Before get default value for each questions, call ExtractConfig function to get the altcfg string for all formset. Later when question try to get default value from AltCfg string, just get the value from the saved altcfg string instead of call ExtractConfig function to get it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16162 6f19259b-4bc3-4df7-8a09-765794883524
Recent changes in the QEMU ACPI table generator have shown that our
limited client for that interface is insufficient and/or brittle.
Implement the full interface utilizing OrderedCollectionLib for addressing
fw_cfg blobs by name.
In order to stay compatible with EFI_ACPI_TABLE_PROTOCOL, we don't try to
identify QEMU's RSD PTR and link it into the UEFI system configuration
table. Instead, once all linker/loader commands have been processed, we
process the AddPointer commands for a second time.
In the second pass, we look at the targets of these pointer commands. The
key idea (by Michael Tsirkin) is that any ACPI interpreter will only be
able to locate ACPI tables by following absolute pointers, hence QEMU's
set of AddPointer commands will cover all of the ACPI tables (and more,
see below).
Some of QEMU's AddPointer commands (ie. some fields in ACPI tables) may
point to areas in fw_cfg blobs that are not ACPI tables themselves.
Examples are the BGRT.ImageAddress field, and the TCPA.LASA field. We tell
these apart from ACPI tables by performing the following checks on pointer
target "candidates":
- length check against minimum ACPI table size, and remaining blob size
- checksum verification.
If a target area looks like an ACPI table, and is different from RSDT and
DSDT (which EFI_ACPI_TABLE_PROTOCOL handles internally), we install the
table (at which point EFI_ACPI_TABLE_PROTOCOL creates a deep copy of the
relevant segment of the pointed-to fw_cfg blob).
Simultaneously, we keep account if each fw_cfg blob has ever been
referenced as the target of an AddPointer command without that AddPointer
command actually identifying an ACPI table. In this case the containing
fw_cfg file (of AcpiNVS memory type) must remain around forever, because
we never install that area with EFI_ACPI_TABLE_PROTOCOL, but some field in
some ACPI table that we *do* install still references it, by the absolute
address that we've established during the first pass.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16158 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we rewrite the client code for QEMU's fw_cfg ACPI table
loader interface. In order to avoid randomly intermixed hunks in that
patch, first remove the old code cleanly.
We remove the InstallQemuLinkedTables() function and empty the
InstallAllQemuLinkedTables() function. We also remove CheckRsdp().
InstallAllQemuLinkedTables() will return constant EFI_NOT_FOUND to
AcpiPlatformEntryPoint(), causing the latter to proceed to OVMF's builtin
tables.
This way the history remains bisectable and the new client gets a clean
start in the next patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16157 6f19259b-4bc3-4df7-8a09-765794883524
We used to state in this header file that we only cared about the Allocate
command. This is no longer the case; update the comments accordingly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16156 6f19259b-4bc3-4df7-8a09-765794883524
The "complete" QEMU fw_cfg ACPI loader will need to look up downloaded
blobs by name, in order to implement the AddPointer and AddChecksum
commands. Introduce OrderedCollectionLib to support such indexing.
BaseOrderedCollectionRedBlackTreeLib is a BASE module, hence add the
OrderedCollectionLib resolution to the main [LibraryClasses] section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16155 6f19259b-4bc3-4df7-8a09-765794883524
1. Fix a bug of generating additional EOL in file header.
2. Fix a bug of format error for Defines section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16153 6f19259b-4bc3-4df7-8a09-765794883524
even if the native function's arguments are less than 4.
From MSDN x64 Software Conventions, Overview of x64 Calling Conventions:
“The caller is responsible for allocating space for parameters to the
callee, and must always allocate sufficient space for the 4 register
parameters, even if the callee doesn’t have that many parameters.
This aids in the simplicity of supporting C unprototyped functions,
and vararg C/C++ functions.”
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud elhaj@hp.com
Reviewed by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed by: Feng Tian <Feng.Tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16152 6f19259b-4bc3-4df7-8a09-765794883524
1. Fix a bug of packaging a full path file in zip at Linux.
2. Fix a format error of generating Hob/Event/BootMode information.
3. Fix a bug of generating additional “GUID” subtype for “UNDEFINED” guid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16149 6f19259b-4bc3-4df7-8a09-765794883524
KVM on ARM currently masks the timer interrupt on the timer side when
delivering an interrupt to the guest. This itself is a workaround for an
issue where the interrupt is reraised and trapped by the host as soon as
the guest is entered, resulting in the guest being starved.
Work around this by calling ArmGenericTimerEnable () after servicing each
interrupt. The virtual version of ArmGenericTimerCounterLib will then
make sure to unmask the interrupt again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16144 6f19259b-4bc3-4df7-8a09-765794883524
Some platforms do not have SysConfig controller used by the ARM
Versatile Express.
Some peripheral drivers currently rely on SysConfigLib (eg: PL031
RTC driver, LCD driver).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16143 6f19259b-4bc3-4df7-8a09-765794883524
AppPkg: Replace existing DevShell dependencies with DevMedia.
These patches will NOT cause existing code which uses DevShell to break.
During an interim period, either DevShell or DevMedia may be used.
In the future, DevShell will be removed from the code base.
During the interim, DevShell and DevMedia refer to the same library.
StdLib/LibC/Uefi/Devices/daShell.inf
Make this library also satisfy the DevMedia library class.
StdLib/StdLib.inc
Add a library class definition for DevMedia
AppPkg/Applications/OrderedCollectionTest/OrderedCollectionTest.inf
AppPkg/Applications/Python/PythonCore.inf
AppPkg/Applications/Sockets/GetAddrInfo/GetAddrInfo.inf
AppPkg/Applications/Sockets/GetHostByAddr/GetHostByAddr.inf
AppPkg/Applications/Sockets/GetHostByDns/GetHostByDns.inf
AppPkg/Applications/Sockets/GetHostByName/GetHostByName.inf
AppPkg/Applications/Sockets/GetNameInfo/GetNameInfo.inf
AppPkg/Applications/Sockets/GetNetByAddr/GetNetByAddr.inf
AppPkg/Applications/Sockets/GetNetByName/GetNetByName.inf
AppPkg/Applications/Sockets/GetServByName/GetServByName.inf
AppPkg/Applications/Sockets/GetServByPort/GetServByPort.inf
AppPkg/Applications/Sockets/RecvDgram/RecvDgram.inf
AppPkg/Applications/Sockets/SetHostName/SetHostName.inf
AppPkg/Applications/Sockets/SetSockOpt/SetSockOpt.inf
AppPkg/Applications/Sockets/TftpServer/TftpServer.inf
AppPkg/Applications/Sockets/WebServer/WebServer.inf
Change LibraryClass dependency from DevShell to DevMedia
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16142 6f19259b-4bc3-4df7-8a09-765794883524
This adds support for executing UEFI in a QEMU/mach-virt emulated environment.
The following assumptions are made about the target:
- DRAM base at 0x4000_0000, containing the device tree blob
- DRAM size at least 1 MB
- device tree uses 64-bit physical base addresses and sizes
- ARM architected timer
- Cortex-A15 CPU (if built for 32-bit)
The following information is retrieved from the device tree:
- PL011 UART base address
- GIC base addresses
- virtual timer interrupt
- PL031 RTC base address
- DRAM size, must be at least 128 MB
- virtio MMIO transports
- PSCI 0.2 availability (for reset and poweroff)
The device tree image is relocated and installed as a configuration table
so an EFI stub enabled kernel can be booted directly without the need for
a bootloader.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
This adds 2 implementations of SerialPortLib for device tree based platforms
using a PL011 UART:
- an 'early' one which is completely stateless and uses only fixed PCDs
- a normal one which takes its base address from a HOB containing the base
address discovered in the PEI phase
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-with-remarks-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16140 6f19259b-4bc3-4df7-8a09-765794883524
This GUID will identify a customized HOB that carries the base address of
the PL011 serial port, for clients that cannot access PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16139 6f19259b-4bc3-4df7-8a09-765794883524
This is an implementation of ArmPlatformLib that discovers the size of system
DRAM from a device tree blob located at the address passed in
gArmTokenSpaceGuid.PcdDeviceTreeBaseAddress, which should equal the value in
gArmTokenSpaceGuid.PcdSystemMemoryBase.
As the device tree blob is passed in system DRAM, this library can only be used
if sufficient DRAM is available (>= 128 MB) and if not using shadowed NOR. The
reason for this is that it makes it easier to guarantee that such a device tree
blob at base of DRAM will not be clobbered before we get a chance to preserve it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16138 6f19259b-4bc3-4df7-8a09-765794883524
This driver enumerates the device nodes in the device tree located at the
base address passed in gArmTokenSpaceGuid.PcdDeviceTreeBaseAddress, and
installs drivers for devices it cares about (GIC interrupt controller, RTC,
architected timer interrupt)
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16137 6f19259b-4bc3-4df7-8a09-765794883524
This is a fork of the ARM PlatformPeiLib for virtual machines. The main
purpose of having this specific implementation is that it allows us to
preserve the device tree blob if it was passed to us in system DRAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16136 6f19259b-4bc3-4df7-8a09-765794883524
Introduce gArmVirtualizationTokenSpaceGuid.PcdDeviceTreeBaseAddress and
PcdDeviceTreeInitialBaseAddress, which will be used by virtual machine ports
that discover the system configuration from a flattened device tree DTB image.
The latter is FixedPcd only, and should contain the initial offset of the DTB,
the former may be declared as dynamic, and updated at runtime if the DTB is
relocated before the DXE phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16135 6f19259b-4bc3-4df7-8a09-765794883524
To allow a dynamically discovered UART base address, we parse the device
tree early and store the base address in a HOB. To prevent circular
constructor dependencies from interfering with bringing up the serial port
using this dynamic base address, use our own private HobLib with no
dependencies on DebugLib either directly or indirectly through UefiLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16134 6f19259b-4bc3-4df7-8a09-765794883524
This adds an implementation of NorFlashPlatformLib that exposes the
two 64 MB NOR flash banks that are provided by QEMU's mach-virt
emulation both in 32-bit and 64-bit mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16133 6f19259b-4bc3-4df7-8a09-765794883524
This include file contains platform specific defines, and is shared by
various modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16132 6f19259b-4bc3-4df7-8a09-765794883524
2. Update IP6 driver to use previous configured prefix length if a pre-exist IP6 address with unspecified prefix length.
3. Add NULL check for Dhcp protocol pointer before it decline the address in Ip6ConfigSetStatefulAddrCallback() function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye, Ting (ting.ye@intel.com)
Reviewed-By: Wu, Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16131 6f19259b-4bc3-4df7-8a09-765794883524
Fix casts of parameters to sprintf() so that they have the correct type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Stefan Kaeser <stefankaeser@hotmail.com>
Reviewed-by: daryl.mcdaniel@intel.com
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16125 6f19259b-4bc3-4df7-8a09-765794883524
This separates PlatformPei and PlatformPeiLib so the latter can be
overridden by a specific platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16110 6f19259b-4bc3-4df7-8a09-765794883524
Qiu Shumin
Ard Biesheuvel
Eric Dong
Gao, Liming
Laszlo Ersek
Hess Chen
Samer El-Haj-Mahmoud elhaj
Ni Ruiyu
Olivier Martin
Daryl McDaniel
Michael Casadevall
Fu, Siyuan
Feng Tian
Stefan Kaeser
Ronald Cron
Harry Liebel
Yingke Liu