Bugzilla: 3415 (https://bugzilla.tianocore.org/show_bug.cgi?id=3415)
The GICv3 architecture supports up to 1020 ordinary interrupt
lines. The actual number of interrupts supported is described by the
ITLinesNumber field in the GICD_TYPER register. The total number of
implemented registers is normally calculated as
32*(ITLinesNumber+1). However, maximum value (0x1f) is a special case
since that would indicate that 1024 interrupts are implemented.
Add handling for this special case in ArmGicGetMaxNumInterrupts.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Commit a18a9bde36 ("MdeModulePkg/Variable/RuntimeDxe: Restore Variable
Lock Protocol behavior", 2020-12-15), for bug 3111, added two such sets of
debug messages that:
(a) are relevant for developers,
(b) yet should not necessarily poke end-users, because no functionality
suffers in practice.
Both message sets are in function VariableLockRequestToLock(): the first
is a generic interface deprecation warning; the second is the
double-locking situation, which we permit for compatibility (return status
EFI_SUCCESS).
Both message sets should be emitted with the DEBUG_WARN mask, not the most
serious DEBUG_ERROR mask. On some platforms, the serial console carries
both terminal traffic, and grave (DEBUG_ERROR-only) log messages. On such
platforms, both message sets may be perceived as a nuisance by end-users,
as there is nothing they can do, and there's nothing they *should* do --
in practice, nothing malfunctions.
(Such a platform is ArmVirtQemu, built with "-D
DEBUG_PRINT_ERROR_LEVEL=0x80000000".)
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3410
Fixes: a18a9bde36
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210521204037.11980-1-lersek@redhat.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Code mistake, VariableIndex is smaller normally than buffer+buffersize
so should not break loop.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When build.by POSTBUILD handling section returns other than 0, set
ReturnCode to POSTBUILD_ERROR so build.py exits with return code other
than 0.
Fix for https://bugzilla.tianocore.org/show_bug.cgi?id=1977
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
`Result` can be used uninitialized in both functions after following
either first or second `goto` statement.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
If the function gets invalid value for the `ResizableBarOp` parameter
and asserts are disabled, `Bit` can be used uninitialized.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
`Status` can be used uninitialized:
/* Evaluates to FALSE */
if (ShellGetExecutionBreakFlag ()) {
Status = EFI_ABORTED;
break;
}
/* Evaluates to FALSE */
if (!Context->ContentDownloaded && !Context->ResponseToken.Event) {
Status = ...;
ASSERT_EFI_ERROR (Status);
} else {
ResponseMessage.Data.Response = NULL;
}
/* UNINITIALIZED USE */
if (EFI_ERROR (Status)) {
break;
}
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3384
Currently, UefiBootManagerLib has the below assumption:
Assume the BootManagerMenuFile is in the same FV as the module links to this library.
It has some limitation now, so remove the assumption.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
5-level paging can be enabled on CPU which supports up to 52 physical
address size. But when the feature was enabled, the 48 address size
limit was not removed and the 5-level paging testing didn't access
address >= 2^48. So the issue wasn't detected until recently an
address >= 2^48 is accessed.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3395
This patch fixes the issue observed during
BSF file to YAML file conversion. It also
addresses the issue during multibyte array
data conversion check, for example the data
representation of 0xFFFF instead of 0xFF, 0xFF
would be thrown exception "Array size is not
proper" without this patch.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Loo Tung Lun <tung.lun.loo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Some/all platforms are going to require EDK2 to build a device tree and
use it in the early stages of boot.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Abner Chang <abner.chang@hpe.com>
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
Currenly, when using the Brotli tool to compress data, the output
compressed binary file does not record complete compressed data
when size of input file is too large, which makes the data loss and
will trigger decompress-check issue.
The Brotli document mentioned:
The brotli tool use BrotliEncoderCompressStream method to compresses
input stream to output stream. Under some circumstances (e.g. lack of
output stream capacity) the BrotliEncoderOperation would require
several calls to BrotliEncoderCompressStream. The method must be
called again until both input stream is depleted and encoder has no
more output after the method is called.
This patch fixes this issue based on the Brotli document.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Fix various typos throughout MdeModulePkg.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3373
An update to expand the mExceptionNameStr array failed to add a comma
after original last entry, therefore causing the #CP name to have extra
incorrect characters and the remaining entries to be indexed incorrectly
(off by 1).
Add a comma after the "#CP" entry to resolve this issue.
Fixes: 5277540e37
Cc: Allen Wynn <Allen_Wynn@Dell.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <40e55bf6563ed8ea4962a1219efbe1ab77a56cc4.1620919615.git.thomas.lendacky@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
`CreateDirectoryIfCreating` is used only if `PermitCreation` is set.
`NewNodeIsDirectory` might not set in case of error, but that would lead
to leaving the function before invalid use.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3228
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Message-Id: <20210511225616.5942-3-sergei@posteo.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
`Dupes` is used only if `Duplicates != NULL` and function is left if
allocation of memory for `Dupes` fails, so it can't be used
uninitialized.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3228
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Message-Id: <20210511225616.5942-2-sergei@posteo.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add support for the ImageCapsuleSupport field, introduced in version 3
of the EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER structure. This
structure member is used to indicate if the corresponding payload has
support for authentication and dependency.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3385
A VS2012 build fails with a cast conversion warning when the SEV-ES work
area PCD is cast as a pointer to the SEV_ES_AP_JMP_FAR type.
When casting from a PCD value to a pointer, the cast should first be done
to a UINTN and then to the pointer. Update the code to perform a cast to
a UINTN before casting to a pointer to the SEV_ES_AP_JMP_FAR type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Fixes: 7b7508ad78
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c89bc819856d448360430c32cb3833a9667f987b.1620656694.git.thomas.lendacky@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
AARCH64 support has been added to BaseRngLib via the optional
ARMv8.5 FEAT_RNG.
Refactor RngDxe to support AARCH64, note support for it in the
VALID_ARCHITECTURES line of RngDxe.inf and enable it in SecurityPkg.dsc.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Make BaseRngLib more generic by moving x86-specific functionality into
'Rand' and adding files under 'AArch64' to support the optional ARMv8.5
RNG instruction RNDR that is a part of FEAT_RNG.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
If the DSC file provides an override of a Guided tool path
and/or Guided tool GUID value, then make sure the one from the
DSC file is used if it is higher priority than the Guided tool
in the tools_def.txt file. This makes the Guided tool used by
GenFds match the tool listed GuidedSectionTools.txt.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The SCP-firmware has moved to full support for SCMIv2 which means that
the base protocol can be either compliant with SCMI v1 or v2.
Allow any version between SCMI v1.0 and SCMI v2.0 to be compatible
with the current implementation.
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Sample unit tests in UnitTestFrameworkPkg hangs when running in OVMF/QEMU
environment. Build target is X64/GCC5. Fixing this issue by adding EFIAPI
to ReportPrint() function that use VA_ARGS.
Signed-off-by: Getnat Ejigu <getnatejigu@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
* Save/Restore global state in GetToolChainAndFamilyFromDsc()
This resolves an issue where the multi-arch build for
UefiPayloadPkg would skip the autogen and build of IA32
components.
* Expand tools wildcard.
This resolves the issue where autogen makefile contents
would have a BUIDLRULEFAMILY tools definitions with an
'*' in the tool field that breaks the build from invalid
makefile syntax.
* Build rule family higher priority than Family.
This resolves the issue where flags were appended from
both the BUILDRULEFAMILY and FAMILY when only
BUILDRULEFAMILY should be appended when present.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Andrew Fish <afish@apple.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
The OVMF Tcg2Config PEIM adds the gOvmfTpmMmioAccessiblePpiGuid as a
Depex for IA32 and X64 builds so that the MMIO range is properly mapped
as unencrypted for an SEV-ES guest before the Tcg2Config PEIM is loaded.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d6538e6c557173d260e272a0e5659683175e2e06.1619716333.git.thomas.lendacky@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
During PEI, the MMIO range for the TPM is marked as encrypted when running
as an SEV guest. While this isn't an issue for an SEV guest because of
the way the nested page fault is handled, it does result in an SEV-ES
guest terminating because of a mitigation check in the #VC handler to
prevent MMIO to an encrypted address. For an SEV-ES guest, this range
must be marked as unencrypted.
Create a new x86 PEIM for TPM support that will map the TPM MMIO range as
unencrypted when SEV-ES is active. The gOvmfTpmMmioAccessiblePpiGuid PPI
will be unconditionally installed before exiting. The PEIM will exit with
the EFI_ABORTED status so that the PEIM does not stay resident. This new
PEIM will depend on the installation of the permanent PEI RAM, by
PlatformPei, so that in case page table splitting is required during the
clearing of the encryption bit, the new page table(s) will be allocated
from permanent PEI RAM.
Update all OVMF Ia32 and X64 build packages to include this new PEIM.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <42794cec1f9d5bc24cbfb9dcdbe5e281ef259ef5.1619716333.git.thomas.lendacky@amd.com>
[lersek@redhat.com: refresh subject line]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Define a new PPI GUID that is to be used as a signal of when it is safe
to access the TPM MMIO range. This is needed so that, when SEV is active,
the MMIO range can be mapped unencrypted before it is accessed.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <03e292339273721724c8b14605cfe9d7bbe45a71.1619716333.git.thomas.lendacky@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
Enabling TPM support results in guest termination of an SEV-ES guest
because it uses MMIO opcodes that are not currently supported.
Add support for the new MMIO opcodes (0xA0 - 0xA3), MOV instructions which
use a memory offset directly encoded in the instruction. Also, add a DEBUG
statement to identify an unsupported MMIO opcode being used.
Fixes: c45f678a1e
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <2fdde57707b52ae39c49341c9d97053aaff56e4a.1619716333.git.thomas.lendacky@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
The MOVZX and MOVSX instructions use the ModRM byte in the instruction,
but the instruction decoding support was not decoding it. This resulted
in invalid decoding and failing of the MMIO operation. Also, when
performing the zero-extend or sign-extend operation, the memory operation
should be using the size, and not the size enumeration value.
Add the ModRM byte decoding for the MOVZX and MOVSX opcodes and use the
true data size to perform the extend operations. Additionally, add a
DEBUG statement identifying the MMIO address being flagged as encrypted
during the MMIO address validation.
Fixes: c45f678a1e
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <5949d54cb2c9ab69256f67ed5654b32654c0501c.1619716333.git.thomas.lendacky@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
Update BaseTools to support new build targets, new tool chains,
and new architectures declared in DSC file [BuildOptions] sections.
* Do not expand * when tools_def.txt is parsed. Only expand when
both tools_def.txt and DSC [BuilsOptions] sections have been parsed.
This also requires more flexible matching of tool keys that contain *
in tool key fields.
* Pre-scan the platform DSC file for FAMILY and TOOLCHAIN declarations
DSC in [BuildOptions] sections before the FAMILY and TOOLCHAIN need
to be known.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
EmulatorPkg IA32 GCC builds are not working due to a failure
to install the i386 library dependencies in Ubuntu 18.04.
Temporarily disable these specific CI tests until the issue
can be resolved.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add an entry to build the ArmPlatformPkg in the CI.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=3349
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add an entry to build the ArmPkg in the CI.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=3348
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add an entry in the documentation for the LicenseCheck and
EccCheck plugins.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Enable the CI for the ArmPlatformPkg.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Enable the CI for the ArmPkg.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add ArmPlatformPkg.ci.yaml to configure the CI for the
ArmPlatformPkg.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add ArmPkg.ci.yaml to configure the CI for the
ArmPkg.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The 'cspell' CI test detected some small typos in ArmPkg.
Correct them.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add the OemMiscLibNull library to the [Components] section of
ArmPkg.dsc, allowing to complete the 'DscCompleteCheck' CI test.
According to .pytool/Readme about the 'DscCompleteCheck' test:
The test considers it an error if any INF does not appear in the
`Components` section of the package-level DSC.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch documents the libraries advertised in ArmPkg.dec.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some library headers are missing/incorrect in ArmPkg.dec.
This makes the 'LibraryClassCheck' CI test fail. This patch
adds/corrects them.
According to .pytool/Readme about the 'LibraryClassCheck' test:
This test scans at all library header files found in the
`Library` folders in all of the package's declared include
directories and ensures that all files have a matching
LibraryClass declaration in the DEC file for the package.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=3254
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=3258
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
The #ifndef at the start of an include file should have
one postfix underscore, and no prefix underscore character
Some include guards have been modified to match the name of the
header file. Some comments have also been added on the closing
'#endif'.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
'Manufacturer' was spelled wrongly in a comment in
MiscChassisManufacturerData.c.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The calculation of the chassis SKU number field was being calculated
incorrectly, forgetting that there's one element already present in
the structure.
Fix the calculation and improve code readability by introducing a
SkuNumberField variable.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Add a new function to OemMiscLib to allow platforms to report their boot
status into the Type32 SMBIOS table.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Andreas Sandberg
Laszlo Ersek
Li, Walon
Garrett Kirkendall
Sergei Dmitrouk
Zhiguang Liu
Ray Ni
Loo, Tung Lun
Daniel Schaefer
Chen, Christine
Rebecca Cran
Lendacky, Thomas
Sachin Agrawal
Sughosh Ganu
Michael D Kinney
Nicola Mazzucato
Getnat Ejigu
Pierre Gondois