Currently, the flag "-fpie" is passed for all builds with a GCC
family toolchain, including CLANGPDB. CLANGPDB however does not
support this flag as it generates PE/COFF files directly.
As the flag is mostly required for ARM-specific self-relocation, drop
it for other architectures and document the limitation to enable e.g.
X64 CLANGPDB builds of StandaloneMmCore.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Acked-by: Shi Steven <steven.shi@intel.com>
This change allows to build StandaloneMmPkg components for 32bit Arm
StandaloneMm firmware.
This change mainly moves AArch64/ source files to Arm/ side directory
for several components: StandaloneMmCpu, StandaloneMmCoreEntryPoint
and StandaloneMmMemLib. The source file is built for both 32b and 64b
Arm targets.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Use intermediate (UINTN) cast when casting int from/to pointer. This
is needed as UINT64 values cast from/to 32bit pointer for 32bit
architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for reporting completion of a MM request using either the
Firmware Framework(FF-A) ABI transport or through the earlier used SVC
calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
With the introduction of Firmware Framework(FF-A), a Secure Partition
can get the SPM version either using FF-A calls or through the
existing svc calls. Use a runtime check to use either of the two
methods based on the Pcd feature flag value.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Co-developed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Declare module wide variables for SPM major and minor versions to be
used in checking the SPM version compatibility. Use the SPM major and
minor version macros declared in the previous patch for the version
check.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add the Firmware Framework(FF-A) header in the StandaloneMm entry
point driver. Support for invoking the functions through FF-A will be
added in a subsequent patch.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
This change extends StandaloneMmCoreEntryPoint library to support X64
architecture.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
The ECC tool reports error [8005] Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
for the constants SPM_MAJOR_VER, SPM_MINOR_VER & BOOT_PAYLOAD_VERSION.
Fix this by changing converting these constant variables to #defined
values.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
Fix the ECC reported error "[9003] The first line of text in a comment
block should be a brief description of the element being documented and
the brief description must end with a period. Comment description should
end with period '.'".
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
Fix the ECC reported error "[9002] The function headers should follow
Doxygen special documentation blocks in section 2.3.5 in Comment".
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
Fix ECC error "[5007] There should be no initialization of a variable
as part of its declaration Variable."
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Apply PE/COFF fixups when starting up the standalone MM core, so that
it can execute at any address regardless of the link time address.
Note that this requires the PE/COFF image to be emitted with its
relocation section preserved. Special care is taken to ensure that
TE images are dealt with correctly as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The standalone MM core runs in a restricted environment that is set
up by a higher privilege level, and which may not allow memory regions
to be writable and executable at the same time.
This means that making the StMM core self-relocatable requires that
all the targets of the relocation fixups are outside of the executable
region of the image, given that we cannot remap the executable code
writable from the executable code itself without losing those execute
permissions.
So instead, use the existing toolchain support to ensure that position
independent code is used where possible, and that all the remaining
relocated quantities are emitted into the data section. (Note that
staticallly initialized const pointers will be emitted into the
.data.rel.ro section, which gets pulled into the .data section by
our linker script)
To ensure that we don't pick up any absolute references in executable
code inadvertently (e.g., in assembler code), add the '-z text' linker
option which will force the build to fail in this case.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Sending DEBUG output to the serial port should only be done via
DebugLib calls, which is in charge of initializing the serial
port when appropriate. So drop the explicit SerialPortInitialize ()
invocation, and rely on normal constructor ordering to get the
serial port into the appropriate state at the right time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
TE images take up less space when using 4 KB section alignment, since
the FFS/FV generation code optimizes away the redundant, nested padding.
This saves 4 KB of space, which is a worthwhile improvement for code
that executes in place in secure context.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
ASSERT_EFI_ERROR (x) is a shorthand for ASSERT(!EFI_ERROR(x)), and so
it should only be used with EFI_STATUS type expressions.
So drop two instances that operate on other types, since neither looks
particularly useful.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The MMU functions needed for StandaloneMM image are now exported
through a separate library class. Make the corresponding change in the
core's entry point inf file so that it references the correct library
class for modifying the MMU attributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Introduction of the -mstrict-align flag results in GCC attempting
to use memset to zero out the InitMmFoundationSvcArgs structure.
In the absence of this C library function, this patch explicitly
zeroes this data structure prior to use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms and is initialised during the SEC phase. ARM Trusted firmware
in EL3 is responsible for initialising the architectural context for
S-EL0 and loading the Standalone MM image. The memory allocated to this
image is marked as RO+X. Heap memory is marked as RW+XN.
Certain actions have to be completed prior to executing the generic code
in the Standalone MM Core module. These are:
1. Memory permission attributes for each section of the Standalone MM
Core module need to be changed prior to accessing any RW data.
2. A Hob list has to be created with information that allows the MM
environment to initialise and dispatch drivers.
Furthermore, this module is responsible for handing over runtime MM
events to the Standalone MM CPU driver and returning control to ARM
Trusted Firmware upon event completion. Hence it needs to know the CPU
driver entry point.
This patch implements an entry point module that ARM Trusted Firmware
jumps to in S-EL0. It then performs the above actions before calling the
Standalone MM Foundation entry point and handling subsequent MM events.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>