mirror of https://github.com/acidanthera/audk.git
04ff9d663b
In Intel datasheet 316966-002 (the "q35 spec"), Table 5-1 "DRAM Controller Register Address Map (D0:F0)" leaves the byte register at config space offset 0x9C unused. On QEMU's Q35 board, for detecting the "SMRAM at default SMBASE" feature, firmware is expected to write MCH_DEFAULT_SMBASE_QUERY (0xFF) to offset MCH_DEFAULT_SMBASE_CTL (0x9C), and read back the register. If the value is MCH_DEFAULT_SMBASE_IN_RAM (0x01), then the feature is available, and the range mentioned below is open (accessible to code running outside of SMM). Then, once firmware writes MCH_DEFAULT_SMBASE_LCK (0x02) to the register, the MCH_DEFAULT_SMBASE_SIZE (128KB) range at 0x3_0000 (SMM_DEFAULT_SMBASE) gets closed and locked down, and the register becomes read-only. The area is reopened, and the register becomes read/write, at platform reset. Add the above-listed macros to "Q35MchIch9.h". (There are some other unused offsets in Table 5-1; for example we had scavenged 0x50 for implementing the extended TSEG feature. 0x9C is the first byte-wide register standing in isolation after 0x50.) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Message-Id: <20200129214412.2361-4-lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> |
||
|---|---|---|
| .. | ||
| Xen | ||
| E820.h | ||
| I440FxPiix4.h | ||
| LegacyVgaBios.h | ||
| LinuxBzimage.h | ||
| Q35MchIch9.h | ||
| QemuCpuHotplug.h | ||
| QemuFwCfg.h | ||
| QemuPciBridgeCapabilities.h | ||
| QemuTpm.h | ||
| Virtio.h | ||
| Virtio10.h | ||
| Virtio10Net.h | ||
| Virtio095.h | ||
| Virtio095Net.h | ||
| VirtioBlk.h | ||
| VirtioGpu.h | ||
| VirtioNet.h | ||
| VirtioScsi.h | ||