tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.c

1252 lines
44 KiB
C
Raw Blame History

/** @file
Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "UfsBlockIoPei.h"
//
// Template for UFS HC Peim Private Data.
//
UFS_PEIM_HC_PRIVATE_DATA gUfsHcPeimTemplate = {
UFS_PEIM_HC_SIG, // Signature
NULL, // Controller
NULL, // Pool
{ // BlkIoPpi
UfsBlockIoPeimGetDeviceNo,
UfsBlockIoPeimGetMediaInfo,
UfsBlockIoPeimReadBlocks
},
{ // BlkIo2Ppi
EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION,
UfsBlockIoPeimGetDeviceNo2,
UfsBlockIoPeimGetMediaInfo2,
UfsBlockIoPeimReadBlocks2
},
{ // BlkIoPpiList
EFI_PEI_PPI_DESCRIPTOR_PPI,
&gEfiPeiVirtualBlockIoPpiGuid,
NULL
},
{ // BlkIo2PpiList
EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
&gEfiPeiVirtualBlockIo2PpiGuid,
NULL
},
{ // Media
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
},
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
},
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
},
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
},
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
},
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
},
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
},
{
MSG_UFS_DP,
FALSE,
TRUE,
FALSE,
0x1000,
0
}
},
{ // EndOfPeiNotifyList
(EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
&gEfiEndOfPeiSignalPpiGuid,
UfsEndOfPei
},
0, // UfsHcBase
0, // Capabilities
0, // TaskTag
0, // UtpTrlBase
0, // Nutrs
NULL, // TrlMapping
0, // UtpTmrlBase
0, // Nutmrs
NULL, // TmrlMapping
{ // Luns
{
UFS_LUN_0, // Ufs Common Lun 0
UFS_LUN_1, // Ufs Common Lun 1
UFS_LUN_2, // Ufs Common Lun 2
UFS_LUN_3, // Ufs Common Lun 3
UFS_LUN_4, // Ufs Common Lun 4
UFS_LUN_5, // Ufs Common Lun 5
UFS_LUN_6, // Ufs Common Lun 6
UFS_LUN_7, // Ufs Common Lun 7
},
0x0000, // By default exposing all Luns.
0x0
}
};
/**
Execute Request Sense SCSI command on a specific UFS device.
@param[in] Private A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The lun on which the SCSI cmd executed.
@param[out] DataBuffer A pointer to output sense data.
@param[out] DataBufferLength The length of output sense data.
@retval EFI_SUCCESS The command executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsPeimRequestSense (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
OUT VOID *DataBuffer,
OUT UINT32 *DataBufferLength
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
EFI_STATUS Status;
ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
ZeroMem (Cdb, sizeof (Cdb));
Cdb[0] = EFI_SCSI_OP_REQUEST_SENSE;
Packet.Timeout = UFS_TIMEOUT;
Packet.Cdb = Cdb;
Packet.CdbLength = sizeof (Cdb);
Packet.DataDirection = UfsDataIn;
Packet.InDataBuffer = DataBuffer;
Packet.InTransferLength = *DataBufferLength;
Packet.SenseData = NULL;
Packet.SenseDataLength = 0;
Status = UfsExecScsiCmds (Private,(UINT8)Lun, &Packet);
if (!EFI_ERROR (Status)) {
*DataBufferLength = Packet.InTransferLength;
}
return Status;
}
/**
Execute TEST UNITY READY SCSI command on a specific UFS device.
@param[in] Private A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The lun on which the SCSI cmd executed.
@param[out] SenseData A pointer to output sense data.
@param[out] SenseDataLength The length of output sense data.
@retval EFI_SUCCESS The command executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsPeimTestUnitReady (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
EFI_STATUS Status;
ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
ZeroMem (Cdb, sizeof (Cdb));
Cdb[0] = EFI_SCSI_OP_TEST_UNIT_READY;
Packet.Timeout = UFS_TIMEOUT;
Packet.Cdb = Cdb;
Packet.CdbLength = sizeof (Cdb);
Packet.DataDirection = UfsNoData;
Packet.SenseData = SenseData;
Packet.SenseDataLength = *SenseDataLength;
Status = UfsExecScsiCmds (Private,(UINT8)Lun, &Packet);
if (*SenseDataLength != 0) {
*SenseDataLength = Packet.SenseDataLength;
}
return Status;
}
/**
Execute INQUIRY SCSI command on a specific UFS device.
@param[in] Private A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The lun on which the SCSI cmd executed.
@param[out] Inquiry A pointer to Inquiry data buffer.
@param[out] InquiryLengths The length of output Inquiry data.
@param[out] SenseData A pointer to output sense data.
@param[out] SenseDataLength The length of output sense data.
@retval EFI_SUCCESS The command executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsPeimInquiry (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
OUT VOID *Inquiry,
OUT UINT32 *InquiryLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
EFI_STATUS Status;
ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
ZeroMem (Cdb, sizeof (Cdb));
Cdb[0] = EFI_SCSI_OP_INQUIRY;
Cdb[4] = sizeof (EFI_SCSI_INQUIRY_DATA);
Packet.Timeout = UFS_TIMEOUT;
Packet.Cdb = Cdb;
Packet.CdbLength = sizeof (Cdb);
Packet.InDataBuffer = Inquiry;
Packet.InTransferLength = *InquiryLength;
Packet.DataDirection = UfsDataIn;
Packet.SenseData = SenseData;
Packet.SenseDataLength = *SenseDataLength;
Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);
if (*SenseDataLength != 0) {
*SenseDataLength = Packet.SenseDataLength;
}
if (!EFI_ERROR (Status)) {
*InquiryLength = Packet.InTransferLength;
}
return Status;
}
/**
Execute READ CAPACITY(10) SCSI command on a specific UFS device.
@param[in] Private A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The lun on which the SCSI cmd executed.
@param[out] DataBuffer A pointer to READ_CAPACITY data buffer.
@param[out] DataLength The length of output READ_CAPACITY data.
@param[out] SenseData A pointer to output sense data.
@param[out] SenseDataLength The length of output sense data.
@retval EFI_SUCCESS The command executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsPeimReadCapacity (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
OUT VOID *DataBuffer,
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_TEN];
EFI_STATUS Status;
ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
ZeroMem (Cdb, sizeof (Cdb));
Cdb[0] = EFI_SCSI_OP_READ_CAPACITY;
Packet.Timeout = UFS_TIMEOUT;
Packet.Cdb = Cdb;
Packet.CdbLength = sizeof (Cdb);
Packet.InDataBuffer = DataBuffer;
Packet.InTransferLength = *DataLength;
Packet.DataDirection = UfsDataIn;
Packet.SenseData = SenseData;
Packet.SenseDataLength = *SenseDataLength;
Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);
if (*SenseDataLength != 0) {
*SenseDataLength = Packet.SenseDataLength;
}
if (!EFI_ERROR (Status)) {
*DataLength = Packet.InTransferLength;
}
return Status;
}
/**
Execute READ CAPACITY(16) SCSI command on a specific UFS device.
@param[in] Private A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The lun on which the SCSI cmd executed.
@param[out] DataBuffer A pointer to READ_CAPACITY data buffer.
@param[out] DataLength The length of output READ_CAPACITY data.
@param[out] SenseData A pointer to output sense data.
@param[out] SenseDataLength The length of output sense data.
@retval EFI_SUCCESS The command executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsPeimReadCapacity16 (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
OUT VOID *DataBuffer,
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
EFI_STATUS Status;
ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
ZeroMem (Cdb, sizeof (Cdb));
Cdb[0] = EFI_SCSI_OP_READ_CAPACITY16;
Cdb[1] = 0x10; // Service Action should be 0x10 for UFS device.
Cdb[13] = 0x20; // The maximum number of bytes for returned data.
Packet.Timeout = UFS_TIMEOUT;
Packet.Cdb = Cdb;
Packet.CdbLength = sizeof (Cdb);
Packet.InDataBuffer = DataBuffer;
Packet.InTransferLength = *DataLength;
Packet.DataDirection = UfsDataIn;
Packet.SenseData = SenseData;
Packet.SenseDataLength = *SenseDataLength;
Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);
if (*SenseDataLength != 0) {
*SenseDataLength = Packet.SenseDataLength;
}
if (!EFI_ERROR (Status)) {
*DataLength = Packet.InTransferLength;
}
return Status;
}
/**
Execute READ (10) SCSI command on a specific UFS device.
@param[in] Private A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The lun on which the SCSI cmd executed.
@param[in] StartLba The start LBA.
@param[in] SectorNum The sector number to be read.
@param[out] DataBuffer A pointer to data buffer.
@param[out] DataLength The length of output data.
@param[out] SenseData A pointer to output sense data.
@param[out] SenseDataLength The length of output sense data.
@retval EFI_SUCCESS The command executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsPeimRead10 (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
IN UINTN StartLba,
IN UINT32 SectorNum,
OUT VOID *DataBuffer,
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_TEN];
EFI_STATUS Status;
ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
ZeroMem (Cdb, sizeof (Cdb));
Cdb[0] = EFI_SCSI_OP_READ10;
WriteUnaligned32 ((UINT32 *)&Cdb[2], SwapBytes32 ((UINT32) StartLba));
WriteUnaligned16 ((UINT16 *)&Cdb[7], SwapBytes16 ((UINT16) SectorNum));
Packet.Timeout = UFS_TIMEOUT;
Packet.Cdb = Cdb;
Packet.CdbLength = sizeof (Cdb);
Packet.InDataBuffer = DataBuffer;
Packet.InTransferLength = *DataLength;
Packet.DataDirection = UfsDataIn;
Packet.SenseData = SenseData;
Packet.SenseDataLength = *SenseDataLength;
Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);
if (*SenseDataLength != 0) {
*SenseDataLength = Packet.SenseDataLength;
}
if (!EFI_ERROR (Status)) {
*DataLength = Packet.InTransferLength;
}
return Status;
}
/**
Execute READ (16) SCSI command on a specific UFS device.
@param[in] Private A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The lun on which the SCSI cmd executed.
@param[in] StartLba The start LBA.
@param[in] SectorNum The sector number to be read.
@param[out] DataBuffer A pointer to data buffer.
@param[out] DataLength The length of output data.
@param[out] SenseData A pointer to output sense data.
@param[out] SenseDataLength The length of output sense data.
@retval EFI_SUCCESS The command executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsPeimRead16 (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
IN UINTN StartLba,
IN UINT32 SectorNum,
OUT VOID *DataBuffer,
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
EFI_STATUS Status;
ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
ZeroMem (Cdb, sizeof (Cdb));
Cdb[0] = EFI_SCSI_OP_READ16;
WriteUnaligned64 ((UINT64 *)&Cdb[2], SwapBytes64 (StartLba));
WriteUnaligned32 ((UINT32 *)&Cdb[10], SwapBytes32 (SectorNum));
Packet.Timeout = UFS_TIMEOUT;
Packet.Cdb = Cdb;
Packet.CdbLength = sizeof (Cdb);
Packet.InDataBuffer = DataBuffer;
Packet.InTransferLength = *DataLength;
Packet.DataDirection = UfsDataIn;
Packet.SenseData = SenseData;
Packet.SenseDataLength = *SenseDataLength;
Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);
if (*SenseDataLength != 0) {
*SenseDataLength = Packet.SenseDataLength;
}
if (!EFI_ERROR (Status)) {
*DataLength = Packet.InTransferLength;
}
return Status;
}
/**
Parsing Sense Keys from sense data.
@param Media The pointer of EFI_PEI_BLOCK_IO_MEDIA
@param SenseData The pointer of EFI_SCSI_SENSE_DATA
@param NeedRetry The pointer of action which indicates what is need to retry
@retval EFI_DEVICE_ERROR Indicates that error occurs
@retval EFI_SUCCESS Successfully to complete the parsing
**/
EFI_STATUS
UfsPeimParsingSenseKeys (
IN EFI_PEI_BLOCK_IO2_MEDIA *Media,
IN EFI_SCSI_SENSE_DATA *SenseData,
OUT BOOLEAN *NeedRetry
)
{
if ((SenseData->Sense_Key == EFI_SCSI_SK_NOT_READY) &&
(SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_NO_MEDIA)) {
Media->MediaPresent = FALSE;
*NeedRetry = FALSE;
DEBUG ((EFI_D_VERBOSE, "UfsBlockIoPei: Is No Media\n"));
return EFI_DEVICE_ERROR;
}
if ((SenseData->Sense_Key == EFI_SCSI_SK_UNIT_ATTENTION) &&
(SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_MEDIA_CHANGE)) {
*NeedRetry = TRUE;
DEBUG ((EFI_D_VERBOSE, "UfsBlockIoPei: Is Media Change\n"));
return EFI_SUCCESS;
}
if ((SenseData->Sense_Key == EFI_SCSI_SK_UNIT_ATTENTION) &&
(SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_RESET)) {
*NeedRetry = TRUE;
DEBUG ((EFI_D_VERBOSE, "UfsBlockIoPei: Was Reset Before\n"));
return EFI_SUCCESS;
}
if ((SenseData->Sense_Key == EFI_SCSI_SK_MEDIUM_ERROR) ||
((SenseData->Sense_Key == EFI_SCSI_SK_NOT_READY) &&
(SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_MEDIA_UPSIDE_DOWN))) {
*NeedRetry = FALSE;
DEBUG ((EFI_D_VERBOSE, "UfsBlockIoPei: Media Error\n"));
return EFI_DEVICE_ERROR;
}
if (SenseData->Sense_Key == EFI_SCSI_SK_HARDWARE_ERROR) {
*NeedRetry = FALSE;
DEBUG ((EFI_D_VERBOSE, "UfsBlockIoPei: Hardware Error\n"));
return EFI_DEVICE_ERROR;
}
if ((SenseData->Sense_Key == EFI_SCSI_SK_NOT_READY) &&
(SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_NOT_READY) &&
(SenseData->Addnl_Sense_Code_Qualifier == EFI_SCSI_ASCQ_IN_PROGRESS)) {
*NeedRetry = TRUE;
DEBUG ((EFI_D_VERBOSE, "UfsBlockIoPei: Was Reset Before\n"));
return EFI_SUCCESS;
}
*NeedRetry = FALSE;
DEBUG ((EFI_D_VERBOSE, "UfsBlockIoPei: Sense Key = 0x%x ASC = 0x%x!\n", SenseData->Sense_Key, SenseData->Addnl_Sense_Code));
return EFI_DEVICE_ERROR;
}
/**
Gets the count of block I/O devices that one specific block driver detects.
This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
of all the detected ATAPI devices it detects during the enumeration process.
To the PEI legacy floppy driver, it returns the number of all the legacy
devices it finds during its enumeration process. If no device is detected,
then the function will return zero.
@param[in] PeiServices General-purpose services that are available
to every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@retval EFI_SUCCESS The operation performed successfully.
**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetDeviceNo (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
OUT UINTN *NumberBlockDevices
)
{
//
// For Ufs device, it has up to 8 normal Luns plus some well-known Luns.
// At PEI phase, we will only expose normal Luns to user.
// For those disabled Lun, when user try to access it, the operation would fail.
//
*NumberBlockDevices = UFS_PEIM_MAX_LUNS;
return EFI_SUCCESS;
}
/**
Gets a block device's media information.
This function will provide the caller with the specified block device's media
information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the
device index that was assigned during the enumeration
process. This index is a number from one to
NumberBlockDevices.
@param[out] MediaInfo The media information of the specified block media.
The caller is responsible for the ownership of this
data structure.
@par Note:
The MediaInfo structure describes an enumeration of possible block device
types. This enumeration exists because no device paths are actually passed
across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
in the Recovery PEIM, such as "Try to recover from legacy floppy first,
LS-120 second, CD-ROM third." If there are multiple partitions abstracted
by a given device type, they should be reported in ascending order; this
order also applies to nested partitions, such as legacy MBR, where the
outermost partitions would have precedence in the reporting order. The
same logic applies to systems such as IDE that have precedence relationships
like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
@retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
@retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetMediaInfo (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
IN UINTN DeviceIndex,
OUT EFI_PEI_BLOCK_IO_MEDIA *MediaInfo
)
{
EFI_STATUS Status;
UFS_PEIM_HC_PRIVATE_DATA *Private;
EFI_SCSI_SENSE_DATA SenseData;
UINT8 SenseDataLength;
EFI_SCSI_DISK_CAPACITY_DATA Capacity;
EFI_SCSI_DISK_CAPACITY_DATA16 Capacity16;
UINTN DataLength;
BOOLEAN NeedRetry;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS (This);
NeedRetry = TRUE;
if (DeviceIndex >= UFS_PEIM_MAX_LUNS) {
return EFI_INVALID_PARAMETER;
}
if ((Private->Luns.BitMask & (BIT0 << DeviceIndex)) == 0) {
return EFI_ACCESS_DENIED;
}
ZeroMem (&SenseData, sizeof (SenseData));
ZeroMem (&Capacity, sizeof (Capacity));
ZeroMem (&Capacity16, sizeof (Capacity16));
SenseDataLength = sizeof (SenseData);
//
// First test unit ready
//
do {
Status = UfsPeimTestUnitReady (
Private,
DeviceIndex,
&SenseData,
&SenseDataLength
);
if (!EFI_ERROR (Status)) {
break;
}
if (SenseDataLength == 0) {
continue;
}
Status = UfsPeimParsingSenseKeys (&(Private->Media[DeviceIndex]), &SenseData, &NeedRetry);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
} while (NeedRetry);
DataLength = sizeof (EFI_SCSI_DISK_CAPACITY_DATA);
SenseDataLength = 0;
Status = UfsPeimReadCapacity (Private, DeviceIndex, &Capacity, (UINT32 *)&DataLength, NULL, &SenseDataLength);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
if ((Capacity.LastLba3 == 0xff) && (Capacity.LastLba2 == 0xff) &&
(Capacity.LastLba1 == 0xff) && (Capacity.LastLba0 == 0xff)) {
DataLength = sizeof (EFI_SCSI_DISK_CAPACITY_DATA16);
SenseDataLength = 0;
Status = UfsPeimReadCapacity16 (Private, DeviceIndex, &Capacity16, (UINT32 *)&DataLength, NULL, &SenseDataLength);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
Private->Media[DeviceIndex].LastBlock = ((UINT32)Capacity16.LastLba3 << 24) | (Capacity16.LastLba2 << 16) | (Capacity16.LastLba1 << 8) | Capacity16.LastLba0;
Private->Media[DeviceIndex].LastBlock |= LShiftU64 ((UINT64)Capacity16.LastLba7, 56) | LShiftU64((UINT64)Capacity16.LastLba6, 48) | LShiftU64 ((UINT64)Capacity16.LastLba5, 40) | LShiftU64 ((UINT64)Capacity16.LastLba4, 32);
Private->Media[DeviceIndex].BlockSize = (Capacity16.BlockSize3 << 24) | (Capacity16.BlockSize2 << 16) | (Capacity16.BlockSize1 << 8) | Capacity16.BlockSize0;
} else {
Private->Media[DeviceIndex].LastBlock = ((UINT32)Capacity.LastLba3 << 24) | (Capacity.LastLba2 << 16) | (Capacity.LastLba1 << 8) | Capacity.LastLba0;
Private->Media[DeviceIndex].BlockSize = (Capacity.BlockSize3 << 24) | (Capacity.BlockSize2 << 16) | (Capacity.BlockSize1 << 8) | Capacity.BlockSize0;
}
MediaInfo->DeviceType = UfsDevice;
MediaInfo->MediaPresent = Private->Media[DeviceIndex].MediaPresent;
MediaInfo->LastBlock = (UINTN)Private->Media[DeviceIndex].LastBlock;
MediaInfo->BlockSize = Private->Media[DeviceIndex].BlockSize;
return EFI_SUCCESS;
}
/**
Reads the requested number of blocks from the specified block device.
The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
@param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, PPIs that
want to talk to a single device must specify the device
index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
The caller is responsible for the ownership of the
buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
the intrinsic block size of the device.
**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimReadBlocks (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_RECOVERY_BLOCK_IO_PPI *This,
IN UINTN DeviceIndex,
IN EFI_PEI_LBA StartLBA,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
UINTN BlockSize;
UINTN NumberOfBlocks;
UFS_PEIM_HC_PRIVATE_DATA *Private;
EFI_SCSI_SENSE_DATA SenseData;
UINT8 SenseDataLength;
BOOLEAN NeedRetry;
Status = EFI_SUCCESS;
NeedRetry = TRUE;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS (This);
ZeroMem (&SenseData, sizeof (SenseData));
SenseDataLength = sizeof (SenseData);
//
// Check parameters
//
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}
if (BufferSize == 0) {
return EFI_SUCCESS;
}
if (DeviceIndex >= UFS_PEIM_MAX_LUNS) {
return EFI_INVALID_PARAMETER;
}
if ((Private->Luns.BitMask & (BIT0 << DeviceIndex)) == 0) {
return EFI_ACCESS_DENIED;
}
BlockSize = Private->Media[DeviceIndex].BlockSize;
if (BufferSize % BlockSize != 0) {
Status = EFI_BAD_BUFFER_SIZE;
}
if (StartLBA > Private->Media[DeviceIndex].LastBlock) {
Status = EFI_INVALID_PARAMETER;
}
NumberOfBlocks = BufferSize / BlockSize;
do {
Status = UfsPeimTestUnitReady (
Private,
DeviceIndex,
&SenseData,
&SenseDataLength
);
if (!EFI_ERROR (Status)) {
break;
}
if (SenseDataLength == 0) {
continue;
}
Status = UfsPeimParsingSenseKeys (&(Private->Media[DeviceIndex]), &SenseData, &NeedRetry);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
} while (NeedRetry);
SenseDataLength = 0;
if (Private->Media[DeviceIndex].LastBlock < 0xfffffffful) {
Status = UfsPeimRead10 (
Private,
DeviceIndex,
(UINT32)StartLBA,
(UINT32)NumberOfBlocks,
Buffer,
(UINT32 *)&BufferSize,
NULL,
&SenseDataLength
);
} else {
Status = UfsPeimRead16 (
Private,
DeviceIndex,
(UINT32)StartLBA,
(UINT32)NumberOfBlocks,
Buffer,
(UINT32 *)&BufferSize,
NULL,
&SenseDataLength
);
}
return Status;
}
/**
Gets the count of block I/O devices that one specific block driver detects.
This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
of all the detected ATAPI devices it detects during the enumeration process.
To the PEI legacy floppy driver, it returns the number of all the legacy
devices it finds during its enumeration process. If no device is detected,
then the function will return zero.
@param[in] PeiServices General-purpose services that are available
to every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@retval EFI_SUCCESS The operation performed successfully.
**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetDeviceNo2 (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This,
OUT UINTN *NumberBlockDevices
)
{
//
// For Ufs device, it has up to 8 normal Luns plus some well-known Luns.
// At PEI phase, we will only expose normal Luns to user.
// For those disabled Lun, when user try to access it, the operation would fail.
//
*NumberBlockDevices = UFS_PEIM_MAX_LUNS;
return EFI_SUCCESS;
}
/**
Gets a block device's media information.
This function will provide the caller with the specified block device's media
information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the
device index that was assigned during the enumeration
process. This index is a number from one to
NumberBlockDevices.
@param[out] MediaInfo The media information of the specified block media.
The caller is responsible for the ownership of this
data structure.
@par Note:
The MediaInfo structure describes an enumeration of possible block device
types. This enumeration exists because no device paths are actually passed
across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
in the Recovery PEIM, such as "Try to recover from legacy floppy first,
LS-120 second, CD-ROM third." If there are multiple partitions abstracted
by a given device type, they should be reported in ascending order; this
order also applies to nested partitions, such as legacy MBR, where the
outermost partitions would have precedence in the reporting order. The
same logic applies to systems such as IDE that have precedence relationships
like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
@retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
@retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetMediaInfo2 (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This,
IN UINTN DeviceIndex,
OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo
)
{
EFI_STATUS Status;
UFS_PEIM_HC_PRIVATE_DATA *Private;
EFI_PEI_BLOCK_IO_MEDIA Media;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);
Status = UfsBlockIoPeimGetMediaInfo (
PeiServices,
&Private->BlkIoPpi,
DeviceIndex,
&Media
);
if (EFI_ERROR (Status)) {
return Status;
}
CopyMem (MediaInfo, &(Private->Media[DeviceIndex]), sizeof (EFI_PEI_BLOCK_IO2_MEDIA));
return EFI_SUCCESS;
}
/**
Reads the requested number of blocks from the specified block device.
The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
@param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, PPIs that
want to talk to a single device must specify the device
index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
The caller is responsible for the ownership of the
buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
the intrinsic block size of the device.
**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimReadBlocks2 (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This,
IN UINTN DeviceIndex,
IN EFI_PEI_LBA StartLBA,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
UFS_PEIM_HC_PRIVATE_DATA *Private;
Status = EFI_SUCCESS;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);
Status = UfsBlockIoPeimReadBlocks (
PeiServices,
&Private->BlkIoPpi,
DeviceIndex,
StartLBA,
BufferSize,
Buffer
);
return Status;
}
/**
One notified function to cleanup the allocated DMA buffers at the end of PEI.
@param[in] PeiServices Pointer to PEI Services Table.
@param[in] NotifyDescriptor Pointer to the descriptor for the Notification
event that caused this function to execute.
@param[in] Ppi Pointer to the PPI data associated with this function.
@retval EFI_SUCCESS The function completes successfully
**/
EFI_STATUS
EFIAPI
UfsEndOfPei (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
IN VOID *Ppi
)
{
UFS_PEIM_HC_PRIVATE_DATA *Private;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS_NOTIFY (NotifyDescriptor);
if ((Private->Pool != NULL) && (Private->Pool->Head != NULL)) {
UfsPeimFreeMemPool (Private->Pool);
}
if (Private->UtpTmrlBase != NULL) {
IoMmuFreeBuffer (
EFI_SIZE_TO_PAGES (Private->Nutmrs * sizeof (UTP_TMRD)),
Private->UtpTmrlBase,
Private->TmrlMapping
);
}
if (Private->UtpTrlBase != NULL) {
IoMmuFreeBuffer (
EFI_SIZE_TO_PAGES (Private->Nutrs * sizeof (UTP_TRD)),
Private->UtpTrlBase,
Private->TrlMapping
);
}
UfsControllerStop (Private);
return EFI_SUCCESS;
}
/**
The user code starts with this function.
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@retval EFI_SUCCESS The driver is successfully initialized.
@retval Others Can't initialize the driver.
**/
EFI_STATUS
EFIAPI
InitializeUfsBlockIoPeim (
IN EFI_PEI_FILE_HANDLE FileHandle,
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
EFI_STATUS Status;
UFS_PEIM_HC_PRIVATE_DATA *Private;
EDKII_UFS_HOST_CONTROLLER_PPI *UfsHcPpi;
UINT32 Index;
UFS_CONFIG_DESC Config;
UINTN MmioBase;
UINT8 Controller;
//
// Shadow this PEIM to run from memory
//
if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
return EFI_SUCCESS;
}
//
// locate ufs host controller PPI
//
Status = PeiServicesLocatePpi (
&gEdkiiPeiUfsHostControllerPpiGuid,
0,
NULL,
(VOID **) &UfsHcPpi
);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
IoMmuInit ();
Controller = 0;
MmioBase = 0;
while (TRUE) {
Status = UfsHcPpi->GetUfsHcMmioBar (UfsHcPpi, Controller, &MmioBase);
//
// When status is error, meant no controller is found
//
if (EFI_ERROR (Status)) {
break;
}
Private = AllocateCopyPool (sizeof (UFS_PEIM_HC_PRIVATE_DATA), &gUfsHcPeimTemplate);
if (Private == NULL) {
Status = EFI_OUT_OF_RESOURCES;
break;
}
Private->BlkIoPpiList.Ppi = &Private->BlkIoPpi;
Private->BlkIo2PpiList.Ppi = &Private->BlkIo2Ppi;
Private->UfsHcBase = MmioBase;
//
// Initialize the memory pool which will be used in all transactions.
//
Status = UfsPeimInitMemPool (Private);
if (EFI_ERROR (Status)) {
Status = EFI_OUT_OF_RESOURCES;
break;
}
//
// Initialize UFS Host Controller H/W.
//
Status = UfsControllerInit (Private);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UfsDevicePei: Host Controller Initialization Error, Status = %r\n", Status));
Controller++;
continue;
}
//
// UFS 2.0 spec Section 13.1.3.3:
// At the end of the UFS Interconnect Layer initialization on both host and device side,
// the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
//
Status = UfsExecNopCmds (Private);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Ufs Sending NOP IN command Error, Status = %r\n", Status));
Controller++;
continue;
}
//
// The host enables the device initialization completion by setting fDeviceInit flag.
//
Status = UfsSetFlag (Private, UfsFlagDevInit);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Ufs Set fDeviceInit Flag Error, Status = %r\n", Status));
Controller++;
continue;
}
//
// Get Ufs Device's Lun Info by reading Configuration Descriptor.
//
Status = UfsRwDeviceDesc (Private, TRUE, UfsConfigDesc, 0, 0, &Config, sizeof (UFS_CONFIG_DESC));
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Ufs Get Configuration Descriptor Error, Status = %r\n", Status));
Controller++;
continue;
}
for (Index = 0; Index < UFS_PEIM_MAX_LUNS; Index++) {
if (Config.UnitDescConfParams[Index].LunEn != 0) {
Private->Luns.BitMask |= (BIT0 << Index);
DEBUG ((EFI_D_INFO, "Ufs %d Lun %d is enabled\n", Controller, Index));
}
}
PeiServicesInstallPpi (&Private->BlkIoPpiList);
PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
Controller++;
}
return EFI_SUCCESS;
}
Reference in New Issue View Git Blame Copy Permalink