icinga2/INSTALL.md

7.6 KiB

Installing Icinga 2

The recommended way of installing Icinga 2 is to use packages. The Icinga project provides both release and development packages for a number of operating systems.

Please check the documentation in the doc/ directory for a current list of available packages and detailed installation instructions.

There are a number of known caveats when installing from source such as incorrect directory and file permissions. So even if you're planning to not use the official packages it is advisable to build your own Debian or RPM packages.

Build Requirements

The following requirements need to be fulfilled in order to build the application using a dist tarball (package names for RHEL and Debian in parentheses):

  • cmake
  • GNU make (make)
  • C++ compiler (gcc-c++ on RHEL, build-essential on Debian)
  • OpenSSL library and header files (openssl-devel on RHEL, libssl-dev on Debian)
  • Boost library and header files (boost-devel on RHEL, libboost-all-dev on Debian)
  • GNU bison (bison)
  • GNU flex (flex) >= 2.5.35
  • recommended: libexecinfo on FreeBSD
  • optional: MySQL (mysql-devel on RHEL, libmysqlclient-dev on Debian)
  • optional: PostgreSQL (postgresql-devel on RHEL, libpq-dev on Debian)
  • optional: YAJL (yajl-devel on RHEL, libyajl-dev on Debian)

Note: RHEL5 ships an ancient flex version. Updated packages are available for example from the repoforge buildtools repository.

User Requirements

By default Icinga will run as user 'icinga' and group 'icinga'. Additionally the external command pipe and livestatus features require a dedicated command group 'icingacmd'. You can choose your own user/group names and pass them to CMake using the ICINGA2_USER, ICINGA2_GROUP and ICINGA2_COMMAND_GROUP variables.

# groupadd icinga
# groupadd icingacmd
# useradd -c "icinga" -s /sbin/nologin -G icingacmd -g icinga icinga

Add the web server user to the icingacmd group in order to grant it write permissions to the external command pipe and livestatus socket:

# usermod -a -G icingacmd www-data

Make sure to replace "www-data" with the name of the user your web server is running as.

Building Release Tarballs

In order to build a release tarball you should first check out the Git repository in a new directory. If you're using an existing check-out you should make sure that there are no local modifications:

$ git status

Release Checklist

Here's a short check-list for releases:

Update the .mailmap and AUTHORS files

$ git log --use-mailmap | grep ^Author: | cut -f2- -d' ' | sort | uniq > AUTHORS

Bump the version in icinga2.spec. Update the ChangeLog and doc/1-about.md files. Commit these changes to the "master" branch.

$ git commit -v -a -m "Release version <VERSION>"

Create a signed tag (tags/v).

GB:

$ git tag -u EE8E0720 -m "Version <VERSION>" v<VERSION>

MF:

$ git tag -u D14A1F16 -m "Version <VERSION>" v<VERSION>

Push the tag.

$ git push --tags

Merge the "master" branch into the "support/2.1" branch (using --ff-only).

$ git checkout support/2.1
$ git merge --ff-only master
$ git push origin support/2.1

Note: CMake determines the Icinga 2 version number using git describe if the source directory is contained in a Git repository. Otherwise the version number is extracted from the icinga2.spec file. This behavior can be overridden by creating a file called icinga-version.h.force in the source directory. Alternatively the -DICINGA2_GIT_VERSION_INFO=ON option for CMake can be used to disable the usage of git describe.

Build Tarball

Use git archive to build the release tarball:

$ VERSION=2.1.0
$ git archive --format=tar --prefix=icinga2-$VERSION/ tags/v$VERSION | gzip >icinga2-$VERSION.tar.gz

Finally you should verify that the tarball only contains the files it should contain:

$ VERSION=2.1.0
$ tar ztf icinga2-$VERSION.tar.gz | less

Building Icinga 2

Once you have installed all the necessary build requirements you can build Icinga 2 using the following commands:

$ mkdir build && cd build
$ cmake ..
$ make
$ make install

You can specify an alternative installation prefix using -DCMAKE_INSTALL_PREFIX:

$ cmake .. -DCMAKE_INSTALL_PREFIX=/tmp/icinga2

In addition to CMAKE_INSTALL_PREFIX the following Icinga-specific cmake variables are supported:

  • ICINGA2_USER: The user Icinga 2 should run as; defaults to icinga
  • ICINGA2_GROUP: The group Icinga 2 should run as; defaults to icinga
  • ICINGA2_GIT_VERSION_INFO: Whether to use Git to determine the version number; defaults to ON
  • ICINGA2_COMMAND_GROUP: The command group Icinga 2 should use; defaults to icingacmd
  • ICINGA2_UNITY_BUILD: Whether to perform a unity build
  • ICINGA2_PLUGINDIR: The path for the Monitoring Plugins project binaries; defaults to /usr/lib/nagios/plugins
  • ICINGA2_RUNDIR: The location of the "run" directory; defaults to CMAKE_INSTALL_LOCALSTATEDIR/run
  • CMAKE_INSTALL_SYSCONFDIR: The configuration directory; defaults to CMAKE_INSTALL_PREFIX/etc
  • ICINGA2_SYSCONFIGFILE: Where to put the config file the initscript/systemd pulls it's dirs from; defaults to CMAKE_INSTALL_PREFIX/etc/sysconfig/icinga2
  • CMAKE_INSTALL_LOCALSTATEDIR: The state directory; defaults to CMAKE_INSTALL_PREFIX/var
  • USE_SYSTEMD=ON|OFF: Use systemd or a classic SysV initscript; defaults to OFF
  • INSTALL_SYSTEMD_SERVICE_AND_INITSCRIPT=ON|OFF Force install both the systemd service definition file and the SysV initscript in parallel, regardless of how USE_SYSTEMD is set. Only use this for special packaging purposes and if you know what you are doing. Defaults to OFF.

Building Icinga 2 RPMs

Setup your build environment on RHEL/SUSE and copy the generated tarball from your git repository to rpmbuild/SOURCES. Copy the icinga2.spec file to rpmbuild/SPEC and then invoke

$ rpmbuild -ba SPEC/icinga2.spec

Building Icinga 2 Debs

Setup your build environment on Debian/Ubuntu and run the following command straight from the git repository checkout:

$ ./debian/updateversion && dpkg-buildpackage -uc -us

Running Icinga 2

Icinga 2 comes with a single binary that takes care of loading all the relevant components (e.g. for check execution, notifications, etc.):

# /usr/sbin/icinga2
[2014-06-13 15:29:16 +0200] information/icinga-app: Icinga application loader (version: v2.0.0-beta2-17-gd9289ad)
[2014-06-13 15:29:16 +0200] information/icinga-app: Loading application type: icinga/IcingaApplication
[2014-06-13 15:29:16 +0200] information/Utility: Loading library 'libicinga.so'
[2014-06-13 15:29:16 +0200] information/ConfigCompiler: Adding include search dir: /usr/share/icinga2/include
[2014-06-13 15:29:16 +0200] critical/icinga-app: You need to specify at least one config file (using the --config option).

Icinga 2 can be started as daemon using the provided init script:

# /etc/init.d/icinga2
Usage: /etc/init.d/icinga2 {start|stop|restart|reload|checkconfig|status}

Or if your distribution uses systemd:

# systemctl {start|stop|reload|status|enable|disable} icinga2.service

Icinga 2 reads a single configuration file which is used to specify all configuration settings (global settings, hosts, services, etc.). The configuration format is explained in detail in the doc/ directory.

By default make install installs example configuration files in /usr/local/etc/icinga2 unless you have specified a different prefix or sysconfdir.