audk/OvmfPkg
Phil Dennis-Jordan c137d95081 OvmfPkg/QemuVideoDxe: VMWare SVGA device support
In addition to the QXL, Cirrus, etc. VGA adapters, Qemu also implements
a basic version of VMWare's SVGA display device. Drivers for this
device exist for some guest OSes which do not support Qemu's other
display adapters, so supporting it in OVMF is useful in conjunction
with those OSes.

This change adds support for the SVGA device's framebuffer to
QemuVideoDxe's graphics output protocol implementation, based on
VMWare's documentation. The most basic initialisation, framebuffer
layout query, and mode setting operations are implemented.

The device relies on port-based 32-bit I/O, unfortunately on misaligned
addresses. This limits the driver's support to the x86 family of
platforms.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-04-07 12:34:11 +02:00
..
AcpiPlatformDxe OvmfPkg: Allow multiple add-pointer linker commands to same ACPI table 2017-03-30 21:53:13 +02:00
AcpiTables OvmfPkg AcpiTables: Use PcdDebugIoPort to describe QEMU debug console 2016-11-16 17:05:17 +01:00
BlockMmioToBlockIoDxe OvmfPkg: fix conversion specifiers in DEBUG format strings 2015-07-28 18:33:23 +00:00
Csm OvmfPkg: Make more use of ARRAY_SIZE() 2016-10-27 18:21:06 +02:00
EmuVariableFvbRuntimeDxe OvmfPkg/EmuVariableFvbRuntimeDxe: eliminate unchecked PcdSetXX() calls 2016-10-25 10:46:15 +02:00
Include OvmfPkg: VMWare SVGA display device register definitions 2017-04-07 12:22:30 +02:00
IncompatiblePciDeviceSupportDxe OvmfPkg/IncompatiblePci: Do not use deprecated macros 2017-02-10 16:52:00 +08:00
Library OvmfPkg/QemuFwCfgS3Lib: Fix VS tool chain build failure 2017-03-15 21:18:40 -07:00
PciHotPlugInitDxe OvmfPkg: add PciHotPlugInitDxe 2016-07-13 08:39:50 +02:00
PlatformDxe OvmfPkg/PlatformDxe: eliminate unchecked PcdSetXX() calls 2016-10-25 10:46:20 +02:00
PlatformPei ArmVirtPkg, OvmfPkg: retire QemuFwCfgS3Enabled() from QemuFwCfgLib 2017-03-14 21:49:16 +01:00
QemuFlashFvbServicesRuntimeDxe OvmfPkg/QemuFlashFvbServicesRuntimeDxe: eliminate unchecked PcdSetXX() calls 2016-10-25 10:46:24 +02:00
QemuVideoDxe OvmfPkg/QemuVideoDxe: VMWare SVGA device support 2017-04-07 12:34:11 +02:00
ResetVector OvmfPkg/ResetVector: Depend on PCD values of the page tables. 2016-11-04 23:47:07 +01:00
SataControllerDxe OvmfPkg: SataControllerDxe: SataControllerStop: fix use after free 2016-04-26 17:59:40 +02:00
Sec OvmfPkg: Fix typos in comments 2016-10-19 13:32:45 -07:00
SmbiosPlatformDxe OvmfPkg: convert C files with LF line terminators to CRLF 2016-09-12 13:12:29 +02:00
SmmAccess OvmfPkg: add DXE_DRIVER for providing TSEG-as-SMRAM during boot-time DXE 2015-11-30 18:41:43 +00:00
SmmControl2Dxe OvmfPkg/SmmControl2Dxe: save fw_cfg boot script with QemuFwCfgS3Lib 2017-03-14 21:49:36 +01:00
Virtio10Dxe OvmfPkg/Virtio10Dxe: don't bind virtio-vga 2016-09-01 22:54:47 +02:00
VirtioBlkDxe OvmfPkg: Fix typos in comments 2016-07-08 10:11:15 +02:00
VirtioGpuDxe OvmfPkg: Make more use of ARRAY_SIZE() 2016-10-27 18:21:06 +02:00
VirtioNetDxe OvmfPkg: VirtioNetDxe: adapt virtio-net packet header size to virtio-1.0 2016-04-06 19:21:50 +02:00
VirtioPciDeviceDxe OvmfPkg: Fix typos in comments 2016-07-08 10:11:15 +02:00
VirtioRngDxe OvmfPkg: convert C files with LF line terminators to CRLF 2016-09-12 13:12:29 +02:00
VirtioScsiDxe OvmfPkg: Fix typing errors in header files 2016-09-13 14:14:31 +02:00
XenBusDxe OvmfPkg/XenBusDxe: Use EFIAPI for XenStoreVSPrint 2017-02-23 17:06:43 +01:00
XenIoPciDxe OvmfPkg: Fix typos in comments 2016-07-08 10:11:15 +02:00
XenPvBlkDxe OvmfPkg: Fix typing errors 2016-09-12 13:12:32 +02:00
Contributions.txt */Contributions.txt: Update example email address 2015-02-03 17:29:14 +00:00
DecomprScratchEnd.fdf.inc OvmfPkg: Sec: assert the build-time calculated end of the scratch buffer 2015-11-30 18:41:20 +00:00
License.txt OvmfPkg: Add the MIT license to License.txt. 2014-10-29 06:48:15 +00:00
OvmfPkg.dec OvmfPkg: introduce QemuFwCfgS3Lib class 2017-03-14 21:49:01 +01:00
OvmfPkg.fdf.inc OvmfPkg: Increase default RELEASE build image size to 2MB 2016-01-29 19:06:47 +00:00
OvmfPkgIa32.dsc OvmfPkg: resolve QemuFwCfgS3Lib 2017-03-14 21:49:14 +01:00
OvmfPkgIa32.fdf OvmfPkg: pull in TLS modules with -D TLS_ENABLE (also enabling HTTPS) 2017-01-17 10:26:58 +01:00
OvmfPkgIa32X64.dsc OvmfPkg: resolve QemuFwCfgS3Lib 2017-03-14 21:49:14 +01:00
OvmfPkgIa32X64.fdf OvmfPkg: pull in TLS modules with -D TLS_ENABLE (also enabling HTTPS) 2017-01-17 10:26:58 +01:00
OvmfPkgX64.dsc OvmfPkg: resolve QemuFwCfgS3Lib 2017-03-14 21:49:14 +01:00
OvmfPkgX64.fdf OvmfPkg: pull in TLS modules with -D TLS_ENABLE (also enabling HTTPS) 2017-01-17 10:26:58 +01:00
README OvmfPkg/README: refer to MdeModulePkg & PlatformBootManagerLib in examples 2016-05-25 12:24:23 +02:00
VarStore.fdf.inc OvmfPkg: simplify VARIABLE_STORE_HEADER generation 2016-02-15 17:47:29 +01:00
build.sh OvmfPkg/build.sh: Parse qemu version in more cases 2017-03-16 14:31:18 -07:00
create-release.py OvmfPkg: Update web page and wiki urls 2015-02-05 18:24:38 +00:00

README

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.


=== OVMF OVERVIEW ===

The Open Virtual Machine Firmware (OVMF) project aims
to support firmware for Virtual Machines using the edk2
code base.  More information can be found at:

http://www.tianocore.org/ovmf/

=== STATUS ===

Current capabilities:
* IA32 and X64 architectures
* QEMU (0.10.0 or later)
  - Video, keyboard, IDE, CD-ROM, serial
  - Runs UEFI shell
  - Optional NIC support.  Requires QEMU (0.12.2 or later)
* UEFI Linux boots
* UEFI Windows 8 boots
* UEFI Windows 7 & Windows 2008 Server boot (see important notes below!)

=== FUTURE PLANS ===

* Test/Stabilize UEFI Self-Certification Tests (SCT) results

=== BUILDING OVMF ===

Pre-requisites:
* Build environment capable of build the edk2 MdeModulePkg.
* A properly configured ASL compiler:
  - Intel ASL compiler: Available from http://www.acpica.org
  - Microsoft ASL compiler: Available from http://www.acpi.info
* NASM: http://www.nasm.us/

Update Conf/target.txt ACTIVE_PLATFORM for OVMF:
                             PEI arch   DXE arch   UEFI interfaces
* OvmfPkg/OvmfPkgIa32.dsc      IA32       IA32           IA32
* OvmfPkg/OvmfPkgIa32X64.dsc   IA32       X64            X64
* OvmfPkg/OvmfPkgX64.dsc       X64        X64            X64

Update Conf/target.txt TARGET_ARCH based on the .dsc file:
                             TARGET_ARCH
* OvmfPkg/OvmfPkgIa32.dsc     IA32
* OvmfPkg/OvmfPkgIa32X64.dsc  IA32 X64
* OvmfPkg/OvmfPkgX64.dsc      X64

Following the edk2 build process, you will find the OVMF binaries
under the $WORKSPACE/Build/*/*/FV directory.  The actual path will
depend on how your build is configured.  You can expect to find
these binary outputs:
* OVMF.FD
  - Please note!  This filename has changed.  Older releases used OVMF.Fv.
* OvmfVideo.rom
  - This file is not built separately any longer, starting with svn r13520.

More information on building OVMF can be found at:

https://github.com/tianocore/tianocore.github.io/wiki/How%20to%20build%20OVMF

=== RUNNING OVMF on QEMU ===

* QEMU 0.12.2 or later is required.
* Be sure to use qemu-system-x86_64, if you are using and X64 firmware.
  (qemu-system-x86_64 works for the IA32 firmware as well, of course.)
* Use OVMF for QEMU firmware (3 options available)
  - Option 1: QEMU 1.6 or newer; Use QEMU -pflash parameter
    * QEMU/OVMF will use emulated flash, and fully support UEFI variables
    * Run qemu with: -pflash path/to/OVMF.fd
    * Note that this option is required for running SecureBoot-enabled builds
      (-D SECURE_BOOT_ENABLE).
  - Option 2: Use QEMU -bios parameter
    * Note that UEFI variables will be partially emulated, and non-volatile
      variables may lose their contents after a reboot
    * Run qemu with: -bios path/to/OVMF.fd
  - Option 3: Use QEMU -L parameter
    * Note that UEFI variables will be partially emulated, and non-volatile
      variables may lose their contents after a reboot
    * Either copy, rename or symlink OVMF.fd => bios.bin
    * Use the QEMU -L parameter to specify the directory where the bios.bin
      file is located.
* The EFI shell is built into OVMF builds at this time, so it should
  run automatically if a UEFI boot application is not found on the
  removable media.
* On Linux, newer version of QEMU may enable KVM feature, and this might
  cause OVMF to fail to boot.  The QEMU '-no-kvm' may allow OVMF to boot.
* Capturing OVMF debug messages on qemu:
  - The default OVMF build writes debug messages to IO port 0x402.  The
    following qemu command line options save them in the file called
    debug.log: '-debugcon file:debug.log -global isa-debugcon.iobase=0x402'.
  - It is possible to revert to the original behavior, when debug messages were
    written to the emulated serial port (potentially intermixing OVMF debug
    output with UEFI serial console output).  For this the
    '-D DEBUG_ON_SERIAL_PORT' option has to be passed to the build command (see
    the next section), and in order to capture the serial output qemu needs to
    be started with eg. '-serial file:serial.log'.
  - Debug messages fall into several categories.  Logged vs. suppressed
    categories are controlled at OVMF build time by the
    'gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel' bitmask (an UINT32
    value) in the selected .dsc file.  Individual bits of this bitmask are
    defined in <MdePkg/Include/Library/DebugLib.h>.  One non-default bit (with
    some performance impact) that is frequently set for debugging is 0x00400000
    (DEBUG_VERBOSE).
  - The RELEASE build target ('-b RELEASE' build option, see below) disables
    all debug messages.  The default build target is DEBUG.

=== Build Scripts ===

On systems with the bash shell you can use OvmfPkg/build.sh to simplify
building and running OVMF.

So, for example, to build + run OVMF X64:
$ OvmfPkg/build.sh -a X64
$ OvmfPkg/build.sh -a X64 qemu

And to run a 64-bit UEFI bootable ISO image:
$ OvmfPkg/build.sh -a X64 qemu -cdrom /path/to/disk-image.iso

To build a 32-bit OVMF without debug messages using GCC 4.5:
$ OvmfPkg/build.sh -a IA32 -b RELEASE -t GCC45

=== SMM support ===

Requirements:
* SMM support requires QEMU 2.5.
* The minimum required QEMU machine type is "pc-q35-2.5".
* SMM with KVM requires Linux 4.4 (host).

OVMF is capable of utilizing SMM if the underlying QEMU or KVM hypervisor
emulates SMM. SMM is put to use in the S3 suspend and resume infrastructure,
and in the UEFI variable driver stack. The purpose is (virtual) hardware
separation between the runtime guest OS and the firmware (OVMF), with the
intent to make Secure Boot actually secure, by preventing the runtime guest OS
from tampering with the variable store and S3 areas.

For SMM support, OVMF must be built with the "-D SMM_REQUIRE" option. The
resultant firmware binary will check if QEMU actually provides SMM emulation;
if it doesn't, then OVMF will log an error and trigger an assertion failure
during boot (even in RELEASE builds). Both the naming of the flag (SMM_REQUIRE,
instead of SMM_ENABLE), and this behavior are consistent with the goal
described above: this is supposed to be a security feature, and fallbacks are
not allowed. Similarly, a pflash-backed variable store is a requirement.

QEMU should be started with the options listed below (in addition to any other
guest-specific flags). The command line should be gradually composed from the
hints below. '\' is used to extend the command line to multiple lines, and '^'
can be used on Windows.

* QEMU binary and options specific to 32-bit guests:

  $ qemu-system-i386 -cpu coreduo,-nx \

  or

  $ qemu-system-x86_64 -cpu <MODEL>,-lm,-nx \

* QEMU binary for running 64-bit guests (no particular options):

  $ qemu-system-x86_64 \

* Flags common to all SMM scenarios (only the Q35 machine type is supported):

  -machine q35,smm=on,accel=(tcg|kvm) \
  -m ... \
  -smp ... \
  -global driver=cfi.pflash01,property=secure,value=on \
  -drive if=pflash,format=raw,unit=0,file=OVMF_CODE.fd,readonly=on \
  -drive if=pflash,format=raw,unit=1,file=copy_of_OVMF_VARS.fd \

* In order to disable S3, add:

  -global ICH9-LPC.disable_s3=1 \

=== Network Support ===

OVMF provides a UEFI network stack by default. Its lowest level driver is the
NIC driver, higher levels are generic. In order to make DHCP, PXE Boot, and eg.
socket test utilities from the StdLib edk2 package work, (1) qemu has to be
configured to emulate a NIC, (2) a matching UEFI NIC driver must be available
when OVMF boots.

(If a NIC is configured for the virtual machine, and -- dependent on boot order
-- PXE booting is attempted, but no DHCP server responds to OVMF's DHCP
DISCOVER message at startup, the boot process may take approx. 3 seconds
longer.)

* For each NIC emulated by qemu, a GPLv2 licensed UEFI driver is available from
  the iPXE project. The qemu source distribution, starting with version 1.5,
  contains prebuilt binaries of these drivers (and of course allows one to
  rebuild them from source as well). This is the recommended set of drivers.

* Use the qemu -netdev and -device options, or the legacy -net option, to
  enable NIC support: <http://wiki.qemu.org/Documentation/Networking>.

* For a qemu >= 1.5 binary running *without* any "-M machine" option where
  "machine" would identify a < qemu-1.5 configuration (for example: "-M
  pc-i440fx-1.4" or "-M pc-0.13"), the iPXE drivers are automatically available
  to and configured for OVMF in the default qemu installation.

* For a qemu binary in [0.13, 1.5), or a qemu >= 1.5 binary with an "-M
  machine" option where "machine" selects a < qemu-1.5 configuration:

  - download a >= 1.5.0-rc1 source tarball from <http://wiki.qemu.org/Download>,

  - extract the following iPXE driver files from the tarball and install them
    in a location that is accessible to qemu processes (this may depend on your
    SELinux configuration, for example):

    qemu-VERSION/pc-bios/efi-e1000.rom
    qemu-VERSION/pc-bios/efi-ne2k_pci.rom
    qemu-VERSION/pc-bios/efi-pcnet.rom
    qemu-VERSION/pc-bios/efi-rtl8139.rom
    qemu-VERSION/pc-bios/efi-virtio.rom

  - extend the NIC's -device option on the qemu command line with a matching
    "romfile=" optarg:

    -device e1000,...,romfile=/full/path/to/efi-e1000.rom
    -device ne2k_pci,...,romfile=/full/path/to/efi-ne2k_pci.rom
    -device pcnet,...,romfile=/full/path/to/efi-pcnet.rom
    -device rtl8139,...,romfile=/full/path/to/efi-rtl8139.rom
    -device virtio-net-pci,...,romfile=/full/path/to/efi-virtio.rom

* Independently of the iPXE NIC drivers, the default OVMF build provides a
  basic virtio-net driver, located in OvmfPkg/VirtioNetDxe.

* Also independently of the iPXE NIC drivers, Intel's proprietary E1000 NIC
  driver (PROEFI) can be embedded in the OVMF image at build time:

  - Download UEFI drivers for the e1000 NIC
    - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17515&lang=eng
    - Install the drivers into a directory called Intel3.5 in your WORKSPACE.

  - Include the driver in OVMF during the build:
    - Add "-D E1000_ENABLE" to your build command,
    - For example: "build -D E1000_ENABLE".

* When a matching iPXE driver is configured for a NIC as described above, it
  takes priority over other drivers that could possibly drive the card too:

                 | e1000  ne2k_pci  pcnet  rtl8139  virtio-net-pci
    -------------+------------------------------------------------
    iPXE         |   x       x        x       x           x
    VirtioNetDxe |                                        x
    Intel PROEFI |   x

=== OVMF Flash Layout ===

Like all current IA32/X64 system designs, OVMF's firmware
device (rom/flash) appears in QEMU's physical address space
just below 4GB (0x100000000).

The layout of the firmware device in memory looks like:

+--------------------------------------- 4GB (0x100000000)
| VTF0 (16-bit reset code) and OVMF SEC
| (SECFV)
+--------------------------------------- varies based on flash size
|
| Compressed main firmware image
| (FVMAIN_COMPACT)
|
+--------------------------------------- base + 0x20000
| Fault-tolerant write (FTW)
| Spare blocks (64KB/0x10000)
+--------------------------------------- base + 0x10000
| FTW Work block (4KB/0x1000)
+--------------------------------------- base + 0x0f000
| Event log area (4KB/0x1000)
+--------------------------------------- base + 0x0e000
| Non-volatile variable storage
| area (56KB/0xe000)
+--------------------------------------- base address

OVMF supports building a 1MB or a 2MB flash image. The base address for
a 1MB image in QEMU physical memory is 0xfff00000. The base address for
a 2MB image is 0xffe00000.

The code in SECFV locates FVMAIN_COMPACT, and decompresses the
main firmware (MAINFV) into RAM memory at address 0x800000. The
remaining OVMF firmware then uses this decompressed firmware
volume image.

=== UNIXGCC Debug ===

If you build with the UNIXGCC toolchain, then debugging will be disabled
due to larger image sizes being produced by the UNIXGCC toolchain. The
first choice recommendation is to use GCC44 or newer instead.

If you must use UNIXGCC, then you can override the build options for
particular libraries and modules in the .dsc to re-enable debugging
selectively. For example:
  [Components]
  OvmfPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf {
    <BuildOptions>
      GCC:*_*_*_CC_FLAGS             = -UMDEPKG_NDEBUG
  }
  MdeModulePkg/Universal/BdsDxe/BdsDxe.inf {
    <BuildOptions>
      GCC:*_*_*_CC_FLAGS             = -UMDEPKG_NDEBUG
  }

=== UEFI Windows 7 & Windows 2008 Server ===

* One of the '-vga std' and '-vga qxl' QEMU options should be used.
* Only one video mode, 1024x768x32, is supported at OS runtime.
* The '-vga qxl' QEMU option is recommended. After booting the installed
  guest OS, select the video card in Device Manager, and upgrade its driver
  to the QXL XDDM one. Download location:
  <http://www.spice-space.org/download.html>, Guest | Windows binaries.
  This enables further resolutions at OS runtime, and provides S3
  (suspend/resume) capability.