52 KiB

Raw Blame History

Monitoring Remote Systems

There are multiple ways you can monitor remote clients. Be it using agent-less or agent-based using additional addons & tools.

Icinga 2 uses its own unique and secure communitication protol amongst instances. Be it an High-Availability cluster setup, distributed load-balanced setup or just a single agent monitoring a remote client.

All communication is secured by SSL x509, and fully supports IPv4 and IPv6.

If you are planning to use the native Icinga 2 cluster feature for distributed monitoring and high-availability, please continue reading in this chapter.

Tip

Don't panic - there are CLI commands available, including setup wizards for easy installation with SSL certificates. If you prefer to use your own CA (for example Puppet) you can do that as well.

Agent-less Checks

If the remote service is available using a network protocol and port, and a check plugin is available, you don't necessarily need a local client installed. Rather choose a plugin and configure all parameters and thresholds. The Icinga 2 Template Library already ships various examples like

ping4, ping6, fping4, fping6, hostalive
tcp, udp, ssl
http, ftp
smtp, ssmtp, imap, simap, pop, spop
ntp_time
ssh
dns, dig, dhcp

There are numerous check plugins contributed by community members available on the internet. If you found one for your requirements, integrate them into Icinga 2.

Start your search at

Monitoring Icinga 2 Remote Clients

First, you should decide which role the remote client has:

a single host with local checks
a remote satellite checking other hosts (for example in your DMZ)

Note

If you are planning to build an Icinga 2 distributed setup using the cluster feature, please skip the following instructions and jump directly to the cluster setup instructions.

Note

Remote instances are independent Icinga 2 instances which schedule their checks and just synchronize them back to the defined master zone.

Master Setup for Remote Monitoring

If you are planning to use the remote Icinga 2 clients you'll first need to update your master setup.

Your master setup requires the following

SSL CA and signed certificate for the master
Enabled API feature, and a local Endpoint and Zone object configuration
Firewall ACLs for the communication port (default 5665)

You can use the cli command icinga2 node wizard for setting up a new node on the master. The command must be run as root, all Icinga 2 specific files will be updated to the icinga user the daemon is running as (certificate files for example).

Make sure to answer the first question with n (no).

# icinga2 node wizard

Welcome to the Icinga 2 Setup Wizard!

We'll guide you through all required configuration details.

If you have questions, please consult the documentation at http://docs.icinga.org
or join the community support channels at https://support.icinga.org


Please specify if this is a satellite setup ('n' installs a master setup) [Y/n]: n
Starting the Master setup routine...
Please specifiy the common name (CN) [icinga2m]:
information/base: Writing private key to '/var/lib/icinga2/ca/ca.key'.
information/base: Writing X509 certificate to '/var/lib/icinga2/ca/ca.crt'.
information/cli: Initializing serial file in '/var/lib/icinga2/ca/serial.txt'.
information/cli: Generating new CSR in '/etc/icinga2/pki/icinga2m.csr'.
information/base: Writing private key to '/etc/icinga2/pki/icinga2m.key'.
information/base: Writing certificate signing request to '/etc/icinga2/pki/icinga2m.csr'.
information/cli: Signing CSR with CA and writing certificate to '/etc/icinga2/pki/icinga2m.crt'.
information/cli: Copying CA certificate to '/etc/icinga2/pki/ca.crt'.
information/cli: Dumping config items to file '/etc/icinga2/zones.conf'.
Please specify the API bind host/port (optional):
Bind Host []:
Bind Port []:
information/cli: Enabling the APIlistener feature.
information/cli: Updating constants.conf.
information/cli: Updating constants file '/etc/icinga2/constants.conf'.
information/cli: Updating constants file '/etc/icinga2/constants.conf'.
information/cli: Edit the constants.conf file '/etc/icinga2/constants.conf' and set a secure 'TicketSalt' constant.
Done.

Now restart your Icinga 2 daemon to finish the installation!

If you encounter problems or bugs, please do not hesitate to
get in touch with the community at https://support.icinga.org

The setup wizard will do the following:

Generate a local CA in /var/lib/icinga2/ca or use the existing one
Generate a new CSR, sign it with the local CA and copying it into /etc/icinga2/pki
Generate a local zone and endpoint configuration for this master based on FQDN
Enabling the API feature, and setting optional bind_host and bind_port
Setting the NodeName and TicketSalt constants in constants.conf

The setup wizard does not automatically restart Icinga 2.

Note

This setup wizard will install a standalone master, HA cluster scenarios are currently not supported.

Client Setup for Remote Monitoring

Icinga 2 can be installed on Linux/Unix and Windows. While Linux/Unix will be using the CLI command node wizard for a guided setup, you will need to use the graphical installer for Windows based client setup.

Your client setup requires the following

SSL signed certificate for communication with the master (Use CSR auto-signing).
Enabled API feature, and a local Endpoint and Zone object configuration
Firewall ACLs for the communication port (default 5665)

Linux Client Setup for Remote Monitoring

Requirements for CSR Auto-Signing

If your remote clients are capable of connecting to the central master, Icinga 2 supports CSR auto-signing.

First you'll need to define a secure ticket salt in the constants.conf. The setup wizard for the master setup will create one for you already.

# grep TicketSalt /etc/icinga2/constants.conf

The client setup wizard will ask you to generate a valid ticket number using its CN. If you already know your remote client's Common Names (CNs) - usually the FQDN - you can generate all ticket numbers on-demand.

This is also reasonable if you are not capable of installing the remote client, but a colleague of yours, or a customer.

Example for a client notebook:

# icinga2 pki ticket --cn nbmif.int.netways.de

Note

You can omit the --salt parameter using the TicketSalt constant from constants.conf if already defined and Icinga 2 was reloaded after the master setup.

Manual SSL Certificate Generation

This is described separately in the cluster setup chapter.

Note

If you're using CSR Auto-Signing, skip this step.

Linux Client Setup Wizard for Remote Monitoring

Install Icinga 2 from your distribution's package repository as described in the general installation instructions.

Please make sure that either CSR Auto-Signing requirements are fulfilled, or that you're using manual SSL certificate generation.

Note

You don't need any features (DB IDO, Livestatus) or user interfaces on the remote client. Install them only if you're planning to use them.

Once the package installation succeeded, use the node wizard cli command to install a new Icinga 2 node as client setup.

You'll need the following configuration details:

The client common name (CN). Defaults to FQDN.
The client's local zone name. Defaults to FQDN.
The master endpoint name. Look into your master setup zones.conf file for the proper name.
The master endpoint connection information. Your master's IP address and port (defaults to 5665)
The request ticket number generated on your master for CSR Auto-Signing
Bind host/port for the Api feature (optional)

The command must be run as root, all Icinga 2 specific files will be updated to the icinga user the daemon is running as (certificate files for example).

Make sure to answer the first question with n (no).

# icinga2 node wizard

Welcome to the Icinga 2 Setup Wizard!

We'll guide you through all required configuration details.

If you have questions, please consult the documentation at http://docs.icinga.org
or join the community support channels at https://support.icinga.org


Please specify if this is a satellite setup ('n' installs a master setup) [Y/n]:
Starting the Node setup routine...
Please specifiy the common name (CN) [nbmif.int.netways.de]:
Please specifiy the local zone name [nbmif.int.netways.de]:
Please specify the master endpoint(s) this node should connect to:
Master Common Name (CN from your master setup, defaults to FQDN): icinga2m
Please fill out the master connection information:
Master endpoint host (required, your master's IP address or FQDN): 192.168.33.100
Master endpoint port (optional) []:
Add more master endpoints? [y/N]
Please specify the master connection for CSR auto-signing (defaults to master endpoint host):
Host [192.168.33.100]:
Port [5665]:
information/base: Writing private key to '/var/lib/icinga2/ca/ca.key'.
information/base: Writing X509 certificate to '/var/lib/icinga2/ca/ca.crt'.
information/cli: Initializing serial file in '/var/lib/icinga2/ca/serial.txt'.
information/base: Writing private key to '/etc/icinga2/pki/nbmif.int.netways.de.key'.
information/base: Writing X509 certificate to '/etc/icinga2/pki/nbmif.int.netways.de.crt'.
information/cli: Generating self-signed certifiate:
information/cli: Fetching public certificate from master (192.168.33.100, 5665):

information/cli: Writing trusted certificate to file '/etc/icinga2/pki/trusted-master.crt'.
information/cli: Stored trusted master certificate in '/etc/icinga2/pki/trusted-master.crt'.

Please specify the request ticket generated on your Icinga 2 master.
 (Hint: '# icinga2 pki ticket --cn nbmif.int.netways.de'):
2e070405fe28f311a455b53a61614afd718596a1
information/cli: Processing self-signed certificate request. Ticket '2e070405fe28f311a455b53a61614afd718596a1'.

information/cli: Writing signed certificate to file '/etc/icinga2/pki/nbmif.int.netways.de.crt'.
information/cli: Writing CA certificate to file '/var/lib/icinga2/ca/ca.crt'.
Please specify the API bind host/port (optional):
Bind Host []:
Bind Port []:
information/cli: Disabling the Notification feature.
Disabling feature notification. Make sure to restart Icinga 2 for these changes to take effect.
information/cli: Enabling the Apilistener feature.
information/cli: Generating local zones.conf.
information/cli: Dumping config items to file '/etc/icinga2/zones.conf'.
information/cli: Updating constants.conf.
information/cli: Updating constants file '/etc/icinga2/constants.conf'.
Done.

Now restart your Icinga 2 daemon to finish the installation!

If you encounter problems or bugs, please do not hesitate to
get in touch with the community at https://support.icinga.org

The setup wizard will do the following:

Generate a local CA in /var/lib/icinga2/ca or use the existing one
Generate a new CSR, sign it with the local CA and copying it into /etc/icinga2/pki
Store the master's certificate as trusted certificate for requesting a new signed certificate (manual step when using node setup).
Request a new signed certificate from the master and store updated certificate and master CA in /etc/icinga2/pki
Generate a local zone and endpoint configuration for this client and the provided master information (based on FQDN)
Disabling the notification feature for this client
Enabling the API feature, and setting optional bind_host and bind_port
Setting the NodeName constant in constants.conf

The setup wizard does not automatically restart Icinga 2.

Windows Client Setup for Remote Monitoring

Download the MSI-Installer package from http://packages.icinga.org/windows/.

Requirements:

Microsoft .NET Framework 2.0 if not already installed.

The setup wizard will install Icinga 2 and then continue with SSL certificate generation, CSR-Autosigning and configuration setup.

You'll need the following configuration details:

The client common name (CN). Defaults to FQDN.
The client's local zone name. Defaults to FQDN.
The master endpoint name. Look into your master setup zones.conf file for the proper name.
The master endpoint connection information. Your master's IP address and port (defaults to 5665)
The request ticket number generated on your master for CSR Auto-Signing
Bind host/port for the Api feature (optional)

Once install is done, Icinga 2 is automatically started as a Windows service.

Client Configuration for Remote Monitoring

There is no difference in the configuration syntax on clients to any other Icinga 2 installation.

The following convention applies to remote clients:

The hostname in the default host object should be the same as the Common Name (CN) used for SSL setup
Add new services and check commands locally

The default setup routine will install a new host based on your FQDN in repository.d/hosts with all services in separate configuration files a directory underneath.

The repository can be managed using the cli command repository.

Note

The cli command repository only supports basic configuration manipulation (add, remove). Future versions will support more options (set, etc.). Please check the Icinga 2 development roadmap for that.

You can also use additional features like notifications directly on the remote client, if you are required to. Basically everything a single Icinga 2 instance provides by default.

Discover Client Services on the Master

Icinga 2 clients will sync their locally defined objects to the defined master node. That way you can list, add, filter and remove nodes based on their node, zone, host or service name.

List all discovered nodes (satellites, agents) and their hosts/services:

# icinga2 node list

Manually Discover Clients on the Master

Add a to-be-discovered client to the master:

# icinga2 node add my-remote-client

Set the connection details, and the Icinga 2 master will attempt to connect to this node and sync its object repository.

# icinga2 node set my-remote-client --host 192.168.33.101 --port 5665

You can control that by calling the node list command:

# icinga2 node list
Node 'my-remote-client' (host: 192.168.33.101, port: 5665, log duration: 1 day, last seen: Sun Nov  2 17:46:29 2014)

Remove Discovered Clients

If you don't require a connected agent, you can manually remove it and its discovered hosts and services using the following cli command:

# icinga2 node remove my-discovered-agent

Note

Better use blacklists and/or whitelists to control which clients and hosts/services are integrated into your master configuration repository.

Generate Icinga 2 Configuration for Client Services on the Master

There is a dedicated Icinga 2 CLI command for updating the client services on the master, generating all required configuration.

# icinga2 node update-config

The generated configuration of all nodes is stored in the repository.d/ directory.

Note

If there are existing hosts/services defined or modified, the cli command will not overwrite these (modified) configuration files.

If hosts or services disappeared from the client discovery, it will remove the existing configuration objects from the config repository.

The update-config cli command will fail, if there are uncommitted changes for the configuration repository. Please review these changes manually, or clear the commit and try again. This is a safety hook to prevent unwanted manual changes to be committed by a updating the client discovered objects only.

# icinga2 repository commit --simulate

# icinga2 repository clear-changes

# icinga2 repository commit

After updating the configuration repository, make sure to reload Icinga 2.

# service icinga2 reload

Using Systemd: # systemctl reload icinga2.service

Blacklist/Whitelist for Clients on the Master

It's sometimes necessary to blacklist an entire remote client, or specific hosts or services provided by this client. While it's reasonable for the local admin to configure for example an additional ping check, you're not interested in that on the master sending out notifications and presenting the dashboard to your support team.

Blacklisting an entire set might not be sufficient for excluding several objects, be it a specific remote client with one ping servie you're interested in. Therefore you can whitelist clients, hosts, services in a similar manner

Example for blacklisting all ping* services, but allowing only probe host with ping4:

# icinga2 node blacklist add --zone "*" --host "*" --service "ping*"
# icinga2 node whitelist add --zone "*" --host "probe" --service "ping*"

You can list and remove existing blacklists:

# icinga2 node blacklist list
Listing all blacklist entries:
blacklist filter for Node: '*' Host: '*' Service: 'ping*'.

# icinga2 node whitelist list
Listing all whitelist entries:
whitelist filter for Node: '*' Host: 'probe' Service: 'ping*'.

Note

The --zone and --host arguments are required. A zone is always where the remote client is in. If you are unsure about it, set a wildcard (*) for them and filter only by host/services.

Agent-based Checks using additional Software

If the remote services are not directly accessible through the network, a local agent installation exposing the results to check queries can become handy.

SNMP

The SNMP daemon runs on the remote system and answers SNMP queries by plugin binaries. The Monitoring Plugins package ships the check_snmp plugin binary, but there are plenty of existing plugins for specific use cases already around, for example monitoring Cisco routers.

The following example uses the SNMP ITL CheckCommand and just overrides the snmp_oid custom attribute. A service is created for all hosts which have the snmp-community custom attribute.

apply Service "uptime" {
  import "generic-service"

  check_command = "snmp"
  vars.snmp_oid = "1.3.6.1.2.1.1.3.0"

  assign where host.vars.snmp_community != ""
}

Additional SNMP plugins are available using the Manubulon SNMP Plugins.

SSH

Calling a plugin using the SSH protocol to execute a plugin on the remote server fetching its return code and output. The by_ssh command object is part of the built-in templates and requires the check_by_ssh check plugin which is available in the Monitoring Plugins package.

object CheckCommand "by_ssh_swap" {
  import "by_ssh"

  vars.by_ssh_command = "/usr/lib/nagios/plugins/check_swap -w $by_ssh_swap_warn$ -c $by_ssh_swap_crit$"
  vars.by_ssh_swap_warn = "75%"
  vars.by_ssh_swap_crit = "50%"
}

object Service "swap" {
  import "generic-service"

  host_name = "remote-ssh-host"

  check_command = "by_ssh_swap"

  vars.by_ssh_logname = "icinga"
}

NRPE

NRPE runs as daemon on the remote client including the required plugins and command definitions. Icinga 2 calls the check_nrpe plugin binary in order to query the configured command on the remote client.

The NRPE daemon uses its own configuration format in nrpe.cfg while check_nrpe can be embedded into the Icinga 2 CheckCommand configuration syntax.

You can use the check_nrpe plugin from the NRPE project to query the NRPE daemon. Icinga 2 provides the nrpe check command for this:

Example:

object Service "users" {
  import "generic-service"

  host_name = "remote-nrpe-host"

  check_command = "nrpe"
  vars.nrpe_command = "check_users"
}

nrpe.cfg:

command[check_users]=/usr/local/icinga/libexec/check_users -w 5 -c 10

NSClient++

NSClient++ works on both Windows and Linux platforms and is well known for its magnificent Windows support. There are alternatives like the WMI interface, but using NSClient++ will allow you to run local scripts similar to check plugins fetching the required output and performance counters.

You can use the check_nt plugin from the Monitoring Plugins project to query NSClient++. Icinga 2 provides the nscp check command for this:

Example:

object Service "disk" {
  import "generic-service"

  host_name = "remote-windows-host"

  check_command = "nscp"

  vars.nscp_variable = "USEDDISKSPACE"
  vars.nscp_params = "c"
  vars.nscp_warn = 70
  vars.nscp_crit = 80
}

For details on the NSClient++ configuration please refer to the official documentation.

NSCA-NG

NSCA-ng provides a client-server pair that allows the remote sender to push check results into the Icinga 2 ExternalCommandListener feature.

Note

This addon works in a similar fashion like the Icinga 1.x distributed model. If you are looking for a real distributed architecture with Icinga 2, scroll down.

Passive Check Results and SNMP Traps

SNMP Traps can be received and filtered by using SNMPTT and specific trap handlers passing the check results to Icinga 2.

Note

The host and service object configuration must be available on the Icinga 2 server in order to process passive check results.

Distributed Monitoring and High Availability

Building distributed environments with high availability included is fairly easy with Icinga 2. The cluster feature is built-in and allows you to build many scenarios based on your requirements:

High Availability. All instances in the Zone elect one active master and run as Active/Active cluster.
Distributed Zones. A master zone and one or more satellites in their zones.
Load Distribution. A configuration master and multiple checker satellites.

You can combine these scenarios into a global setup fitting your requirements.

Each instance got their own event scheduler, and does not depend on a centralized master coordinating and distributing the events. In case of a cluster failure, all nodes continue to run independently. Be alarmed when your cluster fails and a Split-Brain-scenario is in effect - all alive instances continue to do their job, and history will begin to differ.

** Note **

Before you start, make sure to read the requirements.

Cluster Requirements

Before you start deploying, keep the following things in mind:

Your SSL CA and certificates are mandatory for secure communication
Get pen and paper or a drawing board and design your nodes and zones!
- all nodes in a cluster zone are providing high availability functionality and trust each other
- cluster zones can be built in a Top-Down-design where the child trusts the parent
- communication between zones happens bi-directional which means that a DMZ-located node can still reach the master node, or vice versa
Update firewall rules and ACLs
Decide whether to use the built-in configuration syncronization or use an external tool (Puppet, Ansible, Chef, Salt, etc) to manage the configuration deployment

Tip

If you're looking for troubleshooting cluster problems, check the general troubleshooting section.

Manual SSL Certificate Generation

Icinga 2 ships cli commands assisting with CA and node certificate creation for your Icinga 2 distributed setup.

Note

You're free to use your own method to generated a valid ca and signed client certificates.

The first step is the creation of the certificate authority (CA) by running the following command:

# icinga2 pki new-ca

Now create a certificate and key file for each node running the following command (replace icinga2a with the required hostname):

# icinga2 pki new-cert --cn icinga2a --key icinga2a.key --csr icinga2a.csr
# icinga2 pki sign-csr --csr icinga2a.csr --cert icinga2a.crt

Repeat the step for all nodes in your cluster scenario.

Save the CA key in a secure location in case you want to set up certificates for additional nodes at a later time.

Navigate to the location of your newly generated certificate files, and manually copy/transfer them to /etc/icinga2/pki in your Icinga 2 configuration folder.

Note

The certificate files must be readable by the user Icinga 2 is running as. Also, the private key file must not be world-readable.

Each node requires the following files in /etc/icinga2/pki (replace fqdn-nodename with the host's FQDN):

ca.crt
<fqdn-nodename>.crt
<fqdn-nodename>.key

Cluster Naming Convention

The SSL certificate common name (CN) will be used by the ApiListener object to determine the local authority. This name must match the local Endpoint object name.

Example:

# icinga2 pki new-cert --cn icinga2a --key icinga2a.key --csr icinga2a.csr
# icinga2 pki sign-csr --csr icinga2a.csr --cert icinga2a.crt

# vim zones.conf

object Endpoint "icinga2a" {
  host = "icinga2a.icinga.org"
}

The Endpoint name is further referenced as endpoints attribute on the Zone object.

object Endpoint "icinga2b" {
  host = "icinga2b.icinga.org"
}

object Zone "config-ha-master" {
  endpoints = [ "icinga2a", "icinga2b" ]
}

Specifying the local node name using the NodeName variable requires the same name as used for the endpoint name and common name above. If not set, the FQDN is used.

const NodeName = "icinga2a"

Cluster Configuration

The following section describe which configuration must be updated/created in order to get your cluster running with basic functionality.

configure the node name
configure the ApiListener object
configure cluster endpoints
configure cluster zones

Once you're finished with the basic setup the following section will describe how to use zone configuration synchronisation and configure cluster scenarios.

Configure the Icinga Node Name

Instead of using the default FQDN as node name you can optionally set that value using the NodeName constant.

** Note **

Skip this step if your FQDN already matches the default NodeName set in /etc/icinga2/constants.conf.

This setting must be unique for each node, and must also match the name of the local Endpoint object and the SSL certificate common name as described in the cluster naming convention.

vim /etc/icinga2/constants.conf

/* Our local instance name. By default this is the server's hostname as returned by `hostname --fqdn`.
 * This should be the common name from the API certificate.
 */
const NodeName = "icinga2a"

Read further about additional naming conventions.

Not specifying the node name will make Icinga 2 using the FQDN. Make sure that all configured endpoint names and common names are in sync.

Configure the ApiListener Object

The ApiListener object needs to be configured on every node in the cluster with the following settings:

A sample config looks like:

object ApiListener "api" {
  cert_path = SysconfDir + "/icinga2/pki/" + NodeName + ".crt"
  key_path = SysconfDir + "/icinga2/pki/" + NodeName + ".key"
  ca_path = SysconfDir + "/icinga2/pki/ca.crt"
  accept_config = true
}

You can simply enable the api feature using

# icinga2 feature enable api

Edit /etc/icinga2/features-enabled/api.conf if you require the configuration synchronisation enabled for this node. Set the accept_config attribute to true.

Note

The certificate files must be readable by the user Icinga 2 is running as. Also, the private key file must not be world-readable.

Configure Cluster Endpoints

Endpoint objects specify the host and port settings for the cluster nodes. This configuration can be the same on all nodes in the cluster only containing connection information.

A sample configuration looks like:

/**
 * Configure config master endpoint
 */

object Endpoint "icinga2a" {
  host = "icinga2a.icinga.org"
}

If this endpoint object is reachable on a different port, you must configure the ApiListener on the local Endpoint object accordingly too.

Configure Cluster Zones

Zone objects specify the endpoints located in a zone. That way your distributed setup can be seen as zones connected together instead of multiple instances in that specific zone.

Zones can be used for high availability, distributed setups and load distribution.

Each Icinga 2 Endpoint must be put into its respective Zone. In this example, you will define the zone config-ha-master where the icinga2a and icinga2b endpoints are located. The check-satellite zone consists of icinga2c only, but more nodes could be added.

The config-ha-master zone acts as High-Availability setup - the Icinga 2 instances elect one active master where all features are running on (for example icinga2a). In case of failure of the icinga2a instance, icinga2b will take over automatically.

object Zone "config-ha-master" {
  endpoints = [ "icinga2a", "icinga2b" ]
}

The check-satellite zone is a separated location and only sends back their checkresults to the defined parent zone config-ha-master.

object Zone "check-satellite" {
  endpoints = [ "icinga2c" ]
  parent = "config-ha-master"
}

Zone Configuration Synchronisation

By default all objects for specific zones should be organized in

/etc/icinga2/zones.d/<zonename>

on the configuration master.

Your child zones and endpoint members must not have their config copied to zones.d. The built-in configuration synchronisation takes care of that if your nodes accept configuration from the parent zone. You can define that in the ApiListener object by configuring the accept_config attribute accordingly.

You should remove the sample config included in conf.d by commenting the recursive_include statement in icinga2.conf:

//include_recursive "conf.d"

Better use a dedicated directory name like cluster or similar, and include that one if your nodes require local configuration not being synced to other nodes. That's useful for local health checks for example.

Note

In a high availability setup only one assigned node can act as configuration master. All other zone member nodes must not have the /etc/icinga2/zones.d directory populated.

These zone packages are then distributed to all nodes in the same zone, and to their respective target zone instances.

Each configured zone must exist with the same directory name. The parent zone syncs the configuration to the child zones, if allowed using the accept_config attribute of the ApiListener object.

Config on node icinga2a:

object Zone "master" {
  endpoints = [ "icinga2a" ]
}

object Zone "checker" {
  endpoints = [ "icinga2b" ]
  parent = "master"
}

/etc/icinga2/zones.d
  master
    health.conf
  checker
    health.conf
    demo.conf

Config on node icinga2b:

object Zone "master" {
  endpoints = [ "icinga2a" ]
}

object Zone "checker" {
  endpoints = [ "icinga2b" ]
  parent = "master"
}

/etc/icinga2/zones.d
  EMPTY_IF_CONFIG_SYNC_ENABLED

If the local configuration is newer than the received update Icinga 2 will skip the synchronisation process.

Note

zones.d must not be included in icinga2.conf. Icinga 2 automatically determines the required include directory. This can be overridden using the global constant ZonesDir.

Global Configuration Zone for Templates

If your zone configuration setup shares the same templates, groups, commands, timeperiods, etc. you would have to duplicate quite a lot of configuration objects making the merged configuration on your configuration master unique.

** Note **

Only put templates, groups, etc into this zone. DO NOT add checkable objects such as hosts or services here. If they are checked by all instances globally, this will lead into duplicated check results and unclear state history. Not easy to troubleshoot too - you've been warned.

That is not necessary by defining a global zone shipping all those templates. By setting global = true you ensure that this zone serving common configuration templates will be synchronized to all involved nodes (only if they accept configuration though).

Config on configuration master:

/etc/icinga2/zones.d
  global-templates/
    templates.conf
    groups.conf
  master
    health.conf
  checker
    health.conf
    demo.conf

In this example, the global zone is called global-templates and must be defined in your zone configuration visible to all nodes.

object Zone "global-templates" {
  global = true
}

Note

If the remote node does not have this zone configured, it will ignore the configuration update, if it accepts synchronized configuration.

If you don't require any global configuration, skip this setting.

Zone Configuration Synchronisation Permissions

Each ApiListener object must have the accept_config attribute set to true to receive configuration from the parent Zone members. Default value is false.

object ApiListener "api" {
  cert_path = SysconfDir + "/icinga2/pki/" + NodeName + ".crt"
  key_path = SysconfDir + "/icinga2/pki/" + NodeName + ".key"
  ca_path = SysconfDir + "/icinga2/pki/ca.crt"
  accept_config = true
}

If accept_config is set to false, this instance won't accept configuration from remote master instances anymore.

** Tip **

Look into the troubleshooting guides for debugging problems with the configuration synchronisation.

Cluster Health Check

The Icinga 2 ITL ships an internal check command checking all configured EndPoints in the cluster setup. The check result will become critical if one or more configured nodes are not connected.

Example:

object Service "cluster" {
    check_command = "cluster"
    check_interval = 5s
    retry_interval = 1s

    host_name = "icinga2a"
}

Each cluster node should execute its own local cluster health check to get an idea about network related connection problems from different points of view.

Additionally you can monitor the connection from the local zone to the remote connected zones.

Example for the checker zone checking the connection to the master zone:

object Service "cluster-zone-master" {
  check_command = "cluster-zone"
  check_interval = 5s
  retry_interval = 1s
  vars.cluster_zone = "master"

  host_name = "icinga2b"
}

Cluster Scenarios

All cluster nodes are full-featured Icinga 2 instances. You only need to enabled the features for their role (for example, a Checker node only requires the checker feature enabled, but not notification or ido-mysql features).

Security in Cluster Scenarios

While there are certain capabilities to ensure the safe communication between all nodes (firewalls, policies, software hardening, etc) the Icinga 2 cluster also provides additional security itself:

SSL certificates are mandatory for cluster communication.
Child zones only receive event updates (check results, commands, etc) for their configured updates.
Zones cannot influence/interfere other zones. Each checked object is assigned to only one zone.
All nodes in a zone trust each other.
Configuration sync is disabled by default.

Features in Cluster Zones

Each cluster zone may use all available features. If you have multiple locations or departments, they may write to their local database, or populate graphite. Even further all commands are distributed amongst connected nodes. For example, you could re-schedule a check or acknowledge a problem on the master, and it gets replicated to the actual slave checker node.

DB IDO on the left, graphite on the right side - works (if you disable DB IDO HA). Icinga Web 2 on the left, checker and notifications on the right side - works too. Everything on the left and on the right side - make sure to deal with load-balanced notifications and checks in a HA zone. configure-cluster-zones

Distributed Zones

That scenario fits if your instances are spread over the globe and they all report to a master instance. Their network connection only works towards the master master (or the master is able to connect, depending on firewall policies) which means remote instances won't see each/connect to each other.

All events (check results, downtimes, comments, etc) are synced to the master node, but the remote nodes can still run local features such as a web interface, reporting, graphing, etc. in their own specified zone.

Imagine the following example with a master node in Nuremberg, and two remote DMZ based instances in Berlin and Vienna. Additonally you'll specify global templates available in all zones.

The configuration tree on the master instance nuremberg could look like this:

zones.d
  global-templates/
    templates.conf
    groups.conf
  nuremberg/
    local.conf
  berlin/
    hosts.conf
  vienna/
    hosts.conf

The configuration deployment will take care of automatically synchronising the child zone configuration:

The master node sends zones.d/berlin to the berlin child zone.
The master node sends zones.d/vienna to the vienna child zone.
The master node sends zones.d/global-templates to the vienna and berlin child zones.

The endpoint configuration would look like:

object Endpoint "nuremberg-master" {
  host = "nuremberg.icinga.org"
}

object Endpoint "berlin-satellite" {
  host = "berlin.icinga.org"
}

object Endpoint "vienna-satellite" {
  host = "vienna.icinga.org"
}

The zones would look like:

object Zone "nuremberg" {
  endpoints = [ "nuremberg-master" ]
}

object Zone "berlin" {
  endpoints = [ "berlin-satellite" ]
  parent = "nuremberg"
}

object Zone "vienna" {
  endpoints = [ "vienna-satellite" ]
  parent = "nuremberg"
}

object Zone "global-templates" {
  global = true
}

The nuremberg-master zone will only execute local checks, and receive check results from the satellite nodes in the zones berlin and vienna.

Note

The child zones berlin and vienna will get their configuration synchronised from the configuration master 'nuremberg'. The endpoints in the child zones must not have their zones.d directory populated if this endpoint accepts synced configuration.

Load Distribution

If you are planning to off-load the checks to a defined set of remote workers you can achieve that by:

Deploying the configuration on all nodes.
Let Icinga 2 distribute the load amongst all available nodes.

That way all remote check instances will receive the same configuration but only execute their part. The master instance located in the master zone can also execute checks, but you may also disable the Checker feature.

Configuration on the master node:

zones.d/
  global-templates/
  master/
  checker/

If you are planning to have some checks executed by a specific set of checker nodes you have to define additional zones and define these check objects there.

Endpoints:

object Endpoint "master-node" {
  host = "master.icinga.org"
}

object Endpoint "checker1-node" {
  host = "checker1.icinga.org"
}

object Endpoint "checker2-node" {
  host = "checker2.icinga.org"
}

Zones:

object Zone "master" {
  endpoints = [ "master-node" ]
}

object Zone "checker" {
  endpoints = [ "checker1-node", "checker2-node" ]
  parent = "master"
}

object Zone "global-templates" {
  global = true
}

Note

The child zones checker will get its configuration synchronised from the configuration master 'master'. The endpoints in the child zone must not have their zones.d directory populated if this endpoint accepts synced configuration.

Cluster High Availability

High availability with Icinga 2 is possible by putting multiple nodes into a dedicated zone. All nodes will elect one active master, and retry an election once the current active master is down.

Selected features provide advanced HA functionality. Checks and notifications are load-balanced between nodes in the high availability zone.

Connections from other zones will be accepted by all active and passive nodes but all are forwarded to the current active master dealing with the check results, commands, etc.

object Zone "config-ha-master" {
  endpoints = [ "icinga2a", "icinga2b", "icinga2c" ]
}

Two or more nodes in a high availability setup require an initial cluster sync.

Note

Keep in mind that only one node acts as configuration master having the configuration files in the zones.d directory. All other nodes must not have that directory populated. Instead they are required to accept synced configuration. Details in the Configuration Sync Chapter.

Multiple Hierachies

Your master zone collects all check results for reporting and graphing and also does some sort of additional notifications. The customers got their own instances in their local DMZ zones. They are limited to read/write only their services, but replicate all events back to the master instance. Within each DMZ there are additional check instances also serving interfaces for local departments. The customers instances will collect all results, but also send them back to your master instance. Additionally the customers instance on the second level in the middle prohibits you from sending commands to the subjacent department nodes. You're only allowed to receive the results, and a subset of each customers configuration too.

Your master zone will generate global reports, aggregate alert notifications, and check additional dependencies (for example, the customers internet uplink and bandwidth usage).

The customers zone instances will only check a subset of local services and delegate the rest to each department. Even though it acts as configuration master with a master dashboard for all departments managing their configuration tree which is then deployed to all department instances. Furthermore the master NOC is able to see what's going on.

The instances in the departments will serve a local interface, and allow the administrators to reschedule checks or acknowledge problems for their services.

High Availability for Icinga 2 features

All nodes in the same zone require the same features enabled for High Availability (HA) amongst them.

By default the following features provide advanced HA functionality:

Checks (load balanced, automated failover)
Notifications (load balanced, automated failover)
DB IDO (Run-Once, automated failover)

High Availability with Checks

All nodes in the same zone load-balance the check execution. When one instance fails the other nodes will automatically take over the reamining checks.

Note

If a node should not check anything, disable the checker feature explicitely and reload Icinga 2.

# icinga2 feature disable checker
# service icinga2 reload

High Availability with Notifications

Notifications are load balanced amongst all nodes in a zone. By default this functionality is enabled. If your nodes should notify independent from any other nodes (this will cause duplicated notifications if not properly handled!), you can set enable_ha = false in the NotificationComponent feature.

High Availability with DB IDO

All instances within the same zone (e.g. the master zone as HA cluster) must have the DB IDO feature enabled.

Example DB IDO MySQL:

# icinga2 feature enable ido-mysql
The feature 'ido-mysql' is already enabled.

By default the DB IDO feature only runs on the elected zone master. All other passive nodes disable the active IDO database connection at runtime.

Note

The DB IDO HA feature can be disabled by setting the enable_ha attribute to false for the IdoMysqlConnection or IdoPgsqlConnection object on all nodes in the same zone.

All endpoints will enable the DB IDO feature then, connect to the configured database and dump configuration, status and historical data on their own.

If the instance with the active DB IDO connection dies, the HA functionality will re-enable the DB IDO connection on the newly elected zone master.

The DB IDO feature will try to determine which cluster endpoint is currently writing to the database and bail out if another endpoint is active. You can manually verify that by running the following query:

icinga=> SELECT status_update_time, endpoint_name FROM icinga_programstatus;
   status_update_time   | endpoint_name
------------------------+---------------
 2014-08-15 15:52:26+02 | icinga2a
(1 Zeile)

This is useful when the cluster connection between endpoints breaks, and prevents data duplication in split-brain-scenarios. The failover timeout can be set for the failover_timeout attribute, but not lower than 60 seconds.

Add a new cluster endpoint

These steps are required for integrating a new cluster endpoint:

generate a new SSL client certificate
identify its location in the zones
update the zones.conf file on each involved node (endpoint, zones)
- a new slave zone node requires updates for the master and slave zones
- verify if this endpoints requires configuration synchronisation enabled
if the node requires the existing zone history: initial cluster sync
add a cluster health check

Initial Cluster Sync

In order to make sure that all of your cluster nodes have the same state you will have to pick one of the nodes as your initial "master" and copy its state file to all the other nodes.

You can find the state file in /var/lib/icinga2/icinga2.state. Before copying the state file you should make sure that all your cluster nodes are properly shut down.

Host With Multiple Cluster Nodes

Special scenarios might require multiple cluster nodes running on a single host. By default Icinga 2 and its features will place their runtime data below the prefix LocalStateDir. By default packages will set that path to /var. You can either set that variable as constant configuration definition in icinga2.conf or pass it as runtime variable to the Icinga 2 daemon.

# icinga2 -c /etc/icinga2/node1/icinga2.conf -DLocalStateDir=/opt/node1/var

52 KiB Raw Blame History

Monitoring Remote Systems

Agent-less Checks

Monitoring Icinga 2 Remote Clients

Master Setup for Remote Monitoring

Client Setup for Remote Monitoring

Linux Client Setup for Remote Monitoring

Requirements for CSR Auto-Signing

Manual SSL Certificate Generation

Linux Client Setup Wizard for Remote Monitoring

Windows Client Setup for Remote Monitoring

Client Configuration for Remote Monitoring

Discover Client Services on the Master

Manually Discover Clients on the Master

Remove Discovered Clients

Generate Icinga 2 Configuration for Client Services on the Master

Blacklist/Whitelist for Clients on the Master

Agent-based Checks using additional Software

SNMP

SSH

NRPE

NSClient++

NSCA-NG

Passive Check Results and SNMP Traps

Distributed Monitoring and High Availability

Cluster Requirements

Manual SSL Certificate Generation

Cluster Naming Convention

Cluster Configuration

Configure the Icinga Node Name

Configure the ApiListener Object

Configure Cluster Endpoints

Configure Cluster Zones

Zone Configuration Synchronisation

Global Configuration Zone for Templates

Zone Configuration Synchronisation Permissions

Cluster Health Check

Cluster Scenarios

Security in Cluster Scenarios

Features in Cluster Zones

Distributed Zones

Load Distribution

Cluster High Availability

Multiple Hierachies

High Availability for Icinga 2 features

High Availability with Checks

High Availability with Notifications

High Availability with DB IDO

Add a new cluster endpoint

Initial Cluster Sync

Host With Multiple Cluster Nodes

52 KiB

Raw Blame History