Adds a PrEval entry to the package's ci.yaml file which is used to
verify if the package uses a particular library instance when that
library instance file (INF) is updated.
When a library instance file (INF) is updated, PrEval will review each
package's DSC as described in the ci.yaml file to determine if the
package uses said library instance. If the package does use the library
instance, it will be built and tested to ensure the package is not
broken from the change.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Joey Vagedes <joeyvagedes@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
AmlCodeGenRdQWordMemory's and AmlCodeGenRdDWordMemory's Cacheable
and MemoryRangeType parameters treat specific values as having
specific meanings as defined by the spec. This change adds enums to map
those meanings to their corresponding values.
Signed-off-by: Jeshua Smith <jeshuas@nvidia.com>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Adds a CI YAML entry to acknowledge a case where custom strings
contain print specifiers for a single debug macro.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the Arm namespace objects to:
- add Identifier field to IORT nodes.
- introduce enums to represent RMR nodes and Memory Range
descriptors.
- add definition of node type 6 - Reserved Memory Range node.
- add definition for Memory Range Descriptors.
- add PASID capabilities and flags field to Root Complex node.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
To prepare edk2 upstream CI for incoming modifications:
1- Disable the Ecc check 9005:
"Only Doxygen commands '@bug', '@todo', [...], '@{', '@}'
are allowed to mark the code Unknown doxygen command [...]"
2- Disable the Ecc check 8003 for the following keyword:
"DISABLE_NEW_DEPRECATED_INTERFACES"
Indeed, this error has been corrected on the latest version of
BaseTools, but is still triggered when using the older python
packages containing the BaseTools.
3- Add word exceptions for the cspell tool.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Generic ACPI for Arm Components 1.0 Platform Design
Document, s2.6.4 "ASL code examples" provides information
to describe an Arm CoreLink CMN-600 Coherent Mesh Network
using an ASL definition block table.
The SSDT CMN-600 Table Generator uses the Configuration
Manager protocol to obtain the following information about
the CMN-600 device on the platform:
- the PERIPHBASE address location and address range;
- the ROOTNODEBASE address location;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
The CMN-600 mesh is described using the CM_ARM_CMN_600_INFO
and CM_ARM_EXTENDED_INTERRUPT structures in the Configuration
Manager.
The SSDT CMN-600 Table generator:
- gets the CMN-600 hardware information
from the configuration manager.
- uses the AmlLib interfaces to parse the AML
template BLOB and construct an AML tree.
- uses the AmlLib to update:
- the "_UID" value;
- the address location and range of the PERIPHBASE;
- the address location of the ROOTNODEBASE;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
- serializes the AML tree to an output buffer.
This output buffer contains the fixed-up AML code,
which is then installed as an ACPI SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix ECC error 8001 reported errors in AmlDbgPrint.
[8001] Only capital letters are allowed to be used
for #define declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
According to Arm Server Base Boot Requirements,
Platform Design Document version 1.2 revision D,
September 2, 2019, section '4.2.1.8 SPCR'; The
SPCR console device must be included in the DSDT.
Additionally, it is often desirable to describe the
serial ports available on a platform so that they
are available for use by a rich OS.
To facilitate the description of serial ports on a
platform a common SSDT Serial Port Fixup library is
introduced. It provides interfaces to build a SSDT
serial port definition block table based on the
serial port information.
The SSDT Serial Port Fixup library is used by the
SPCR, DBG2 and SSDT Serial Port generator to describe
the serial port information in a definition block.
+------------+ +------------+ +------------+
| SPCR Gen | | DBG2 Gen | | SERIAL Gen |
+------------+ +------------+ +------------+
+----------------------------------+
| SSDT Serial Port Fixup library |
+----------------------------------+
The SSDT Serial Port Fixup library:
- Parses the SSDT Serial Port template using the
AmlLib library to generate an AML tree.
- Updates the _UID, _HID and _CID values.
- Fixes up the Serial port base address, length
and the interrupt number in the _CRS descriptor.
- Fixes up the serial-port name.
- Serialises the AML Tree to a buffer containing
the definition block data.
The definition block data is then installed by the
corresponding table generator.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
ACPI Definition blocks are implemented using AML which has
a complex grammar making run-time generation of definition
blocks difficult. Dynamic AML is a feature of Dynamic Tables
framework that provides a solution for dynamic generation of
ACPI Definition block tables.
Since, AML bytecode represents complex AML grammar, an AmlLib
library is introduced to assist parsing and traversing of the
AML bytecode at run-time.
The AmlLib library parses a definition block and represents it
as an AML tree. The AML objects, methods and data are represented
as tree nodes. Since the AML data is represented as tree nodes,
it is possible to traverse the tree, locate a node and modify the
node data. The tree can then be serialized to a buffer (that
represents the definition block). This definition block containing
the fixed-up AML code can then be installed as an ACPI Definition
Block table.
Dynamic AML introduces the following techniques:
* AML Fixup
* AML Codegen
* AML Fixup + Codegen
AML Fixup is a technique that involves compiling an ASL template
file to generate AML bytecode. This template AML bytecode can be
parsed at run-time and a fixup code can update the required fields
in the AML template.
AML Codegen employs generating small segments of AML code.
AmlLib provides a rich set of APIs to operate on AML data for AML
Fixup and Codegen.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The TianoCore EDKII project has introduced a Core CI infrastructure
using TianoCore EDKII Tools PIP modules:
* https://pypi.org/project/edk2-pytool-library/
* https://pypi.org/project/edk2-pytool-extensions/
The edk2\.pytool\Readme.md provides information to configure the
environment and to run local builds.
This patch defines the necessary settings for enabling the Core CI
builds for DynamicTablesPkg.
- Add DynamicTablesPkg.ci.yaml for Core CI
- Update ReadMe.md for details and instructions
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Joey Vagedes
Jeshua Smith
Michael Kubacki
Sami Mujawar
Pierre Gondois