REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4696
Refer to the [GHCI] spec, TDVF should clear the BIT5 for RBP in the mask.
Reference:
[GHCI]: TDX Guest-Host-Communication Interface v1.5
https://cdrdv2.intel.com/v1/dl/getContent/726792
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
According to UEFI Spec 2.10 page 206, if any EFI_RUNTIME_SERVICES* calls
are not supported for use by the OS at runtime, an EFI_RT_PROPERTIES_TABLE
configuration table should be published describing which runtime services
are supported at runtime. So need to add EFI_UNSUPPORTED return for some
Runtime Service functions.
REF: UEFI spec 2.10 section 8 Services ? Runtime Services
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Suqiang Ren <suqiangx.ren@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding PeiServicesTablePointerLibKs0 for LoongArch64, which provides
setting and getting the PEI service table pointer through the CSR KS0
register.
The idea of this library is derived from
ArmPkg/Library/PeiServicesTablePointerLib/
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add IoCsrRead8, IoCsrRead16, IoCsrRead32, IoCsrRead64, IoCsrWrite8,
IoCsrWrite16, IoCsrWrite32, IoCsrWrite64 to operate the IOCSR registers
of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add CsrRead, CsrWrite and CsrXChg functions for LoongArch, and use them
to operate the CSR register of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add LoongArch AsmCpucfg function and Cpucfg definitions.
Also added Include/Register/LoongArch64/Cpucfg.h to IgnoreFiles of
EccCheck.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding LoongArch local interrupt function set, which is used to control
the opening or closing of the local interrupt when the global interrupt
is enabled.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding SetExceptionBaseAddress and SetTlbRebaseAddress functions
for LoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding InitializeFloatingPointUnits, EnableFloatingPointUnits and
DisableFloatingPointUnits functions for LoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
* Add InitializeFloatingPointUnits() to x86 specific file
* Add GetCpuFamilyModel() to x86 specific file
* Add GetCpuSteppingId() to x86 specific file
* Move StandardSignatureIsAuthenticAMD() to x86 specific file.
* Add CpuLib library class include to all C files.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Qing Huang <qing.huang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Rename the standard functions in the LibFdtSupport to remove conflicts
with other libraries that define them.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
CpuLib.h exposes StandardSignatureIsAuthenticAMD() API and we require
stub function in its BaseCpuLibNull library instance to avoid potential
link issue.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Qing Huang <qing.huang@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Currently the types of casting mismatch with TD MMIO read 1, 2 and 4
bytes, that might introduce potential issues. So fix the types as
conventional MmioRead[8|16|32] does.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
For scene of
HandOffToDxeCore()->SwitchStack(DxeCoreEntryPoint)->
InternalSwitchStack()->LongJump(),Variable HobList.Raw
will be passed (from *Context1 to register a0) to
DxeMain() in parameter *HobStart.
However, meanwhile the function LongJump() overrides
register a0 with a1 (-1) due to commit (ea628f28e5 "RISCV: Fix
InternalLongJump to return correct value"), then cause hang.
Replacing calling LongJump() with new InternalSwitchStackAsm() to pass
addres data in register s0 to register a0 could fix this issue (just
like the solution in MdePkg/Library/BaseLib/AArch64/SwitchStack.S)
Signed-off-by: Yang Wang <wangyang@bosc.ac.cn>
Cc: Bamvor Jian ZHANG <zhangjian@bosc.ac.cn>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ran Wang <wangran@bosc.ac.cn>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
stimecmp is a CSR supported only when Sstc extension is supported by the
platform. This register can be used to set the timer interrupt directly in
S-mode instead of going via SBI call. Add a function to update this
register.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Use newly defined cache management operations for RISC-V where possible
It builds up on the support added for RISC-V cache management
instructions in BaseLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Implement Cache Management Operations (CMO) defined by
RISC-V spec https://github.com/riscv/riscv-CMOs.
Notes:
1. CMO only supports block based Operations. Meaning cache
flush/invd/clean Operations are not available for the entire
range. In that case we fallback on fence.i instructions.
2. Operations are implemented using Opcodes to make them compiler
independent. binutils 2.39+ compilers support CMO instructions.
Test:
1. Ensured correct instructions are refelecting in asm
2. Qemu implements basic support for CMO operations in that it allwos
instructions without exceptions. Verified it works properly in
that sense.
3. SG2042Pkg implements CMO-like instructions. It was verified that
CpuFlushCpuDataCache works fine. This more of less
confirms that framework is alright.
4. TODO: Once Silicon is available with exact instructions, we will
further verify this.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@...>
Reviewed-by: Jingyu Li <jingyu.li01@...>
There are different ways to manage cache on RISC-V Processors.
One way is to use fence instruction. Another way is to use CPU
specific cache management operation instructions ratified as
per RISC-V ISA specifications to be introduced in future
patches. Current method is fence instruction based, rename the
function accordingly to add that clarity.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The declarations for cache Management functions belong to BaseLib
instead of instance source file. This helps with further restructuring
of cache management code for RISC-V.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Simplify IoRead/WriteFifo implement by repeatedly
calling IoRead/Write in the C code.
This can avoid calling assembly code to use string
I/O instructions. With this change Ia32/IoFifo.nasm
and X64/IoFifo.nasm can be removed. Then the source
files for IA32 and X64 are the same.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Change IoLibFifo.c to IoLibFifoCc.c since the
file is for Tdx and SEV in BaseIoLibIntrinsicSev.
It's also to distinguish with a new incoming
IoLibFifo.c for BaseIoLibIntrinsic.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
__builtin_return_address returns a pointer, not a string. Fix
the STACK FAULT message in BaseStackCheckLib appropriately.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4609
The current CalculateCrc16Ansi implementation does the following:
1) Invert the passed checksum
2) Calculate the new checksum by going through data and using the
lookup table
3) Invert it back again
This emulated my design for CalculateCrc32c, where 0 is
passed as the initial checksum, and it inverts in the end.
However, CRC16 does not invert the checksum on input and output.
So this is incorrect.
Fix the problem by not inverting input checksums nor output checksums.
Callers should now pass CRC16ANSI_INIT as the initial value instead of
"0". This is a breaking change.
This problem was found out-of-list when older ext4 filesystems
(that use crc16 checksums) failed to mount with "corruption".
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4572
According to section 3.2 of the [GHCI] spec, if the return status
of MapGPA is "TDG.VP.VMCALL_RETRY", TD must retry this operation
for the pages in the region starting at the GPA specified in R11.
Currently, TDVF has not handled the retry results and always clears
the R11 on unsuccessful return status. For this, the TdVmcall needs
to output the value of R11 on unsuccessful return status to handle
the retry results of MapGPA.
Reference:
[GHCI]: TDX Guest-Host-Communication Interface v1.0
https://cdrdv2.intel.com/v1/dl/getContent/726790
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4555
Add logic that checks if the code doesn't overflow
ACPI_EXTENDED_HID_DEVICE_PATH node when searching for optional
strings. If the string is not provided in the device path node
default value of "\0" is used.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@bysoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Michael D Kinney <Michael.d.kinney@intel.com>
The ARM implementation of InternalLongJump always returned the value
Value - but it is not supposed to ever return 0. Add the test to prevent
that, and return 1 if Value is 0 - as is already present in AArch64.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Both in SetJump and in InternalLongJump, 32-bit w register views were
used for the UINTN return value. In SetJump, this did not cause errors;
it was only counterintuitive. But in InternalLongJump, it meant the top
32 bits of Value were stripped off.
Change all of these to use the 64-bit x register views.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reanimated-by: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
There may be architectures on which there are benefits to
eor r0, r0(, r0)
but ARM was never one of them. Change to more readable
mov r0, #0
instead.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The SetJump comment header states that:
If JumpBuffer is NULL, then ASSERT().
However, this was not currently done.
Add a call to InternalAssertJumpBuffer.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Drop redundant comment about IPF (clearly copied across from now deleted
code).
Also change
"Instead is resumes execution" ->
"Instead it resumes execution"
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Provide Fit format for UniversalPayload, developer can use argument
"--Fit" to build UniversalPayload.fit
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: BruceX Wang <brucex.wang@intel.com>
InternalLongJump was not returning the 2nd parameter passed
to LongJmp (Value) as the return value from SetJmp.
Seen with code compiled with -Os, where an LongJmp (Buffer, -1)
somehow translated to SetJmp returning 0...
Cc: Yong Li <yong.li@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Tuan Phan <tphan@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Removes the comparison since unsigned values are always greater than
or equal to 0.
See the following CodeQL query for more info:
/cpp/cpp-unsigned-comparison-zero/
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
The EFI_RNG_PROTOCOL can use the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
add a GetRngGuid() function to the RngLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
The DxeRngLib tries to generate a random number using the 3 NIST
SP 800-90 compliant DRBG algorithms, i.e. 256-bits CTR, HASH and HMAC.
If none of the call is successful, the fallback option is the default
RNG algorithm of the EFI_RNG_PROTOCOL. This default algorithm might
be an unsafe implementation.
Try requesting the Raw algorithm before requesting the default one.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4504
To keep the MdePkg self-contained and avoid dependencies on GUIDs
defined in other packages, the BaseRngLibTimer was moved to the
MdePkg.
Add a constructor to warn and request to use the MdeModulePkg
implementation.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
The include guard is incomplete and does not define the macro.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Rebecca Cran <rebecca@os.amperecomputing.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
PrintLib does not correctly decode the follow status codes:
1. EFI_IP_ADDRESS_CONFLICT
2. EFI_HTTP_ERROR
3. EFI_WARN_FILE_SYSTEM
4. EFI_WARN_RESET_REQUIRED
These missing status codes have been added.
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Add an API to retrieve satp register value.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
This commit is code optimization to InternalAllocateAlignedPages of
SmmMemoryAllocationLib which can reduce free memory fragments. Also
it can reduce one pre-allocation page.
Let's take a simple example:
The expected pages size is 8KB, Alignment value is 8KB.
In original InternalAllocateAlignedPages(), the first step is to
allocate 4 pages and then find the first 8KB-aligned address in
allocated 4 pages. If the upper limit address of allocated 4 pages
is already 8KB aligned, then the allocated 4 pages contains two
8KB-aligned 8KB ranges. The lower 2 pages will be selected and
removed from free pages. Then the higher 2 pages will be free.
Since the whole memory allocation is from high address to low
address, then the higher 2 pages cann't be merged with other free
pages, causing the free memory fragments.
However, when only allocate 3(2+2-1) pages, we can avoid the free
memory fragments in specific case. Also 3 pages must contain a
8KB-aligned 8KB range, which meets the requirement. If the upper
limit address of allocated 3 pages is 8KB-aligned, then the higher
2 pages range of allocated 3 pages is 8KB-aligned and will be
selected and removed from free pages. The remaining lower one page
of allocated 3 pages will be free and merged with left lower free
memory. This can reduce free memory fragments in smm.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Implement the SpeculationBarrier with implementations consisting of
fence instruction which provides finer-grain memory orderings.
Perform Data Barrier in RiscV: fence rw,rw
Perform Instruction Barrier in RiscV: fence.i; fence r,r
More detail is in Appendix A: RVWMO Explanatory Material in
https://github.com/riscv/riscv-isa-manual
This API is first introduced in the below commits for IA32 and x64
d9f1cac51be83d841fdc
and below the commit for ARM and AArch64 implementation
c0959b4426
This commit is to add the RiscV64 implementation which will be used by
variable service under Variable/RuntimeDxe
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Evan Chai <evan.chai@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Tuan Phan <tphan@ventanamicro.com>
Signed-off-by: Yong Li <yong.li@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
These are implementations of SerialPortLib using SBI console services.
- BaseSerialPortLibRiscVSbiLib is appropriate for SEC/PEI (XIP)
environments
- BaseSerialPortLibRiscVSbiLibRam is appropriate for PrePI/DXE
environments
Tested with:
- Qemu RiscVVirt (non-DBCN case, backed by UART)
- TinyEMU + RiscVVirt (non-DBCN case, HTIF)
- TinyEMU + RiscVVirt (DBCN case, HTIF)
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a few more definitions and make SbiCall and TranslateError
usable (not static) by library users.
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4144
This Library is NULL library of TraceHubDebugSysTLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Guo Gua <gua.guo@intel.com>
Cc: Chan Laura <laura.chan@intel.com>
Cc: Prakashan Krishnadas Veliyathuparambil <krishnadas.veliyathuparambil.prakashan@intel.com>
Cc: K N Karthik <karthik.k.n@intel.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Ceping Sun
Suqiang Ren
Chao Li
Michael D Kinney
Jeff Brasen
devel@edk2.groups.io
Zhiquan Li
王洋
Sunil V L
Dhaval Sharma
Dun Tan
Jake Garver
Pedro Falcato
Mateusz Albecki
Pierre Gondois
Leif Lindholm
Brucex.Wang
Andrei Warkentin
Michael Kubacki
Nate DeSimone
Tuan Phan
Yong Li
Gua Guo