Print 'SubtypeGuid' field from the EFI_FREEFORM_SUBTYPE_GUID_SECTION
structure.
This value describes the raw data inside the section.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
Currently there is no labels for start and end of the
EFI_SECTION_FIRMWARE_VOLUME_IMAGE type section. Therefore it is not
possible to see where the FV section ends and another section starts.
Add labels for start and end of the FV sections to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently there is no labels for start and end of the encapsulation
sections. Therefore it is not possible to see where the encapsulation
section ends and another section starts.
Add labels for start and end of encapsulation sections to fix the
issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3928
Windows-based system using signtool.exe to sign the capsule.
Add the support to using "--subject-name" argument to assign
the subject name used to sign the capsule file.
This argument would pass to signtool.exe as a part of input
argument with "/n" flag.
NOTE: If using signtool.exe to sign capsule at least need to
choose one of "--pfx-file" and "--subject-name"
argument to input the value.
Signed-off-by: Jason1 Lin <jason1.lin@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
- Correct typo in print statement,
- "BuildNumber" field is UINT16, therefore it needs "0x%04X" format
modifier,
- "VersionString" field is CHAR16, therefore the input data should be
processed to be displayed with "%s" printf modifier.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently sections with unknown types are displayed as
`EFI_SECTION_SMM_DEPEX` which is wrong.
Increase the highest value for the section type to 0x1C
for correct parsing.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Alignment attribute is not a bitmask, therefore we need to compare
field value with all alignment defines.
Remove duplicate print statements. Unify indent with other attribute
print statements.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This patch is a bug fix about FeatureFlagExpression in INF file:
INF [Source] section now unconditionally use Pcd default value in DEC
when handling FeatureFlagExpression, it is wrong.
If a Pcd value has been set in the DSC file, we should use latest
value in DSC instead of default value.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3965
Currently DSC LibraryClass precedence rule is not align with DSC Spec.
The expectation rule should be:
[LibraryClasses.$(ARCH)] < [LibraryClasses.Common.$(MODULE_TYPE)]
The actual behavior is:
[LibraryClasses.$(ARCH)] > [LibraryClasses.Common.$(MODULE_TYPE)]
This patch fixes the issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Long1 Huang <long1.huang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently BaseTools use 'cp' command for PcdValueInit and GenMake
process, as the command can not keep the time info of the source
file, which will cause incremental build issue in Linux system,
thus the '-p' need be added to keep the source file's attributes
in copy process.
This patch fixes this issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The python BaseTools/Edk2ToolsBuild.py creates files in
BaseTools/BaseToolsBuild and should be ignored.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Build-rules.txt lists .cc and .cpp as supported file extensions.
BaseTools commit 05217d210e introduce a regression issue that
ignore the .cc and .cpp file type.
This patch is to fix this bug.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
When a module "Module" depends on a library instance "Lib1" which
depends on "Lib2" which depends on "Lib3" ... depends on "LibN",
but "LibN" doesn't support the type (e.g.: SEC) of the "Module", the
following error messages are printed by build tool:
<DSC path>(...): error 1001: Module by library instance [<LibN path>]
consumed by [<Module path>]
But it's unclear to user how LibN is consumed by the Module.
With the patch, following errors are printed:
<DSC path>(...): error 1001: Module by library instance [<LibN path>]
consumed by library instance [<Lib N-1 path>] which is
consumed by module[<Module path>]
It doesn't print all the intermediate library instances between the
Module and LibN but at least the path of Lib N-1 can help users
to help how to fix the build errors.
I hope this patch can be a trigger point that a better solution could
be developed by tool experts to print all the library instances
between the Module and LibN.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.fen@intel.com>
This reverts commit ff36b2550f.
Has no effect because GCC_IA32_CC_FLAGS and GCC_X64_CC_FLAGS are unused.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The ebp/rbp register can either be used for the frame pointer or
as general purpose register. With gcc (and clang) this depends
on the -f(no-)omit-frame-pointer switch.
This patch updates tools_def.template to explicitly set the compiler
option and also add a define to allow conditionally compile code.
The new define is used to fix stack switching in TemporaryRamMigration.
The ebp/rbp must not be touched when the compiler can use it as general
purpose register. With version 12 gcc starts actually using the
register, so changing it leads to firmware crashes in some
configurations.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3934
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The generated Makefile was missing a dependency. This resulted in a
build-time race condition if the recursive make is multi-threaded and
shares job control.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The FMMT python tool is used for firmware files operation, which has
the Fv/FFs-based 'View'&'Add'&'Delete'&'Replace' operation function:
1.Parse a FD(Firmware Device) / FV(Firmware Volume) / FFS(Firmware Files)
2.Add a new FFS into a FV file (both included in a FD file or not)
3.Replace an FFS in a FV file with a new FFS file
4.Delete an FFS in a FV file (both included in a FD file or not)
5.Extract the FFS from a FV file (both included in a FD file or not)
This version of FMMT Python tool does not support PEIM rebase feature,
this feature will be added in future update.
Currently the FMMT C tool is saved in edk2-staging repo, but its
quality and coding style can't meet the Edk2 quality, which is hard to
maintain (Hard/Duplicate Code; Regression bugs; Restrict usage).
The new Python version keeps same functions with origin C version. It
has higher quality and better coding style, and it is much easier to
extend new functions and to maintain.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1847
RFC Link: https://edk2.groups.io/g/devel/message/82877
Staging Link: https://github.com/tianocore/edk2-staging/tree/PyFMMT
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
In the Dynamic-Library-File template, add missing output file
declarations. These files are generated by the template and other rules
explicitly depend on them.
This change resolves missing dependency issues we encountered while
running a recursive make with job control.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3828
This is a bugfix of
bf9230a9f3.
1.In the current code, gPlatformFinalPcd will save all PCDs used at
whole compile process, which wastes runtime memory and is unnecessary.
This patch makes gPlatformFinalPcd save only the PCDes which are
assigned in the DSC file, and the PCD that has not been assigned will
use the default value in DEC.
2.During the compilation process, gPlatformFinalPcd may be lost, and
the current code cannot selectively assign PCD in DSC by specifying ARCH.
This patch moves gPlatformFinalPcd into datapipe and modifies the
assignment logicto fix this.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: yi1 li <yi1.li@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3500
Use efi_debugging.py Python Classes to implement EFI gdb commands:
efi_symbols, guid, table, hob, and devicepath
You can attach to any standard gdb or kdp remote server and get EFI
symbols. No modifications of EFI are required.
Example usage:
OvmfPkg/build.sh qemu -gdb tcp::9000
lldb -o "gdb-remote localhost:9000" -o "command script import efi_lldb.py"
Note you may also have to teach lldb about QEMU:
-o "settings set plugin.process.gdb-remote.target-definition-file
x86_64_target_definition.py"
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
https://bugzilla.tianocore.org/show_bug.cgi?id=3500
Use efi_debugging.py Python Classes to implement EFI gdb commands:
(gdb) help efi
Commands for debugging EFI. efi <cmd>
List of efi subcommands:
efi devicepath -- Display an EFI device path.
efi guid -- Display info about EFI GUID's.
efi hob -- Dump EFI HOBs. Type 'hob -h' for more info.
efi symbols -- Load Symbols for EFI. Type 'efi_symbols -h' for more info.
efi table -- Dump EFI System Tables. Type 'table -h' for more info.
This module is coded against a generic gdb remote serial stub. It should
work with QEMU, JTAG debugger, or a generic EFI gdb remote serial stub.
No modifications of EFI is required to load symbols.
Example usage:
OvmfPkg/build.sh qemu -gdb tcp::9000
gdb -ex "target remote localhost:9000" -ex "source efi_gdb.py"
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Updates to the latest release 11.2-2022.02. The previous download
page (version 10.3-2021.07) has been marked deprecated.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3872
When doing ecc inf version check, the decimal type version number
like 1.27 is treated as invalid version.
So the code should be updated to support decimal type version number.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In function ?SetDevicePathEndNode?,
inlined from ?FileDevicePath? at DevicePathUtilities.c:857:5:
DevicePathUtilities.c:321:3: error: writing 4 bytes into a region of size 1 [-Werror=stringop-overflow=]
321 | memcpy (Node, &mUefiDevicePathLibEndDevicePath, sizeof (mUefiDevicePathLibEndDevicePath));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from UefiDevicePathLib.h:22,
from DevicePathUtilities.c:16:
../Include/Protocol/DevicePath.h: In function ?FileDevicePath?:
../Include/Protocol/DevicePath.h:51:9: note: destination object ?Type? of size 1
51 | UINT8 Type; ///< 0x01 Hardware Device Path.
| ^~~~
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Sdk/C/LzmaEnc.c: In function ?LzmaEnc_CodeOneMemBlock?:
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*p.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*(CLzmaEnc *)pp.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
cc1: all warnings being treated as errors
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
For the multiple SKU case, basetools generates multiple redundant
__FLEXIBLE_SIZE statement that is from the same line in dsc file.
This behavior causes the generated PcdValueInit.c file to have huge size,
and the compilation time is very long.
This patch is going to fix this issue.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3828
FeatureFlagExpression Support in Source section of INF file. The Pcd
value in the expression is from INF or DEC.
When a FeatureFlagExpression is present,if the expression evaluates
to TRUE,then the entry is valid. If the expression evaluates to FALSE,
then the EDK II build tools must ignore the entry.
This patch is going to add this feature.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Heng Luo <heng.luo@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Yi Li <yi1.li@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3802
Since PRM module needs to support export table in PE-COFF, we'll
enhance GenFw tool to support this.
Add one export flag in GenFw tool. If export flag is set:
Step1: Scan ELF symbol table based on PRM module descriptor to get
descriptor offset address;
Step2: Find PRM handlers number and name in COFF file based on the
address from step1;
Step3: Write PRM info such as handler name and export RVA into COFF
export table.
PRM option currently only supports DXE RUNTIME driver and X64 arch.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Lixia Huang <lisa.huang@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790
Upgrade the version of NASM tool to avoid compilation errors when
compiling NASM code change.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3417
Update the brotli submodule to the latest commit (f4153a0)
so that the build isn't broken in GCC 11 compilers.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Building with the CLANG35 and CLANG38 toolset fails because of variables
which are set but not otherwise used in the RELEASE build.
GCC added -Wno-unused-but-set-variable back in 2016, and later added
-Wno-unused-const-variable. Add those to CLANG35_WARNING_OVERRIDES and
CLANG38_WARNING_OVERRIDES.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Fix a Edk2Logger.warn() message format to match the arguments.
We ran into this after a failure in PcdValueInit. The failure was
masked by a new exception, "TypeError: not all arguments converted
during string formatting".
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3810
New macro OBJCOPY_STRIPFLAG is added in build_rule.template to replace
'--strip-unneeded -R .eh_frame', so that module can have some unique
objcopy flags for its own purpose.
In tools_def.template, set '--strip-unneeded -R .eh_frame' as default
value of OBJCOPY_STRIPFLAG.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
There are two type variable header and their size are different,
need to use matched size when calculating offset info, otherwise
it'll destroy other variables content when patching.
Signed-off-by: Chen, Lin Z <lin.z.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
currently the --cmd-len build option does not work.
This patch is going to fix this bug.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3752
Add Bit mask to numeric/one of opcode to set correctly Flags for Bit Field.
VfrSyntax.g: Set "LFlags &= EDKII_IFR_DISPLAY_BIT" before "LFlags |= (EDKII_IFR_NUMERIC_SIZE_BIT & (_GET_CURRQEST_VARSIZE()));"
VfrFormPkg.h: update "if (LFlags & EFI_IFR_DISPLAY)" with "if (LFlags & EDKII_IFR_DISPLAY_BIT)" in SetFlagsForBitField()
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Long1 Huang <long1.huang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Currently the PCD Value only support 13 Guid,When use more 13 pcd will cause the build tool fail,
Need calculate the required memory,then allocate it.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3718
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Xiaolu Jiang <xiaolu.jiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In order to support secure boot with authenticated type variable store
and non secure boot with normal type variable store, add one flag to
switch them.
User can append '-D VPD_AUTHENTICATED_VARIABLE_STORE' to build command
to enable authenticated type varaible store.
Also, user can add 'VPD_AUTHENTICATED_VARIABLE_STORE = TRUE/FALSE' to the
defines section of Dsc file to switch authenticated/normal type variable
store.
VPD_AUTHENTICATED_VARIABLE_STORE is a new reserved key word for this function.
Signed-off-by: Chen Lin Z <lin.z.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently when parse VFR files to get the struct info,
BOOLEAN type struct is ignored, which caused offset errors.
This patch fixed these bugs.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3687
If a C structure parsed by the VFR compiler contains an unnamed
field, then mFieldName is left uninitialized, which generates
random data in the VFR compiler output file.
If the FieldName is NULL, then initialize pNewField->mFieldName
to a Null-terminated empty string.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently the realpath is used when parse modules, which shows the
path with a drive letter in build log. In Windows 'subst' comand is
used to associates a path with a drive letter, when use the mapped
drive letter for build, with realpath function the build log will
have different disk letter info which will cause confusion. In this
situation, if use adspath function to show the path info, it will keep
same letter with the mapped drive letter, which avoids confusion.
This patch modifies the realpath to abspath.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3653
The "target.txt" and "tools_def.txt" filenames are hard-coded
at some places when global definitions are available at:
BaseTools/Source/Python/Common/TargetTxtClassObject.py:
DefaultTargetTxtFile
and
BaseTools/Source/Python/Common/ToolDefClassObject.py:
DefaultToolsDefFile
Use these global definitions instead.
Also remove the unused gBuildConfiguration and gToolsDefinition
variables from build.py
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3653
The Makefile and MakefilName fields are never set/used. Remove them.
To check this, the following commands can be used:
- grep -rIn "\.Makefile"
- grep -rIn "\.MakefileName"
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3653
Running the following command:
python3 build/build.py -a AARCH64 -t GCC5
-p ArmPlatformPkg/ArmPlatformPkg.dsc -b DEBUG libraries
triggers the following error:
make: *** Build/ArmPlatform/DEBUG_GCC5/AARCH64/MdePkg/Library/
BasePcdLibNull/BasePcdLibNull: Is a directory. Stop.
Indeed, MakefileName is set to en empty string. Setting MakefileName
resolves the error.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3653
Use the value set in tools_def.txt when the makefile type is
not explicitly set via BuildOption. This allows to have a
valid default makefile name instead of an empty string.
Also use GMAKE_FILETYPE instead of hard-coded "gmake".
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Linaro no longer do gcc releases - they're done by Arm now.
Update gcc_aarch64_linux_ext_dep.yaml to fetch the latest AARCH64 gcc
release (10.3-2021.07) from their site and fix LinuxGcc5ToolChain.py with the
new GCC_AARCH64_PREFIX.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
Linaro no longer do gcc releases - they're done by Arm now.
Update gcc_arm_linux_ext_dep.yaml to fetch the latest ARM gcc release
(10.3-2021.07) from their site and fix LinuxGcc5ToolChain.py with the
new GCC_ARM_PREFIX.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
Change GenFv for Arm architecture to generate a specific jump
instruction as image entry instruction, when the target entry label
is assembled with Thumb instruction set. This is possible since
SecCoreEntryAddress value fetched from the PE32 has its LSBit set when
the entry instruction executes in Thumb mode.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In Split tool, the copy file actions only need to
copy file content but not need to copy file metadata.
copy2() copies the file metadata that causes split
unit test failed under edk2-basetools CI environment.
So this patch changes the call of copy2() to copyfile().
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
distutils.utils is no longer used anywhere, so this check can
be dropped.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
threading camelCase functions have preferred alternatives since
python2.6. python3.10 has started emitting DeprecationWarnings
for them
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2507
The COMMON section is used by OpenSSL assembly-optimized crypto
functions. OpenSSL assembly code is auto-generated from the submodule
and cannot be modified to remove dependence on the COMMON section.
The default -fno-common compiler flag should still prevent variable from
being emitted into the COMMON section.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Christopher Zurcher <christopher.zurcher@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
* Update GetMaintainer.py to support an optional GitHub ID at the
end of maintainer and reviewer lines.
* Remove contents after email address from standard output
* Fix minor issue in --lookup to convert file path separators
from '\' to '/' to be compatible with regular expression
file matching.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3459
This patch adds support for R_RISCV_PCREL_LO12_S relocation type.
The logic is same as existing R_RISCV_PCREL_LO12_I relocation
except the difference between load vs store instruction formats.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Pete Batard <pete@akeo.ie>
Cc: Abner Chang <abner.chang@hpe.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Acked-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1688
In order to support binary build, build tool add a
flag to convert type of Dynamic Pcd to DynamicEx Pcd
User can append -D PCD_DYNAMIC_AS_DYNAMICEX to build command
to enable this function.
Also, user can add "PCD_DYNAMIC_AS_DYNAMICEX = TRUE/FALSE" to the
defines section of Dsc file to enable this function.
PCD_DYNAMIC_AS_DYNAMICEX is a new reserved key word for this function.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the ConvertFceToStructurePcd.py tool generate
StructurePcd dsc file with comments from UNI file including
non-ascii character. Following DSC spec, there should not have
non-ascii character in DSC file. This patch removes the non-ascii
character when adding the comment and changes the circle R to (R).
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Mergify adds merge commits to a PR when processing PRs using
the queue feature with auto rebase. Update PatchCheck.py
to ignore commit message issues with these merge commits.
These merge commits are not added to the base branch when
the PR is merged by Mergify.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3096
This patch adds support for R_RISCV_CALL_PLT and R_RISCV_GOT_HI20
relocations generated by PIE enabled compiler. This also needed
changes to R_RISCV_32 and R_RISCV_64 relocations as explained in
https://github.com/riscv/riscv-gnu-toolchain/issues/905#issuecomment-846682710
Testing:
1) Debian GCC 8.3.0 and booted sifive_u and QMEU virt models.
2) Debian 10.2.0 and booted QEMU virt model.
3) riscv-gnu-tool chain 9.2 and booted QEMU virt model.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Tested-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
When using the in-source BaseTools, edksetup.bat will exit with an
ERRORLEVEL of 1 because the line in toolsetup.bat
"%PYTHON_COMMAND% -c "import edk2basetools" >NUL 2>NUL"
fails.
Ensure ERRORLEVEL is set to 0 when edksetup.bat or toolsetup.bat is
successfully run.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The words "overwrite" and "overwriting" are one word and shouldn't have
hyphens.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Split is now a Python tool, so BaseTools\Bin\Win32\Split.exe no longer
exists. Remove the check for it from toolsetup.bat to prevent the
erroneous claim that the binary C tools are missing.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This is the fix of the regression issue at c6b872c6.
Based on ELF spec, readonly alloc section is .rodata section. It is used.
This fix is to add back original check logic for ELF section. Now,
the readonly alloc section and execute alloc section are regarded as .text.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Commit c6b872c updates GenFw base code attribute to find .text section.
With GCC49 tool chain, aslc file is compiled into elf image.
But, its text section has no CODE attribute. So, it can't be detected
by new GenFw tool.For this type file. its text section is not required.
Its data section will be converted to acpi table.
This fix is to remove assert check when the generated image is ACPI data.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
CLANGDWARF is more proper because it's similar to CLANGPDB that generates
PE images but with DWARF debug symbols.
This toolchain is needed for creating ELF format universal payload that
follows https://universalpayload.github.io/documentation/.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The .dynamic section is needed for ELF runtime relocation.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1603
LLVM/CLANG8 formal release http://releases.llvm.org/download.html#8.0.0
It can be downloaded and installed in Windows/Linux/Mac OS.
CLANG8ELF tool chain is added to generate ELF image, and convert to PE/COFF.
On Windows OS, set CLANG_HOST_BIN=n, set CLANG8_BIN=LLVM installed directory
For example:
set CLANG_HOST_BIN=n # use windows nmake
set CLANG8_BIN=C:\Program Files\LLVM\bin\
On Linux/Mac, set CLANG8_BIN=LLVM installed directory
This tool chain can be used to compile the firmware code. On windows OS,
Visual Studio is still required to compile BaseTools C tools and nmake.exe.
On Linux/Mac OS, gcc is used to compile BaseTools C tools. make is used
for makefile.
This tool chain is verified on OVMF Ia32, X64 and Ia32X64 to boot Shell.
This tool chain is verified in Windows/Linux and Mac OS.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
LLVM/CLANG doesn't support resource section generation when ELF image generated.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
CLANG8ELF tool chain generated ELF image with the different attributes
in section. Update GenFw to handle them.
1. .text section with writable attribute (support)
2. .reloc section has the symbol for *ABS* (skip)
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
LLVM LLD linker doesn't support common-page-size option. So, max-page-size
is used. To not impact GCC tool chain, new ClangBase.lds is added.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
When build.by POSTBUILD handling section returns other than 0, set
ReturnCode to POSTBUILD_ERROR so build.py exits with return code other
than 0.
Fix for https://bugzilla.tianocore.org/show_bug.cgi?id=1977
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Some/all platforms are going to require EDK2 to build a device tree and
use it in the early stages of boot.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Abner Chang <abner.chang@hpe.com>
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
Currenly, when using the Brotli tool to compress data, the output
compressed binary file does not record complete compressed data
when size of input file is too large, which makes the data loss and
will trigger decompress-check issue.
The Brotli document mentioned:
The brotli tool use BrotliEncoderCompressStream method to compresses
input stream to output stream. Under some circumstances (e.g. lack of
output stream capacity) the BrotliEncoderOperation would require
several calls to BrotliEncoderCompressStream. The method must be
called again until both input stream is depleted and encoder has no
more output after the method is called.
This patch fixes this issue based on the Brotli document.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add support for the ImageCapsuleSupport field, introduced in version 3
of the EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER structure. This
structure member is used to indicate if the corresponding payload has
support for authentication and dependency.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
If the DSC file provides an override of a Guided tool path
and/or Guided tool GUID value, then make sure the one from the
DSC file is used if it is higher priority than the Guided tool
in the tools_def.txt file. This makes the Guided tool used by
GenFds match the tool listed GuidedSectionTools.txt.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
* Save/Restore global state in GetToolChainAndFamilyFromDsc()
This resolves an issue where the multi-arch build for
UefiPayloadPkg would skip the autogen and build of IA32
components.
* Expand tools wildcard.
This resolves the issue where autogen makefile contents
would have a BUIDLRULEFAMILY tools definitions with an
'*' in the tool field that breaks the build from invalid
makefile syntax.
* Build rule family higher priority than Family.
This resolves the issue where flags were appended from
both the BUILDRULEFAMILY and FAMILY when only
BUILDRULEFAMILY should be appended when present.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
Update BaseTools to support new build targets, new tool chains,
and new architectures declared in DSC file [BuildOptions] sections.
* Do not expand * when tools_def.txt is parsed. Only expand when
both tools_def.txt and DSC [BuilsOptions] sections have been parsed.
This also requires more flexible matching of tool keys that contain *
in tool key fields.
* Pre-scan the platform DSC file for FAMILY and TOOLCHAIN declarations
DSC in [BuildOptions] sections before the FAMILY and TOOLCHAIN need
to be known.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3353
Sort the tool definition content of generated makefiles to help
verify that makefile contents have not changed after BaseTools
code changes.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3344
Veify that TAB_TOD_DEFINES_FAMILY key is present in ToolDef
dictionary before access.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3308
The EDK II Build Specifications do not restrict the set of
CPU architectures that can be supported. Remove places in
the EDK II that assume a fixed set of CPU architectures.
Remove build breaks in the following tools when a check against
a fixed set of CPU architectures is made.
* Build
* GenFds
* TargetTool
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Abner Chang <abner.chang@hpe.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3308
The EDK II Build Specifications do not restrict the set of
CPU architectures that can be supported. Remove places in
the EDK II that assume a fixed set of CPU architectures.
Remove build breaks in the following tools when a check against
a fixed set of CPU architectures is made.
* GenFw
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Abner Chang <abner.chang@hpe.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3312
Update parsing of MAKE_FLAGS in DSC [BuildOptions] sections
to split the flags into a list to be compatible with
running the make command using Popen(). Parsing MAKE_FLAGS
from tools_def.txt already uses _SplitOption(). This change
uses the same _SplitOption() method for MAKE_FLAGS from a
DSC [BuildOptions] section.
Also update the parsing of MAKE_PATH to support MAKE_PATH
from tools_def.txt or the DSC [BuildOptions] section. MAKE_PATH
in DSC [BuildOptions] section is higher priority than MAKE_PATH
in tools_def.txt.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3313
Change MAKE_FLAG to MAKE_FLAGS to match required name from
EDK II Build Specifications for VS20xx tool chains.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
The Ecc tool checks the format of the include guard. This check is
currently done on all the names following the '#ifndef' statement.
It should only be done on the first include guard.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3252
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently the struct parser for StructPcd Generation does not
filter the types such as UINT8 which should be ignored successfully.
This patch modifies this issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently StructurePcd.dsc have the list order issue. For a Pcd
with several elements, the list indexs are used to distinguish
these elements like this:
PcdName.name.offset_name[0]|0x0
PcdName.name.offset_name[10]|0x0
PcdName.name.offset_name[11]|0x0
...
PcdName.name.offset_name[2]|0x0
...
However, the index is not strictly sorted by decimal numerical order,
which is not user friendly. One more sort rule for index is added to
the current rules to support for decimal numerical order in this patch.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Update the external dependency (consumed by Edk2Tools) version for NASM,
as agreed in recent community meetings:
https://edk2.groups.io/g/devel/message/71289https://edk2.groups.io/g/devel/message/71070
This is primarily used by CI builds, but may also be used by platforms.
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The EDK II C Coding Standards Specification states that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used. They are
reserved for compiler implementation." [1]
The Ecc tool currently checks that the include guard end with
a trailing underscore. Thus, the check and the error message
should both be modified.
The new check forces having one sole trailing underscore
character, as the example in the specification shows:
"FILE_NAME_H_" [1]
This would allow to have more consistency.
[1] Section 5.3.5 "All include file contents must be protected
by a #include guard":
https://edk2-docs.gitbook.io/
edk-ii-c-coding-standards-specification/5_source_files/53_include_files
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Use the new edk2-basetools pip module.
Includes a helpful message in setup to let users know which has been
selected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei <Chen<yuwei.chen@intel.com>
Signed-off-by: Matthew Carlson <matthewfcarlson@gmail.com>
If the output file path is a relative path, the split
tool will create the output file under the input file path.
But the expected behavior for this case is the output file
should be relative to the current directory. This patch will
fix this bug.
If the output file path is not specified and output prefix is not
specified, the output file should be under the input file path
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Function '_ModuleEntryPoint' is a pre-defined interface for various EFI
module types and should not be caught violating EFI coding style. This
change added '_ModuleEntryPoint' into exception list to fix EFI coding
style error 8006 during CI build.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3165
This patch is to add the unit test for Split python tool
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3165
There are 2 reasons to convert Split tool from C to Python.
1. We are in the process of moving the Basetools Python code
to a separate repository. But there still are many C tools under
edk2/BaseTools. To make all Basetools be in the separate repo,
we can convert the C tools to Python tools.
2. The original Split tool is very slow. This python tool can reduce
90% time.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
In the following corner case, the build report
will crash. This patch is to fix this problem.
Case:
Multiple SKU are used and 2 more DynamicHii structure Pcds
are set in dsc file under different SKU. And 1 more of those
Pcds are not used in any INF file.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3032
We had a build fail due to the hard coded MAX_LONG_FILE_PATH value.
We should use PATH_MAX if it is available.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Enze Zhu <zhuenze@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
EdkLogger.ERROR() was replaced with EdkLogger.error() to deliver the
expected error message when an error occurs.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3136
Python 3.9 remove the array.array.tostring and
array.array.fromstring() function. This patch
is to use other method to replace tostring() and
fromstring()
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Mingyue Liang <mingyuex.liang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3120
FixedAtBuild, PatchableInModule and FeatureFlag PCD don't use PCD TOKEN.
Their PCD TOKEN value can always be zero.
AutoGen.h will not be changed when static PCD is added or removed.
Dynamic PCD add or remove will still cause dynamic PCD token value be
changed.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
As the condition of while statement is argc > 0, so argc < 1 will always
be false, it's redundant.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When Alignment < 0x400 is false, the expression of Alignment >= 0x400 is
always true. So extract the expression from the else if statement.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3127
If one protocol is not found in package dec file, Build will report the
error message that module.inf(-1): error 4000: Value of Protocol
[gXxxProtocolGuid] is not found under [Protocols] section in MdePkg.dec.
Here, -1 should be the line number of this protocol in module INF file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The Ecc tool currently reports the initialization of variables
at declaraton if the variable is non-constant and declared
in a function. Static variables locally defined in functions
should also be allowed to be initialized at declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ECC tool crashes if a C file has an incorrect file header
format.
The file ArmPkg\Library\ArmMmuLib\AArch64\ArmMmuPeiLibConstructor.c
has a file header in the incorrect format. It uses # to mark the
header comments instead of enclosing the file header in /* */. This
may have been a result of an INF file header being copied to a C
file.
A separate patch fixes the C file but ECC tool should
not crash if a file with an incorrect header is found.
Therefore, update the ECC tool to prevent it from crashing if an
incorrect file header is found. With this change the ECC tool will
report the incorrect header issue without crashing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Currently VFR files have variables comments which will not be
added into StructurePcd.dsc file. Thus, it is not convenient for
developer to Modify Pcds. To solve this problem, The comments will
be modified to user friendly format and added after the corresponding
Pcd values in StructurePcd.dsc file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently, only parts of the Header files can be collected which
caused some struct definition can not be found. To solve this issue,
Header files full collection has been added in this file to support
the struct finding.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This problem is generated by solving bz2972's
patch, and the commit ID is
0af7f8e6a9.
This is a problem when updating the DEPs file.
The code does not consider that there is only
one line of content in the file, so the filter
condition is added to prevent the index from
exceeding the range.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
This is the regression issue in BaseTools BrotliCompress after Brotli
is changed to submodule. BrotliCompress should store the source size
and scratch buffer size into the header of the compressed binary data.
But now, BrotliCompress doesn't store them. So, BrotliDecompress
can't work.
To fix this issue, BrotliCompress tool main() function should be provided.
It needs to support the options of -e, -d, -o file, -g gap, -q level.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add REST_STYLE support on VFR language
BZ: 2916
https://bugzilla.tianocore.org/show_bug.cgi?id=2916
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Signed-off-by: Ye Ting <ting.ye@intel.com>
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: Wang Fan <fan.wang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2528
Currently, CL command contains multiple C files will be compiled,
and that caused command line too long, which may trigger build error.
In order to solve this issue, the following rules is used in this scene:
If the number of C files is greater than one, a txt file will be used
to record these C files, and replaces the corresponding content in
command line with the file name.
Else (only one C file listed in the command line), the length of the
whole CL command line will determine whether use a file to record. If
the length exceeds the limited max length, use the recording file; else
C file name directly listed in the command line
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2977
For a source-level BIOS debugger the .map files are quite useful with one
major shortcoming: the debugger cannot know, solely from the .map file,
the format (PE/COFF vs. TE) of the image included in the final BIOS ROM
Update report map file format
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2977
For a source-level BIOS debugger the .map files are quite useful with one
major shortcoming: the debugger cannot know, solely from the .map file,
the format (PE/COFF vs. TE) of the image included in the final BIOS ROM
Add Type=PE or TE in the map file
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2972
When using incremental build to delete an included xxx.asi file from
the ASL file, the xxx.asl.trim.deps file generated by previous build
process will not be deleted from the OUTPUT directory, which caused
the dependency file still include the xxx.asl.trim.deps file.
If the include file is deleted and DEPs is empty.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
On windows system, when use command chcp displays the number of the
active console code page, if the active console code is 936, run
make cleanall in the BaseTools will hang.
Issue reproduce step:
chcp 936
edksetup.bat VS2015
cd BaseTools
nmake cleanall
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2648
This patch is to enable the Module scoped Structure Pcd usage.
User can set structure pcd field value in module scope. For example,
under the [components] section of a dsc file, user can override some
field value for a specific module.
Package/Module.inf{
<PcdsFixedAtBuild>
gUefiTokenSpaceGuid.StructurePcdModule.FieldName | 5
}
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Tested-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
When generating compressed section, the build tool rely on the
build intermediate files, which were generated in last build, to
get the file list. This method will cause the incremental build to
generate incorrect build result. To reproduce this incremental build
error, you can do:
1. build Ovmf
2. change the module OvmfPkg\AcpiTables a source file Facp.aslc
name from Facp.aslc to Facpxxx.aslc.
3. change the Facp.aslc file name in [sources] section of AcpiTables.inf
4. incremental build Ovmf
you will see the in AcpiTables module Makefile, the corresponding
Facp.acpi file is not changed.
This patch is to make the build always get file list from the INF.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3001
When the 64-bit version of VS compiler is used, the generated
PcdValueInit tool will be failed to compile.
This patch is going to fix that issue.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2938
C tool may add the additional INC include path. They should have
high priority than the common INC include path.
This fix is to resolve the structure PCD issue to refer to the same
header file defined in BaseTools and MdePkg. The one in MdePkg should
be used.
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2938
MdePkg Acpi10.h definition depends on PACKED.
When structure PCD refers to Acpi10.h, build will fail,
because PACKED definition is missing in BaseTools BaseTypes.h.
C source tools include BaseTools BaseTypes.h. They don't include MdePkg Base.h.
When C source tools include MdePkg Acpi10.h, they also need PACKED definition.
So, add PACKED definition into BaseTools BaseTypes.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2881
Currently, the build tool try to read the section alignment
from efi file if the section alignment type is Auto.
If there is no efi generated, the section alignment will
be set to zero. This behavior causes the Makefile to be different
between the full build and the incremental build.
Since the Genffs can auto get the section alignment from
efi file during Genffs procedure, the build tool can just set section
alignment as zero. This change can make the autogen makefile
consistent for the full build and the incremental build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2978
If a module add a new PCD, the pcd token number will be
reassigned. The new Pcd token number should be updated
to all module's autogen files. CanSkip can only detect a
single module's change but not others. CanSkip block the
pcd token number update in incremental build, so this
patch is going to remove this call.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2880
Currently, When doing the Incremental build, the directory
macros extended to absolute path in output Makefile, which
is inconsistent with the output of Clean build.
When we do macro replacement, we can't replace macro due to
inconsistent path case, which results in inconsistent display
of incremental build and clean build in makefile.Therefore,
the path is converted to achieve the correct macro replacement.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2965
The content in Guid.xref depends on the files under the corresponding
ffs folder.(refer to the commit 5e9256cd7f)
To make Guid.xref update in the incremental build,
clean the files under that ffs folder before generating files in it.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2882
After changing the name of the include source file,
when doing incremental build, the previous source file
is not covered in the. DEPs file, and a build error occurs.
The root cause is that the build tools filter out some dependency
files, which are listed in inf source section, from the deps_target file.
Add those files back to deps_target file to resolve the above problem.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
The IASL extdep is used for CI only and a recent fork of the ACPICA
repo was made to make nuget builds more regular and easier to audit.
https://dev.azure.com/projectmu/_git/acpica
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Matthew Carlson <matthewfcarlson@gmail.com>
If VPD PcdNvStoreDefaultValueBuffer is used, all DynamicHii and
DynamicExHii PCD value will be generated into that VPD.
In order to generate the same VPD binary file in every build,
sort the Pcd set when generating VPD.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2904
The path separator is different in Windows and Linux, the
original code does not handle this difference. This patch
is to fix this issue.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20200901102315.38840-1-bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
edksetup.bat VS2017 should set VS2017 only. But now,
it will set VS2017/VS2019 both. This patch corrects it.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2896
When VS2017/VS2019 are both installed. VS prefix setting will
wrongly be set. VS2017_PREFIX is set to the same value of VS2019.
This patch clears VSINSTALLDIR and VCToolsVersion env, then
the different vcvars32 can set the correct VS env.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2896
Keep the latest VS version as the last one
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In python3, array.array.tostring() was a compat alias for tobytes().
tostring() was removed in python 3.9.
Convert this to use tolist() which should be valid for all python
versions.
This fixes this build error on python3.9:
(Python 3.9.0b5 on linux) Traceback (most recent call last):
File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 593, in Main
GenerateVfrBinSec(CommandOptions.ModuleName, CommandOptions.DebugDir, CommandOptions.OutputFile)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 449, in GenerateVfrBinSec
VfrUniOffsetList = GetVariableOffset(MapFileName, EfiFileName, VfrNameList)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 88, in GetVariableOffset
return _parseForGCC(lines, efifilepath, varnames)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 151, in _parseForGCC
efisecs = PeImageClass(efifilepath).SectionHeaderList
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 1638, in __init__
if ByteArray.tostring() != b'PE\0\0':
AttributeError: 'array.array' object has no attribute 'tostring'
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
python3.9 changed/fixed codec.register behavior to always replace
hyphen with underscore for passed in codec names:
https://bugs.python.org/issue37751
So the custom Ucs2Search needs to be adapted to handle 'ucs_2' in
addition to existing 'ucs-2' for back compat.
This fixes test failures on python3.9, example:
======================================================================
FAIL: testUtf16InUniFile (CheckUnicodeSourceFiles.Tests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 375, in PreProcess
FileIn = UniFileClassObject.OpenUniFile(LongFilePath(File.Path))
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 303, in OpenUniFile
UniFileClassObject.VerifyUcs2Data(FileIn, FileName, Encoding)
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 312, in VerifyUcs2Data
Ucs2Info = codecs.lookup('ucs-2')
LookupError: unknown encoding: ucs-2
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
AsBuiltInf can be created during AutoGen phase. Move CreateAsBuiltInf
into AutoGenWorker to make this step run in parallel.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2807
The Queue.empty() method is not reliable in the multiple
process runtime environment. This patch uses a new method
to check if all modules are processed and workers need
to be stopped. That is to add a None item at the bottom
of the queue. Worker check if it gets that None item to
know if all the module is processed.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Lucy Yan <lucyyan@google.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2349
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This reverts commit a4cfb842fc.
This commit suggests inclusion of non-edk2+license content without
a contribution agreement is something the community has made a
decision on, which is incorrect.
Cc: Shenglei Zhang <shenglei.zhang@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:2864 GCC build fails due to variable self assignment.
This local variable is not used at any where, we can just remove it.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This reverts commit dbd546a32d.
This patch also breaks about half of the ARM/AARCH64 platforms in edk2-platforms
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
If the submodule is upgraded, skip the CRLF check as it isn't change for
file.
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2624
When EFI file come from binary file, not generate .map file, so need ignore the map file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2842
To use LLVM to build BaseTools, first set the CLANG_BIN environment value,
and add "CXX=llvm" to choose LLVM compiler set when using make command.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
During build, the meta files are not changed, so it's no need
to check file timestamp.
This patch is to remove useless logic.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ReadMe file is now RST, so update the filename extension to match.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
ReadMe.txt contained outdated information. Update it to match current
functionality (e.g. sqlite3 is no longer used), and convert the
formatting from ad-hoc to reStructuredText.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GCC48_ALL_CC_FLAGS has no dependency on GCC_ALL_CC_FLAGS.
By definition, there should be such dependency.
The outcomes of this patch is that GCC48_ALL_CC_FLAGS and
other dependent configurations will inherit from the
additional "-Os" flag.
The "-Os" flag optimizes a build in size, not breaking any
build. In a gcc command line, the last optimization flag
has precedence. This means that this "-Os" flag will be
overriden by a more specific optimization configuration,
provided that this more specific flag is appended at the
end of the CC_FLAGS.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
By default, gcc allows void* pointer arithmetic.
This is a GCC extension.
However:
- the C reference manual states that void*
pointer "cannot be operands of addition
or subtraction operators". Cf s5.3.1
"Generic Pointers";
- Visual studio compiler treat such operation as
an error.
To prevent such pointer arithmetic, the "-Wpointer-arith"
flag should be set for all GCC versions.
The "-Wpointer-arith" allows to:
"Warn about anything that depends on the "size of"
a function type or of void. GNU C assigns these
types a size of 1, for convenience in calculations
with void * pointers and pointers to functions."
This flag is available since GCC2.95.3 which came out in 2001.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2836
Current PatchCheck.py checks each line to ensure line's length is not
larger than 76. But there's a case that length of user's name is much
longer than that number. So enhance the script to handle this case.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2762
The Fv Section in the FDF files use hard coding Guid values
which is inconvenient to manage. This patch adds Guid name
support in GenFfs to solve this problem.
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2797
Update HOST_APPLICATION module type to use NULL library instances.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
SetupGit.py sets the git config option diff.orderFile to
{edk2 directory}/BaseTools/Conf/diff.order, to override the default order
in which files are shown in a diff/patch/whatever. This is in imitation
of what is done manually in Laszlo's Unkempt Guide.
However, the version currently in the tree is in CRLF format, which makes
git interpret e.g. *.c as matching on *.c<CR>, finding no matches and
failing to apply the desired reordering. Note: this is true regardless of
whether running on Linux or Windows.
Convert the file to LF-only to make it work as expected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
On Debian 10 (Buster), when running PatchCheck.py with python2, a
backtrace is printed, starting from:
File "../edk2/BaseTools/Scripts/PatchCheck.py", line 595,
in find_patch_pieces
parts = email.header.decode_header(pmail.get('subject'))
AttributeError: 'module' object has no attribute 'header'
When using python3, this backtrace does not appear.
Explicitly importing email.header resolves this for python2 and does not
appear to cause any issues with python3.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
SetupGit.py adds BaseTools/Conf/diff.order as a diff orderfile, but that
file currently has CRLF line endings, which causes all pattern matches
to fail and the ordering remaining unaffected.
Add an exception to PatchCheck.py (to the existing .gitmodules clause),
so that we can merge the fix to the config file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Using Python 3.7.2 on win32, when printing a FileBuildRule
instance, the following error occurs:
File "edk2\BaseTools\Source\Python\AutoGen\BuildEngine.py",
line 177, in __str__
DestString = ", ".join(self.DestFileList)
TypeError: sequence item 0: expected str instance, PathClass found
This patch converts each PathClass element of the list to a string
instance before concatenating them.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The AmlToHex script and Posix/WindowsLike wrappers convert
an AML file to a .hex file, containing a C array storing
AML bytecode. This ".hex" file can then be included in a
C file, allowing to access the AML bytecode from this C
file.
The EDK2 build system doesn't allow to a depict dependency
orders between files of different languages. For instance,
in a module containing a ".c" file and a ".asl", the ".c"
file may or may not be built prior to the ".asl" file.
This prevents any inclusion of a generated ".hex" in a
".c" file since this later ".hex" file may or may not
have been created yet.
This patch modifies the AmlToC script to generate a C file
instead of a ".hex" file.
It also adds the generation of an intermediate ".amli" file
when compiling an ASL file, and adds a rule to convert this
".amli" to a C file.
This allows to generate a C file containing the AML bytecode
from an ASL file. This C file will then be handled by the EDK2
build system to generate an object file.
Thus, no file inclusion will be required anymore. The C file
requiring the AML bytecode as a C array, and the ASL file,
will be compiled independently. The C array must be defined
as an external symbol. The linker is resolving the
reference to the C array symbol.
To summarize, the flow goes as:
-1. ASL file is compiled to AML;
-2. AML file is copied to a ".amli" intermediate file;
-3. EDK2 build system applies the rule relevant to ".amli"
files. This is, calling the "AmlToC" script, generating
a C file from the ".amli" file;
-4. EDK2 build system applies the rule relevant to C files.
This is creating an object file.
-5. EDK2 build system links the object file containing the
AML bytecode with the object file requiring it.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The AmlToHex script and Posix/WindowsLike wrappers convert
an AML file to a .hex file, containing a C array storing
AML bytecode. This ".hex" file can then be included in a
C file, allowing to access the AML bytecode from this C
file.
The EDK2 build system doesn't allow to a depict dependency
orders between files of different languages. For instance,
in a module containing a ".c" file and a ".asl", the ".c"
file may or may not be built prior to the ".asl" file.
This prevents any inclusion of a generated ".hex" in a
".c" file since this later ".hex" file may or may not
have been created yet.
This patch renames the script as AmlToC. It is posted as
a separate patch to prevent git from seeing the renaming
as a deletion plus addition of a new file.
The ending line of the posix-like bin-wrapper script has
also been corrected.
This is a first step toward generating a C file containing
the AML bytecode from an ASL file. This C file will then
be handled by the EDK2 build system to generate an object
file.
Thus, no file inclusion will be required anymore. The C file
requiring the AML bytecode as a C array, and the ASL file,
will be compiled independently. The C array must be defined
as an external symbol. The linker is resolving the
reference to the C array symbol.
To summarize, the flow goes as:
-1. ASL file is compiled to AML;
-2. AML file is copied to a ".amli" intermediate file;
-3. EDK2 build system applies the rule relevant to ".amli"
files. This is, calling the "AmlToC" script, generating
a C file from the ".amli" file;
-4. EDK2 build system applies the rule relevant to C files.
This is creating an object file.
-5. EDK2 build system links the object file containing the
AML bytecode with the object file requiring it.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This patch modifies the Makefile generation not to stop
adding Makfile rules when the first final target is found.
E.g.:
If the following rules are described in build_rule.txt:
-[Rule1]: .X files generate .Y and .Z files;
-[Rule2]: .Z files generate .Z1 files.
Currently, if a File1.X file was part of the sources of a
module, only [Rule1] would be generated in the Makefile.
Indeed, there are no rules to apply to .Y files: .Y files
are a final target. However, there is still [Rule2] to
apply to .Z files.
This patch also adds a dependency between the first
ouput file of a rule and the other output files.
For instance, with the same example as above, File1.Y
and File1.Z are generated by the following rule:
File1.Y: File1.X
<Generate File1.Y>
<Generate File1.Z>
and the new dependency is:
File1.Z: File1.Y
This is necessary to keep a dependency order during the
execution of the Makefile. Indeed, .Y and .Z files are
generated by the execution of a common set of commands,
and without this rule, there is no explicit dependency
relation between them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Bash scripts require LF line endings to work.
PatchCheck.py checks that the files added in a patch have CRLF
line endings. It excludes files ending with the ".sh" extension
from this check.
Some bash script don't have a ".sh" extension. Most of them are
located in:
- BaseTools/BinWrappers/PosixLike/
- BaseTools/Bin/CYGWIN_NT-5.1-i686/
This patch excludes these folder plus BaseTools/BuildEnv from
this CRLF check.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add opensbi external definitions to RISC-V build for assembly
code. Use GCC5_RISCV_OPENSBI_TYPES to refer to edk2 data type
for assembly files instead of using opensbi data type.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2691
For files to be added to the tree, this feature will check
whether it has BSD plus patent license. If not, licenses listed in
Readme are also accepted but warning will be reported.
Otherwise, it should be error.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2790
If the top FFS is placed in FV image, current FV will show there is no space.
In fact, the pad ffs in FV image can be regarded as the spare space.
This change reports the max pad ffs size as the spare space for use.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2770
The Trim.py would break the build process when the file not found
issue occures, however sometimes we do not care about this issue.
This patch changes the error with warning in order to solve this
kind of break.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
AutoGen manager/workers halt the progress when an error occurs but
doesn't propagate the error code to main and allows main exit with 0
and gets the build system unable to catch the occurrence of an error.
This change informs main with an error when a progress is halted and
helps main exit with 1.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
Provided a mechanism for UEFI FW to identify and hand off bootable
NVDIMM namespaces to the OS by standardizing the EFI device path.
EFI device path for physical NVDIMM devices changed from an ACPI
_ADR device to an ACPI NVDIMM device for correctness.
(UEFI 2.8 mantis 1858)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
In question level, a new flag EFI_IFR_FLAG_REST_STYLE is defined.
(UEFI 2.8 mantis 1853)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2686
The build tool will give an incorrect GUID value if the GUID includes character ' or " ASCII value.
This patch is going to fix this issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2707
Ecc fails with Python 3.8 because it uses the deprecated time.clock()
function - https://docs.python.org/3.7/library/time.html#time.clock
This change updates EccMain.py to use time.perf_counter().
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2513
Update HostBasedUnitTestRunner plugin to support the Linux environment
and remove any Windows only logic.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GetMaintainer.py already extracts the value of any S: tags for sections,
but it doesn't do anything with that information.
Print a warning message, with the status, for each matching section with
a status explicitly set to anything other than 'Supported' or
'Maintained'.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Allow users who didn't clone one of the TianoCore repos from a
canonical URL to specify the name of the repo (edk2, edk2-platforms
or edk2-non-osi) when running SetupGit.py to allow them to configure
their repo properly.
The new option is:
-n repo, --name repo set the repo name to configure for, if not
detected automatically
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2654
If FV is placed in FD region, its FV image size is fixed.
When FV image size exceeds it, it will trig the build break.
To alert the developer to adjust FV image size earlier,
I request to add new checker for the the spare FV space.
When the spare FV space is less than the specified threshold,
build tool will report the error.
This checker is the optional.
It can be enabled by -D FV_SPARE_SPACE_THRESHOLD=10000.
Macro is the value of the spare space threshold size.
It can be decimal or hex format. If it is enabled,
BaseTools will check every FV with the fixed size.
If FV doesn't meet with the size requirement,
Build tool will report error message to say there is no
enough spare space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Use submodule way to access brotli in BaseTools based on
brotli version 666c3280cc11dc433c303d79a83d4ffbdd12cc8d.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2558
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2659
Allow WindowsVsToolChain Plugin to add libraries and headers
of user defined ARCH for VS2017 and VS2019.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2628
This patch reduces the size of IA32 binaries by ensuring that
no .debug_frame / .eh_frame sections are generated through forcing
SEH exception model, which is already the default in clang for X64.
EDK II does not support exceptions, and in future we should disable
them instead of switching to some other variant. Currently this
is not possible due to the following LLVM bugs:
https://bugs.llvm.org/show_bug.cgi?id=45324https://bugs.llvm.org/show_bug.cgi?id=45325
Upon applying this patch OvmfPkgIA32.dsc compilation in DEBUG mode
gets the following size decrease with clang 9.0.1.
Before: FV Space Information
SECFV [11%Full] 212992 total, 24512 used, 188480 free
PEIFV [22%Full] 917504 total, 203048 used, 714456 free
DXEFV [36%Full] 11534336 total, 4215672 used, 7318664 free
FVMAIN_COMPACT [37%Full] 3440640 total, 1287776 used, 2152864 free
After: FV Space Information
SECFV [10%Full] 212992 total, 22112 used, 190880 free
PEIFV [19%Full] 917504 total, 176392 used, 741112 free
DXEFV [31%Full] 11534336 total, 3657112 used, 7877224 free
FVMAIN_COMPACT [33%Full] 3440640 total, 1153896 used, 2286744 free
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marvin H?user <mhaeuser@outlook.de>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2640
Azure Pipelines agents have 2 threads. This commit has been shown to
reduce the build time in half on those agents.
Cc: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Bob C Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2538
For LzmaCompress or BrotliCompress, the platform may use the different
options and add their batch file, such as LzmaCompressPlatform.
Then, specify it in platform.dsc [BuildOptions] to override the default
one in tools_def.txt.
*_*_*_LZMA_PATH = LzmaCompressPlatform
This override tool will be used. But, its name is not specified in the
generated GuidedSectionTools.txt.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2610
We meet a case that the DEC file declaring the PCD isn't
included in the INF.it cause build tools report Traceback error.
Remove raise statements that generate Tracebacks that were only
intended for development/debug. With the raise statements removed
proper error messages are shown.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2365
This patch is to fix a build tool regression issue which was introduced
by commit 8ddec24dea.
compiler output message includes localized string.
So build failed when code decode the stdout/stderr byte arrays.
The cause of the build failed is that Commit 8ddec24dea
removed "errors='ignore'".
The build tool does not need to deal with localized string,
so we need to add "errors='ignore'".
this function is only invoked for structure PCDs.
Build failed if structurePcd is used in platform dsc file.
The patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2568
PcdValueInit shares the same Edk2\BaseTools\Source\C\PcdValueCommon.c.
To avoid the conflict, it should copy this file to its output directory,
If so, PcdValueCommon.c file will be private for PcdValueInit
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2563
This patch is to fix a incremental build regression bug
which happen when using nmake. That's introduced by 818283de3f.
If there is white space before !INCLUDE instruction, nmake will not
process it. Source code's dependent header files are listed in
${deps_file} file, if it's not included successfully, nmake will
not detect the change of those header file.
This patch has been verified in Windows with VS2015 and Linux with GCC5.
The header file add/modify/delete can trig the incremental build with this fix.
There is no impact on the clean build.
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2524
remove -DNO_MSABI_VA_FUNCS option in CLANGPDB tool chain After CLANGPDB is
switched to GNU mode, to use MS ABI version of GCC built-in macros for
variable argument lists as same as CLANG38 tool chain.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2520
Incremental build failure in CLANGPDB tool chain on Windows host
The build failure is like below when do incremental build.
The root cause is in generated deps_target file. It has one line ":".
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2304
SyntaxWarning: "is" with a literal. Did you mean "=="?
Using "is" instead of "==" is an irregular syntax
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2142
gAdvancedFeaturePkgTokenSpaceGuid.PcdSmbiosType0BiosInformation|
{0x0}|SMBIOS_TABLE_TYPE0|0x80010000 {
<HeaderFiles>
IndustryStandard/SmBios.h
<Packages>
MdePkg/MdePkg.dec
AdvancedFeaturePkg/AdvancedFeaturePkg.dec
}
If there's a PcdStructHF or PcdStructPKGs in StructPcd,
EccTool report error,IndexError: list index out of range
This patch is going to fix this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
NASM_INC contains the list of directory to include when using
the nasm assembler.
In nmake makefiles, a trailing backslash escapes the newline char
and replaces it with a space ' '. To have a literal trailing
backslash, it must be escaped with a caret '^'. This is not
necessary for GNU makefiles.
On windows platforms, for the NASM_INC macro, a caret escaping
a trailing a backslash was appended to the last included
folder regardless of the makefile type.
For instance, "/Include/" was replaced by "/Include/^\".
This is causing a build failure on windows platforms using
GNU makefiles since the caret '^' doesn't escape any chars in
GNU makefiles and is thus conserved.
"/Include^\" was replaced by "/Include\/" in nmake makefiles,
but remained "/Include/^\" in GNU makefiles.
This patch removes the caret '^' on the build using GNU makefiles.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The GenMake.py script tests the platform environment
to determine the type of makefile that needs to be
generated. If a Windows build host is detected, the
makefile generated is of Nmake type. Otherwise a
GNUmake type is generated.
Furthermore, the <TARGET>_<TAGNAME>_<ARCH>_MAKE_PATH
option in tools_def.template defines the make tool
to use.
E.g.: for VS2017 this is configured to use Nmake, cf.
*_VS2017_*_MAKE_PATH = DEF(VS2017_BIN_HOST)\nmake.exe
while for GCC5 it is setup to use GNU make.
*_GCC5_*_MAKE_PATH = DEF(GCC_HOST_PREFIX)make
This prevents using the GCC compiler toolchain on a
Windows build host.
To address this issue this patch introduces 2 factors
to determine the generated makefile output.
1. Platform -> to determine shell commands used
in makefile.
2. MakeTool -> to determine the type of makefile
that needs to be generated.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The .map file is not update to FFS_OUTPUT_DIR folder
in the incremental build.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add plugin to BaseTools to run host based unit tests.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2496
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2495
Update the WindowsVsToolChain plugin to setup the VS2017
or VS2019 development environment. This is required to
build BaseTools and Structured PCD host applications.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2495
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2496
Reduce the build and env dependencies for the Structured PCD
application by removing the dependency on Common.lib that
is only built when BaseTools is built which does not
happen if pre-compiled BaseToools are used. Change the
makefile for the Structure PCD application to build all
files from sources which adds PcdValueCommon.c to the
makefile. Also remove PcdValueCommon.c from Common.lib.
With the change to the makefile for the Structured PCD
application, multiple C files are compiled. Only
PcdValueInit.c contains the extra information expected
by the error/warning message parser. Only parse the
DSC line number into an error message if there is an
error/warning in PcdValueInit.c. Errors/warnings in
other files should be passed through. This fixes a build
failure with no useful log information that was observed
when there was a compiler error in PcdValueCommon.c.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2487
The call stack unwindability of the COFF X64 binary requires
the binary to remain the pdata and xdata sections.
Details see the MSVC X64 calling convertion doc in below link:
https://docs.microsoft.com/en-us/cpp/build/x64-calling-convention
Current build options discard or zero the data in pdata and xdata
sections which cause the debugger cannot correctly unwind the
X64 binary call stack in the runtime.
Enhance the build options to force emit the unwind tables and
keep the data of pdata and xdata sections correct in the binary.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2502
This option is required to make GCC49 tool chain work with the high
version GCC compiler.
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The "-tc" option of the iasl compiler allows to generate a
.hex file containing a C array storing AML bytecode.
An online discussion suggested that this "-tc" option
was specific to the iasl compiler and it shouldn't be relied
on. This conversation is available at:
https://edk2.groups.io/g/devel/topic/39786201#49659
A way to address this issue is to implement a compiler
independent script that takes an AML file as input, and
generates a .hex file.
This patch implements a Python script that converts an AML
file to a .hex file, containing a C array storing AML bytecode.
This scipt has been tested with the AML output from the
following compilers supported by the EDKII implementation:
* Intel ASL compiler
* Microsoft ASL compiler
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
We check the author/committer name/email are properly displayed
since commits 8ffa47fb3ab..c0328cf3803. However if PatchCheck.py
uses the mailmap, it will check sanitized names/emails.
Use the --no-use-mailmap option so PatchCheck.py will check
unsanitized input.
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Due to strict DMARC / DKIM / SPF rules, Groups.Io sometimes rewrite
the author email. See for example commit df851da3ce.
Add a check to detect these rewrites with PatchCheck.py.
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
We added .mailmap to the repository in commit 4a1aeca3bd
to display commit mistakes fixed. Use this option by default in our
git setup.
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2494
When using structured PCDs, a C application is auto generated
to fill in the structured PCD value. The C application uses
the standard include files <stdio.h>, <stdlib.h>, and <string.h>.
This C application also supports include paths from package DEC
files when a structured PCD declaration provides a <Packages>
list. The complete list of include paths are -I options for
include paths from package DEC files and the compiler's standard
include paths.
-I include paths are higher priority than the standard include
paths. If the -I included paths from package DEC files contain
<stdio.h>, <stdlib.h>, or <string.h> the wrong include files are
used to compile the C application for the structured PCD value.
Update GenerateByteArrayValue() to skip a package DEC include
paths that contain <stdio.h>, <stdlib.h>, or <string.h>.
Build failures were observed when adding a structured PCD to
CryptoPkg. CryptoPkg contains <stdio.h>, <stdlib.h>, and
<string.h> in the path CryptoPkg/Library/Include to support
building Open SSL. The Library/Include path is listed as a
private include path in CryptoPkg.dec. Without this change, the
standard include files designed to support build OpenSLL are
used to build the structured PCD C application, and that build
fails.
Other packages that provide a standard C lib or a gasket for
a subset of the standard C lib will run into this same issue
if they also define and use a Structured PCD. So this issue
is not limited to the CryptoPkg.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The "--function-context" ("-W") option of git-diff displays the entire
body of a modified function, not just small modified hunks within the
function. It is useful for reviewers when the code changes to the function
are small, but they could affect, or depend on, control flow that is far
away in the same function.
Of course, the size of the displayed context can be controlled with the
"-U" option anyway, but such fixed-size contexts are usually either too
small, or too large, in the above scenario.
It turns out that "--function-context" does not work correctly for C
source files in edk2. In particular, labels for the goto instruction
(which the edk2 coding style places in the leftmost column) appear to
terminate "--function-context".
The "git" utility contains built-in hunk header patterns for the C and C++
languages. However, they do not take effect in edk2 because we don't
explicitly assign the "cpp" git-diff driver to our C files. The
gitattributes(5) manual explains that this is required:
> There are a few built-in patterns to make this easier, and
> tex is one of them, so you do not have to write the above in
> your configuration file (you still need to enable this with
> the attribute mechanism, via .gitattributes). The following
> built in patterns are available:
>
> [...]
>
> * cpp suitable for source code in the C and C++
> languages.
The key statement is the one in parentheses.
Grab the suffix lists from the [C-Code-File] and [Acpi-Table-Code-File]
sections of "BaseTools/Conf/build_rule.template", add "*.h" and "*.H", and
mark those as belonging to the "cpp" git-diff driver.
This change has a dramatic effect on the following command, for example:
$ git show -W 2ef0c27cb8
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200120094245.9010-1-lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2484https://bugzilla.tianocore.org/show_bug.cgi?id=2485
Update PatchCheck to not enforce no tabs and not enforce CR/LF
line endings for .gitmodules files. These files are updated by
git when a git submodule command is used and the updates by git
use tab characters and LF line endings.
Also update patch check to not enforce CR/LF line endings for
patch lines that create a submodule directory. These patch
lines use LF line endings. The git submodule directory is
added as a new file with attributes 160000 that can be detected
by looking for the pattern "new file mode 160000".
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2451
If removing a header file from source code and file
system, the incremental build will fail.
This patch is to fix this issue by setting each header file
as a target without any actions in makefile.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2406
* Always print subject line after the git commit id to make
it easier to know the context of warnings or errors.
* Allow UTF-8 characters in subject line
* Error if subject line length > 75 without CVE-xxx-xxxxx present
* Error if subject line length > 92 with CVE-xxxx-xxxxx present
* If body line length is > 75, then print warning instead of error.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2455
BuildOption is used by TargetTxtClassObj.py
GenFdsOption is used by GenFds.py
When the GenFds tool is used alone (e.g. python3 -m GenFds.GenFds -h)
With the OptionParser function, the first detected function
prints the help message
import TargetTxtClassObj to GenFds,
The BuildOption will be executed and replace GenFdsOption
We removed all objects associated with this problem that
were created directly during the import process
(e.g. BuildOption, BuildTarget = MyOptionParser(),
TargetTxt = TargetTxtDict())
The Patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2087
In CryptHkdf.c line 42
EVP_PKEY_CTX *pHkdfCtx;
Variable pHkdfCtx begins with lower case 'p',
which should be acceptable because it it is a pointer.
(Refer to CCS_2_1_Draft, 4.3.3.3)
So ECC tool should be improved to handle issues like this.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
To avoid patches committed with incorrect email address,
use the EmailAddressCheck class on the author email too.
Example:
$ python BaseTools/Scripts/PatchCheck.py 1a04951309
Checking git commit: 1a04951309
The 'Author' email address is not valid:
* The email address cannot contain a space: /o=Intel/ou=External \
(FYDIBOHF25SPDLT)/cn=Recipients/cn=fe425ca7e5f4401abed22b904fe5d964
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
We are checking different emails from the signature list. We are
going to check more. To be able to differency, add a description
field, so the error reported is clearer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
To avoid patches committed with incorrect email address,
use the EmailAddressCheck class on the committer email too.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
As we are going to reuse this code out of the CommitMessageCheck
class, extract it in a new class: EmailAddressCheck.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=113
Strip the trailing characters before checking the subject line is
less than 72 characters.
Fixes: e61406708c
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
If git finds a '\r' character in the message, then it
converts the entire message content into Quoted-Printable
encoding. It appears that when groups.io converts the QP
encoding back to text format, the '\r' characters somehow
become '\n'. To workaround this, the SetupGit.py script
will now explicitly set the sendemail.transferEncoding git
config option to '8bit'
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This issue happens under two conditions.
1. Unicode language environment in Windows
2. Python2 (Not reproducible with Python3)
Step to reproduce
C:\edk2>edksetup.bat forcerebuild
The edksetup.bat stuck at 'nmake cleanall'.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
In patch set 13c5e34a - 0c3e8e99, we implemented incremental build with
using compiler/pre-processor generate dependent header file function.
A issue is found for MSVC compiler, that the cl.exe /showIncludes
build option generate header file list to either stdout or stderr.
For .c file, the header file list is print out to stdout while for
.vfr, .aslc and .nasm file, the file list is print out to stderr.
The build tool use two threads to process the message from stdout and
stderr, but to generate correct *.deps file, build tool need to
combine the header file list from stderr and other messages from stdout
together with correct time sequence order.
So this patch is trying to combine the stdout and stderr together for
the process which is for calling make program.
The impact of this patch is that the output message of build with -q
will be changed. The compiler error message will not print out.
The build behavior of other log level setting will not be impacted.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2423
That commit 13c5e34a1b introduces the first two UTF-8
characters (the quote ') in an otherwise all-ascii file.
In Conf\tools_def.template
There is tow lines of
Notes: Since this tool chain is obsolete, it doesn't enable
the compiler option for included header file list generation,
we replaces the two offending quotes by proper ascii quotes
The patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2371
This patch is to fix a regression issue that build fails
if multiple build targets given.
Two changes cause this regression issue.
One is AutoGen object __hash__ function only
hash file path and arch, missing ToolChain and build target.
The other is changing the multiple-thread-genfds function as default
build behavior. To generate the genffs command to Makefile, there
is a global data set is used, GenFdsGlobalVariable, which cause build
tool use the data of first build-target build in
the second build-target build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Redesign the binary cache and not need to save the
cache intermediate result and state in memory as a
ModuleBuildCacheIR class instance. So remove the
CacheIR.py which define the ModuleBuildCacheIR class.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Redesign the binary cache and bases on the compiler to
output the dependency header files info for every module.
The binary cache will directly consume the dependency header
files info and doesn't parse the C source code by iteself.
Also redesign the dependency files list format for module
and try to share the common lib hash result as more as
possible in local process. Remove the unnecessary share data
access across multiprocessing.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Enhance the CacheCopyFile method arg names to be more
clear and readable
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Binary cache use the OutputFile method to return the module
built output files needed to store in cache, but current
OutputFile implementation doesn't return complete output files.
Enhance the OutputFile method to return more complete output files.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Include dependency file in Makefile to enhance
incremental build
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Enable the dependent files generation function for compilers
and Trim tool.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Implement the function in Trim tool to get the included
file list for ASL and ASM file.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Add /showIncludes for msvc and -MMD -MF $@.deps
for GCC and CLANG
Remove /MP for msvc since /MP does not work with
/showIncludes
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2304
The following statement produces a SyntaxWarning with Python 3.8:
if str(FdRegion.RegionType) is 'FILE' and self.Platform.VpdToolGuid in \
str(FdRegion.RegionDataList):
BaseTools/Source/Python/AutoGen/WorkspaceAutoGen.py:168: SyntaxWarning: \
"is" with a literal. Did you mean "=="?
Change the 'is' operator by the conventional '==' comparator.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2400
In Dsc Parser, included dsc file is parsed always no matter
if its condition is False
gUefiOvmfPkgTokenSpaceGuid.test1|FALSE
!if gUefiOvmfPkgTokenSpaceGuid.test1 == FALSE
!include OvmfPkg/test1.dsc
!else
!include OvmfPkg/test2.dsc
!endif
The patch avoids processing redundant dsc files and improves
the way Tool handles them.
In the above case, since the conditional result is FALSE,
"test2.dsc" is not parsed.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Konstantin Aladyshev
Jason1 Lin
Li, Yi1
Chen, Christine
Jeff Brasen
Feng, Bob C
Rebecca Cran
Ni, Ray
Gerd Hoffmann
Jake Garver
Jake Garver via groups.io
Michael Kubacki
wenyi,xie via groups.io
Huang, Li-Xia
Jason
Wei6 Xu
Chen, Lin Z
Huang, Long1
Jiang, Xiaolu
Michael D Kinney
Heinrich Schuchardt
Pierre Gondois
Rebecca Cran
Etienne Carriere
Cole
Christopher Zurcher
Sunil V L
gaoliming
Garrett Kirkendall
Daniel Schaefer
Sughosh Ganu
Bret Barkelew
Yunhua Feng
Matthew Carlson
Kun Qin
Liu, WeiX C
Enze Zhu
Irene Park
Sami Mujawar
Mingyue Liang
Abner Chang
Nikita
Matthew Carlson
Liming Gao
Leif Lindholm
Jiang, Guomin
Feng, YunhuaX
Liu, Zhiguang
Shenglei Zhang
Oleksiy Yakovlev
Sean Brogan
Fan, Zhiju
Vitaly Cheptsov
Steven
Philippe Mathieu-Daude
Laszlo Ersek
Li, Aaron
Desimone, Nathaniel L
Park, Aiden