1. Client must ignore any Advertise message that includes a Status Code option containing the value NoAddrsAvail.
2. The elapsed-time should start from the current DHCP transaction.
3. Client should not change any information about addresses the client has recorded in the IA but not included in the IA from the server.
4. Client need to update to handle the error status code UnspecFail/UseMulticast/NotOnLink/NoBinding in the Reply message from server.
5. When the client receives a Reply message in response to a Renew/ Rebind message, the client examines each IA independently. For each IA in the original Renew/ Rebind message, the client sends a Renew/ Rebind if the IA is not in the Reply message.
6. Client should uses network byte order in IANA T1/T2 option
7. Client should discard any addresses for which the preferred lifetime is greater than the valid lifetime.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14039 6f19259b-4bc3-4df7-8a09-765794883524
2. When no DELETED variable found, no variable space could be reclaimed, so just give some debug info and return EFI_SUCCESS.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14029 6f19259b-4bc3-4df7-8a09-765794883524
1. PciCfg Read/Write doesn't support UINT64 width.
2. PciCfg2 Segment must be zero.
Move CheckParameters () to BootScriptSave.c to check parameter early.
Add code for EfiSmbusBWBRProcessCall operation, and let the SmbusLib instance to decide if it is supported or not.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14018 6f19259b-4bc3-4df7-8a09-765794883524
SysCalls.c: Add IGNSPEC to the "sane" termios settings so that, by default, function keys and other special keys are ignored.
fvwrite.c:
Line 109: Change test to less-than zero since zero is a valid value.
Line 113: Change test to greater-than zero since we only want to loop when there are characters available.
Line 114: Force uio_resid to zero since it might have become negative on line 113.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: erik.c.bjorge@intel.com
Reviewed-by: lee.g.rosenbaum@intel.com
Reviewed-by: jaben.carsey@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14013 6f19259b-4bc3-4df7-8a09-765794883524
Move these states from the DSDT to the SSDT. Override the default
configuration if the host has the following qemu commit:
commit 459ae5ea5ad682c2b3220beb244d4102c1a4e332
Author: Gleb Natapov <gleb@redhat.com>
Date: Mon Jun 4 14:31:55 2012 +0300
Add PIIX4 properties to control PM system states.
This patch adds two things. First it allows QEMU to distinguish
between regular powerdown and S4 powerdown. Later separate QMP
notification will be added for S4 powerdown. Second it allows
S3/S4 states to be disabled from QEMU command line. Some guests
known to be broken with regards to power management, but allow to
use it anyway. Using new properties management will be able to
disable S3/S4 for such guests.
Supported system state are passed to a firmware using new fw_cfg
file. The file contains 6 byte array. Each byte represents one
system state. If byte at offset X has its MSB set it means that
system state X is supported and to enter it guest should use the
value from lowest 3 bits.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14003 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI 5.0 specification says:
7.3.4.4 System \_S3 State
[...]
* Dynamic RAM context is maintained.
[...]
This corresponds to the following in the PIIX4 spec:
PMCNTRL -- POWER MANAGEMENT CONTROL REGISTER (IO)
[...]
Bits[12:10] Suspend Type
[...]
001 STR (Suspend To RAM)
Also, this (ie. decimal 1) is the suspend type value that qemu recognizes
as an S3 (suspend to ram) request.
Only the value for PM1a_CNT.SLP_TYP is set (PM1b_CNT.SLP_TYP is left at
zero), since in OVMF we don't report the optional PM1b_EVT_BLK register
block to OSPM. (PM1b_EVT_BLK is defined as 0 in "Platform.h"; see "4.8.1.1
PM1 Event Registers" in the ACPI 5.0 specification.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14002 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI 5.0 specification says:
7.3.4.5 System \_S4 State
[...]
* DRAM context is not maintained.
[...]
This corresponds to the following in the PIIX4 spec:
PMCNTRL -- POWER MANAGEMENT CONTROL REGISTER (IO)
[...]
Bits[12:10] Suspend Type
[...]
010 POSCL (Powered On Suspend, Context Lost)
Also, this (ie. decimal 2) is the default suspend type value that qemu
recognizes as an S4 (suspend to disk) request.
Only the value for PM1a_CNT.SLP_TYP is corrected (PM1b_CNT.SLP_TYP is left
at zero), since in OVMF we don't report the optional PM1b_EVT_BLK register
block to OSPM. (PM1b_EVT_BLK is defined as 0 in "Platform.h"; see "4.8.1.1
PM1 Event Registers" in the ACPI 5.0 specification.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14001 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
Adds a subset of the terminal I/O capabilities described in the Single Unix Specification, V4.
Supports:
Erase previous character. Default is Backspace or ^H
Erase line. Default is ^U
TAB characters are supported and, by default, are rendered as 8 spaces. They will still be read as a single TAB character.
Both Canonical and Non-Canonical modes are supported.
If a terminal device is opened with O_TTY_INIT in the mode, the device will be initialized to "sane" values for interactive use. It will be in Canonical mode, Enter will be translated to NewLine and on output, a NewLine is translated to CRLF. Echoing will be on, control characters are output as ^X, and TABs are expanded.
See the new <sys/termios.h> file for more information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: erik.c.bjorge@intel.com
Reviewed-by: leroy.p.leahy@intel.com
Reviewed-by: lee.g.rosenbaum@intel.com
Reviewed-by: jaben.carsey@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13989 6f19259b-4bc3-4df7-8a09-765794883524
2. To be consistent, update PciCfgRead to support full S3BootScriptWidth(Uint8, FifoUint8 and FullUint8) like PciCfgWrite.
3. Use BuildLoopData() to get the addressStride and BufferStride to do PCI CFG operations.
4. Correct, refine and enhance some comments and debug messages.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13987 6f19259b-4bc3-4df7-8a09-765794883524
2. Sync the change into LockBox for S3BootScriptMoveLastOpcode() at runtime in SMM.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13986 6f19259b-4bc3-4df7-8a09-765794883524
sfu5
lzeng14
li-elvin
ydong10
erictian
lgao4
andrewfish
darylm503
jcarsey
jyao1
jljusten