BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4504
The BaseRngLibTimerLib allows to generate number based on a timer.
This mechanism allows to have a basic non-secure implementation
for non-production platforms.
To bind and identify Random Number Generators implementations with
a GUID, an unsafe GUID should be added. This GUID cannot be added
to the MdePkg unless it is also added to a specification.
To keep the MdePkg self-contained, copy the BaseRngLibTimerLib to
the MdeModulePkg. This will allow to define an unsafe Rng GUID
in a later patch in the MdeModulePkg.
The MdePkg implementation will be removed later. This allows to give
some time to platform owners to switch to the MdeModulePkg
implementation.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
The qemu/kvm SMM emulation uses the AMD SaveState layout.
So, now that we have AMD SaveState support merged we can just use
Amd/SmramSaveStateMap.h, QemuSmramSaveStateMap.h is not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add DetectAndPreparePlatformVirtioDevicePath() helper function
to setup virtio-mmio devices. Start with virtio-serial support.
This makes virtio console usable with microvm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
This reverts commit 173a7a7daa
Fixes https://bugzilla.tianocore.org/show_bug.cgi?id=4528
The build.sh qemu option starts the correct qemu executable for the
selected architecture (build.sh -a option, or implicit) and uses the
correct previously built OVMF image for the selected architecture and
build target (build.sh -b option, or implicit).
With this revert, the above step will fail if there is no matching
previously built OVMF image. This is advantageous over rebuilding each
time the build.sh qemu option is used (as in the reverted commit),
because it provides a quick way to run a just-built OVMF image in place,
while:
a) Starting immediately (saving the time required for a rebuild on each
usage, if the VM is started multiple times)
b) Preserving the NVRAM contents between multiple runs (i.e. until the
image is next rebuilt)
Signed-off-by: Mike Beaton <mjsbeaton@gmail.com>
The Hii form is named "MainFormState" while the EFI variable is named
"PlatformConfig". This discrepancy in names causes the following SCT
cases to fail on RiscVVirtQemu:
ExtractConfigConformance
ExtractConfigFunction
ExtractConfig_Func
Previous commit 16acacf addressed two of these issues, and this patch
fixes the remaining one.
Signed-off-by: Yin Wang <yin.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Booting an SEV guest with AmdSev OVMF package currently triggers the
following assertion with QEMU:
InstallQemuFwCfgTables: installed 7 tables
PcRtc: Write 0x20 to CMOS location 0x32
[Variable]END_OF_DXE is signaled
Initialize variable error flag (FF)
ASSERT_EFI_ERROR (Status = Not Found)
ASSERT [BdsDxe] /home/VT_BUILD/ovmf/OvmfPkg/Library/PlatformBootManagerLib/BdsPlatform.c(1711): !(((INTN)(RETURN_STATUS)(Status)) < 0)
This seems to be due to commit 81dc0d8b4c, which switched to using
PlatformBootManagerLib instead of PlatformBootManagerLibGrub. That pulls
in a dependency on gEfiS3SaveStateProtocolGuid provider being available
(which is asserted for in
BdsPlatform.c:PlatformBootManagerBeforeConsole()/SaveS3BootScript()),
but the libraries that provide it aren't currently included in the
build. Add them similarly to what's done for OvmfPkg.
Fixes: 81dc0d8b4c ("OvmfPkg/AmdSev: stop using PlatformBootManagerLibGrub")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
PcdFirstTimeWakeUpAPsBySipi was recently introduced to indicate when the
full INIT-SIPI-SIPI sequence can be skipped for AP bringup. It is true
by default, but needs to be disabled for QEMU/OVMF where early INIT is
not simulated. Commit 1d76560146 ("OvmfPkg: Disable
PcdFirstTimeWakeUpAPsBySipi.") added changes to disable it by default
for OvmfPkg, but a similar change was not made for the AmdSev package.
This breaks booting of SEV and SNP guests.
Fix this defaulting PcdFirstTimeWakeUpAPsBySipi to false for AmdSev
package, as was previously done for OvmfPkg variants.
Fixes: eaffa1d7ff ("UefiCpuPkg:Wake up APs after power-up or RESET through SIPI.")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of relying on raising the TPL to protect the critical sections
that manipulate the global bitmask that keeps track of bounce buffer
allocations, use compare-and-exchange to manage the global variable, and
tweak the logic to line up with that.
Given that IoMmuDxe implements a singleton protocol that is shared
between multiple drivers, and considering the elaborate and confusing
requirements in the UEFP spec regarding TPL levels at which protocol
methods may be invoked, not relying on TPL levels at all is a more
robust approach in this case.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2211060
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Pedro Falcato <pedro.falcato@gmail.com>
Disable PcdFirstTimeWakeUpAPsBySipi for IntelTdx, Microvm, and Xen to
preserve the original execution of INIT-SIPI-SIPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The block size configuration of Blockmap does not match that in Qemu
VirtNorFlash, which causes variable data to be written into FtwWorkBlock
by mistake, resulting in data loss during reboot. Fix it and update
new checksum value.
Signed-off-by: Qingyu Shang <2931013282@sjtu.edu.cn>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Copy the function BuildPlatformInfoHob() from OvmfPkg/PlatformPei.
QemuFwCfgLib expect this HOB to be present, or fails to do anything.
InternalQemuFwCfgIsAvailable() from QemuFwCfgPeiLib module will not
check if the HOB is actually present for example and try to use a NULL
pointer.
Fixes: cda98df162 ("OvmfPkg/QemuFwCfgLib: remove mQemuFwCfgSupported + mQemuFwCfgDmaSupported")
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Disable PcdFirstTimeWakeUpAPsBySipi for OVMF to let BSP wake up APs by
INIT-SIPI-SIPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Increase the chance that CI finds bugs in MP changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit f92a9dce10)
Reapplying, since the CI (Windows and Linux) use Qemu 8 now, which works
with SMP again.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4324
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
[ardb: use single-threaded TCG for SMM]
This reverts commit 3beb8c9654.
Both Windows and Linux CI jobs are now using Qemu 8, this workaround is
no longer needed.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4324
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Bump the version of the Qemu chocolatey package up to 2023.7.25.
The Linux CI is already using Qemu 8.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4324
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Update the README with instruction to build using CLANGDWARF
toolchain.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # Debian clang version 14.0.6
llvm fails to resolve _ModuleEntry when these extra directives are
present. ASM_FUNC already takes care what is required.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # Debian clang version 14.0.6
Use auto alignment and FIXED FFS attribute for XIP modules similar
to [1]. Without this change, the CLANGDWARF toolchain will fail to
build with below error.
GenFfs: ERROR 1000: Unknown option
SectionAlign option must be specified with section file.
[1] - 7669f73498
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # Debian clang version 14.0.6
bhyve supports adding a ROM to PCI devices. It was added to support GPU
passthrough of dedicated AMD GPUs. At the moment, this ROM file is
mostly useless as it's not shadowed and executed by firmware. Change
that by enabling bus enumeration.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
We like to enable bus enumeration for bhyve. Therefore, this patch needs
to be reverted.
This reverts commit 8c8f886f27.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
We like to enable bus enumartion for bhyve. Therefore, this patch needs
to be reverted.
This reverts commit c2f24ba321.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Print the timeout value set in the PCD variable instead of
hard coded 10 seconds.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
OpenSBI now marks PMP regions with "no-map" attribute.
So, remove the workaround and add the ReservedMemory only
when no-map is set so that it follows DT spec.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Ranbir Singh <rsingh@ventanamicro.com>
Searching for an unused bounce buffer in mReservedMemBitmap and
reserving the buffer by flipping the bit is a critical section
which must not be interrupted. Raise the TPL level to ensure
that.
Without this fix it can happen that IoMmuDxe hands out the same
bounce buffer twice, causing trouble down the road. Seen happening
in practice with VirtioNetDxe setting up the network interface (and
calling into IoMmuDxe from a polling timer callback) in parallel with
Boot Manager doing some disk I/O. An ASSERT() in VirtioNet caught
the buffer inconsistency.
Full story with lots of details and discussions is available here:
https://bugzilla.redhat.com/show_bug.cgi?id=2211060
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SECURE_BOOT_FEATURE_ENABLED was dropped by the commit(92da8a154f), but the
PeilessStartupLib was not updated with PcdSecureBootSupported, that made
SecureBoot no longer work in IntelTdxX64.
Fix this by replacing SECURE_BOOT_FEATURE_ENABLED with
PcdSecureBootSupported in PeilessStartupLib.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
During CpuDxe initialization, MMU will be setup with the highest
mode that HW supports.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
There is no point to set satp to bare mode as that should be the
default mode when booting edk2.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Make sure VirtNorFlashDxe loaded before VariableRuntimeDxe as it
is the backend flash driver.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Normally, DXE driver would add device resource to GCD before start using.
But some key resources such as uart used for printing info at very early
stage.
Those resources should be populated to HOB in SEC phase so they are
added to GCD before MMU enabled.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
The size should be for single region, not the whole firmware FD.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Commit 63c50d3ff2 changed the check that is
used to determine if SEV-ES is active. Originally, a CMP instruction with
a supporting JZ instruction was used for the check. It was changed to use
the BT instruction but not JZ instruction. The result of a BT instruction
changes the the carry flag (CF) and not the zero flag (ZF). As a result,
the wrong condition is being checked. Update the JZ to a JNC to properly
detect if SEV-ES is active.
Fixes: 63c50d3ff2 ("OvmfPkg/ResetVector: cache the SEV status MSR...")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
The effect of LTO is limited with optimization turned off, and blocked
the upgrade of Openssl3.0. We already skipped this build with VS2019,
skip the GCC NOOPT build also.
Signed-off-by: Yi Li <yi1.li@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Remove code that sets AddressEncMask for non-leaf entries when
modifing smm page table by MemEncryptSevLib. In FvbServicesSmm
driver, it calls MemEncryptSevClearMmioPageEncMask to clear
AddressEncMask bit in page table for a specific range. In AMD
SEV feature, this AddressEncMask bit in page table is used to
indicate if the memory is guest private memory or shared memory.
But all memory accessed by the hardware page table walker is
treated as encrypted, regardless of whether the encryption bit
is present. So remove the code to set the EncMask bit for smm
non-leaf entries doesn't impact AMD SEV feature.
The reason encryption mask should not be set for non-leaf
entries is because CpuPageTableLib doesn't consume encryption
mask PCD. In PiSmmCpuDxeSmm module, it will use CpuPageTableLib
to modify smm page table in next patch. The encryption mask is
overlapped with the PageTableBaseAddress field of non-leaf page
table entries. If the encryption mask is set for smm non-leaf
page table entries, issue happens when CpuPageTableLib code
use the non-leaf entry PageTableBaseAddress field with the
encryption mask set to find the next level page table.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The UEFI driver model invokes the supported() method on every driver
every time a connection attempt is made on any handle, and so doing an
unconditional DEBUG() print inside this method produced a lot of noise.
So let's drop this DEBUG() call from the VirtioSerial driver's
Supported() method.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Bhyve will gain support for TPM emulation in the near future. Therefore,
prepare OVMF by copying all TPM driver used by qemu's OVMF DSC into the
bhyve OVMF DSC.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This makes the InstallQemuFwcfgTables function reusable by bhyve.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
This is required to move InstallQemuFwCfgTables into AcpiPlatformLib.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
Bhyve supports providing ACPI tables by FwCfg. Therefore,
InstallQemuFwCfgTables should be moved to AcpiPlatformLib to reuse the
code. As first step, move PciEncoding into AcpiPlatformLib.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
The definition and declaration of GetAcpiRsdpFromMemory doesn't match.
We don't get a compile error yet because UINTN is the same as UINT64 on
64bit machines. As the function works on memory addresses, UINTN is the
correct type of the input parameters.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Add a readme file which provides information regarding how
to build and test EDK2 on RISC-V qemu virt platform.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Currently, RiscVVirtQemu supports unified code and variable store
mainly because only one pflash devices was available in qemu for
EDK2. However, this doesn't allow to map the code part as read-only.
With recent qemu enhancements, it is now possible for EDK2 to make
use of both pflash devices in RISC-V virt machine. So, add support
to create code and vars images separately. This also allows easy
firmware code updates without losing the variable store.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This library is required to support separate code and
variable store images.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The size of the FV and the WriteQueueSize is incorrect which causes
the flash to be re-written during boot. Fix them and update the new
checksum value.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It's much easier to create configuration dependent ACPI tables for bhyve
than for OVMF. For this reason, don't use the statically created ACPI
tables provided by OVMF. Instead, prefer the dynamically created ACPI
tables of bhyve. If bhyve provides no ACPI tables or we are unable to
detect those, fall back to OVMF tables.
Ideally, we use the qemu fwcfg interface to pass the ACPI tables from
bhyve to OVMF. bhyve will support this in the future. However, current
bhyve executables don't support passing ACPI tables by the qemu fwcfg
interface. They just copy the ACPI into main memory. For that reason,
pick up the ACPI tables from main memory.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This makes the function reuseable by bhyve.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Pierre Gondois
Gerd Hoffmann
Joursoir
Mike Beaton
Yin Wang
Roth, Michael via groups.io
Michael Roth
Ard Biesheuvel
YuanhaoXie
Qingyu Shang
Corvin Köhne
Oliver Steffen
Sunil V L
Ceping Sun
Tuan Phan
Tom Lendacky
Yi Li
Abdul Lateef Attar
Dun Tan