REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4347
To put UiApp.inf and BootManagerMenuApp.inf to proper FV(BDSFV)
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
After moving BDS driver to a new FV for universal UEFI payload,
the shell boot option path is not correct since it used the BDS
FV instead of DXE FV in its device path.
This patch would find the correct FV by reading shell file.
It also removed PcdShellFile by using gUefiShellFileGuid.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Mike Maslenkin <mike.maslenkin@gmail.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4427
1. Since UART speed is slower than CPU, BIOS need to check the write
buffer is empty, to avoid overwrite the buffer content.
2. LPSS UART might disable MMIO space for Windows debug usage during
ExitBootServices event. BIOS need to avoid access the MMIO space
after ExitBootServices.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
UefiPayloadPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4241
Since UefiPayloadPkg had supported multiple firmware volume,
remove the platform specific logic via protocol
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4264
Fix debug print error level hob not save correct DebugPrintErrorlevel
Should cover the case:
Header.Length == UNIVERSAL_PAYLOAD_SIZEOF_THROUGH_FIELD ()
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Ning Feng <ning.feng@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Add condition to return success if mUartCount is greater
than zero in SerialPortInitialize() to avoid filling mUartInfo
with the same hob data when SerialPortInitialize() is called
multiple times. Also add proper conditions in SerialPortRead
function to read the data properly from multiple UART's.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Kavya <k.kavyax.sravanthi@intel.com>
Add new Serial port library instance that consumes the HOB defined
in MdeModulePkg/Include/UniversalPayload/SerialPortInfo.h to support
multiple UART's.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Kavya <k.kavyax.sravanthi@intel.com>
Return PciRootBridges instead of NULL and set
PcdPciDisableBusEnumeration to FALSE when
root bridge count is zero.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Kavya <k.kavyax.sravanthi@intel.com>
Add a macro called BOOTSPLASH_IMAGE, which when enabled, will
display a logo at boot time.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Writes TianoCore debug logs into the CBMEM console ringbuffer, from
where the user can retrieve them with the `cbmem` userspace utility.
The intention is to aid in debugging non-fatal issues even in release
builds, or simply make TianoCore's logs available to those interested.
Consequently, MDEPKG_NDEBUG must be masked. As an in-memory debug
logging library, ASSERTs must be non-fatal to be seen, so they neither
dead-loop nor create a breakpoint. It is assumed that ASSERT() neither
enforces fatal conditions nor security integrity, as release builds do
not call DebugAssert() from the ASSERT macro.
More detailed debug logs are produced with the DEBUG_CODE macro, but
this guards other debug-related code throughout the codebase. To avoid
changing behaviour on release builds, this is only set for debug builds.
Tested on QEMU, dumping the appropriate memory region in the UEFI shell
shows the TianoCore log. An improved revision of the debug library used
in several coreboot-related EDK2 forks, including MrChromebox's.
Previous revisions also tested on an Acer Aspire VN7-572G laptop.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Add 4 spaces before the boot prompt "F2 or Down..." so that the
spacing is equadistant from the top, which is spaced with a `\n`,
and the left.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Some ConIn or ConOut device may not in the first root bridge, so connect all
root bridge before detect ConIn and ConOut device.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Current code follow some rules to check if the PCI device connected to a
serial port device, but some platform or hardware doesn't follow such rule.
By locating gEfiSerialIoProtocolGuid protocol, we can find the related
device path.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
A little overdesign about VisitAllPciInstances function, since there are
two call back functions. Simplify the code logic by combining the two call
back functions, and unused parameters.
Change the PROTOCOL_INSTANCE_CALLBACK to SIMPLE_PROTOCOL_INSTANCE_CALLBACK
because the former is also defined in OvmfPkg. Rename it to avoid confusion.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Don't assume a 64bit register always holds an address greater than 4GB.
Check the value in the register and decide which Aperature it should be
assigned to.
Fixes assertion
"ASSERT [PciHostBridgeDxe] Bridge->MemAbove4G.Base >= 0x0000000100000000ULL".
Tested with coreboot as bootloader on platforms that have PCI resource
above 4GiB and on platforms that don't have resource above 4GiB.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
It consumes the HOB defined in
UefiPayloadPkg/Include/Guid/DebugPrintErrorLevel.h, and allow bootloader
to config DebugPrintErrorLevel.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
This fixes an issue where the framebuffer provided by coreboot or
slimbootloader will only work on the primary VGA device. If the
framebuffer corresponds to a different device the screen will stay black.
In addition, the code doesn't work for multiple graphic cards, has
reference to non existing functions, and is a duplication of common code.
Call EfiBootManagerConnectVideoController on every display device found,
not only the legacy VGA device. This is the same as OvmfPkg does.
Allows to display output on the framebuffer set up by firmware, which might
not be the VGA device.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
On modern platforms with TBT devices the coreboot resource allocator
opens large PCI bridge MMIO windows above 4GiB to place hotplugable
PCI BARs there as they won't fit below 4GiB. In addition modern
GPGPU devices have very big PCI bars that doesn't fit below 4GiB.
The PciHostBridgeLib made lots of assumptions about the coreboot
resource allocator that were not verified at runtime and are no
longer true.
Remove all of the 'coreboot specific' code and implement the same
logic as OvmfPkg's ScanForRootBridges.
Fixes assertion
"ASSERT [PciHostBridgeDxe] Bridge->Mem.Limit < 0x0000000100000000ULL".
Tested with coreboot as bootloader on platforms that have PCI resources
above 4GiB and on platforms that don't have resources above 4GiB.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Provide a build option to use [Esc] instead of [F2] for devices
such as Chromebooks that don't have F-keys.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
The library PciSegmentInfoLibAcpiBoardInfo consumes the Guid gUefiAcpiBoardInfoGuid.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the UefiPayloadPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
SystemTableInfo GUID is not a Spec defined GUID.
The latest SBL and CBL produces ACPI and SMBIOS table information.
So removing the SystemTableInfo GUID implementation.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Thiyagu Kesavan Balakrishnan <thiyagux.kesavan.balakrishnan@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
This library provides FlashDeviceLib APIs based on
SpiFlashLib and consumed by FVB driver.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This is a common SPI Flash library used for the Intel platform that
supports SPI hardware sequence. This library provides actual SPI flash
operation via Intel PCH SPI controller.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
V2: Fix more header files on #ifdef variable
ECC reported some issues on UefiPayloadPkg, this patch fixed
most of them except several files including ElfLib\Elf32.h,
coreboot.h, CbParseLib.c, etc.
It also removed unused functions in ResetSystemLib and Hob.c.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Fixes simple typo, no behavioral change.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
V2: Fix GCC build issue.
There is typo in previous change caused coreboot build failure.
This patch fixed the build issue.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Current UefiPayloadPkg can suport PCI root bridge info HOB
provided by bootloader. For UniversalPayload, bootloader can
directly provide this HOB for payload consumption. However,
for legacy UEFI payload, it is required to migrate the HOB
information from bootloader HOB space to UEFI payload HOB
space. This patch added the missing part for the bootloader
ParseLib in order to support both legacy and universal UEFI
payload.
This patch was tested on Slim Bootloader with latest UEFI
payload, and it worked as expected.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Remove asm code used for payload entry.
Use patchable PCD instead a fixed PCD PcdPayloadStackTop to avoid
potential conflict.
Based on the removal, use same HobLib regardless UNIVERSAL_PAYLOAD.
Use same PlatformHookLib regardless UNIVERSAL_PAYLOAD. The original
PlatformHookLib was removed and UniversalPayloadPlatformHookLib was
rename to new PlatformHookLib.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The Library constructor is only used for library dependency.
So use a dummy function to make it clear instead of using an
actual function.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
V1: Add quotes when using $(ARCH) in .dsc and .fdf file.
The quotes are added due to the way by which Core ci parse the .dsc file.
Add UINTN in Hob.c to fix cast from pointer to integer of different size error.
V2: Delete lines which reference ShellBinPkg.The pkg doesn't exist in edk2.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Define some PCDs as DynamicEX PCD to be used as global variable.
Because PcdUartDefaultBaudRate is defined as DynamicEX, remove the code
to set it in platformlib. That code was actually redundant.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Consume the BootManagerMenuFile HOB in PlatformBootManagerLib
This Lib is in UefiPayloadPkg
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Update the function defination of HobConstructor to align the Phit Hob
structure.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add a new separate PlatformHookLib for Universal Payload to consume Guid
Hob gUniversalPayloadSerialPortInfoGuid to get serial port information
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
For payload entry, use PayloadEntryHobLib as HobLib and payload entry
should initialize hob base.
For DxeCore, use new added DxeHobLib as HobLib, and DxeCore will
initialize hob base.
For Dxe Driver, use new added DxeHobLib as HobLib, and use DxeHobListLib
to initialize hob base.
Adding a new library DxeHobLib + DxeHobListLib instead of using the
DxeHobLib.inf in MdePkg is because the constructor needed be separated
from DxeHobLib.
If not, when building UefiPayloadPkg, the dependency chain is as below:
DebugLib -> SerialPortLib -> PlatformHookLib -> HobLib -> DebugLib
Each library has a constructor, and this becomes a constructor circle.
To break the circle, separate the constructor from the HobLib as a new
DxeHobListLib, which won't depend on DebugLib.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
UefiPayload parse gUniversalPayloadPciRootBridgeInfoGuid Guid Hob to
retrieve PCI root bridges information.
gUniversalPayloadPciRootBridgeInfoGuid Guid Hob should be created by
Bootloader.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Currently, BDS driver will link a PlatformBootManagerLib, which contains
platform specific logic. This patch get the platform specific logic from
a protocol, so that platform logic for Boot manager can be in another
binary.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Currently the console is connected before EndOfDxe causing OptionsROMs
to be loaded, but their drivers aren't used and thus no GOP is installed.
To make use of 3rdparty OptionROMs connect the console after EndOfDxe.
Tested on Intel CFL board using Nvidia Quadro GPU.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3100
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Today's UefiPayloadPkg always uses 0xE0000000 as the PCIE base address
and ignores the value set in AcpiBoardInfo HOB created by the boot
loader. This makes the payload binary cannot work in environment
where the PCIE base address set by boot loader doesn't equal to
0xE0000000.
The patch enhances UefiPayloadPkg so that the PCIE base address
set by boot loader in the AcpiBoardInfo HOB is used.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Add PS2 keyboard support.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2316
This patch adds PS2 keyboard support in boot manager, and
add a build flag PS2_KEYBOARD_ENABLE for PS2 keyboard to
build PS2 keyboard driver and SIO driver. Be default the
build flag is not enabled since PS2 keyboard is not common
used. could use -DPS2_KEYBOARD_ENABLE to enable build it
if need this feature.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
EDKII_SERIAL_PORT_LIB_VENDOR_GUID is now defined in MdeModulePkg,
simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-5-anthony.perard@citrix.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups
On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt
Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
MarsX Lin
Guo Dong
PaytonX Hsieh
Rebecca Cran
Ning Feng
Kavya
James Lu
Sean Rhodes
Benjamin Doron
Liu, Zhiguang
Lean Sheng Tan
Xie, Yuanhao
Patrick Rudolph
Michael Kubacki
Michael D Kinney
Kesavan Balakrishnan, ThiyaguX
Ma, Maurice
duntan
Ray Ni
Ard Biesheuvel
Dong, Guo
Anthony PERARD