Laszlo Ersek 778832bcad UefiCpuPkg/MpInitLib: honor the platform's boot CPU count in AP detection
- If a platform boots such that the boot CPU count is smaller than
  PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
  AP detection" logic added in commit 6e1987f19af7. (Which has been
  documented as a subset of use case (2) in the previous patch.)

  Said logic depends on the boot CPU count being equal to
  PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
  platform either has to wait too long, or risk missing APs due to an
  early timeout.

- The platform may not be able to use the variant added in commit
  0594ec417c89 either. (Which has been documented as use case (1) in the
  previous patch.)

  See commit 861218740d6d. When OVMF runs on QEMU/KVM, APs may check in
  with the BSP in arbitrary order, plus the individual AP may take
  arbitrarily long to check-in. If "NumApsExecuting" falls to zero
  mid-enumeration, APs will be missed.

Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
2019-10-11 23:20:09 +02:00
2019-10-04 11:18:22 +01:00
2019-08-19 08:45:29 +08:00

EDK II Project

A modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications from www.uefi.org.

The majority of the content in the EDK II open source project uses a BSD-2-Clause Plus Patent License. The EDK II open source project contains the following components that are covered by additional licenses:

The EDK II Project is composed of packages. The maintainers for each package are listed in Maintainers.txt.

Resources

Code Contributions

To make a contribution to a TianoCore project, follow these steps.

  1. Create a change description in the format specified below to use in the source control commit log.

  2. Your commit message must include your Signed-off-by signature

  3. Submit your code to the TianoCore project using the process that the project documents on its web page. If the process is not documented, then submit the code on development email list for the project.

  4. It is preferred that contributions are submitted using the same copyright license as the base project. When that is not possible, then contributions using the following licenses can be accepted:

    For documentation:

    Contributions of code put into the public domain can also be accepted.

    Contributions using other licenses might be accepted, but further review will be required.

Developer Certificate of Origin

Your change description should use the standard format for a commit message, and must include your Signed-off-by signature.

In order to keep track of who did what, all patches contributed must include a statement that to the best of the contributor's knowledge they have the right to contribute it under the specified license.

The test for this is as specified in the Developer's Certificate of Origin (DCO) 1.1. The contributor certifies compliance by adding a line saying

Signed-off-by: Developer Name developer@example.org

where Developer Name is the contributor's real name, and the email address is one the developer is reachable through at the time of contributing.

Developer's Certificate of Origin 1.1

By making a contribution to this project, I certify that:

(a) The contribution was created in whole or in part by me and I
    have the right to submit it under the open source license
    indicated in the file; or

(b) The contribution is based upon previous work that, to the best
    of my knowledge, is covered under an appropriate open source
    license and I have the right under that license to submit that
    work with modifications, whether created in whole or in part
    by me, under the same open source license (unless I am
    permitted to submit under a different license), as indicated
    in the file; or

(c) The contribution was provided directly to me by some other
    person who certified (a), (b) or (c) and I have not modified
    it.

(d) I understand and agree that this project and the contribution
    are public and that a record of the contribution (including all
    personal information I submit with it, including my sign-off) is
    maintained indefinitely and may be redistributed consistent with
    this project or the open source license(s) involved.

Sample Change Description / Commit Message

From: Contributor Name <contributor@example.com>
Subject: [Repository/Branch PATCH] Pkg-Module: Brief-single-line-summary

Full-commit-message

Signed-off-by: Contributor Name <contributor@example.com>

Notes for sample patch email

  • The first line of commit message is taken from the email's subject line following [Repository/Branch PATCH]. The remaining portion of the commit message is the email's content.
  • git format-patch is one way to create this format

Definitions for sample patch email

  • Repository is the identifier of the repository the patch applies. This identifier should only be provided for repositories other than edk2. For example edk2-BuildSpecification or staging.
  • Branch is the identifier of the branch the patch applies. This identifier should only be provided for branches other than edk2/master. For example edk2/UDK2015, edk2-BuildSpecification/release/1.27, or staging/edk2-test.
  • Module is a short identifier for the affected code or documentation. For example MdePkg, MdeModulePkg/UsbBusDxe, Introduction, or EDK II INF File Format.
  • Brief-single-line-summary is a short summary of the change.
  • The entire first line should be less than ~70 characters.
  • Full-commit-message a verbose multiple line comment describing the change. Each line should be less than ~70 characters.
  • Signed-off-by is the contributor's signature identifying them by their real/legal name and their email address.

Submodules

Submodule in EDK II is allowed but submodule chain should be avoided as possible as we can. Currently EDK II contains two submodules

  • CryptoPkg/Library/OpensslLib/openssl
  • ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3

The latter one is actually required by previous one. It's inevitable in openssl-1.1.1 (since stable201905) for floating point parameter conversion, but should be dropped once there's no such need in future release of openssl.

To get a full, buildable EDK II repository, use following steps of git command

$ git clone https://github.com/tianocore/edk2.git
$ cd edk2
$ git submodule update --init
$ cd ..

If there's update for submodules, use following git commands to get the latest submodules code.

$ cd edk2
$ git pull
$ git submodule update

Note: When cloning submodule repos, '--recursive' option is not recommended. EDK II itself will not use any code/feature from submodules in above submodules. So using '--recursive' adds a dependency on being able to reach servers we do not actually want any code from, as well as needlessly downloading code we will not use.

Description
Acidanthera UEFI Development Kit based on EDK II edk2-stable202405
Readme 330 MiB
Languages
C 71.6%
Assembly 16.4%
Python 8.5%
Rich Text Format 1.3%
C++ 0.8%
Other 1%