPkg
and address the corresponding changes required for other modules
under ArmVirtPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This is one of the series patches to restructure the location of modules under
ArmVirtPkg for RiscVVirtPkg. RiscVVirtPkg leverage FDT Client protocol to
parse FDT nodes.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Disable the TPM2 platform hierarchy by directly calling
ConfigureTpmPlatformHierarchy().
Per the TCG firmware specification "TCG PC Client Platform Firmware Profile
Specification" the TPM 2 platform hierarchy needs to be disabled or a
random password set and discarded before the firmware passes control to the
next stage bootloader or kernel.
Current specs are here:
https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClient_PFP_r1p05_v23_pub.pdf
Section 11 states:
"Platform Firmware MUST protect access to the Platform Hierarchy
and prevent access to the platform hierarchy by non-manufacturer-
controlled components."
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3510
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
We just added the same functionality to the OvmfPkg. However, on x86, we
could use the notification mechanism around
gEfiDxeSmmReadyToLockProtocolGuid to indirectly invoke
ConfigureTpmPlatformHierarchy(). Since ARM does not have an SMM mode, we
have to use direct invocation of this function at the same place in
PlatformBootManagerBeforeConsole() as it is called on x86.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3510
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
PCIe support has been added to Kvmtool Virtual Machine Manager.
The PCI host bridge utility lib is used to retrieve information
about the Root Bridges in a platform.
Therefore, add an instance of PciHostBridgeUtilityLib as this is
required to enable PCIe support for Kvmtool firmware.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
In order to take advantages of extra pci root buses in ArmVirtPkg, it is
necessary to scan extra root buses when getting root briges. And now
PciHostBridgeUtilityLib already provides a set of utility functions that
support for extra pci root buses, like PciHostBridgeUtilityGetRootBridges()
/ PciHostBridgeUtilityFreeRootBridges(). So let's rebase
ArmVirtPkg/FdtPciHostBridgeLib to PciHostBridgeUtilityGetRootBridges() /
PciHostBridgeUtilityFreeRootBridges() to extend ArmVirtPkg with extra
pci root buses support.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20210119011302.10908-11-cenjiahui@huawei.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The PlatformPeim() in the PlatformPeiLib is invoked
by the PrePiMain() and provides the platform an
opportunity to setup the plaform specific HOBs.
This PlatfromPeiLib initialises the Kvmtool platform
HOBs like the Fdt, 16550BaseAddress, etc.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The BaseSerialPort16550 library invokes the
PlatformHookSerialPortInitialize() implemented as
part of the PlatformHook library, to perform platform
specific initialization required to enable use of the
16550 device. The BaseSerialPort16550 library uses
the PcdSerialRegisterBase to obtain the base address
of the UART for MMIO operations.
Some VMMs like Kvmtool provide the base address of
the console serial port in the platform device tree.
This patch introduces two instances of the Platform
Hook library:
1. EarlyFdt16550SerialPortHookLib - parses the
platform device tree to extract the base
address of the 16550 UART and update the PCD
PcdSerialRegisterBase.
2. Fdt16550SerialPortHookLib - reads the GUID
Hob gEarly16550UartBaseAddressGuid (that caches
the base address of the 16550 UART discovered
during early stages) and updates the PCD
PcdSerialRegisterBase.
Note:
a. The PCD PcdSerialRegisterBase is configured
as PatchableInModule.
b. A separate patch introduces a PlatformPeiLib
that trampolines the 16550 UART base address
from the Pcd PcdSerialRegisterBase to the
GUID Hob gEarly16550UartBaseAddressGuid.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool places the base address of the CFI flash in
the device tree it passes to UEFI. This library
parses the kvmtool device tree to read the CFI base
address and initialise the PCDs use by the NOR flash
driver and the variable storage.
UEFI takes ownership of the CFI flash hardware, and
exposes its functionality through the UEFI Runtime
Variable Service. Therefore, disable the device tree
node for the CFI flash used for storing the UEFI
variables, to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Kvmtool is a virtual machine manager that enables
hosting KVM guests. Kvmtool allows to vary the
hardware configuration of the virtual platform
it provides to the guest partition. It provides
the current hardware configuration to the firmware
by handing off a device tree containing the hardware
information.
This library parses the kvmtool provided device
tree and populates the system memory map for the
kvmtool virtual platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Add library that parses the Kvmtool device tree and updates
the dynamic PCDs describing the RTC Memory map.
It also maps the MMIO region used by the RTC as runtime memory
so that the RTC registers are accessible post ExitBootServices.
Since UEFI takes ownership of the RTC hardware disable the RTC
node in the DT to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Our UEFI guest firmware takes ownership of the emulated NOR flash in
order to support the variable runtime services, and it does not expect
the OS to interfere with the underlying storage directly. So disable
the NOR flash DT nodes as we discover them, in a way similar to how we
disable the PL031 RTC in the device tree when we attach our RTC runtime
driver to it.
Note that this also hides the NOR flash bank that carries the UEFI
executable code, but this is not intended to be updatable from inside
the guest anyway, and if it was, we should use capsule update to do so.
Also, the first -pflash argument that defines the backing for this flash
bank is often issued with the 'readonly' modifier, in order to prevent
any changes whatsoever to be made to the executable firmware image by
the guest.
This issue has become relevant due to the following Linux changes,
which enable the flash driver stack for default build configurations
targetting arm64 and 32-bit ARM.
ce693fc2a877
("arm64: defconfig: Enable flash device drivers for QorIQ boards", 2020-03-16).
5f068190cc10
("ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH", 2019-04-03)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
We don't distribute UEFI_DRIVER modules stand-alone that were built as
part of an ArmVirtQemu* platform. ArmVirtQemu* UEFI_DRIVERs are allowed to
inherit platform dependencies.
By enabling UEFI_DRIVERs to consume QemuFwCfgLib, we can hook fw_cfg-based
NULL class libraries into UEFI drivers, e.g. in order to set dynamic PCDs.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Older GCC (<= 4.9) fail to infer that Parent is never used unless it
has been assigned before, and may throw an error like
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:
In function ‘PlatformPeim’:
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:132:24:
error: ‘Parent’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
RangesProp = fdt_getprop (Base, Parent, "ranges", &RangesLen);
Set Parent to 0 at the start of the sequence to work around this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2601
Fixes: 82662a3b5f ("ArmVirtPkg/PlatformPeiLib: discover the TPM base ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtGicArchLib was originally implemented before virtualization
emulation was implemented in QEMU, and the GICv2 model implemented only
the physical copy of control registers.
Enabling virtualization emulation to QEMU adds also the virtual copy,
doubling the RegSize returned by FindCompatibleNodeReg () in
ArmVirtGicArchLibConstructor (). This triggered an ASSERT when running
QEMU with -M virt,virtualization=on. Address this by testing for both
possible valid values of RegSize.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2588
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the QEMU loader file system implementation inside this library,
and switch to the separate QemuLoadImageLib library and the associated
driver to expose the kernel and initrd passed via the QEMU command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Implement a ArmVirtPkg specific version of the PSCI ResetSystemLib that
is usable in the PEI phase, as the existing one relies on the FDT client
protocol, making it unsuitable.
Note that accessing the device tree passed by QEMU via its initial base
address is guaranteed to be safe at any time during the PEI phase, so we
can defer discovery of the PSCI method until the time the reset library
is actually invoked (which is rarely)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Introduce a boolean PCD that tells us whether TPM support is enabled
in the build, and if it is, record the TPM base address in the existing
routine that traverses the device tree in the platform PEIM.
If a TPM is found, install the gOvmfTpmDiscoveredPpiGuid signalling PPI
that will unlock the dispatch of OvmfPkg's Tcg2ConfigPei. If TPM2
support is enabled in the build but no TPM2 device is found, install the
gPeiTpmInitializationDonePpiGuid PPI, which is normally installed by
Tcg2ConfigPei if no TPM2 is found, but in our case Tcg2ConfigPei will
never run so let's do it here instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We currently include PcdLib.h in PlatformPeiLib, without declaring
this dependency in its .INF description. Since all the PCDs we use
resolve to fixed type in practice, this does not really matter at
the moment, but since we will be adding dynamic PCD references in
a subsequent patch, let's make the PcdLib dependency explicit, so
that its dispatch is guaranteed to be ordered correctly with respect
to the provider of the dynamic PCD PPI.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Gerd Hoffmann
Ard Biesheuvel
Sami Mujawar
Rebecca Cran
Jianyong Wu
Pierre Gondois
Abner Chang
Michael Kubacki
Michael D Kinney
Stefan Berger
Jiahui Cen via groups.io
Ard Biesheuvel
Laszlo Ersek
Ard Biesheuvel
Leif Lindholm