141 KiB

Raw Blame History

Distributed Monitoring with Master, Satellites and Agents

This chapter will guide you through the setup of a distributed monitoring environment, including high-availability clustering and setup details for Icinga masters, satellites and agents.

Roles: Master, Satellites and Agents

Icinga 2 nodes can be given names for easier understanding:

A master node which is on top of the hierarchy.
A satellite node which is a child of a satellite or master node.
An agent node which is connected to master and/or satellite nodes.

Rephrasing this picture into more details:

A master node has no parent node.
- A masternode is where you usually install Icinga Web 2.
- A master node can combine executed checks from child nodes into backends and notifications.
A satellite node has a parent and a child node.
- A satellite node may execute checks on its own or delegate check execution to child nodes.
- A satellite node can receive configuration for hosts/services, etc. from the parent node.
- A satellite node continues to run even if the master node is temporarily unavailable.
An agent node only has a parent node.
- An agent node will either run its own configured checks or receive command execution events from the parent node.

A client can be a secondary master, a satellite or an agent. It typically requests something from the primary master or parent node.

The following sections will refer to these roles and explain the differences and the possibilities this kind of setup offers.

Note

Previous versions of this documentation used the term Icinga client. This has been refined into Icinga agent and is visible in the docs, backends and web interfaces.

Tip: If you just want to install a single master node that monitors several hosts (i.e. Icinga agents), continue reading -- we'll start with simple examples. In case you are planning a huge cluster setup with multiple levels and lots of satellites and agents, read on -- we'll deal with these cases later on.

The installation on each system is the same: You need to install the Icinga 2 package and the required plugins.

The required configuration steps are mostly happening on the command line. You can also automate the setup.

The first thing you need learn about a distributed setup is the hierarchy of the single components.

Zones

The Icinga 2 hierarchy consists of so-called zone objects. Zones depend on a parent-child relationship in order to trust each other.

Have a look at this example for the satellite zones which have the master zone as a parent zone:

object Zone "master" {
   //...
}

object Zone "satellite region 1" {
  parent = "master"
  //...
}

object Zone "satellite region 2" {
  parent = "master"
  //...
}

There are certain limitations for child zones, e.g. their members are not allowed to send configuration commands to the parent zone members. Vice versa, the trust hierarchy allows for example the master zone to send configuration files to the satellite zone. Read more about this in the security section.

agent nodes also have their own unique zone. By convention you must use the FQDN for the zone name.

Endpoints

Nodes which are a member of a zone are so-called Endpoint objects.

Here is an example configuration for two endpoints in different zones:

object Endpoint "icinga2-master1.localdomain" {
  host = "192.168.56.101"
}

object Endpoint "icinga2-satellite1.localdomain" {
  host = "192.168.56.105"
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain" ]
}

object Zone "satellite" {
  endpoints = [ "icinga2-satellite1.localdomain" ]
  parent = "master"
}

All endpoints in the same zone work as high-availability setup. For example, if you have two nodes in the master zone, they will load-balance the check execution.

Endpoint objects are important for specifying the connection information, e.g. if the master should actively try to connect to an agent.

The zone membership is defined inside the Zone object definition using the endpoints attribute with an array of Endpoint names.

Note

There is a known problem with >2 endpoints in a zone and a message routing loop. The config validation will log a warning to let you know about this too.

If you want to check the availability (e.g. ping checks) of the node you still need a Host object.

ApiListener

In case you are using the CLI commands later, you don't have to write this configuration from scratch in a text editor. The ApiListener object is used to load the TLS certificates and specify restrictions, e.g. for accepting configuration commands.

It is also used for the Icinga 2 REST API which shares the same host and port with the Icinga 2 Cluster protocol.

The object configuration is stored in the /etc/icinga2/features-enabled/api.conf file. Depending on the configuration mode the attributes accept_commands and accept_config can be configured here.

In order to use the api feature you need to enable it and restart Icinga 2.

icinga2 feature enable api

Conventions

By convention all nodes should be configured using their FQDN.

Furthermore, you must ensure that the following names are exactly the same in all configuration files:

Host certificate common name (CN).
Endpoint configuration object for the host.
NodeName constant for the local host.

Setting this up on the command line will help you to minimize the effort. Just keep in mind that you need to use the FQDN for endpoints and for common names when asked.

Security

While there are certain mechanisms to ensure a secure communication between all nodes (firewalls, policies, software hardening, etc.), Icinga 2 also provides additional security:

TLS v1.2+ is required.
TLS cipher lists are hardened by default.
TLS certificates are mandatory for communication between nodes. The CLI command wizards help you create these certificates.
Child zones only receive updates (check results, commands, etc.) for their configured objects.
Child zones are not allowed to push configuration updates to parent zones.
Zones cannot interfere with other zones and influence each other. Each checkable host or service object is assigned to one zone only.
All nodes in a zone trust each other.
Config sync and remote command endpoint execution is disabled by default.

The underlying protocol uses JSON-RPC event notifications exchanged by nodes. The connection is secured by TLS. The message protocol uses an internal API, and as such message types and names may change internally and are not documented.

Zones build the trust relationship in a distributed environment. If you do not specify a zone for an agent/satellite and specify the parent zone, its zone members e.g. the master instance won't trust the agent/satellite.

Building this trust is key in your distributed environment. That way the parent node knows that it is able to send messages to the child zone, e.g. configuration objects, configuration in global zones, commands to be executed in this zone/for this endpoint. It also receives check results from the child zone for checkable objects (host/service).

Vice versa, the agent/satellite trusts the master and accepts configuration and commands if enabled in the api feature. If the agent/satellite would send configuration to the parent zone, the parent nodes will deny it. The parent zone is the configuration entity, and does not trust agents/satellites in this matter. An agent/satellite could attempt to modify a different agent/satellite for example, or inject a check command with malicious code.

While it may sound complicated for agent/satellite setups, it removes the problem with different roles and configurations for a master and child nodes. Both of them work the same way, are configured in the same way (Zone, Endpoint, ApiListener), and you can troubleshoot and debug them in just one go.

Versions and Upgrade

It generally is advised to use the newest releases with the same version on all instances. Prior to upgrading, make sure to plan a maintenance window.

The Icinga project aims to allow the following compatibility:

master (2.11) >= satellite (2.10) >= agent (2.9)

Older agent versions may work, but there's no guarantee. Always keep in mind that older versions are out of support and can contain bugs.

In terms of an upgrade, ensure that the master is upgraded first, then involved satellites, and last the Icinga agents. If you are on v2.10 currently, first upgrade the master instance(s) to 2.11, and then proceed with the satellites. Things are getting easier with any sort of automation tool (Puppet, Ansible, etc.).

Releases and new features may require you to upgrade master/satellite instances at once, this is highlighted in the upgrading docs if needed. One example is the CA Proxy and on-demand signing feature available since v2.8 where all involved instances need this version to function properly.

Master Setup

This section explains how to install a central single master node using the node wizard command. If you prefer to do an automated installation, please refer to the automated setup section.

Install the Icinga 2 package and setup the required plugins if you haven't done so already.

Note: Windows is not supported for a master node setup.

The next step is to run the node wizard CLI command. Prior to that ensure to collect the required information:

Parameter	Description
Common name (CN)	Required. By convention this should be the host's FQDN. Defaults to the FQDN.
Master zone name	Optional. Allows to specify the master zone name. Defaults to `master`.
Global zones	Optional. Allows to specify more global zones in addition to `global-templates` and `director-global`. Defaults to `n`.
API bind host	Optional. Allows to specify the address the ApiListener is bound to. For advanced usage only.
API bind port	Optional. Allows to specify the port the ApiListener is bound to. For advanced usage only (requires changing the default port 5665 everywhere).
Disable conf.d	Optional. Allows to disable the `include_recursive "conf.d"` directive except for the `api-users.conf` file in the `icinga2.conf` file. Defaults to `y`. Configuration on the master is discussed below.

The setup wizard will ensure that the following steps are taken:

Enable the api feature.
Generate a new certificate authority (CA) in /var/lib/icinga2/ca if it doesn't exist.
Create a certificate for this node signed by the CA key.
Update the zones.conf file with the new zone hierarchy.
Update the ApiListener and constants configuration.
Update the icinga2.conf to disable the conf.d inclusion, and add the api-users.conf file inclusion.

Here is an example of a master setup for the icinga2-master1.localdomain node on CentOS 7:

[root@icinga2-master1.localdomain /]# icinga2 node wizard

Welcome to the Icinga 2 Setup Wizard!

We will guide you through all required configuration details.

Please specify if this is a satellite/agent setup ('n' installs a master setup) [Y/n]: n

Starting the Master setup routine...

Please specify the common name (CN) [icinga2-master1.localdomain]: icinga2-master1.localdomain
Reconfiguring Icinga...
Checking for existing certificates for common name 'icinga2-master1.localdomain'...
Certificates not yet generated. Running 'api setup' now.
Generating master configuration for Icinga 2.
Enabling feature api. Make sure to restart Icinga 2 for these changes to take effect.

Master zone name [master]:

Default global zones: global-templates director-global
Do you want to specify additional global zones? [y/N]: N

Please specify the API bind host/port (optional):
Bind Host []:
Bind Port []:

Do you want to disable the inclusion of the conf.d directory [Y/n]:
Disabling the inclusion of the conf.d directory...
Checking if the api-users.conf file exists...

Done.

Now restart your Icinga 2 daemon to finish the installation!

You can verify that the CA public and private keys are stored in the /var/lib/icinga2/ca directory. Keep this path secure and include it in your backups.

In case you lose the CA private key you have to generate a new CA for signing new agent/satellite certificate requests. You then have to also re-create new signed certificates for all existing nodes.

Once the master setup is complete, you can also use this node as primary CSR auto-signing master. The following section will explain how to use the CLI commands in order to fetch their signed certificate from this master node.

Signing Certificates on the Master

All certificates must be signed by the same certificate authority (CA). This ensures that all nodes trust each other in a distributed monitoring environment.

This CA is generated during the master setup and should be the same on all master instances.

You can avoid signing and deploying certificates manually by using built-in methods for auto-signing certificate signing requests (CSR):

CSR Auto-Signing which uses a client (an agent or a satellite) ticket generated on the master as trust identifier.
On-Demand CSR Signing which allows to sign pending certificate requests on the master.

Both methods are described in detail below.

Note

On-Demand CSR Signing is available in Icinga 2 v2.8+.

CSR Auto-Signing

A client can be a secondary master, a satellite or an agent. It sends a certificate signing request (CSR) and must authenticate itself in a trusted way. The master generates a client ticket which is included in this request. That way the master can verify that the request matches the previously trusted ticket and sign the request.

Note

Icinga 2 v2.8 added the possibility to forward signing requests on a satellite to the master node. This is called CA Proxy in blog posts and design drafts. This functionality helps with the setup of three level clusters and more.

Advantages:

Nodes (secondary master, satellites, agents) can be installed by different users who have received the client ticket.
No manual interaction necessary on the master node.
Automation tools like Puppet, Ansible, etc. can retrieve the pre-generated ticket in their client catalog and run the node setup directly.

Disadvantages:

Tickets need to be generated on the master and copied to client setup wizards.
No central signing management.

CSR Auto-Signing: Preparation

Prior to using this mode, ensure that the following steps are taken on the signing master:

The master setup was run successfully. This includes:
- Generated a CA key pair
- Generated a private ticket salt stored in the TicketSalt constant, set as ticket_salt attribute inside the api feature.
Restart of the master instance.

CSR Auto-Signing: On the master

Setup wizards for agent/satellite nodes will ask you for this specific client ticket.

There are two possible ways to retrieve the ticket:

CLI command executed on the master node.
REST API request against the master node.

Required information:

Parameter	Description
Common name (CN)	Required. The common name for the agent/satellite. By convention this should be the FQDN.

The following example shows how to generate a ticket on the master node icinga2-master1.localdomain for the agent icinga2-agent1.localdomain:

[root@icinga2-master1.localdomain /]# icinga2 pki ticket --cn icinga2-agent1.localdomain

Querying the Icinga 2 API on the master requires an ApiUser object with at least the actions/generate-ticket permission.

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/conf.d/api-users.conf

object ApiUser "client-pki-ticket" {
  password = "bea11beb7b810ea9ce6ea" //change this
  permissions = [ "actions/generate-ticket" ]
}

[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Retrieve the ticket on the master node `icinga2-master1.localdomain` with `curl`, for example:

 [root@icinga2-master1.localdomain /]# curl -k -s -u client-pki-ticket:bea11beb7b810ea9ce6ea -H 'Accept: application/json' \
 -X POST 'https://localhost:5665/v1/actions/generate-ticket' -d '{ "cn": "icinga2-agent1.localdomain" }'

Store that ticket number for the agent/satellite setup below.

Note

Never expose the ticket salt and/or ApiUser credentials to your client nodes. Example: Retrieve the ticket on the Puppet master node and send the compiled catalog to the authorized Puppet agent node which will invoke the automated setup steps.

On-Demand CSR Signing

The client can be a secondary master, satellite or agent. It sends a certificate signing request to specified parent node without any ticket. The admin on the primary master is responsible for reviewing and signing the requests with the private CA key.

This could either be directly the master, or a satellite which forwards the request to the signing master.

Advantages:

Central certificate request signing management.
No pre-generated ticket is required for client setups.

Disadvantages:

Asynchronous step for automated deployments.
Needs client verification on the master.

On-Demand CSR Signing: Preparation

Prior to using this mode, ensure that the following steps are taken on the signing master:

The master setup was run successfully. This includes:
- Generated a CA key pair
Restart of the master instance.

On-Demand CSR Signing: On the master

You can list pending certificate signing requests with the ca list CLI command.

[root@icinga2-master1.localdomain /]# icinga2 ca list
Fingerprint                                                      | Timestamp           | Signed | Subject
-----------------------------------------------------------------|---------------------|--------|--------
71700c28445109416dd7102038962ac3fd421fbb349a6e7303b6033ec1772850 | 2017/09/06 17:20:02 |        | CN = icinga2-agent2.localdomain

In order to show all requests, use the --all parameter.

[root@icinga2-master1.localdomain /]# icinga2 ca list --all
Fingerprint                                                      | Timestamp           | Signed | Subject
-----------------------------------------------------------------|---------------------|--------|--------
403da5b228df384f07f980f45ba50202529cded7c8182abf96740660caa09727 | 2017/09/06 17:02:40 | *      | CN = icinga2-agent1.localdomain
71700c28445109416dd7102038962ac3fd421fbb349a6e7303b6033ec1772850 | 2017/09/06 17:20:02 |        | CN = icinga2-agent2.localdomain

Tip: Add --json to the CLI command to retrieve the details in JSON format.

If you want to sign a specific request, you need to use the ca sign CLI command and pass its fingerprint as argument.

[root@icinga2-master1.localdomain /]# icinga2 ca sign 71700c28445109416dd7102038962ac3fd421fbb349a6e7303b6033ec1772850
information/cli: Signed certificate for 'CN = icinga2-agent2.localdomain'.

Note

ca list cannot be used as historical inventory. Certificate signing requests older than 1 week are automatically deleted.

You can also remove an undesired CSR using the ca remove command using the syntax as the ca sign command.

[root@pym ~]# icinga2 ca remove 5c31ca0e2269c10363a97e40e3f2b2cd56493f9194d5b1852541b835970da46e
information/cli: Certificate 5c31ca0e2269c10363a97e40e3f2b2cd56493f9194d5b1852541b835970da46e removed.

If you want to restore a certificate you have removed, you can use ca restore.

Agent/Satellite Setup

This section describes the setup of an agent or satellite connected to an existing master node setup. If you haven't done so already, please run the master setup.

Icinga 2 on the master node must be running and accepting connections on port 5665.

Agent/Satellite Setup on Linux

Please ensure that you've run all the steps mentioned in the agent/satellite section.

Install the Icinga 2 package and setup the required plugins if you haven't done so already.

The next step is to run the node wizard CLI command.

In this example we're generating a ticket on the master node icinga2-master1.localdomain for the agent icinga2-agent1.localdomain:

[root@icinga2-master1.localdomain /]# icinga2 pki ticket --cn icinga2-agent1.localdomain
4f75d2ecd253575fe9180938ebff7cbca262f96e

Note: You don't need this step if you have chosen to use On-Demand CSR Signing.

Start the wizard on the agent icinga2-agent1.localdomain:

[root@icinga2-agent1.localdomain /]# icinga2 node wizard

Welcome to the Icinga 2 Setup Wizard!

We will guide you through all required configuration details.

Press Enter or add y to start a satellite or agent setup.

Please specify if this is an agent/satellite setup ('n' installs a master setup) [Y/n]:

Press Enter to use the proposed name in brackets, or add a specific common name (CN). By convention this should be the FQDN.

Starting the Agent/Satellite setup routine...

Please specify the common name (CN) [icinga2-agent1.localdomain]: icinga2-agent1.localdomain

Specify the direct parent for this node. This could be your primary master icinga2-master1.localdomain or a satellite node in a multi level cluster scenario.

Please specify the parent endpoint(s) (master or satellite) where this node should connect to:
Master/Satellite Common Name (CN from your master/satellite node): icinga2-master1.localdomain

Press Enter or choose y to establish a connection to the parent node.

Do you want to establish a connection to the parent node from this node? [Y/n]:

Note:

If this node cannot connect to the parent node, choose n. The setup wizard will provide instructions for this scenario -- signing questions are disabled then.

Add the connection details for icinga2-master1.localdomain.

Please specify the master/satellite connection information:
Master/Satellite endpoint host (IP address or FQDN): 192.168.56.101
Master/Satellite endpoint port [5665]: 5665

You can add more parent nodes if necessary. Press Enter or choose n if you don't want to add any. This comes in handy if you have more than one parent node, e.g. two masters or two satellites.

Add more master/satellite endpoints? [y/N]:

Verify the parent node's certificate:

Parent certificate information:

 Subject:     CN = icinga2-master1.localdomain
 Issuer:      CN = Icinga CA
 Valid From:  Sep  7 13:41:24 2017 GMT
 Valid Until: Sep  3 13:41:24 2032 GMT
 Fingerprint: AC 99 8B 2B 3D B0 01 00 E5 21 FA 05 2E EC D5 A9 EF 9E AA E3

Is this information correct? [y/N]: y

The setup wizard fetches the parent node's certificate and ask you to verify this information. This is to prevent MITM attacks or any kind of untrusted parent relationship.

You can verify the fingerprint by running the following command on the node to connect to:

openssl x509 -noout -fingerprint -sha256 -in \
 "/var/lib/icinga2/certs/$(hostname --fqdn).crt"

Note: The certificate is not fetched if you have chosen not to connect to the parent node.

Proceed with adding the optional client ticket for CSR auto-signing:

Please specify the request ticket generated on your Icinga 2 master (optional).
 (Hint: # icinga2 pki ticket --cn 'icinga2-agent1.localdomain'):
4f75d2ecd253575fe9180938ebff7cbca262f96e

In case you've chosen to use On-Demand CSR Signing you can leave the ticket question blank.

Instead, Icinga 2 tells you to approve the request later on the master node.

No ticket was specified. Please approve the certificate signing request manually
on the master (see 'icinga2 ca list' and 'icinga2 ca sign --help' for details).

You can optionally specify a different bind host and/or port.

Please specify the API bind host/port (optional):
Bind Host []:
Bind Port []:

The next step asks you to accept configuration (required for config sync mode) and commands (required for command endpoint mode).

Accept config from parent node? [y/N]: y
Accept commands from parent node? [y/N]: y

Next you can optionally specify the local and parent zone names. This will be reflected in the generated zone configuration file.

Set the local zone name to something else, if you are installing a satellite or secondary master instance.

Local zone name [icinga2-agent1.localdomain]:

Set the parent zone name to something else than master if this agents connects to a satellite instance instead of the master.

Parent zone name [master]:

You can add more global zones in addition to global-templates and director-global if necessary. Press Enter or choose n, if you don't want to add any additional.

Reconfiguring Icinga...

Default global zones: global-templates director-global
Do you want to specify additional global zones? [y/N]: N

Last but not least the wizard asks you whether you want to disable the inclusion of the local configuration directory in conf.d, or not. Defaults to disabled, as agents either are checked via command endpoint, or they receive configuration synced from the parent zone.

Do you want to disable the inclusion of the conf.d directory [Y/n]: Y
Disabling the inclusion of the conf.d directory...

The wizard proceeds and you are good to go.

Done.

Now restart your Icinga 2 daemon to finish the installation!

Note

If you have chosen not to connect to the parent node, you cannot start Icinga 2 yet. The wizard asked you to manually copy the master's public CA certificate file into /var/lib/icinga2/certs/ca.crt.

You need to manually sign the CSR on the master node.

Restart Icinga 2 as requested.

[root@icinga2-agent1.localdomain /]# systemctl restart icinga2

Here is an overview of all parameters in detail:

Parameter	Description
Common name (CN)	Required. By convention this should be the host's FQDN. Defaults to the FQDN.
Master common name	Required. Use the common name you've specified for your master node before.
Establish connection to the parent node	Optional. Whether the node should attempt to connect to the parent node or not. Defaults to `y`.
Master/Satellite endpoint host	Required if the the agent needs to connect to the master/satellite. The parent endpoint's IP address or FQDN. This information is included in the `Endpoint` object configuration in the `zones.conf` file.
Master/Satellite endpoint port	Optional if the the agent needs to connect to the master/satellite. The parent endpoints's listening port. This information is included in the `Endpoint` object configuration.
Add more master/satellite endpoints	Optional. If you have multiple master/satellite nodes configured, add them here.
Parent Certificate information	Required. Verify that the connecting host really is the requested master node.
Request ticket	Optional. Add the ticket generated on the master.
API bind host	Optional. Allows to specify the address the ApiListener is bound to. For advanced usage only.
API bind port	Optional. Allows to specify the port the ApiListener is bound to. For advanced usage only (requires changing the default port 5665 everywhere).
Accept config	Optional. Whether this node accepts configuration sync from the master node (required for config sync mode). For security reasons this defaults to `n`.
Accept commands	Optional. Whether this node accepts command execution messages from the master node (required for command endpoint mode). For security reasons this defaults to `n`.
Local zone name	Optional. Allows to specify the name for the local zone. This comes in handy when this instance is a satellite, not an agent. Defaults to the FQDN.
Parent zone name	Optional. Allows to specify the name for the parent zone. This is important if the agent has a satellite instance as parent, not the master. Defaults to `master`.
Global zones	Optional. Allows to specify more global zones in addition to `global-templates` and `director-global`. Defaults to `n`.
Disable conf.d	Optional. Allows to disable the inclusion of the `conf.d` directory which holds local example configuration. Clients should retrieve their configuration from the parent node, or act as command endpoint execution bridge. Defaults to `y`.

The setup wizard will ensure that the following steps are taken:

Enable the api feature.
Create a certificate signing request (CSR) for the local node.
Request a signed certificate (optional with the provided ticket number) on the master node.
Allow to verify the parent node's certificate.
Store the signed agent/satellite certificate and ca.crt in /var/lib/icinga2/certs.
Update the zones.conf file with the new zone hierarchy.
Update /etc/icinga2/features-enabled/api.conf (accept_config, accept_commands) and constants.conf.
Update /etc/icinga2/icinga2.conf and comment out include_recursive "conf.d".

You can verify that the certificate files are stored in the /var/lib/icinga2/certs directory.

Note

If the agent is not directly connected to the certificate signing master, signing requests and responses might need some minutes to fully update the agent certificates.

If you have chosen to use On-Demand CSR Signing certificates need to be signed on the master first. Ticket-less setups require at least Icinga 2 v2.8+ on all involved instances.

Now that you've successfully installed a Linux/Unix agent/satellite instance, please proceed to the configuration modes.

Agent Setup on Windows

The supported Windows agent versions are listed here.

Requirements:

Microsoft .NET Framework 4.6 or higher. This is the default on Windows Server 2016 or later.
Universal C Runtime for Windows for Windows Server 2012 and older.

Agent Setup on Windows: Installer

Download the MSI-Installer package from https://packages.icinga.com/windows/. The preferred flavor is x86_64 for modern Windows systems.

The Windows package provides native monitoring plugin binaries to get you started more easily. The installer package also includes the NSClient++ package to allow using its built-in plugins. You can find more details in this chapter.

Note

Please note that Icinga 2 was designed to run as light-weight agent on Windows. There is no support for satellite instances.

Run the MSI-Installer package and follow the instructions shown in the screenshots.

The graphical installer offers to run the Icinga Agent setup wizard after the installation. Select the check box to proceed.

Tip

You can also run the Icinga agent setup wizard from the Start menu later.

Agent Setup on Windows: Configuration Wizard

On a fresh installation the setup wizard guides you through the initial configuration. It also provides a mechanism to send a certificate request to the CSR signing master.

The following configuration details are required:

Parameter	Description
Instance name	Required. By convention this should be the host's FQDN. Defaults to the FQDN.
Setup ticket	Optional. Paste the previously generated ticket number. If left blank, the certificate request must be signed on the master node.

Fill in the required information and click Add to add a new master connection.

Add the following details:

Parameter	Description
Instance name	Required. The master/satellite endpoint name where this agent is a direct child of.
Master/Satellite endpoint host	Required. The master or satellite's IP address or FQDN. This information is included in the `Endpoint` object configuration in the `zones.conf` file.
Master/Satellite endpoint port	Optional. The master or satellite's listening port. This information is included in the `Endpoint` object configuration.

When needed you can add an additional global zone (the zones global-templates and director-global are added by default):

Optionally enable the following settings:

Parameter	Description
Accept commands from master/satellite instance(s)	Optional. Whether this node accepts command execution messages from the master node (required for command endpoint mode). For security reasons this is disabled by default.
Accept config updates from master/satellite instance(s)	Optional. Whether this node accepts configuration sync from the master node (required for config sync mode). For security reasons this is disabled by default.
Run Icinga 2 service as this user	Optional. Specify a different Windows user. This defaults to `NT AUTHORITY\Network Service` and is required for more privileged service checks.
Install/Update bundled NSClient++	Optional. The Windows installer bundles the NSClient++ installer for additional plugin checks.
Disable including local 'conf.d' directory	Optional. Allows to disable the `include_recursive "conf.d"` directive except for the `api-users.conf` file in the `icinga2.conf` file. Defaults to `true`.

Verify the certificate from the master/satellite instance where this node should connect to.

Bundled NSClient++ Setup

If you have chosen to install/update the NSClient++ package, the Icinga 2 setup wizard asks you to do so.

Choose the Generic setup.

Choose the Custom setup type.

NSClient++ does not install a sample configuration by default. Change this as shown in the screenshot.

Generate a secure password and enable the web server module. Note: The webserver module is available starting with NSClient++ 0.5.0. Icinga 2 v2.6+ is required which includes this version.

Finish the installation.

Open a web browser and navigate to https://localhost:8443. Enter the password you've configured during the setup. In case you lost it, look into the C:\Program Files\NSClient++\nsclient.ini configuration file.

The NSClient++ REST API can be used to query metrics. check_nscp_api uses this transport method.

Finish Windows Agent Setup

Finish the Windows setup wizard.

If you did not provide a setup ticket, you need to sign the certificate request on the master. The setup wizards tells you to do so. The Icinga 2 service is running at this point already and will automatically receive and update a signed client certificate.

Icinga 2 is automatically started as a Windows service.

The Icinga 2 configuration is stored inside the C:\ProgramData\icinga2 directory. Click Examine Config in the setup wizard to open a new Explorer window.

The configuration files can be modified with your favorite editor e.g. Notepad++ or vim in Powershell (via chocolatey).

In order to use the top down agent configuration prepare the following steps.

You don't need any local configuration on the agent except for CheckCommand definitions which can be synced using the global zone above. Therefore disable the inclusion of the conf.d directory in the icinga2.conf file.

Navigate to C:\ProgramData\icinga2\etc\icinga2 and open the icinga2.conf file in your preferred editor. Remove or comment (//) the following line:

// Commented out, not required on an agent with top down mode
//include_recursive "conf.d"

Note

Packages >= 2.9 provide an option in the setup wizard to disable this. Defaults to disabled.

Validate the configuration on Windows open an administrative Powershell and run the following command:

C:\> cd C:\Program Files\ICINGA2\sbin

C:\Program Files\ICINGA2\sbin> .\icinga2.exe daemon -C

Note: You have to run this command in a shell with administrator privileges.

Now you need to restart the Icinga 2 service. Run services.msc from the start menu and restart the icinga2 service. Alternatively open an administrative Powershell and run the following commands:

C:\> Restart-Service icinga2

C:\> Get-Service icinga2

Now that you've successfully installed a Windows agent, please proceed to the detailed configuration modes.

Configuration Modes

There are different ways to ensure that the Icinga 2 cluster nodes execute checks, send notifications, etc.

The preferred method is to configure monitoring objects on the master and distribute the configuration to satellites and agents.

The following chapters explain this in detail with hands-on manual configuration examples. You should test and implement this once to fully understand how it works.

Once you are familiar with Icinga 2 and distributed monitoring, you can start with additional integrations to manage and deploy your configuration:

Icinga Director provides a web interface to manage configuration and also allows to sync imported resources (CMDB, PuppetDB, etc.)
Ansible Roles
Puppet Module
Chef Cookbook

More details can be found here.

Top Down

There are two different behaviors with check execution:

Send a command execution event remotely: The scheduler still runs on the parent node.
Sync the host/service objects directly to the child node: Checks are executed locally.

Again, technically it does not matter whether this is an agent or a satellite which is receiving configuration or command execution events.

Top Down Command Endpoint

This mode forces the Icinga 2 node to execute commands remotely on a specified endpoint. The host/service object configuration is located on the master/satellite and the agent only needs the CheckCommand object definitions available.

Every endpoint has its own remote check queue. The amount of checks executed simultaneously can be limited on the endpoint with the MaxConcurrentChecks constant defined in constants.conf. Icinga 2 may discard check requests, if the remote check queue is full.

Advantages:

No local checks need to be defined on the child node (agent).
Light-weight remote check execution (asynchronous events).
No replay log is necessary for the child node.
Pin checks to specific endpoints (if the child zone consists of 2 endpoints).

Disadvantages:

If the child node is not connected, no more checks are executed.
Requires additional configuration attribute specified in host/service objects.
Requires local CheckCommand object configuration. Best practice is to use a global config zone.

To make sure that all nodes involved will accept configuration and/or commands, you need to configure the Zone and Endpoint hierarchy on all nodes.

icinga2-master1.localdomain is the configuration master in this scenario.
icinga2-agent1.localdomain acts as agent which receives command execution messages via command endpoint from the master. In addition, it receives the global check command configuration from the master.

Include the endpoint and zone configuration on both nodes in the file /etc/icinga2/zones.conf.

The endpoint configuration could look like this, for example:

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  host = "192.168.56.101"
}

object Endpoint "icinga2-agent1.localdomain" {
  host = "192.168.56.111"
  log_duration = 0 // Disable the replay log for command endpoint agents
}

Next, you need to define two zones. There is no naming convention, best practice is to either use master, satellite/agent-fqdn or to choose region names for example Europe, USA and Asia, though.

Note: Each agent requires its own zone and endpoint configuration. Best practice is to use the agent's FQDN for all object names.

The master zone is a parent of the icinga2-agent1.localdomain zone:

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/zones.conf

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain" ] //array with endpoint names
}

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]

  parent = "master" //establish zone hierarchy
}

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/icinga2.conf

// Commented out, not required on an agent as command endpoint
//include_recursive "conf.d"

Note

Packages >= 2.9 provide an option in the setup wizard to disable this. Defaults to disabled.

Now it is time to validate the configuration and to restart the Icinga 2 daemon on both nodes.

Example on CentOS 7:

[root@icinga2-agent1.localdomain /]# icinga2 daemon -C
[root@icinga2-agent1.localdomain /]# systemctl restart icinga2

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Once the agents have successfully connected, you are ready for the next step: execute a remote check on the agent using the command endpoint.

Include the host and service object configuration in the master zone -- this will help adding a secondary master for high-availability later.

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/master

Add the host and service objects you want to monitor. There is no limitation for files and directories -- best practice is to sort things by type.

By convention a master/satellite/agent host object should use the same name as the endpoint object. You can also add multiple hosts which execute checks against remote services/agents.

The following example adds the agent_endpoint custom variable to the host and stores its name (FQDN). Versions older than 2.11 used the client_endpoint custom variable.

This custom variable serves two purposes: 1) Service apply rules can match against it. 2) Apply rules can retrieve its value and assign it to the command_endpoint attribute.

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim hosts.conf

object Host "icinga2-agent1.localdomain" {
  check_command = "hostalive" //check is executed on the master
  address = "192.168.56.111"

  vars.agent_endpoint = name //follows the convention that host name == endpoint name
}

Given that you are monitoring a Linux agent, add a remote disk check.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim services.conf

apply Service "disk" {
  check_command = "disk"

  // Specify the remote agent as command execution endpoint, fetch the host custom variable
  command_endpoint = host.vars.agent_endpoint

  // Only assign where a host is marked as agent endpoint
  assign where host.vars.agent_endpoint
}

If you have your own custom CheckCommand definition, add it to the global zone:

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/global-templates
[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/global-templates/commands.conf

object CheckCommand "my-cmd" {
  //...
}

Save the changes and validate the configuration on the master node:

[root@icinga2-master1.localdomain /]# icinga2 daemon -C

Restart the Icinga 2 daemon (example for CentOS 7):

[root@icinga2-master1.localdomain /]# systemctl restart icinga2

The following steps will happen:

Icinga 2 validates the configuration on icinga2-master1.localdomain and restarts.
The icinga2-master1.localdomain node schedules and executes the checks.
The icinga2-agent1.localdomain node receives the execute command event with additional command parameters.
The icinga2-agent1.localdomain node maps the command parameters to the local check command, executes the check locally, and sends back the check result message.

As you can see, no interaction from your side is required on the agent itself, and it's not necessary to reload the Icinga 2 service on the agent.

You have learned the basics about command endpoint checks. Proceed with the scenarios section where you can find detailed information on extending the setup.

Top Down Config Sync

This mode syncs the object configuration files within specified zones. It comes in handy if you want to configure everything on the master node and sync the satellite checks (disk, memory, etc.). The satellites run their own local scheduler and will send the check result messages back to the master.

Advantages:

Sync the configuration files from the parent zone to the child zones.
No manual restart is required on the child nodes, as syncing, validation, and restarts happen automatically.
Execute checks directly on the child node's scheduler.
Replay log if the connection drops (important for keeping the check history in sync, e.g. for SLA reports).
Use a global zone for syncing templates, groups, etc.

Disadvantages:

Requires a config directory on the master node with the zone name underneath /etc/icinga2/zones.d.
Additional zone and endpoint configuration needed.
Replay log is replicated on reconnect after connection loss. This might increase the data transfer and create an overload on the connection.

Note

This mode only supports configuration text files for Icinga. Do not abuse this for syncing binaries, this is not supported and may harm your production environment. The config sync uses checksums to detect changes, binaries may trigger reload loops.

This is a fair warning. If you want to deploy plugin binaries, create packages for dependency management and use infrastructure lifecycle tools such as Foreman, Puppet, Ansible, etc.

To make sure that all involved nodes accept configuration and/or commands, you need to configure the Zone and Endpoint hierarchy on all nodes.

icinga2-master1.localdomain is the configuration master in this scenario.
icinga2-satellite1.localdomain acts as satellite which receives configuration from the master. Checks are scheduled locally.

Include the endpoint and zone configuration on both nodes in the file /etc/icinga2/zones.conf.

The endpoint configuration could look like this:

[root@icinga2-satellite1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  host = "192.168.56.101"
}

object Endpoint "icinga2-satellite1.localdomain" {
  host = "192.168.56.105"
}

The master zone is a parent of the satellite zone:

[root@icinga2-agent2.localdomain /]# vim /etc/icinga2/zones.conf

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain" ] //array with endpoint names
}

object Zone "satellite" {
  endpoints = [ "icinga2-satellite1.localdomain" ]

  parent = "master" //establish zone hierarchy
}

Edit the api feature on the satellite icinga2-satellite1.localdomain in the /etc/icinga2/features-enabled/api.conf file and set accept_config to true.

[root@icinga2-satellite1.localdomain /]# vim /etc/icinga2/features-enabled/api.conf

object ApiListener "api" {
   //...
   accept_config = true
}

Now it is time to validate the configuration and to restart the Icinga 2 daemon on both nodes.

Example on CentOS 7:

[root@icinga2-satellite1.localdomain /]# icinga2 daemon -C
[root@icinga2-satellite1.localdomain /]# systemctl restart icinga2

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Tip: Best practice is to use a global zone for common configuration items (check commands, templates, groups, etc.).

Once the satellite(s) have connected successfully, it's time for the next step: execute a local check on the satellite using the configuration sync.

Navigate to /etc/icinga2/zones.d on your master node icinga2-master1.localdomain and create a new directory with the same name as your satellite/agent zone name:

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/satellite

Add the host and service objects you want to monitor. There is no limitation for files and directories -- best practice is to sort things by type.

By convention a master/satellite/agent host object should use the same name as the endpoint object. You can also add multiple hosts which execute checks against remote services/agents via command endpoint checks.

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/satellite
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim hosts.conf

object Host "icinga2-satellite1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.112"
  zone = "master" //optional trick: sync the required host object to the satellite, but enforce the "master" zone to execute the check
}

Given that you are monitoring a Linux satellite add a local disk check.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim services.conf

object Service "disk" {
  host_name = "icinga2-satellite1.localdomain"

  check_command = "disk"
}

Save the changes and validate the configuration on the master node:

[root@icinga2-master1.localdomain /]# icinga2 daemon -C

Restart the Icinga 2 daemon (example for CentOS 7):

[root@icinga2-master1.localdomain /]# systemctl restart icinga2

The following steps will happen:

Icinga 2 validates the configuration on icinga2-master1.localdomain.
Icinga 2 copies the configuration into its zone config store in /var/lib/icinga2/api/zones.
The icinga2-master1.localdomain node sends a config update event to all endpoints in the same or direct child zones.
The icinga2-satellite1.localdomain node accepts config and populates the local zone config store with the received config files.
The icinga2-satellite1.localdomain node validates the configuration and automatically restarts.

Again, there is no interaction required on the satellite itself.

You can also use the config sync inside a high-availability zone to ensure that all config objects are synced among zone members.

Note: You can only have one so-called "config master" in a zone which stores the configuration in the zones.d directory. Multiple nodes with configuration files in the zones.d directory are not supported.

Now that you've learned the basics about the configuration sync, proceed with the scenarios section where you can find detailed information on extending the setup.

If you are eager to start fresh instead you might take a look into the Icinga Director.

Scenarios

The following examples should give you an idea on how to build your own distributed monitoring environment. We've seen them all in production environments and received feedback from our community and partner support channels:

Single master with agents.
HA master with agents as command endpoint
Three level cluster with config HA masters, satellites receiving config sync, and agents checked using command endpoint.

You can also extend the cluster tree depth to four levels e.g. with 2 satellite levels. Just keep in mind that multiple levels become harder to debug in case of errors.

You can also start with a single master setup, and later add a secondary master endpoint. This requires an extra step with the initial sync for cloning the runtime state. This is described in detail here.

Master with Agents

In this scenario, a single master node runs the check scheduler, notifications and IDO database backend and uses the command endpoint mode to execute checks on the remote agents.

icinga2-master1.localdomain is the primary master node.
icinga2-agent1.localdomain and icinga2-agent2.localdomain are two child nodes as agents.

Setup requirements:

Set up icinga2-master1.localdomain as master.
Set up icinga2-agent1.localdomain and icinga2-agent2.localdomain as agent.

Edit the zones.conf configuration file on the master:

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // That's us
}

object Endpoint "icinga2-agent1.localdomain" {
  host = "192.168.56.111" // The master actively tries to connect to the agent
  log_duration = 0 // Disable the replay log for command endpoint agents
}

object Endpoint "icinga2-agent2.localdomain" {
  host = "192.168.56.112" // The master actively tries to connect to the agent
  log_duration = 0 // Disable the replay log for command endpoint agents
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain" ]
}

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]

  parent = "master"
}

object Zone "icinga2-agent2.localdomain" {
  endpoints = [ "icinga2-agent2.localdomain" ]

  parent = "master"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}
object Zone "director-global" {
  global = true
}

The two agent nodes do not need to know about each other. The only important thing is that they know about the parent zone and their endpoint members (and optionally the global zone).

If you specify the host attribute in the icinga2-master1.localdomain endpoint object, the agent will actively try to connect to the master node. Since you've specified the agent endpoint's attribute on the master node already, you don't want the agents to connect to the master. Choose one connection direction.

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
}

object Endpoint "icinga2-agent1.localdomain" {
  // That's us
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain" ]
}

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]

  parent = "master"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}
object Zone "director-global" {
  global = true
}

[root@icinga2-agent2.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
}

object Endpoint "icinga2-agent2.localdomain" {
  // That's us
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain" ]
}

object Zone "icinga2-agent2.localdomain" {
  endpoints = [ "icinga2-agent2.localdomain" ]

  parent = "master"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}
object Zone "director-global" {
  global = true
}

Now it is time to define the two agent hosts and apply service checks using the command endpoint execution method on them. Note: You can also use the config sync mode here.

Create a new configuration directory on the master node:

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/master

Add the two agent nodes as host objects:

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim hosts.conf

object Host "icinga2-agent1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.111"

  vars.agent_endpoint = name //follows the convention that host name == endpoint name
}

object Host "icinga2-agent2.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.112"

  vars.agent_endpoint = name //follows the convention that host name == endpoint name
}

Add services using command endpoint checks:

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim services.conf

apply Service "ping4" {
  check_command = "ping4"

  //check is executed on the master node
  assign where host.address
}

apply Service "disk" {
  check_command = "disk"

  // Execute the check on the remote command endpoint
  command_endpoint = host.vars.agent_endpoint

  // Assign the service onto an agent
  assign where host.vars.agent_endpoint
}

Validate the configuration and restart Icinga 2 on the master node icinga2-master1.localdomain.

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Open Icinga Web 2 and check the two newly created agent hosts with two new services -- one executed locally (ping4) and one using command endpoint (disk).

Note

You don't necessarily need to add the agent endpoint/zone configuration objects into the master's zones.conf file. Instead, you can put them into /etc/icinga2/zones.d/master either in hosts.conf shown above, or in a new file called agents.conf.

Tip:

It's a good idea to add health checks to make sure that your cluster notifies you in case of failure.

In terms of health checks, consider adding the following for this scenario:

Master node(s) check the connection to the agents
Optional: Add dependencies for the agent host to prevent unwanted notifications when agents are unreachable

Proceed in this chapter.

High-Availability Master with Agents

This scenario is similar to the one in the previous section. The only difference is that we will now set up two master nodes in a high-availability setup. These nodes must be configured as zone and endpoints objects.

The setup uses the capabilities of the Icinga 2 cluster. All zone members replicate cluster events between each other. In addition to that, several Icinga 2 features can enable HA functionality.

Best practice is to run the database backend on a dedicated server/cluster and only expose a virtual IP address to Icinga and the IDO feature. By default, only one endpoint will actively write to the backend then. Typical setups for MySQL clusters involve Master-Master-Replication (Master-Slave-Replication in both directions) or Galera, more tips can be found on our community forums. The IDO object must have the same instance_name on all master nodes.

Note: All nodes in the same zone require that you enable the same features for high-availability (HA).

Overview:

icinga2-master1.localdomain is the config master master node.
icinga2-master2.localdomain is the secondary master master node without config in zones.d.
icinga2-agent1.localdomain and icinga2-agent2.localdomain are two child nodes as agents.

Setup requirements:

Set up icinga2-master1.localdomain as master.
Set up icinga2-master2.localdomain as satellite (we will modify the generated configuration).
Set up icinga2-agent1.localdomain and icinga2-agent2.localdomain as agents (when asked for adding multiple masters, set to y and add the secondary master icinga2-master2.localdomain).

In case you don't want to use the CLI commands, you can also manually create and sync the required TLS certificates. We will modify and discuss all the details of the automatically generated configuration here.

Since there are now two nodes in the same zone, we must consider the high-availability features.

Checks and notifications are balanced between the two master nodes. That's fine, but it requires check plugins and notification scripts to exist on both nodes.
The IDO feature will only be active on one node by default. Since all events are replicated between both nodes, it is easier to just have one central database.

One possibility is to use a dedicated MySQL cluster VIP (external application cluster) and leave the IDO feature with enabled HA capabilities. Alternatively, you can disable the HA feature and write to a local database on each node. Both methods require that you configure Icinga Web 2 accordingly (monitoring backend, IDO database, used transports, etc.).

Note

You can also start with a single master shown here and later add the second master. This requires an extra step with the initial sync for cloning the runtime state after done. Once done, proceed here.

In this scenario, we are not adding the agent configuration immediately to the zones.conf file but will establish the hierarchy later.

The first master looks like this:

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // That's us
}

object Endpoint "icinga2-master2.localdomain" {
  host = "192.168.56.102" // Actively connect to the secondary master
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain", "icinga2-master2.localdomain" ]
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}
object Zone "director-global" {
  global = true
}

The secondary master waits for connection attempts from the first master, and therefore does not try to connect to it again.

[root@icinga2-master2.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // The first master already connects to us
}

object Endpoint "icinga2-master2.localdomain" {
  // That's us
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain", "icinga2-master2.localdomain" ]
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}
object Zone "director-global" {
  global = true
}

Restart both masters and ensure the initial connection and TLS handshake works.

The two agent nodes do not need to know about each other. The only important thing is that they know about the parent zone and their endpoint members (and optionally about the global zone).

If you specify the host attribute in the icinga2-master1.localdomain and icinga2-master2.localdomain endpoint objects, the agent will actively try to connect to the master node. Since we've specified the agent endpoint's attribute on the master node already, we don't want the agent to connect to the master nodes. Choose one connection direction.

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
}

object Endpoint "icinga2-master2.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
}

object Endpoint "icinga2-agent1.localdomain" {
  // That's us
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain", "icinga2-master2.localdomain" ]
}

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]

  parent = "master"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}
object Zone "director-global" {
  global = true
}

[root@icinga2-agent2.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
}

object Endpoint "icinga2-master2.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
}

object Endpoint "icinga2-agent2.localdomain" {
  //That's us
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain", "icinga2-master2.localdomain" ]
}

object Zone "icinga2-agent2.localdomain" {
  endpoints = [ "icinga2-agent2.localdomain" ]

  parent = "master"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}
object Zone "director-global" {
  global = true
}

Now it is time to define the two agent hosts and apply service checks using the command endpoint execution method.

Create a new configuration directory on the master node icinga2-master1.localdomain. Note: The secondary master node icinga2-master2.localdomain receives the configuration using the config sync mode.

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/master

Add the two agent nodes with their zone/endpoint and host object configuration.

Note

In order to keep things in sync between the two HA masters, keep the zones.conf file as small as possible.

You can create the agent zone and endpoint objects inside the master zone and have them synced to the secondary master. The cluster config sync enforces a reload allowing the secondary master to connect to the agents as well.

Edit the zones.conf file and ensure that the agent zone/endpoint objects are not specified in there.

Then navigate into /etc/icinga2/zones.d/master and create a new file agents.conf.

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim agents.conf

//-----------------------------------------------
// Endpoints

object Endpoint "icinga2-agent1.localdomain" {
  host = "192.168.56.111" // The master actively tries to connect to the agent
  log_duration = 0 // Disable the replay log for command endpoint agents
}

object Endpoint "icinga2-agent2.localdomain" {
  host = "192.168.56.112" // The master actively tries to connect to the agent
  log_duration = 0 // Disable the replay log for command endpoint agents
}

//-----------------------------------------------
// Zones

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]

  parent = "master"
}

object Zone "icinga2-agent2.localdomain" {
  endpoints = [ "icinga2-agent2.localdomain" ]

  parent = "master"
}

Whenever you need to add an agent again, edit the mentioned files.

Next, create the corresponding host objects for the agents. Use the same names for host and endpoint objects.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim hosts.conf

object Host "icinga2-agent1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.111"
  vars.agent_endpoint = name //follows the convention that host name == endpoint name
}

object Host "icinga2-agent2.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.112"
  vars.agent_endpoint = name //follows the convention that host name == endpoint name
}

Add services using command endpoint checks:

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim services.conf

apply Service "ping4" {
  check_command = "ping4"

  // Check is executed on the master node
  assign where host.address
}

apply Service "disk" {
  check_command = "disk"

  // Check is executed on the remote command endpoint
  command_endpoint = host.vars.agent_endpoint

  assign where host.vars.agent_endpoint
}

Validate the configuration and restart Icinga 2 on the master node icinga2-master1.localdomain.

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Open Icinga Web 2 and check the two newly created agent hosts with two new services -- one executed locally (ping4) and one using command endpoint (disk).

Tip:

It's a good idea to add health checks to make sure that your cluster notifies you in case of failure.

In terms of health checks, consider adding the following for this scenario:

Master node(s) check the connection to the agents
Optional: Add dependencies for the agent host to prevent unwanted notifications when agents are unreachable

Proceed in this chapter.

Three Levels with Masters, Satellites and Agents

This scenario combines everything you've learned so far: High-availability masters, satellites receiving their configuration from the master zone, and agents checked via command endpoint from the satellite zones.

Tip:

It can get complicated, so grab a pen and paper and bring your thoughts to life. Play around with a test setup before using it in a production environment!

There are various reasons why you might want to have satellites in your environment. The following list explains the more common ones.

Monitor remote locations. Besides reducing connections and traffic between different locations this setup also helps when the network connection to the remote network is lost. Satellites will keep checking and collecting data on their own and will send their check results when the connection is restored.
Reduce connections between security zones. Satellites in a different zone (e.g. DMZ) than your masters will help reduce connections through firewalls.
Offload resource hungry checks to other hosts. In very big setups running lots of plugins on your masters or satellites might have a significant impact on the performance during times of high load. You can introduce another level of satellites just to run these plugins and send their results to the upstream hosts.

Overview:

icinga2-master1.localdomain is the configuration master master node.
icinga2-master2.localdomain is the secondary master master node without configuration in zones.d.
icinga2-satellite1.localdomain and icinga2-satellite2.localdomain are satellite nodes in a master child zone. They forward CSR signing requests to the master zone.
icinga2-agent1.localdomain and icinga2-agent2.localdomain are two child nodes as agents.

Setup requirements:

Set up icinga2-master1.localdomain as master.
Set up icinga2-master2.localdomain, icinga2-satellite1.localdomain and icinga2-satellite2.localdomain as agents (we will modify the generated configuration).
Set up icinga2-agent1.localdomain and icinga2-agent2.localdomain as agents.

When being asked for the parent endpoint providing CSR auto-signing capabilities, please add one of the satellite nodes. Note: This requires Icinga 2 v2.8+ and the CA Proxy on all master, satellite and agent nodes.

Example for icinga2-agent1.localdomain:

Please specify the parent endpoint(s) (master or satellite) where this node should connect to:

Parent endpoint is the first satellite icinga2-satellite1.localdomain:

Master/Satellite Common Name (CN from your master/satellite node): icinga2-satellite1.localdomain
Do you want to establish a connection to the parent node from this node? [Y/n]: y

Please specify the master/satellite connection information:
Master/Satellite endpoint host (IP address or FQDN): 192.168.56.105
Master/Satellite endpoint port [5665]: 5665

Add the second satellite icinga2-satellite2.localdomain as parent:

Add more master/satellite endpoints? [y/N]: y

Master/Satellite Common Name (CN from your master/satellite node): icinga2-satellite2.localdomain
Do you want to establish a connection to the parent node from this node? [Y/n]: y

Please specify the master/satellite connection information:
Master/Satellite endpoint host (IP address or FQDN): 192.168.56.106
Master/Satellite endpoint port [5665]: 5665

Add more master/satellite endpoints? [y/N]: n

The specified parent nodes will forward the CSR signing request to the master instances.

Proceed with adding the optional client ticket for CSR auto-signing:

Please specify the request ticket generated on your Icinga 2 master (optional).
 (Hint: # icinga2 pki ticket --cn 'icinga2-agent1.localdomain'):
4f75d2ecd253575fe9180938ebff7cbca262f96e

In case you've chosen to use On-Demand CSR Signing you can leave the ticket question blank.

Instead, Icinga 2 tells you to approve the request later on the master node.

No ticket was specified. Please approve the certificate signing request manually
on the master (see 'icinga2 ca list' and 'icinga2 ca sign --help' for details).

You can optionally specify a different bind host and/or port.

Please specify the API bind host/port (optional):
Bind Host []:
Bind Port []:

The next step asks you to accept configuration (required for config sync mode) and commands (required for command endpoint mode).

Accept config from parent node? [y/N]: y
Accept commands from parent node? [y/N]: y

Next you can optionally specify the local and parent zone names. This will be reflected in the generated zone configuration file.

Local zone name [icinga2-agent1.localdomain]: icinga2-agent1.localdomain

Set the parent zone name to satellite for this agent.

Parent zone name [master]: satellite

You can add more global zones in addition to global-templates and director-global if necessary. Press Enter or choose n, if you don't want to add any additional.

Reconfiguring Icinga...

Default global zones: global-templates director-global
Do you want to specify additional global zones? [y/N]: N

Last but not least the wizard asks you whether you want to disable the inclusion of the local configuration directory in conf.d, or not. Defaults to disabled, since agents are checked via command endpoint and the example configuration would collide with this mode.

Do you want to disable the inclusion of the conf.d directory [Y/n]: Y
Disabling the inclusion of the conf.d directory...

We'll discuss the details of the required configuration below. Most of this configuration can be rendered by the setup wizards.

The zone hierarchy can look like this. We'll define only the directly connected zones here.

The master instances should actively connect to the satellite instances, therefore the configuration on icinga2-master1.localdomain and icinga2-master2.localdomain must include the host attribute for the satellite endpoints:

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // That's us
}

object Endpoint "icinga2-master2.localdomain" {
  host = "192.168.56.102" // Actively connect to the second master.
}

object Endpoint "icinga2-satellite1.localdomain" {
  host = "192.168.56.105" // Actively connect to the satellites.
}

object Endpoint "icinga2-satellite2.localdomain" {
  host = "192.168.56.106" // Actively connect to the satellites.
}

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain", "icinga2-master2.localdomain" ]
}

The endpoint configuration on the secondary master looks similar, but changes the connection attributes - the first master already tries to connect, there is no need for a secondary attempt.

[root@icinga2-master2.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // First master already connects to us
}

object Endpoint "icinga2-master2.localdomain" {
  // That's us
}

object Endpoint "icinga2-satellite1.localdomain" {
  host = "192.168.56.105" // Actively connect to the satellites.
}

object Endpoint "icinga2-satellite2.localdomain" {
  host = "192.168.56.106" // Actively connect to the satellites.
}

The zone configuration on both masters looks the same. Add this to the corresponding zones.conf entries for the endpoints.

object Zone "satellite" {
  endpoints = [ "icinga2-satellite1.localdomain", "icinga2-satellite2.localdomain" ]

  parent = "master"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}

object Zone "director-global" {
  global = true
}

In contrast to that, the satellite instances icinga2-satellite1.localdomain and icinga2-satellite2.localdomain should not actively connect to the master instances.

[root@icinga2-satellite1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // This endpoint will connect to us
}

object Endpoint "icinga2-master2.localdomain" {
  // This endpoint will connect to us
}

object Endpoint "icinga2-satellite1.localdomain" {
  // That's us
}

object Endpoint "icinga2-satellite2.localdomain" {
  host = "192.168.56.106" // Actively connect to the secondary satellite
}

Again, only one side is required to establish the connection inside the HA zone. Since satellite1 already connects to satellite2, leave out the host attribute for icinga2-satellite1.localdomain on satellite2.

[root@icinga2-satellite2.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-master1.localdomain" {
  // This endpoint will connect to us
}

object Endpoint "icinga2-master2.localdomain" {
  // This endpoint will connect to us
}

object Endpoint "icinga2-satellite1.localdomain" {
  // First satellite already connects to us
}

object Endpoint "icinga2-satellite2.localdomain" {
  // That's us
}

The zone configuration on both satellites looks the same. Add this to the corresponding zones.conf entries for the endpoints.

object Zone "master" {
  endpoints = [ "icinga2-master1.localdomain", "icinga2-master2.localdomain" ]
}

object Zone "satellite" {
  endpoints = [ "icinga2-satellite1.localdomain", "icinga2-satellite2.localdomain" ]

  parent = "master"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}

object Zone "director-global" {
  global = true
}

Keep in mind to control the endpoint connection direction using the host attribute, also for other endpoints in the same zone.

Since we want to use top down command endpoint checks, we must configure the agent endpoint and zone objects.

In order to minimize the effort, we'll sync the agent zone and endpoint configuration to the satellites where the connection information is needed as well. Note: This only works with satellite and agents, since there already is a trust relationship between the master and the satellite zone. The cluster config sync to the satellite invokes an automated reload causing the agent connection attempts.

icinga2-master1.localdomain is the configuration master where everything is stored:

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/{master,satellite,global-templates}
[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/satellite

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim icinga2-agent1.localdomain.conf

object Endpoint "icinga2-agent1.localdomain" {
  host = "192.168.56.111" // The satellite actively tries to connect to the agent
  log_duration = 0 // Disable the replay log for command endpoint agents
}

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]

  parent = "satellite"
}

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim icinga2-agent2.localdomain.conf

object Endpoint "icinga2-agent2.localdomain" {
  host = "192.168.56.112" // The satellite actively tries to connect to the agent
  log_duration = 0 // Disable the replay log for command endpoint agents
}

object Zone "icinga2-agent2.localdomain" {
  endpoints = [ "icinga2-agent2.localdomain" ]

  parent = "satellite"
}

The two agent nodes do not need to know about each other. The only important thing is that they know about the parent zone (the satellite) and their endpoint members (and optionally the global zone).

Tipp

In the example above we've specified the host attribute in the agent endpoint configuration. In this mode, the satellites actively connect to the agents. This costs some resources on the satellite -- if you prefer to offload the connection attempts to the agent, or your DMZ requires this, you can also change the connection direction.

Don't set the host attribute for the agent endpoints put into zones.d/satellite.

Modify each agent's zones.conf file and add the host attribute to all parent satellites. You can automate this with using the node wizard/setup CLI commands.

The agents are waiting for the satellites to connect, therefore they don't specify the host attribute in the endpoint objects locally.

Example for icinga2-agent1.localdomain:

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-satellite1.localdomain" {
  // Do not actively connect to the satellite by leaving out the 'host' attribute
}

object Endpoint "icinga2-satellite2.localdomain" {
  // Do not actively connect to the satellite by leaving out the 'host' attribute
}

object Endpoint "icinga2-agent1.localdomain" {
  // That's us
}

object Zone "satellite" {
  endpoints = [ "icinga2-satellite1.localdomain", "icinga2-satellite2.localdomain" ]
}

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]

  parent = "satellite"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}

object Zone "director-global" {
  global = true
}

Example for icinga2-agent2.localdomain:

[root@icinga2-agent2.localdomain /]# vim /etc/icinga2/zones.conf

object Endpoint "icinga2-satellite1.localdomain" {
  // Do not actively connect to the satellite by leaving out the 'host' attribute
}

object Endpoint "icinga2-satellite2.localdomain" {
  // Do not actively connect to the satellite by leaving out the 'host' attribute
}

object Endpoint "icinga2-agent2.localdomain" {
  // That's us
}

object Zone "satellite" {
  endpoints = [ "icinga2-satellite1.localdomain", "icinga2-satellite2.localdomain" ]
}

object Zone "icinga2-agent2.localdomain" {
  endpoints = [ "icinga2-agent2.localdomain" ]

  parent = "satellite"
}

/* sync global commands */
object Zone "global-templates" {
  global = true
}

object Zone "director-global" {
  global = true
}

Now it is time to define the two agents hosts on the master, sync them to the satellites and apply service checks using the command endpoint execution method to them. Add the two agent nodes as host objects to the satellite zone.

We've already created the directories in /etc/icinga2/zones.d including the files for the zone and endpoint configuration for the agents.

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/satellite

Add the host object configuration for the icinga2-agent1.localdomain agent. You should have created the configuration file in the previous steps and it should contain the endpoint and zone object configuration already.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim icinga2-agent1.localdomain.conf

object Host "icinga2-agent1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.111"

  vars.agent_endpoint = name // Follows the convention that host name == endpoint name
}

Add the host object configuration for the icinga2-agent2.localdomain agent configuration file:

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim icinga2-agent2.localdomain.conf

object Host "icinga2-agent2.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.112"

  vars.agent_endpoint = name // Follows the convention that host name == endpoint name
}

Add a service object which is executed on the satellite nodes (e.g. ping4). Pin the apply rule to the satellite zone only.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim services.conf

apply Service "ping4" {
  check_command = "ping4"

  // Check is executed on the satellite node
  assign where host.zone == "satellite" && host.address
}

Add services using command endpoint checks. Pin the apply rules to the satellite zone only.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim services.conf

apply Service "disk" {
  check_command = "disk"

  // Execute the check on the remote command endpoint
  command_endpoint = host.vars.agent_endpoint

  assign where host.zone == "satellite" && host.vars.agent_endpoint
}

Validate the configuration and restart Icinga 2 on the master node icinga2-master1.localdomain.

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Open Icinga Web 2 and check the two newly created agent hosts with two new services -- one executed locally (ping4) and one using command endpoint (disk).

Tip:

It's a good idea to add health checks to make sure that your cluster notifies you in case of failure.

In terms of health checks, consider adding the following for this scenario:

Master nodes check whether the satellite zone is connected
Satellite nodes check the connection to the agents
Optional: Add dependencies for the agent host to prevent unwanted notifications when agents are unreachable

Proceed in this chapter.

Best Practice

We've put together a collection of configuration examples from community feedback. If you like to share your tips and tricks with us, please join the community channels!

Global Zone for Config Sync

Global zones can be used to sync generic configuration objects to all nodes depending on them. Common examples are:

Templates which are imported into zone specific objects.
Command objects referenced by Host, Service, Notification objects.
Apply rules for services, notifications and dependencies.
User objects referenced in notifications.
Group objects.
TimePeriod objects.

Plugin scripts and binaries must not be synced, this is for Icinga 2 configuration files only. Use your preferred package repository and/or configuration management tool (Puppet, Ansible, Chef, etc.) for keeping packages and scripts uptodate.

Note: Checkable objects (hosts and services) cannot be put into a global zone. The configuration validation will terminate with an error. Apply rules work as they are evaluated locally on each endpoint.

The zone object configuration must be deployed on all nodes which should receive the global configuration files:

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.conf

object Zone "global-commands" {
  global = true
}

The default global zones generated by the setup wizards are called global-templates and director-global.

While you can and should use global-templates for your global configuration, director-global is reserved for use by Icinga Director. Please don't place any configuration in it manually.

Similar to the zone configuration sync you'll need to create a new directory in /etc/icinga2/zones.d:

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/global-commands

Next, add a new check command, for example:

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/global-commands/web.conf

object CheckCommand "webinject" {
  //...
}

Restart the endpoints(s) which should receive the global zone before before restarting the parent master/satellite nodes.

Then validate the configuration on the master node and restart Icinga 2.

Tip: You can copy the example configuration files located in /etc/icinga2/conf.d into the default global zone global-templates.

Example:

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/conf.d
[root@icinga2-master1.localdomain /etc/icinga2/conf.d]# cp {commands,groups,notifications,services,templates,timeperiods,users}.conf /etc/icinga2/zones.d/global-templates

Health Checks

In case of network failures or other problems, your monitoring might either have late check results or just send out mass alarms for unknown checks.

In order to minimize the problems caused by this, you should configure additional health checks.

cluster-zone with Masters and Agents

The cluster-zone check will test whether the configured target zone is currently connected or not. This example adds a health check for the ha master with agents scenario.

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/services.conf

apply Service "agent-health" {
  check_command = "cluster-zone"

  display_name = "cluster-health-" + host.name

  /* This follows the convention that the agent zone name is the FQDN which is the same as the host object name. */
  vars.cluster_zone = host.name

  assign where host.vars.agent_endpoint
}

In order to prevent unwanted notifications, add a service dependency which gets applied to all services using the command endpoint mode.

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/dependencies.conf

apply Dependency "agent-health-check" to Service {
  parent_service_name = "agent-health"

  states = [ OK ] // Fail if the parent service state switches to NOT-OK
  disable_notifications = true

  assign where host.vars.agent_endpoint // Automatically assigns all agent endpoint checks as child services on the matched host
  ignore where service.name == "agent-health" // Avoid a self reference from child to parent
}

cluster-zone with Masters, Satellites and Agents

This example adds health checks for the master, satellites and agents scenario.

Whenever the connection between the master and satellite zone breaks, you may encounter late check results in Icinga Web. In order to view this failure and also send notifications, add the following configuration:

First, add the two masters as host objects to the master zone, if not already existing.

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/hosts.conf

object Host "icinga2-master1.localdomain" {
  check_command = "hostalive"

  address = "192.168.56.101"
}

object Host "icinga2-master2.localdomain" {
  check_command = "hostalive"

  address = "192.168.56.102"
}

Add service health checks against the satellite zone.

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/health.conf

apply Service "satellite-zone-health" {
  check_command = "cluster-zone"
  check_interval = 30s
  retry_interval = 10s

  vars.cluster_zone = "satellite"

  assign where match("icinga2-master*.localdomain", host.name)
}

Don't forget to create notification apply rules for these services.

Next are health checks for agents connected to the satellite zone. Navigate into the satellite directory in zones.d:

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/satellite

You should already have configured agent host objects following the master, satellite, agents scenario. Add a new configuration file where all the health checks are defined.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim health.conf

apply Service "agent-health" {
  check_command = "cluster-zone"

  display_name = "agent-health-" + host.name

  // This follows the convention that the agent zone name is the FQDN which is the same as the host object name.
  vars.cluster_zone = host.name

  // Create this health check for agent hosts in the satellite zone
  assign where host.zone == "satellite" && host.vars.agent_endpoint
}

In order to prevent unwanted notifications, add a service dependency which gets applied to all services using the command endpoint mode.

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/satellite]# vim health.conf

apply Dependency "agent-health-check" to Service {
  parent_service_name = "agent-health"

  states = [ OK ] // Fail if the parent service state switches to NOT-OK
  disable_notifications = true

  assign where host.zone == "satellite" && host.vars.agent_endpoint // Automatically assigns all agent endpoint checks as child services on the matched host
  ignore where service.name == "agent-health" // Avoid a self reference from child to parent
}

This is all done on the configuration master, and requires the scenario to be fully up and running.

Cluster Check

The cluster check will check if all endpoints in the current zone and the directly connected zones are working properly. The disadvantage of using this check is that you cannot monitor 3 or more cluster levels with it.

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/icinga2-master1.localdomain.conf

object Host "icinga2-master1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.101"
}

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/cluster.conf

object Service "cluster" {
  check_command = "cluster"
  check_interval = 5s
  retry_interval = 1s

  host_name = "icinga2-master1.localdomain"
}

Pin Checks in a Zone

In case you want to pin specific checks to their endpoints in a given zone you'll need to use the command_endpoint attribute. This is reasonable if you want to execute a local disk check in the master Zone on a specific endpoint then.

[root@icinga2-master1.localdomain /]# mkdir -p /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/icinga2-master1.localdomain.conf

object Host "icinga2-master1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.101"
}

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.d/master/services.conf

apply Service "disk" {
  check_command = "disk"

  command_endpoint = host.name //requires a host object matching the endpoint object name e.g. icinga2-master1.localdomain

  assign where host.zone == "master" && match("icinga2-master*", host.name)
}

The host.zone attribute check inside the expression ensures that the service object is only created for host objects inside the master zone. In addition to that the match function ensures to only create services for the master nodes.

Windows Firewall

ICMP Requests

By default ICMP requests are disabled in the Windows firewall. You can change that by adding a new rule.

C:\> netsh advfirewall firewall add rule name="ICMP Allow incoming V4 echo request" protocol=icmpv4:8,any dir=in action=allow

Icinga 2

If your master/satellite nodes should actively connect to the Windows agent you'll also need to ensure that port 5665 is enabled.

C:\> netsh advfirewall firewall add rule name="Open port 5665 (Icinga 2)" dir=in action=allow protocol=TCP localport=5665

NSClient++ API

If the check_nscp_api plugin is used to query NSClient++, you need to ensure that its port is enabled.

C:\> netsh advfirewall firewall add rule name="Open port 8443 (NSClient++ API)" dir=in action=allow protocol=TCP localport=8443

For security reasons, it is advised to enable the NSClient++ HTTP API for local connection from the Icinga agent only. Remote connections to the HTTP API are not recommended with using the legacy HTTP API.

Windows Agent and Plugins

The Icinga 2 package on Windows already provides several plugins. Detailed documentation is available for all check command definitions.

Based on the master with agents scenario we'll now add a local disk check.

First, add the agent node as host object:

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim hosts.conf

object Host "icinga2-agent2.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.112"
  vars.agent_endpoint = name //follows the convention that host name == endpoint name
  vars.os_type = "windows"
}

Next, add the disk check using command endpoint checks (details in the disk-windows documentation):

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim services.conf

apply Service "disk C:" {
  check_command = "disk-windows"

  vars.disk_win_path = "C:"

  //specify where the check is executed
  command_endpoint = host.vars.agent_endpoint

  assign where host.vars.os_type == "windows" && host.vars.agent_endpoint
}

Validate the configuration and restart Icinga 2.

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Open Icinga Web 2 and check your newly added Windows disk check :)

If you want to add your own plugins please check this chapter for the requirements.

Windows Agent and NSClient++

There are two methods available for querying NSClient++:

Query the HTTP API locally from an Icinga agent (requires a running NSClient++ service)
Run a local CLI check (does not require NSClient++ as a service)

Both methods have their advantages and disadvantages. One thing to note: If you rely on performance counter delta calculations such as CPU utilization, please use the HTTP API instead of the CLI sample call.

NSCLient++ with check_nscp_api

The Windows setup already allows you to install the NSClient++ package. In addition to the Windows plugins you can use the nscp_api command provided by the Icinga Template Library (ITL).

The initial setup for the NSClient++ API and the required arguments is the described in the ITL chapter for the nscp_api CheckCommand.

Based on the master with agents scenario we'll now add a local nscp check which queries the NSClient++ API to check the free disk space.

Define a host object called icinga2-agent2.localdomain on the master. Add the nscp_api_password custom variable and specify the drives to check.

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim hosts.conf

object Host "icinga2-agent1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.111"

  vars.agent_endpoint = name //follows the convention that host name == endpoint name
  vars.os_type = "Windows"
  vars.nscp_api_password = "icinga"
  vars.drives = [ "C:", "D:" ]
}

The service checks are generated using an apply for rule based on host.vars.drives:

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim services.conf

apply Service "nscp-api-" for (drive in host.vars.drives) {
  import "generic-service"

  check_command = "nscp_api"
  command_endpoint = host.vars.agent_endpoint

  //display_name = "nscp-drive-" + drive

  vars.nscp_api_host = "localhost"
  vars.nscp_api_query = "check_drivesize"
  vars.nscp_api_password = host.vars.nscp_api_password
  vars.nscp_api_arguments = [ "drive=" +  drive ]

  ignore where host.vars.os_type != "Windows"
}

Validate the configuration and restart Icinga 2.

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Two new services ("nscp-drive-D:" and "nscp-drive-C:") will be visible in Icinga Web 2.

Note: You can also omit the command_endpoint configuration to execute the command on the master. This also requires a different value for nscp_api_host which defaults to host.address.

  //command_endpoint = host.vars.agent_endpoint

  //vars.nscp_api_host = "localhost"

You can verify the check execution by looking at the Check Source attribute in Icinga Web 2 or the REST API.

If you want to monitor specific Windows services, you could use the following example:

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim hosts.conf

object Host "icinga2-agent1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.111"

  vars.agent_endpoint = name //follows the convention that host name == endpoint name
  vars.os_type = "Windows"
  vars.nscp_api_password = "icinga"
  vars.services = [ "Windows Update", "wscsvc" ]
}

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim services.conf

apply Service "nscp-api-" for (svc in host.vars.services) {
  import "generic-service"

  check_command = "nscp_api"
  command_endpoint = host.vars.agent_endpoint

  //display_name = "nscp-service-" + svc

  vars.nscp_api_host = "localhost"
  vars.nscp_api_query = "check_service"
  vars.nscp_api_password = host.vars.nscp_api_password
  vars.nscp_api_arguments = [ "service=" + svc ]

  ignore where host.vars.os_type != "Windows"
}

NSCLient++ with nscp-local

The Windows setup allows you to install the bundled NSClient++ package. In addition to the Windows plugins you can use the nscp-local commands provided by the Icinga Template Library (ITL).

Add the following include statement on all your nodes (master, satellite, agent):

vim /etc/icinga2/icinga2.conf

include <nscp>

The CheckCommand definitions will automatically determine the installed path to the nscp.exe binary.

Based on the master with agents scenario we'll now add a local nscp check querying a given performance counter.

First, add the agent node as host object:

[root@icinga2-master1.localdomain /]# cd /etc/icinga2/zones.d/master
[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim hosts.conf

object Host "icinga2-agent1.localdomain" {
  check_command = "hostalive"
  address = "192.168.56.111"

  vars.agent_endpoint = name //follows the convention that host name == endpoint name
  vars.os_type = "windows"
}

Next, add a performance counter check using command endpoint checks (details in the nscp-local-counter documentation):

[root@icinga2-master1.localdomain /etc/icinga2/zones.d/master]# vim services.conf

apply Service "nscp-local-counter-cpu" {
  check_command = "nscp-local-counter"
  command_endpoint = host.vars.agent_endpoint

  vars.nscp_counter_name = "\\Processor(_total)\\% Processor Time"
  vars.nscp_counter_perfsyntax = "Total Processor Time"
  vars.nscp_counter_warning = 1
  vars.nscp_counter_critical = 5

  vars.nscp_counter_showall = true

  assign where host.vars.os_type == "windows" && host.vars.agent_endpoint
}

Validate the configuration and restart Icinga 2.

[root@icinga2-master1.localdomain /]# icinga2 daemon -C
[root@icinga2-master1.localdomain /]# systemctl restart icinga2

Open Icinga Web 2 and check your newly added Windows NSClient++ check :)

Tip

In order to measure CPU load, you'll need a running NSClient++ service. Therefore it is advised to use a local nscp-api check against its REST API.

Advanced Hints

You can find additional hints in this section if you prefer to go your own route with automating setups (setup, certificates, configuration).

Certificate Auto-Renewal

Icinga 2 v2.8+ added the possibility that nodes request certificate updates on their own. If their expiration date is soon enough, they automatically renew their already signed certificate by sending a signing request to the parent node. You'll also see a message in the logs if certificate renewal isn't necessary.

High-Availability for Icinga 2 Features

All nodes in the same zone require that you enable the same features for high-availability (HA).

By default, the following features provide advanced HA functionality:

Checks (load balanced, automated failover).
Notifications (load balanced, automated failover).
DB IDO (Run-Once, automated failover).
Elasticsearch
Gelf
Graphite
InfluxDB
OpenTsdb
Perfdata (for PNP)

High-Availability with Checks

All instances within the same zone (e.g. the master zone as HA cluster) must have the checker feature enabled.

Example:

icinga2 feature enable checker

All nodes in the same zone load-balance the check execution. If one instance shuts down, the other nodes will automatically take over the remaining checks.

High-Availability with Notifications

All instances within the same zone (e.g. the master zone as HA cluster) must have the notification feature enabled.

Example:

icinga2 feature enable notification

Notifications are load-balanced amongst all nodes in a zone. By default this functionality is enabled. If your nodes should send out notifications independently from any other nodes (this will cause duplicated notifications if not properly handled!), you can set enable_ha = false in the NotificationComponent feature.

High-Availability with DB IDO

All instances within the same zone (e.g. the master zone as HA cluster) must have the DB IDO feature enabled.

Example DB IDO MySQL:

icinga2 feature enable ido-mysql

By default the DB IDO feature only runs on one node. All other nodes in the same zone disable the active IDO database connection at runtime. The node with the active DB IDO connection is not necessarily the zone master.

Note: The DB IDO HA feature can be disabled by setting the enable_ha attribute to false for the IdoMysqlConnection or IdoPgsqlConnection object on all nodes in the same zone.

All endpoints will enable the DB IDO feature and connect to the configured database and dump configuration, status and historical data on their own.

If the instance with the active DB IDO connection dies, the HA functionality will automatically elect a new DB IDO master.

The DB IDO feature will try to determine which cluster endpoint is currently writing to the database and bail out if another endpoint is active. You can manually verify that by running the following query command:

icinga=> SELECT status_update_time, endpoint_name FROM icinga_programstatus;
   status_update_time   | endpoint_name
------------------------+---------------
 2016-08-15 15:52:26+02 | icinga2-master1.localdomain
(1 Zeile)

This is useful when the cluster connection between endpoints breaks, and prevents data duplication in split-brain-scenarios. The failover timeout can be set for the failover_timeout attribute, but not lower than 60 seconds.

Endpoint Connection Direction

Endpoints attempt to connect to another endpoint when its local Endpoint object configuration specifies a valid host attribute (FQDN or IP address).

Example for the master node icinga2-master1.localdomain actively connecting to the agent node icinga2-agent1.localdomain:

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.conf

//...

object Endpoint "icinga2-agent1.localdomain" {
  host = "192.168.56.111" // The master actively tries to connect to the agent
  log_duration = 0 // Disable the replay log for command endpoint agents
}

Example for the agent node icinga2-agent1.localdomain not actively connecting to the master node icinga2-master1.localdomain:

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/zones.conf

//...

object Endpoint "icinga2-master1.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
  log_duration = 0 // Disable the replay log for command endpoint agents
}

It is not necessary that both the master and the agent node establish two connections to each other. Icinga 2 will only use one connection and close the second connection if established. This generates useless CPU cycles and leads to blocking resources when the connection times out.

Tip: Choose either to let master/satellite nodes connect to agent nodes or vice versa.

Disable Log Duration for Command Endpoints

The replay log is a built-in mechanism to ensure that nodes in a distributed setup keep the same history (check results, notifications, etc.) when nodes are temporarily disconnected and then reconnect.

This functionality is not needed when a master/satellite node is sending check execution events to an agent which is configured as command endpoint for check execution.

The Endpoint object attribute log_duration can be lower or set to 0 to fully disable any log replay updates when the agent is not connected.

Configuration on the master node icinga2-master1.localdomain:

[root@icinga2-master1.localdomain /]# vim /etc/icinga2/zones.conf

//...

object Endpoint "icinga2-agent1.localdomain" {
  host = "192.168.56.111" // The master actively tries to connect to the agent
  log_duration = 0
}

object Endpoint "icinga2-agent2.localdomain" {
  host = "192.168.56.112" // The master actively tries to connect to the agent
  log_duration = 0
}

Configuration on the agent icinga2-agent1.localdomain:

[root@icinga2-agent1.localdomain /]# vim /etc/icinga2/zones.conf

//...

object Endpoint "icinga2-master1.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
  log_duration = 0
}

object Endpoint "icinga2-master2.localdomain" {
  // Do not actively connect to the master by leaving out the 'host' attribute
  log_duration = 0
}

Initial Sync for new Endpoints in a Zone

Note

This is required if you decide to change an already running single endpoint production environment into a HA-enabled cluster zone with two endpoints. The initial setup with 2 HA masters doesn't require this step.

In order to make sure that all of your zone endpoints have the same state you need to pick the authoritative running one and copy the following content:

State file from /var/lib/icinga2/icinga2.state
Internal config package for runtime created objects (downtimes, comments, hosts, etc.) at /var/lib/icinga2/api/packages/_api

If you need already deployed config packages from the Director, or synced cluster zones, you can also sync the entire /var/lib/icinga2/api/packages directory. This directory should also be included in your backup strategy.

Do not sync /var/lib/icinga2/api/zones* manually - this is an internal directory and handled by the Icinga cluster config sync itself.

Note

Ensure that all endpoints are shut down during this procedure. Once you have synced the cached files, proceed with configuring the remaining endpoints to let them know about the new master/satellite node (zones.conf).

Manual Certificate Creation

Create CA on the Master

Choose the host which should store the certificate authority (one of the master nodes).

The first step is the creation of the certificate authority (CA) by running the following command as root user:

[root@icinga2-master1.localdomain /root]# icinga2 pki new-ca

Create CSR and Certificate

Create a certificate signing request (CSR) for the local instance:

[root@icinga2-master1.localdomain /root]# icinga2 pki new-cert --cn icinga2-master1.localdomain \
  --key icinga2-master1.localdomain.key \
  --csr icinga2-master1.localdomain.csr

Sign the CSR with the previously created CA:

[root@icinga2-master1.localdomain /root]# icinga2 pki sign-csr --csr icinga2-master1.localdomain.csr --cert icinga2-master1.localdomain

Repeat the steps for all instances in your setup.

Copy Certificates

Copy the host's certificate files and the public CA certificate to /var/lib/icinga2/certs:

[root@icinga2-master1.localdomain /root]# mkdir -p /var/lib/icinga2/certs
[root@icinga2-master1.localdomain /root]# cp icinga2-master1.localdomain.{crt,key} /var/lib/icinga2/certs
[root@icinga2-master1.localdomain /root]# cp /var/lib/icinga2/ca/ca.crt /var/lib/icinga2/certs

Ensure that proper permissions are set (replace icinga with the Icinga 2 daemon user):

[root@icinga2-master1.localdomain /root]# chown -R icinga:icinga /var/lib/icinga2/certs
[root@icinga2-master1.localdomain /root]# chmod 600 /var/lib/icinga2/certs/*.key
[root@icinga2-master1.localdomain /root]# chmod 644 /var/lib/icinga2/certs/*.crt

The CA public and private key are stored in the /var/lib/icinga2/ca directory. Keep this path secure and include it in your backups.

Create Multiple Certificates

Use your preferred method to automate the certificate generation process.

[root@icinga2-master1.localdomain /var/lib/icinga2/certs]# for node in icinga2-master1.localdomain icinga2-master2.localdomain icinga2-satellite1.localdomain; do icinga2 pki new-cert --cn $node --csr $node.csr --key $node.key; done
information/base: Writing private key to 'icinga2-master1.localdomain.key'.
information/base: Writing certificate signing request to 'icinga2-master1.localdomain.csr'.
information/base: Writing private key to 'icinga2-master2.localdomain.key'.
information/base: Writing certificate signing request to 'icinga2-master2.localdomain.csr'.
information/base: Writing private key to 'icinga2-satellite1.localdomain.key'.
information/base: Writing certificate signing request to 'icinga2-satellite1.localdomain.csr'.

[root@icinga2-master1.localdomain /var/lib/icinga2/certs]# for node in icinga2-master1.localdomain icinga2-master2.localdomain icinga2-satellite1.localdomain; do sudo icinga2 pki sign-csr --csr $node.csr --cert $node.crt; done
information/pki: Writing certificate to file 'icinga2-master1.localdomain.crt'.
information/pki: Writing certificate to file 'icinga2-master2.localdomain.crt'.
information/pki: Writing certificate to file 'icinga2-satellite1.localdomain.crt'.

Copy and move these certificates to the respective instances e.g. with SSH/SCP.

Automation

These hints should get you started with your own automation tools (Puppet, Ansible, Chef, Salt, etc.) or custom scripts for automated setup.

These are collected best practices from various community channels.

Silent Windows setup
Node Setup CLI command with parameters

If you prefer an alternate method, we still recommend leaving all the Icinga 2 features intact (e.g. icinga2 feature enable api). You should also use well known and documented default configuration file locations (e.g. zones.conf). This will tremendously help when someone is trying to help in the community channels.

Silent Windows Setup

If you want to install the agent silently/unattended, use the /qn modifier. The installation should not trigger a restart, but if you want to be completely sure, you can use the /norestart modifier.

C:> msiexec /i C:\Icinga2-v2.5.0-x86.msi /qn /norestart

Once the setup is completed you can use the node setup cli command too.

Node Setup using CLI Parameters

Instead of using the node wizard CLI command, there is an alternative node setup command available which has some prerequisites.

Note: The CLI command can be used on Linux/Unix and Windows operating systems. The graphical Windows setup wizard actively uses these CLI commands.

Node Setup on the Master Node

In case you want to setup a master node you must add the --master parameter to the node setup CLI command. In addition to that the --cn can optionally be passed (defaults to the FQDN).

Parameter	Description
`--cn`	Optional. Common name (CN). By convention this should be the host's FQDN. Defaults to the FQDN.
`--zone`	Optional. Zone name. Defaults to `master`.
`--listen`	Optional. Address to listen on. Syntax is `host,port`.
`--disable-confd`	Optional. If provided, this disables the `include_recursive "conf.d"` directive and adds the `api-users.conf` file inclusion to `icinga2.conf`. Available since v2.9+. Not set by default for compatibility reasons with Puppet, Ansible, Chef, etc.

Example:

[root@icinga2-master1.localdomain /]# icinga2 node setup --master

In case you want to bind the ApiListener object to a specific host/port you can specify it like this:

--listen 192.68.56.101,5665

In case you don't need anything in conf.d, use the following command line:

[root@icinga2-master1.localdomain /]# icinga2 node setup --master --disable-confd

Node Setup with Agents/Satellites

Preparations

Make sure that the /var/lib/icinga2/certs directory exists and is owned by the icinga user (or the user Icinga 2 is running as).

[root@icinga2-agent1.localdomain /]# mkdir -p /var/lib/icinga2/certs
[root@icinga2-agent1.localdomain /]# chown -R icinga:icinga /var/lib/icinga2/certs

First you'll need to generate a new local self-signed certificate. Pass the following details to the pki new-cert CLI command:

Parameter	Description
`--cn`	Required. Common name (CN). By convention this should be the host's FQDN.
`--key`, `--file`	Required. Client certificate files. These generated files will be put into the specified location. By convention this should be using `/var/lib/icinga2/certs` as directory.

Example:

[root@icinga2-agent1.localdomain /]# icinga2 pki new-cert --cn icinga2-agent1.localdomain \
--key /var/lib/icinga2/certs/icinga2-agent1.localdomain.key \
--cert /var/lib/icinga2/certs/icinga2-agent1.localdomain.crt

Verify Parent Connection

In order to verify the parent connection and avoid man-in-the-middle attacks, fetch the parent instance's certificate and verify that it matches the connection. The trusted-parent.crt file is a temporary file passed to node setup in the next step and does not need to be stored for later usage.

Pass the following details to the pki save-cert CLI command:

Parameter	Description
`--trustedcert`	Required. Store the parent's certificate file. Manually verify that you're trusting it.
`--host`	Required. FQDN or IP address of the parent host.

Request the master certificate from the master host (icinga2-master1.localdomain) and store it as trusted-parent.crt. Review it and continue.

[root@icinga2-agent1.localdomain /]# icinga2 pki save-cert \
--trustedcert /var/lib/icinga2/certs/trusted-parent.crt \
--host icinga2-master1.localdomain

information/cli: Retrieving TLS certificate for 'icinga2-master1.localdomain:5665'.

 Subject:     CN = icinga2-master1.localdomain
 Issuer:      CN = icinga2-master1.localdomain
 Valid From:  Feb  4 08:59:05 2020 GMT
 Valid Until: Jan 31 08:59:05 2035 GMT
 Fingerprint: B4 90 DE 46 81 DD 2E BF EE 9D D5 47 61 43 EF C6 6D 86 A6 CC

***
*** You have to ensure that this certificate actually matches the parent
*** instance's certificate in order to avoid man-in-the-middle attacks.
***

information/pki: Writing certificate to file '/var/lib/icinga2/certs/trusted-parent.crt'.

Node Setup

Continue with the additional node setup step. Specify a local endpoint and zone name (icinga2-agent1.localdomain) and set the master host (icinga2-master1.localdomain) as parent zone configuration. Specify the path to the previously stored trusted parent certificate (trusted-parent.crt).

Pass the following details to the node setup CLI command:

Parameter	Description
`--cn`	Optional. Common name (CN). By convention this should be the host's FQDN.
`--ticket`	Required. Request ticket. Add the previously generated ticket number.
`--trustedcert`	Required. Trusted parent certificate file as connection verification (received via 'pki save-cert').
`--parent_host`	Optional. FQDN or IP address of the parent host. This is where the command connects for CSR signing. If not specified, you need to manually copy the parent's public CA certificate file into `/var/lib/icinga2/certs/ca.crt` in order to start Icinga 2.
`--endpoint`	Required. Specifies the parent's endpoint name.
`--zone`	Required. Specifies the agent/satellite zone name.
`--parent_zone`	Optional. Specifies the parent's zone name.
`--accept-config`	Optional. Whether this node accepts configuration sync from the master node (required for config sync mode).
`--accept-commands`	Optional. Whether this node accepts command execution messages from the master node (required for command endpoint mode).
`--global_zones`	Optional. Allows to specify more global zones in addition to `global-templates` and `director-global`.
`--disable-confd`	Optional. If provided, this disables the `include_recursive "conf.d"` directive in `icinga2.conf`. Available since v2.9+. Not set by default for compatibility reasons with Puppet, Ansible, Chef, etc.

Note

The master_host parameter is deprecated and will be removed. Please use --parent_host instead.

Example:

[root@icinga2-agent1.localdomain /]# icinga2 node setup --ticket ead2d570e18c78abf285d6b85524970a0f69c22d \
--cn icinga2-agent1.localdomain \
--endpoint icinga2-master1.localdomain \
--zone icinga2-agent1.localdomain \
--parent_zone master \
--parent_host icinga2-master1.localdomain \
--trustedcert /var/lib/icinga2/certs/trusted-parent.crt \
--accept-commands --accept-config \
--disable-confd

In case the agent/satellite should connect to the master node, you'll need to modify the --endpoint parameter using the format cn,host,port:

--endpoint icinga2-master1.localdomain,192.168.56.101,5665

Specify the parent zone using the --parent_zone parameter. This is useful if the agent connects to a satellite, not the master instance.

--parent_zone satellite

In case the agent should know the additional global zone linux-templates, you'll need to set the --global-zones parameter.

--global_zones linux-templates

The --parent-host parameter is optional since v2.9 and allows you to perform a connection-less setup. You cannot restart Icinga 2 yet, the CLI command asked to to manually copy the parent's public CA certificate file in /var/lib/icinga2/certs/ca.crt. Once Icinga 2 is started, it sends a ticket signing request to the parent node. If you have provided a ticket, the master node signs the request and sends it back to the agent/satellite which performs a certificate update in-memory.

In case you did not provide a ticket, you need to manually sign the CSR on the master node which holds the CA's key pair.

You can find additional best practices below.

If this agent node is configured as remote command endpoint execution you can safely disable the checker feature. The node setup CLI command already disabled the notification feature.

[root@icinga2-agent1.localdomain /]# icinga2 feature disable checker

Optional: Add an ApiUser object configuration for remote troubleshooting.

[root@icinga2-agent1.localdomain /]# cat <<EOF >/etc/icinga2/conf.d/api-users.conf
object ApiUser "root" {
  password = "agentsupersecretpassword"
  permissions = ["*"]
}
EOF

Finally restart Icinga 2.

[root@icinga2-agent1.localdomain /]# systemctl restart icinga2

Your automation tool must then configure master node in the meantime.

# cat <<EOF >>/etc/icinga2/zones.conf
object Endpoint "icinga2-agent1.localdomain" {
  // Agent connects itself
}

object Zone "icinga2-agent1.localdomain" {
  endpoints = [ "icinga2-agent1.localdomain" ]
  parent = "master"
}

EOF

Using Multiple Environments

Note

This documentation only covers the basics. Full functionality requires a not yet released addon.

In some cases it can be desired to run multiple Icinga instances on the same host. Two potential scenarios include:

Different versions of the same monitoring configuration (e.g. production and testing)
Disparate sets of checks for entirely unrelated monitoring environments (e.g. infrastructure and applications)

The configuration is done with the global constants ApiBindHost and ApiBindPort or the bind_host and bind_port attributes of the ApiListener object.

The environment must be set with the global constant Environment or as object attribute of the IcingaApplication object.

In any case the constant is default value for the attribute and the direct configuration in the objects have more precedence. The constants have been added to allow the values being set from the CLI on startup.

When Icinga establishes a TLS connection to another cluster instance it automatically uses the SNI extension to signal which endpoint it is attempting to connect to. On its own this can already be used to position multiple Icinga instances behind a load balancer.

SNI example: icinga2-agent1.localdomain

However, if the environment is configured to production, Icinga appends the environment name to the SNI hostname like this:

SNI example with environment: icinga2-agent1.localdomain:production

Middleware like loadbalancers or TLS proxies can read the SNI header and route the connection to the appropriate target. I.e., it uses a single externally-visible TCP port (usually 5665) and forwards connections to one or more Icinga instances which are bound to a local TCP port. It does so by inspecting the environment name that is sent as part of the SNI extension.

141 KiB Raw Blame History

Distributed Monitoring with Master, Satellites and Agents

Roles: Master, Satellites and Agents

Zones

Endpoints

ApiListener

Conventions

Security

Versions and Upgrade

Master Setup

Signing Certificates on the Master

CSR Auto-Signing

CSR Auto-Signing: Preparation

CSR Auto-Signing: On the master

On-Demand CSR Signing

On-Demand CSR Signing: Preparation

On-Demand CSR Signing: On the master

Agent/Satellite Setup

Agent/Satellite Setup on Linux

Agent Setup on Windows

Agent Setup on Windows: Installer

Agent Setup on Windows: Configuration Wizard

Bundled NSClient++ Setup

Finish Windows Agent Setup

Configuration Modes

Top Down

Top Down Command Endpoint

Top Down Config Sync

Scenarios

Master with Agents

High-Availability Master with Agents

Three Levels with Masters, Satellites and Agents

Best Practice

Global Zone for Config Sync

Health Checks

cluster-zone with Masters and Agents

cluster-zone with Masters, Satellites and Agents

Cluster Check

Pin Checks in a Zone

Windows Firewall

ICMP Requests

Icinga 2

NSClient++ API

Windows Agent and Plugins

Windows Agent and NSClient++

NSCLient++ with check_nscp_api

NSCLient++ with nscp-local

Advanced Hints

Certificate Auto-Renewal

High-Availability for Icinga 2 Features

High-Availability with Checks

High-Availability with Notifications

High-Availability with DB IDO

Endpoint Connection Direction

Disable Log Duration for Command Endpoints

Initial Sync for new Endpoints in a Zone

Manual Certificate Creation

Create CA on the Master

Create CSR and Certificate

Copy Certificates

Create Multiple Certificates

Automation

Silent Windows Setup

Node Setup using CLI Parameters

Node Setup on the Master Node

Node Setup with Agents/Satellites

Preparations

Verify Parent Connection

Node Setup

Using Multiple Environments

141 KiB

Raw Blame History