icingaweb2/doc/installation.md

Installation

The preferred way of installing Icinga Web 2 is to use the official package repositories depending on which operating system and distribution you are running. But it is also possible to install Icinga Web 2 directly from source.

In case you are upgrading from an older version of Icinga Web 2 please make sure to read the upgrading section thoroughly.

Installing Requirements

• A web server, e.g. Apache or nginx
• PHP >= 5.3.0 w/ gettext, intl and OpenSSL support
• MySQL or PostgreSQL PHP libraries when using a database for authentication or for storing preferences into a database
• LDAP PHP library when using Active Directory or LDAP for authentication
• Icinga 1.x w/ Livestatus or IDO; Icinga 2.x w/ Livestatus or IDO feature enabled
• MySQL or PostgreSQL PHP libraries when using IDO

Installing Icinga Web 2 from Package

Below is a list of official package repositories for installing Icinga Web 2 for various operating systems.

Distribution	Repository
Debian	debmon, Icinga Repository
Ubuntu	Icinga Repository
RHEL/CentOS	Icinga Repository
openSUSE	Icinga Repository
SLES	Icinga Repository
Gentoo	-
FreeBSD	-
ArchLinux	Upstream

Packages for distributions other than the ones listed above may also be available. Please contact your distribution packagers.

Setting up Package Repositories

You need to add the Icinga repository to your package management configuration for installing Icinga Web 2. Below is a list with examples for various distributions.

Debian (debmon):

wget -O - http://debmon.org/debmon/repo.key 2>/dev/null | apt-key add -
echo 'deb http://debmon.org/debmon debmon-wheezy main' >/etc/apt/sources.list.d/debmon.list
apt-get update

Ubuntu Trusty:

wget -O - http://packages.icinga.org/icinga.key | apt-key add -
add-apt-repository 'deb http://packages.icinga.org/ubuntu icinga-trusty main'
apt-get update

For other Ubuntu versions just replace trusty with your distribution's code name.

RHEL and CentOS:

rpm --import http://packages.icinga.org/icinga.key
curl -o /etc/yum.repos.d/ICINGA-release.repo http://packages.icinga.org/epel/ICINGA-release.repo
yum makecache

Fedora:

rpm --import http://packages.icinga.org/icinga.key
curl -o /etc/yum.repos.d/ICINGA-release.repo http://packages.icinga.org/fedora/ICINGA-release.repo
yum makecache

SLES 11:

zypper ar http://packages.icinga.org/SUSE/ICINGA-release-11.repo
zypper ref

SLES 12:

zypper ar http://packages.icinga.org/SUSE/ICINGA-release.repo
zypper ref

openSUSE:

zypper ar http://packages.icinga.org/openSUSE/ICINGA-release.repo
zypper ref

RHEL/CentOS Notes

The packages for RHEL/CentOS depend on other packages which are distributed as part of the EPEL repository. Please make sure to enable this repository by following these instructions.

Please note that installing Icinga Web 2 on RHEL/CentOS 5 is not supported due to EOL versions of PHP and PostgreSQL.

Debian wheezy Notes

The packages for Debian wheezy depend on other packages which are distributed as part of the wheezy-packports repository. Please make sure to enable this repository by following these instructions.

Installing Icinga Web 2

You can install Icinga Web 2 by using your distribution's package manager to install the icingaweb2 package. Below is a list with examples for various distributions. The additional package icingacli is necessary on RPM based systems for being able to follow further steps in this guide. In DEB based systems, the icingacli binary is included in the icingaweb2 package.

Debian and Ubuntu:

apt-get install icingaweb2

For Debian wheezy please read the package repositories notes.

RHEL, CentOS and Fedora:

yum install icingaweb2 icingacli

For RHEL/CentOS please read the package repositories notes.

SLES and openSUSE:

zypper install icingaweb2 icingacli

Preparing Web Setup

You can set up Icinga Web 2 quickly and easily with the Icinga Web 2 setup wizard which is available the first time you visit Icinga Web 2 in your browser. When using the web setup you are required to authenticate using a token. In order to generate a token use the icingacli:

icingacli setup token create

In case you do not remember the token you can show it using the icingacli:

icingacli setup token show

Finally visit Icinga Web 2 in your browser to access the setup wizard and complete the installation: /icingaweb2/setup.

Installing Icinga Web 2 from Source

Although the preferred way of installing Icinga Web 2 is to use packages, it is also possible to install Icinga Web 2 directly from source.

Getting the Source

First of all, you need to download the sources. Icinga Web 2 is available through a Git repository. You can clone this repository either via git or http protocol using the following URLs:

• git://git.icinga.org/icingaweb2.git
• http://git.icinga.org/icingaweb2.git

There is also a browsable version available at git.icinga.org. This version also offers snapshots for easy download which you can use if you do not have git present on your system.

git clone git://git.icinga.org/icingaweb2.git

Installing Requirements from Source

You will need to install certain dependencies depending on your setup listed here.

The following example installs Apache2 as web server, MySQL as RDBMS and uses the PHP adapter for MySQL. Adopt the package requirements to your needs (e.g. adding ldap for authentication) and distribution.

Example for RHEL/CentOS/Fedora:

yum install httpd mysql-server
yum install php php-gd php-intl php-ZendFramework php-ZendFramework-Db-Adapter-Pdo-Mysql

The setup wizard will check the pre-requisites later on.

Installing Icinga Web 2

Choose a target directory and move Icinga Web 2 there.

mv icingaweb2 /usr/share/icingaweb2

Configuring the Web Server

Use icingacli to generate web server configuration for either Apache or nginx.

Apache:

./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public

nginx:

./bin/icingacli setup config webserver nginx --document-root /usr/share/icingaweb2/public

Save the output as new file in your webserver's configuration directory.

Example for Apache on RHEL or CentOS:

./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public > /etc/httpd/conf.d/icingaweb2.conf

Example for Apache on SUSE:

./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public > /etc/apache2/conf.d/icingaweb2.conf

Example for Apache on Debian Jessie:

./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public > /etc/apache2/conf-available/icingaweb2.conf
a2enconf icingaweb2

Preparing Icinga Web 2 Setup

You can set up Icinga Web 2 quickly and easily with the Icinga Web 2 setup wizard which is available the first time you visit Icinga Web 2 in your browser. Please follow the steps listed below for preparing the web setup.

Because both web and CLI must have access to configuration and logs, permissions will be managed using a special system group. The web server user and CLI user have to be added to this system group.

Add the system group icingaweb2 in the first place.

Fedora, RHEL, CentOS, SLES and OpenSUSE:

groupadd -r icingaweb2

Debian and Ubuntu:

addgroup --system icingaweb2

Add your web server's user to the system group icingaweb2 and restart the web server:

Fedora, RHEL and CentOS:

usermod -a -G icingaweb2 apache
service httpd restart

SLES and OpenSUSE:

usermod -A icingaweb2 wwwrun
service apache2 restart

Debian and Ubuntu:

usermod -a -G icingaweb2 www-data
service apache2 restart

Use icingacli to create the configuration directory which defaults to /etc/icingaweb2:

./bin/icingacli setup config directory

When using the web setup you are required to authenticate using a token. In order to generate a token use the icingacli:

./bin/icingacli setup token create

In case you do not remember the token you can show it using the icingacli:

./bin/icingacli setup token show

Icinga Web 2 Setup Wizard

Finally visit Icinga Web 2 in your browser to access the setup wizard and complete the installation: /icingaweb2/setup.

Paste the previously generated token and follow the steps on-screen. Then you are done here.

Icinga Web 2 Manual Setup

If you have chosen not to run the setup wizard, you will need further knowledge about

• manual creation of the Icinga Web 2 database icingaweb2 including a default user (optional as authentication and session backend)
• additional configuration for the application
• additional configuration for the monitoring module (e.g. the IDO database and external command pipe from Icinga 2)

This comes in handy if you are planning to deploy Icinga Web 2 automatically using Puppet, Ansible, Chef, etc. modules.

Warning

Read the documentation on the respective linked configuration sections before deploying the configuration manually.

If you are unsure about certain settings, use the setup wizard once and then collect the generated configuration as well as sql dumps.

Icinga Web 2 Manual Database Setup

Create the database and add a new user as shown below for MySQL:

sudo mysql -p

CREATE DATABASE icingaweb2;
GRANT SELECT, INSERT, UPDATE, DELETE, DROP, CREATE VIEW, INDEX, EXECUTE ON icingaweb2.* TO 'icingaweb2'@'localhost' IDENTIFIED BY 'icingaweb2';
quit

mysql -p icingaweb2 < /usr/share/icingaweb2/etc/schema/mysql.schema.sql

Then generate a new password hash as described in the authentication docs and use it to insert a new user called icingaadmin into the database.

mysql -p icingaweb2

INSERT INTO icingaweb_user (name, active, password_hash) VALUES ('icingaadmin', 1, '$1$EzxLOFDr$giVx3bGhVm4lDUAw6srGX1');
quit

Icinga Web 2 Manual Configuration

resources.ini providing the details for the Icinga Web 2 and Icinga 2 IDO database configuration. Example for MySQL:

vim /etc/icingaweb2/resources.ini

[icingaweb2]
type                = "db"
db                  = "mysql"
host                = "localhost"
port                = "3306"
dbname              = "icingaweb2"
username            = "icingaweb2"
password            = "icingaweb2"


[icinga2]
type                = "db"
db                  = "mysql"
host                = "localhost"
port                = "3306"
dbname              = "icinga"
username            = "icinga"
password            = "icinga"

config.ini defining general application settings.

vim /etc/icingaweb2/config.ini

[logging]
log                 = "syslog"
level               = "ERROR"
application         = "icingaweb2"


[preferences]
type                = "db"
resource            = "icingaweb2"

authentication.ini for e.g. using the previously created database.

vim /etc/icingaweb2/authentication.ini

[icingaweb2]
backend             = "db"
resource            = "icingaweb2"

roles.ini granting the previously added icingaadmin user all permissions.

vim /etc/icingaweb2/roles.ini

[admins]
users               = "icingaadmin"
permissions         = "*"

Icinga Web 2 Manual Configuration Monitoring Module

config.ini defining additional security settings.

vim /etc/icingaweb2/modules/monitoring/config.ini

[security]
protected_customvars = "*pw*,*pass*,community"

backends.ini referencing the Icinga 2 DB IDO resource.

vim /etc/icingaweb2/modules/monitoring/backends.ini

[icinga2]
type                = "ido"
resource            = "icinga2"

commandtransports.ini defining the Icinga 2 command pipe.

vim /etc/icingaweb2/modules/monitoring/commandtransports.ini

[icinga2]
transport           = "local"
path                = "/var/run/icinga2/cmd/icinga2.cmd"

Icinga Web 2 Manual Setup Login

Finally visit Icinga Web 2 in your browser to login as icingaadmin user: /icingaweb2.

Upgrading Icinga Web 2

Upgrading to Icinga Web 2 Beta 2

Icinga Web 2 Beta 2 introduces access control based on roles for secured actions. If you've already set up Icinga Web 2, you are required to create the file roles.ini beneath Icinga Web 2's configuration directory with the following content:

[administrators]
users = "your_user_name, another_user_name"
permissions = "*"

After please log out from Icinga Web 2 and log in again for having all permissions granted.

If you delegated authentication to your web server using the autologin backend, you have to switch to the external authentication backend to be able to log in again. The new name better reflects what’s going on. A similar change affects environments that opted for not storing preferences, your new backend is none.

Upgrading to Icinga Web 2 Beta 3

Because Icinga Web 2 Beta 3 does not introduce any backward incompatible change you don't have to change your configuration files after upgrading to Icinga Web 2 Beta 3.

Upgrading to Icinga Web 2 Release Candidate 1

The first release candidate of Icinga Web 2 introduces the following non-backward compatible changes:

• The database schema has been adjusted and the tables icingaweb_group and icingaweb_group_membership were altered to ensure referential integrity. Please use the upgrade script located in etc/schema/ to update your database schema

• Users who are using PostgreSQL < v9.1 are required to upgrade their environment to v9.1+ as this is the new minimum required version for utilizing PostgreSQL as database backend

• The restrictions monitoring/hosts/filter and monitoring/services/filter provided by the monitoring module were merged together. The new restriction is called monitoring/filter/objects and supports only a predefined subset of filter columns. Please see the module's security related documentation for more details.

Upgrading to Icinga Web 2 2.0.0

• Icinga Web 2 installations from package on RHEL/CentOS 7 now depend on php-ZendFramework which is available through the EPEL repository. Before, Zend was installed as Icinga Web 2 vendor library through the package icingaweb2-vendor-zend. After upgrading, please make sure to remove the package icingaweb2-vendor-zend.

• Icinga Web 2 version 2.0.0 requires permissions for accessing modules. Those permissions are automatically generated for each installed module in the format module/<moduleName>. Administrators have to grant the module permissions to users and/or user groups in the roles configuration for permitting access to specific modules. In addition, restrictions provided by modules are now configurable for each installed module too. Before, a module had to be enabled before having the possibility to configure restrictions.

• The instances.ini configuration file provided by the monitoring module has been renamed to commandtransports.ini. The content and location of the file remains unchanged.

• The location of a user's preferences has been changed from <config-dir>/preferences/<username>.ini to <config-dir>/preferences/<username>/config.ini. The content of the file remains unchanged.

Upgrading to Icinga Web 2 2.1.x

• Since Icinga Web 2 version 2.1.3 LDAP user group backends respect the configuration option group_filter. Users who changed the configuration manually and used the option filter instead have to change it back to group_filter.