Based on gSmmBaseHobGuid:
If gSmmBaseHobGuid found, means SmBase info has been relocated
and recorded in the SmBase array.
So, this patch check smbase relocation is done or not in
SmmCpuFeaturesInitializeProcessor().
With SmmRelocationLib, gSmmBaseHobGuid will be always created.
Here this patch just makes the function/logic correct. The SMM
Relocation logic can be totally cleaned from the
SmmCpuFeaturesLib. But it will happen in the future patch set,
this patch does not target to the cleanup work.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
This patch refines the SmmAccess implementation:
1. SmramMap will be retrieved from the
gEfiSmmSmramMemoryGuid instead of original from
the TSEG Memory Base register.
2. Remove the gEfiAcpiVariableGuid creation, thus
the DESCRIPTOR_INDEX definition can be also cleaned.
3. The gEfiAcpiVariableGuid HOB is moved to the
OvmfPkg/Library/PlatformInitLib/PlatformInitLib.inf.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
In the PiSmmCpuDxeSmm driver, SMRAM allocation for SMI
handlers and processor Save State areas was traditionally
performed using the Smst->AllocatePages() function during
the DXE phase. The introduction of SmmRelocationLib
changes this process by moving the allocation to the PEI
phase, where Smst->AllocatePages() is not accessible.
Instead, the allocation is now handled by partitioning
the SMRAM based on the information provided by a GUID HOB
(identified by gEfiSmmSMramMemoryGuid).
This patch is to ensure that OVMF produces the
gEfiSmmSMramMemoryGuid HOB, allowing SmmRelocationLib to
reserve the necessary memory for SMBASE relocation.
More info for the change:
1. The EFI_SMM_SMRAM_MEMORY_GUID HOB, as defined in the PI
specification, vol.3, section 5, which is used to describe
the SMRAM memory regions supported by the platform. This HOB
should be produced during the memory detection phase to
align with the PI spec.
2. In addition to the memory reserved for ACPI S3 resume,
an increasing number of features require reserving SMRAM
for specific purposes, such as SmmRelocation. Other
advanced features in Intel platforms also necessitate
this. The implementation of these features varies and is
entirely dependent on the platform. This is why an
increasing number of platforms are adopting the
EFI_SMM_SMRAM_MEMORY_GUID HOB for SMRAM description.
3. It is crucial that the SMRAM information remains
consistent when retrieved from the platform, whether
through the SMM ACCESS PPI/Protocol or the
EFI_SMM_SMRAM_MEMORY_GUID HOB. Inconsistencies can lead
to unexpected issues, most commonly memory region conflicts.
4. The SMM ACCESS PPI/Protocol can be naturally
implemented for general use. The common approach is to
utilize the EFI_SMM_SMRAM_MEMORY_GUID HOB. For reference,
see the existing implementation in the EDK2 repository at
edk2/UefiPayloadPkg/SmmAccessDxe/SmmAccessDxe.inf and
edk2-platforms/Silicon/Intel/IntelSiliconPkg/Feature/
SmmAccess/Library/PeiSmmAccessLib/PeiSmmAccessLib.inf.
Next patch will refine the OVMF SMM Access to consume
the EFI_SMM_SMRAM_MEMORY_GUID HOB.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
There are below 2 differences between AMD & OVMF according
existing implementation:
1.The mode of the CPU check is different between the AMD & OVMF.
OVMF:
CpuSaveState->x86.SMMRevId & 0Xffff
AMD:
LMAValue = (UINT32)AsmReadMsr64 (EFER_ADDRESS) & LMA
2.Existing SmBase configuration is different between the
AMD & OVMF.
OVMF:
if ((CpuSaveState->x86.SMMRevId & 0xFFFF) == 0) {
CpuSaveState->x86.SMBASE = mSmBaseForAllCpus[CpuIndex];
} else {
CpuSaveState->x64.SMBASE = mSmBaseForAllCpus[CpuIndex];
}
AMD:
AmdCpuState->x64.SMBASE = mSmBaseForAllCpus[CpuIndex];
This patch provides the SmmRelocationLib library instance
for OVMF to handle the logic difference, and it won't change
the existing implementation code logic.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
The current #VC handler guards against MMIO to addresses that are mapped
with the encryption bit set, but has an special exception for MMIO
accesses to the APIC base address so allow for early access during SEC.
Now that the SEC page table has the encryption bit cleared for the APIC
base address range, there is no longer any need for this special
handling. Go ahead and remove it.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
For the most part, OVMF will clear the encryption bit for MMIO regions,
but there is currently one known exception during SEC when the APIC
base address is accessed via MMIO with the encryption bit set for
SEV-ES/SEV-SNP guests. In the case of SEV-SNP, this requires special
handling on the hypervisor side which may not be available in the
future[1], so make the necessary changes in the SEC-configured page
table to clear the encryption bit for 4K region containing the APIC
base address.
[1] https://lore.kernel.org/lkml/20240208002420.34mvemnzrwwsaesw@amd.com/#t
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jianyong Wu <jianyong.wu@arm.com>
Cc: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Future changes will make use of CpuPageTableLib to handle splitting
page table mappings during SEC phase. While it's not strictly required
by hardware, CpuPageTableLib relies on non-leaf PTEs never having the
encryption bit set, so go ahead change the page table setup code to
satisfy this expectation.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
All of platforms are switching to QemuFwCfgMmioDxeLib.inf, remove
QemuFwCfgLibMmio.inf now.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4755
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Enable QemuFwCfgMmioDxeLib.inf in RiscVVirtQemu.dsc
Build-tested only (with "RiscVVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4755
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Copy QemuFwCfgLibMmio.inf to QemuFwCfgMmioDxeLib.inf,
QemuFwCfgLibMmio.inf will be deleted when all platforms switching is
completed.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4755
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Added the PEI stage library for QemuFwCfgMmioLib, which uses the FDT to
find the fw_cfg and parse it.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4755
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Chao Li <lichao@loongson.cn>
Added the HOB methods to load and store the QEMU firmware configure
address, data address and DMA address, which are not enabled during the
DXE stage.
Build-tested only (with "ArmVirtQemu.dsc and RiscVVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4755
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Separate QemuFwCfgLibMmio.c into two files named QemuFwCfgLibMmio.c and
QemuFwCfgLibMmioDxe.c, added a new header named
QemuFwCfgLibMmioInternal.h for MMIO version.
Some DXE stage variables became non-static in this patch, they will be
restored to static in the next patch.
Build-tested only (with "ArmVirtQemu.dsc and RiscVVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4755
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Added a new GUID for QemuFwCfgLib MMIO version, called
gQemuFirmwareResourceHobGuid, which is used to save QEMU firmware
configure resource during PEI stage.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4755
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
The VirtHstiDxe does not work in confidential guests. There also isn't
anything we can reasonably test, neither flash storage nor SMM mode will
be used in that case. So just skip driver load when running in a
confidential guest.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Fixes: 506740982b ("OvmfPkg/VirtHstiDxe: add code flash check")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ensure that when a #VC exception happens, the instruction at the
instruction pointer matches the instruction that is expected given the
error code. This is to mitigate the ahoi WeSee attack [1] that could
allow hypervisors to breach integrity and confidentiality of the
firmware by maliciously injecting interrupts. This change is a
translated version of a linux patch e3ef461af35a ("x86/sev: Harden #VC
instruction emulation somewhat")
[1] https://ahoi-attacks.github.io/wesee/
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Adam Dunlap <acdunlap@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Detects qemu config issue: code pflash is writable.
Checked for both PC and Q35.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Detects qemu config issue: vars pflash is not in secure mode (write
access restricted to smm). Applies to Q35 with SMM only.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
The driver supports qemu machine types 'pc' and 'q35'.
This patch adds some helper functions to manage the bitmasks.
The implemented features depend on both OVMF build configuration
and qemu VM configuration.
For q35 a single security feature is supported and checked: In
SMM-enabled builds the driver will verify smram is properly locked.
That test should never fail.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Konstantin Kostiuk <kkostiuk@redhat.com>
Initial-patch-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4756
There are below updates in this patch:
1. Rename README to README.md so that it can be show as markdown
document.
2. Update some information about TDVF.
2. Fix some typo.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
Currently, an SEV-SNP guest will terminate if it is not running at VMPL0.
The requirement for running at VMPL0 is removed if an SVSM is present.
Update the current VMPL0 check to additionally check for the presence of
an SVSM is the guest is not running at VMPL0.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The SVSM specification documents an alternative method of discovery for
the SVSM using a reserved CPUID bit and a reserved MSR.
For the CPUID support, the #VC handler of an SEV-SNP guest should modify
the returned value in the EAX register for the 0x8000001f CPUID function
by setting bit 28 when an SVSM is present.
For the MSR support, new reserved MSR 0xc001f000 has been defined. A #VC
should be generated when accessing this MSR. The #VC handler is expected
to ignore writes to this MSR and return the physical calling area address
(CAA) on reads of this MSR.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The RMPADJUST instruction is used to alter the VMSA attribute of a page,
but the VMSA attribute can only be changed when running at VMPL0. When
an SVSM is present, use the SVSM_CORE_CREATE_VCPU and SVSM_CORE_DELTE_VCPU
calls to add or remove the VMSA attribute on a page instead of issuing
the RMPADJUST instruction directly.
Implement the AmdSvsmSnpVmsaRmpAdjust() API to perform the proper operation
to update the VMSA attribute.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
Similar to the Page State Change optimization added previously, also take
into account the possiblity of using the SVSM for PVALIDATE instructions.
Conditionally adjust the maximum number of entries based on how many
entries the SVSM calling area can support.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The PVALIDATE instruction can only be performed at VMPL0. An SVSM will
be present when running at VMPL1 or higher.
When an SVSM is present, use the SVSM_CORE_PVALIDATE call to perform
memory validation instead of issuing the PVALIDATE instruction directly.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
An SVSM requires a calling area page whose address (CAA) is used by the
SVSM to communicate and process the SVSM request.
Add a pre-defined page area to the OvmfPkg and AmdSev packages and define
corresponding PCDs used to communicate the location and size of the area.
Keep the AmdSev package in sync with the OvmfPkg and adjust the AmdSev
launch and hash area memory locations.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The PVALIDATE instruction is used to change the SNP validation of a page,
but that can only be done when running at VMPL0. To prepare for running at
a less priviledged VMPL, use the AmdSvsmLib library API to perform the
PVALIDATE. The AmdSvsmLib library will perform the proper operation on
behalf of the caller.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
Add initial support for the new AmdSvsmLib library to OvmfPkg. The initial
implementation fully implements the library interfaces.
The SVSM presence check, AmdSvsmIsSvsmPresent(), determines the presence
of an SVSM by checking if an SVSM has been advertised in the SEV-SNP
Secrets Page.
The VMPL API, AmdSvsmSnpGetVmpl(), returns the VMPL level at which OVMF is
currently running.
The CAA API, AmdSvsmSnpGetCaa(), returns the Calling Area Address when an
SVSM is present, 0 otherwise.
The PVALIDATE API, AmdSvsmSnpPvalidate(), copies the PVALIDATE logic from
the BaseMemEncryptSevLib library for the initial implementation. The
BaseMemEncryptSevLib library will be changed to use this new API so that
the decision as to whether the SVSM is needed to perform the operation
can be isolated to this library.
The VMSA API, AmdSvsmSnpVmsaRmpAdjust(), copies the RMPUPDATE logic from
the MpInitLib library for the initial implementation. The MpInitLib
library will be changed to use this new API so that the decision as to
whether the SVSM is needed to perform the operation can be isolated to
this library.
Cc: Anatol Belski <anbelski@linux.microsoft.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jianyong Wu <jianyong.wu@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The MpInitLib library will be updated to use the new AmdSvsmLib library.
To prevent any build breakage, update the OvmfPkg DSCs file to include
the AmdSvsmLib NULL library.
Cc: Anatol Belski <anbelski@linux.microsoft.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Corvin Köhne <corvink@freebsd.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jianyong Wu <jianyong.wu@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
When building the Page State Change entries for a range of memory, it can
happen that multiple calls to BuildPageStateBuffer() need to be made. If
the size of the input work area passed to BuildPageStateBuffer() exceeds
the number of entries that can be passed to the hypervisor using the GHCB
shared buffer, the Page State Change VMGEXIT support will issue multiple
VMGEXITs to process all entries in the buffer.
However, it could be that the final VMGEXIT for each round of Page State
Changes is only for a small number of entries and subsequent VMGEXITs may
still be issued to handle the full range of memory requested. To maximize
the number of entries processed during the Page State Change VMGEXIT,
limit BuildPageStateBuffer() to not build entries that exceed the maximum
number of entries that can be handled in a single Page State Change
VMGEXIT.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
In preparation for running under an SVSM at VMPL1 or higher (higher
numerically, lower privilege), re-organize the way a page state change
is performed in order to free up the GHCB for use by the SVSM support.
Currently, the page state change logic directly uses the GHCB shared
buffer to build the page state change structures. However, this will be
in conflict with the use of the GHCB should an SVSM call be required.
Instead, use a separate buffer (an area in the workarea during SEC and
an allocated page during PEI/DXE) to hold the page state change request
and only update the GHCB shared buffer as needed.
Since the information is copied to, and operated on, in the GHCB shared
buffer this has the added benefit of not requiring to save the start and
end entries for use when validating the memory during the page state
change sequence.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
Calculate the amount of memory that can be use to build the Page State
Change data (SNP_PAGE_STATE_CHANGE_INFO) instead of using a hard-coded
size. This allows for changes to the GHCB shared buffer size without
having to make changes to the page state change code.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
In prep for follow-on patches, fix an area of the code that does not meet
the uncrustify coding standards.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
If the hypervisor supports retrieval of the vCPU APIC IDs, retrieve
them before any APs are actually started. The APIC IDs can be used
to start the APs for any SEV-SNP guest, but is a requirement for an
SEV-SNP guest that is running under an SVSM.
After retrieving the APIC IDs, save the address of the APIC ID data
structure in a GUIDed HOB.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The AsmRmpAdjust() function returns a UINT32, however in SevSnpIsVmpl0()
the return value is checked with EFI_ERROR() when it should just be
compared to 0. Fix the error check.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4752
Previously the TdTcg2Dxe and its corresponding HashLibTdx were in
SecurityPkg. This patch updates the paths in OvmfPkgX64.dsc and
IntelTdxX64.dsc after TdTcg2Dxe and HashLibTdxLib have been moved to
OvmfPkg.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4752
This library is the one of SecurityPkg/Tcg/TdTcg2Dxe. It is
designed for Intel TDX enlightened OVMF. So moving it from SecurityPkg
to OvmfPkg. To prevent breaking the build, the moving is splitted into 2
patch. SecurityPkg/Tcg/TdTcg2Dxe will be deleted in the next patch.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4752
This library is the one of SecurityPkg/Library/HashLibTdx. It is
designed for Intel TDX enlightened OVMF. So moving it from SecurityPkg
to OvmfPkg. To prevent breaking the build, the moving is splitted into 2
patch. SecurityPkg/Library/HashLibTdx will be deleted in the next patch.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Disable Svpbmt extension as QEMU not enables it in default config.
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4696
Refer to the [GHCI] spec, TDVF should clear the BIT5 for RBP in the mask.
And TDVF should clear the regitsers to avoid leaking secrets to VMM.
Reference:
[GHCI]: TDX Guest-Host-Communication Interface v1.5
https://cdrdv2.intel.com/v1/dl/getContent/726792
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4696
Refer to the [GHCI] spec, TDVF should clear the BIT5 for RBP in the mask.
Reference:
[GHCI]: TDX Guest-Host-Communication Interface v1.5
https://cdrdv2.intel.com/v1/dl/getContent/726792
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
In case PcdFirmwareReleaseDateString is not set use a valid date
as fallback. But the default valid date can _NOT_ pass the Microsoft
SVVP test "Check SMBIOS Table Specific Requirements". The test emitted
the error message:
BIOS Release Date string is unexpected length: 8. This string must be in
MM/DD/YYYY format. No other format is allowed and no additional information
may be included. See field description in the SMBIOS specification.
Base on SMBIOS spec v3.7.0:
08h 2.0+ BIOS Release Date BYTE STRING
String number of the BIOS release date. The date
string, if supplied, is in either mm/dd/yy or
mm/dd/yyyy format. If the year portion of the string
is two digits, the year is assumed to be 19yy.
NOTE: The mm/dd/yyyy format is required for SMBIOS
version 2.3 and later.
So, let's tweek the fallback release date again.
Fixes: a0f9628705 ("OvmfPkg/SmbiosPlatformDxe: tweak fallback release date") [edk2-stable202305~327]
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Message-Id: <20240204092914.29813-1-jlee@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Pawel Polawski <ppolawsk@redhat.com>
Cc: Oliver Steffen <osteffen@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Ruifeng Gao <ruifeng.gao@intel.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
[lersek@redhat.com: Turn the CC's from the list posting to commit message
body tags, for placating "PatchCheck.py". Also work the
"ruifeng.gao@intel.com" email address into a format that "PatchCheck.py"
accepts.]
BSP workflow is quite simliar to the non-coco case.
TDX_WORK_AREA_PGTBL_READY is used to record the paging mode:
1 == 4-level paging
2 == 5-level paging
APs will look at TDX_WORK_AREA_PGTBL_READY to figure whenever
they should enable 5-level paging or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20240301074402.98625-9-kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: move "CheckForSev:" label into "%if PG_5_LEVEL" scope,
as discussed with Gerd]
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Oliver Steffen <osteffen@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
[lersek@redhat.com: turn the "Cc:" message headers from Gerd's on-list
posting into "Cc:" tags in the commit message, in order to pacify
"PatchCheck.py"]
Jiaxin Wu
Dionna Glaze
Michael Roth
Chao Li
Gerd Hoffmann
Adam Dunlap
Konstantin Kostiuk
Min M Xu
Tom Lendacky
Tuan Phan
Ceping Sun
Laszlo Ersek
Lee, Chun-Yi