BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
When starting APs in an SMP configuration, the AP needs to know if it is
running as an SEV-ES guest in order to assign a GHCB page.
Add a field to the CPU_MP_DATA structure that will indicate if SEV-ES is
enabled. This new field is set during MP library initialization with the
PCD value PcdSevEsIsEnabled. This flag can then be used to determine if
SEV-ES is enabled.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2632
Both PEI and DXE instances of the MpInitLib are using PcdLib APIs, but
none of them list the dependency of the PcdLib in INF & header files.
This commit will explicitly add such dependency in .H and .INF files.
Test done:
Library level build pass for VS2015x86 tool chain
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2627
The commit will introduce a static PCD to specify the periodic interval
for checking the AP status when MP services StartupAllAPs() and
StartupThisAP() are being executed in a non-blocking manner. Or in other
words, specifies the interval for callback function CheckApsStatus().
The purpose is to provide the platform owners with the ability to choose
the proper interval value to trigger CheckApsStatus() according to:
A) The number of processors in the system;
B) How MP services (StartupAllAPs & StartupThisAP) being used.
Setting the PCD to a small value means the AP status check callback will
be triggered more frequently, it can benefit the performance for the case
when the BSP uses WaitForEvent() or uses CheckEvent() in a loop to wait
for AP(s) to complete the task, especially when the task can be finished
considerably fast on AP(s).
An example is within function CpuFeaturesInitialize() under
UefiCpuPkg/Library/RegisterCpuFeaturesLib/DxeRegisterCpuFeaturesLib.c,
where BSP will perform the same task with APs and requires all the
processors to finish the task before BSP proceeds to its next task.
Setting the PCD to a big value, on the other hand, can reduce the impact
on BSP by the time being consumed in CheckApsStatus(), especially when the
number of processors is huge so that the time consumed in CheckApsStatus()
is not negligible.
The type of the PCD is UINT32, which means the maximum possible interval
value can be set to:
4,294,967,295 microseconds = 4,295 seconds = 71.58 minutes = 1.19 hours
which should be sufficient for usage.
For least impact, the default value of the new PCD will be the same with
the current interval value. It will be set to 100,000 microseconds, which
is 100 milliseconds.
Unitest done:
A) OS boot successfully;
B) Use debug message to confirm the 'TriggerTime' parameter for the
'SetTimer' service is the same before & after this patch.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brian J. Johnson <brian.johnson@hpe.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit c7c964b and dd01704 add header file for FIT table and update
MpInitLib to support FIT based microcode shadow operation. There are
comments that FIT is Intel specific specification instead of industry
standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
So this patch adds a platform PPI for the microcode shadow logic, and
remove the FIT related code from EDK2.
The FIT based microcode shadow support will be implemented as a new
platform PEIM in IntelSiliconPkg in edk2-platforms.
This patch doesn't provide a DXE version shadow microcode protocol,
a platform which only uses DxeMpInitLib instance only supports PCD
based microcode shadowing.
A detailed design doc can be found here:
https://edk2.groups.io/g/devel/files/Designs/2020/0214/Support%20
the%202nd%20Microcode%20FV%20Flash%20Region.pdf
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2465
Commit 89164babec:
UefiCpuPkg/MpInitLib: don't shadow the microcode patch twice.
attempted to use 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
fields to avoid loading the microcode patches data into memory again in
the DXE phase.
However, the CPU_MP_DATA structure has members with type 'UINTN' or
pointer before the microcode patch related fields. This may cause issues
when PEI and DXE are of different archs (e.g. PEI - IA32, DXE - x64),
since the microcode patch related fields will have different offsets in
the CPU_MP_DATA structure.
Commit 88bd066166:
UefiCpuPkg/MpInitLib: Relocate microcode patch fields in CPU_MP_DATA
tried to resolve the above-mentioned issue by relocating the fields
'MicrocodePatchRegionSize' and 'MicrocodePatchAddress' before members with
different size between different archs. But it failed to take the case of
pre-built binaries (e.g. FSP) into consideration.
Binaries can be built when the code base had a different version of the
CPU_MP_DATA structure definition. This may cause issues when accessing
these microcode patch related fields, since their offsets are different
(between PEI phase in the binaries and DXE phase in current code
implementation).
This commit will use the newly introduced EDKII microcode patch HOB
instead for the DXE phase to get the information of the loaded microcode
patches data done in the PEI phase. And the 'MicrocodePatchRegionSize' and
'MicrocodePatchAddress' fields in CPU_MP_DATA will not be used to pass
information between phases.
For pre-built binaries, they can be classified into 3 types with regard to
the time when they are being built:
A. Before commit 89164babec
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
were not being used to skip microcode load in DXE)
For this case, the EDKII microcode patch HOB will not be produced. This
commit will load the microcode patches data again in DXE. Such behavior is
the same with the code base back then.
B. After commit 89164babec, before commit e1ed55738e
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
being used to skip microcode load in DXE, but failed to work properly
between differnt archs.)
For this case, the EDKII microcode patch HOB will not be produced as well.
This commit will also load the microcode patches data again in DXE.
But since commit 89164babec failed to keep the detection and application
of microcode patches working properly in DXE after skipping the load, we
fall back to the origin behavior (that is to load the microcode patches
data again in DXE).
C. After commit e1ed55738e
(In other words, EDKII microcode patch HOB will be produced.)
For this case, it will have the same behavior with the BIOS built from
the current source codes.
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The existing MpInitLib will shadow the microcode update patches from
flash to memory and this is done by searching microcode region specified
by PCD PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize.
This brings a limition to platform FW that all the microcode patches must
be placed in one continuous flash space.
This patch shadows microcode update according to FIT microcode entries if
it's present, otherwise it will fallback to original logic (by PCD).
A new featured PCD gUefiCpuPkgTokenSpaceGuid.PcdCpuShadowMicrocodeByFit
is added for enabling/disabling this support.
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
- If a platform boots such that the boot CPU count is smaller than
PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
AP detection" logic added in commit 6e1987f19a. (Which has been
documented as a subset of use case (2) in the previous patch.)
Said logic depends on the boot CPU count being equal to
PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
platform either has to wait too long, or risk missing APs due to an
early timeout.
- The platform may not be able to use the variant added in commit
0594ec417c either. (Which has been documented as use case (1) in the
previous patch.)
See commit 861218740d. When OVMF runs on QEMU/KVM, APs may check in
with the BSP in arbitrary order, plus the individual AP may take
arbitrarily long to check-in. If "NumApsExecuting" falls to zero
mid-enumeration, APs will be missed.
Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
AP has its own stack for code execution. If PcdCpuStackGuard is enabled,
the page at the bottom of stack of AP will be disabled (NOT PRESENT) to
monitor the stack overflow issue. This requires PcdCpuApStackSize to be
set with value more than one page of memory.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
We need to disable system timer interrup to avoid generating the pending
interrupt on the old BSP.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The current DxeDebugAgentLib supports source debugging on AP function. This
update is to update DxeMpInitLib to consume Debug Agent Library by
DEBUG_AGENT_INIT_DXE_AP flag. Thus, we could source debugging AP function
invoked by CPU MP Protocol.
However, current SecPeiDebugAgentLib does not support source debugging on AP
function invoked by CPU MP PPI. I have submitted one bugzilla to add this
support at https://bugzilla.tianocore.org/show_bug.cgi?id=308.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Currently, DxeMpLib only places APs into specified c-state in Exit Boot Service
callback function for UEFI OS boot. We need to put APs into specified c-state
for legacy OS boot also.
https://bugzilla.tianocore.org/show_bug.cgi?id=210
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add assembly code for AP reset vector and the definition of MP_CPU_EXCHANGE_INFO
that are used to exchange the data between C code and assembly code when AP wake
up.
v4:
1. Copy MP_CPU_EXCHANGE_INFO from UefiCpuPkg/CpuMpPei/CpuMpPei.h
2. Copy MpEqu.inc and MpFuncs.nasm from UefiCpuPkg/CpuMpPei.
v3:
1. Rename NumApsExecutingLoction to NumApsExecutingLocation
2. Add whitespace after ; in .nasm file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add two MP Initialize Library instances PeiMpInitLib.inf and DxeMpInitLib.inf
with NULL implementation.
One PeiMpInitLib.inf is consumed by PEI MP driver. Another DxeMpInitLib.inf is
consumed by DXE MP driver.
Place MpInitLibStartupAllAPs()/MpInitLibStartupThisAp()/MpInitLibSwitchBSP()/
MpInitLibEnableDisableAP() into PeiMpLib.c and DxeMpLib.c, because they have
the different implementations and will be updated in latter patches.
v5:
1. Add back PeiExceptionHandlerLib.inf in UefiCpuPkg.dsc. It is removed
incorrectly.
v4:
1. Return EFI_UNSUPPORTED instead of EFI_SUCCESS for NULL implementation of
all Functions.
2. Sync MpInitLibxxx functions header updating described in v4 part of Patch
#4.
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Tom Lendacky
Hao A Wu
Siyuan Fu
Laszlo Ersek
Michael D Kinney
Jian J Wang
Liming Gao
Jeff Fan