-C does not match, which allows it to work when sshd_config contains a Match
directive with or without -C. bz#2858, ok djm@
OpenBSD-Commit-ID: 1a701f0a33e3bc96753cfda2fe0b0378520b82eb
1. Recently-forked child processes will briefly remain listening to
listen_socks. If the main server sshd process completes its restart
via execv() before these sockets are closed by the child processes
then it can fail to listen at the desired addresses/ports and/or
fail to restart.
2. When a SIGHUP is received, there may be forked child processes that
are awaiting their reexecution state. If the main server sshd
process restarts before passing this state, these child processes
will yield errors and use a fallback path of reading the current
sshd_config from the filesystem rather than use the one that sshd
was started with.
To fix both of these cases, we reuse the startup_pipes that are shared
between the main server sshd and forked children. Previously this was
used solely to implement tracking of pre-auth child processes for
MaxStartups, but this extends the messaging over these pipes to include
a child->parent message that the parent process is safe to restart. This
message is sent from the child after it has completed its preliminaries:
closing listen_socks and receiving its reexec state.
bz#2953, reported by Michal Koutný; ok markus@ dtucker@
OpenBSD-Commit-ID: 7df09eacfa3ce13e9a7b1e9f17276ecc924d65ab
sntrup4591761x25519-sha512@tinyssh.org using the Streamlined NTRU Prime
4591^761 implementation from SUPERCOP coupled with X25519 as a stop-loss. Not
enabled by default.
introduce KEM API; a simplified framework for DH-ish KEX methods.
from markus@ feedback & ok djm@
OpenBSD-Commit-ID: d687f76cffd3561dd73eb302d17a1c3bf321d1a7
API, started almost exactly six years ago.
This change stops including the old packet_* API by default and makes
each file that requires the old API include it explicitly. We will
commit file-by-file refactoring to remove the old API in consistent
steps.
with & ok markus@
OpenBSD-Commit-ID: 93c98a6b38f6911fd1ae025a1ec57807fb4d4ef4
ssh->kex and factor out the banner exchange. This eliminates some common code
from the client and server.
Also be more strict about handling \r characters - these should only
be accepted immediately before \n (pointed out by Jann Horn).
Inspired by a patch from Markus Schmidt.
(lots of) feedback and ok markus@
OpenBSD-Commit-ID: 1cc7885487a6754f63641d7d3279b0941890275b
Don't call OpenSSL_add_all_algorithms() unless OpenSSL actually
supports it.
Move all libcrypto initialisation to a single function, and call that
from seed_rng() that is called early in each tool's main().
Prompted by patch from Rosen Penev
loading the default hostkeys. Hostkeys explicitly specified in the
configuration or on the command-line are still reported as errors, and
failure to load at least one host key remains a fatal error.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Based on patch from Dag-Erling Smørgrav via
https://github.com/openssh/openssh-portable/pull/103
ok markus@
OpenBSD-Commit-ID: ffc2e35a75d1008effaf05a5e27425041c27b684
- Updated code to dynamic load Lsa functions until RS5 SDK includes them
- Add conpty support in openssh
- Fixed Wierd characters (?25l) are seen, when logged in from ssh client
- Backspace doesn't work in powershell window
- Changes to support ssh-shellhost as an alternative shell
- Added support to have ssh-shellhost work as a standby shell (ssh-shellhost -c "cmdline") simply executes cmdline via CreateProcess
- Added E2E test cases and fixed unittests broken from prior changes
- Added PTY launch interface that supports both conpty and ssh-shellhost pty.
- Implemented PTY control channel in ssh-shellhost that supports Window resize events.
- Fixed regression with starting a PTY session with an explicit command
- modified ssh-shellhost pty argument to ---pty to remove ambiguity in cases when both -p and -c are present in commandline. Ex. ssh-shellhost.exe -c "myprogram -p -c argument"
OIDs by calling ssh_gssapi_prepare_supported_oids() regardless of whether
GSSAPI authentication is enabled in the main config.
This avoids sandbox violations for configurations that enable GSSAPI
auth later, e.g.
Match user djm
GSSAPIAuthentication yes
bz#2107; ok dtucker@
OpenBSD-Commit-ID: a5dd42d87c74e27cfb712b15b0f97ab20e0afd1d
causes double-free under some circumstances.
--
date: 2018/07/31 03:07:24; author: djm; state: Exp; lines: +33 -18; commitid: f7g4UI8eeOXReTPh;
fix some memory leaks spotted by Coverity via Jakub Jelen in bz#2366
feedback and ok dtucker@
OpenBSD-Commit-ID: 1e77547f60fdb5e2ffe23e2e4733c54d8d2d1137
- Logic to support conpty (currently disabled until validation is complete)
- fdopen() and fchmod() support for file handles
- support for auto updating known_hosts via ssh and ssh-keygen
- Support for dynamic Windows-size changes with PTY
- Changes to support OneCore SDK
- Test cases
Current group membership resolution though very effective, is very slow. In a typical domain joined enterprise machine, adding a simple entry like the following in sshd_config
AllowGroups administrators
will incur a long delay in remote session establishment as sshd tried to pull all groups associated with the domain user.
Changes in this PR optimize the general case scenarios where no wild cards are in use. Specifically rules like this are processed promptly:
AllowGroups group1, group2, group3 //with no wild cards
Match Group group1 //single group with no negation and wild cards
Optimization is done by resolve the groupname in rule immediately to SID and checking its membership against user token. Enumerating the entire group membership is done on a lazy on-demand basis.
Beyond the optimization, there are 2 functional changes
- removed domain prefix for builtin groups
- removed domain prefix'ed versions of local groups since we are strictly following the convention that local principals shouldn't have any domain qualification.
In ssh, when an agent fails to return a RSA-SHA2 signature when
requested and falls back to RSA-SHA1 instead, retry the signature to
ensure that the public key algorithm sent in the SSH_MSG_USERAUTH
matches the one in the signature itself.
In sshd, strictly enforce that the public key algorithm sent in the
SSH_MSG_USERAUTH message matches what appears in the signature.
Make the sshd_config PubkeyAcceptedKeyTypes and
HostbasedAcceptedKeyTypes options control accepted signature algorithms
(previously they selected supported key types). This allows these
options to ban RSA-SHA1 in favour of RSA-SHA2.
Add new signature algorithms "rsa-sha2-256-cert-v01@openssh.com" and
"rsa-sha2-512-cert-v01@openssh.com" to force use of RSA-SHA2 signatures
with certificate keys.
feedback and ok markus@
OpenBSD-Commit-ID: c6e9f6d45eed8962ad502d315d7eaef32c419dde
- Added chroot implementation that simply stores the path in internal state and sets an environment variable
- Spawned processes pickup chroot from environment variable
- Core change in realpath and resolved_path_utf16 now take into account chroot path.
- Unit tests
- Other miscellaneous changes to account for chroot enabled logic in core code
PowerShell/Win32-OpenSSH#190PowerShell/Win32-OpenSSH#292
establishes a minimum time for each failed authentication attempt (5ms) and
adds a per-user constant derived from a host secret (0-4ms). Based on work
by joona.kannisto at tut.fi, ok markus@ djm@.
OpenBSD-Commit-ID: b7845b355bb7381703339c8fb0e57e81a20ae5ca
Issue: When sshd times out due to login grace timeout, it leaves behind the unprivileged worker orphaned.
Fix: Add missing child's reference in monitor.
remove the legacy one.
Includes a fairly big refactor of auth2-pubkey.c to retain less state
between key file lines.
feedback and ok markus@
OpenBSD-Commit-ID: dece6cae0f47751b9892080eb13d6625599573df
PowerShell/Win32-OpenSSH#1065
Fix: In recent sshd architectural changes, post authentication changes that process user specific changes were missing in authenticated sshd worker. Added missing call.
PowerShell/Win32-OpenSSH#1052
Fix: getpwd* functions will now strip off domain of any local user account.
The code required to support it is quite invasive to the mainline
code that is synced with upstream and is an ongoing maintenance burden.
Both the hardware and software are literal museum pieces these days and
we could not find anyone still running OpenSSH on one.
The signal handlers from the original ssh1 code on which OpenSSH
is based assume unreliable signals and reinstall their handlers.
Since OpenBSD (and pretty much every current system) has reliable
signals this is not needed. In the unlikely even that -portable
is still being used on such systems we will deal with it in the
compat layer. ok deraadt@
OpenBSD-Commit-ID: f53a1015cb6908431b92116130d285d71589612c
Fix a logic bug in sshd_exchange_identification which
prevented clients using major protocol version 2 from connecting to the
server. ok millert@
OpenBSD-Commit-ID: 8668dec04586e27f1c0eb039ef1feb93d80a5ee9
Drop compatibility hacks for some ancient SSH
implementations, including ssh.com <=2.* and OpenSSH <= 3.*.
These versions were all released in or before 2001 and predate the
final SSH RFCs. The hacks in question aren't necessary for RFC-
compliant SSH implementations.
ok markus@
OpenBSD-Commit-ID: 4be81c67db57647f907f4e881fb9341448606138
unbreak support for clients that advertise a protocol
version of "1.99" (indicating both v2 and v1 support). Busted by me during
SSHv1 purge in r1.358; bz2810, ok dtucker
OpenBSD-Commit-ID: e8f9c2bee11afc16c872bb79d6abe9c555bd0e4b
avoid modifying pw->pw_passwd; let endpwent() clean up
for us, but keep a scrubbed copy; bz2777, ok dtucker@
OpenBSD-Commit-ID: 715afc0f59c6b82c4929a73279199ed241ce0752
OpenSSh privilege separation model - http://www.citi.umich.edu/u/provos/ssh/privsep.html
Posix_spawn is implemented in POSIX adapter as an alternative to fork() that is heavily used in Privilege separation.
Additional state info is added to sshd to accommodate distinguishing the various modes (privileged monitor, unprivileged child, authenticated child).
Required service state (like config and host keys) is transmitted over pipes from monitor to child processes.
Changes to installation scripts and tests to accomodate new architectural changes
fix problem in configuration parsing when in config dump mode
(sshd -T) without providing a full connection specification (sshd -T -C ...)
spotted by bluhm@
OpenBSD-Commit-ID: 7125faf5740eaa9d3a2f25400a0bc85e94e28b8f
When doing a config test with sshd -T, only require the
attributes that are actually used in Match criteria rather than (an
incomplete list of) all criteria. ok djm@, man page help jmc@
OpenBSD-Commit-ID: b4e773c4212d3dea486d0259ae977551aab2c1fc
add a "rdomain" criteria for the sshd_config Match
keyword to allow conditional configuration that depends on which rdomain(4) a
connection was recevied on. ok markus@
Upstream-ID: 27d8fd5a3f1bae18c9c6e533afdf99bff887a4fb
add sshd_config RDomain keyword to place sshd and the
subsequent user session (including the shell and any TCP/IP forwardings) into
the specified rdomain(4)
ok markus@
Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
replace statically-sized arrays in ServerOptions with
dynamic ones managed by xrecallocarray, removing some arbitrary (though
large) limits and saving a bit of memory; "much nicer" markus@
Upstream-ID: 1732720b2f478fe929d6687ac7b0a97ff2efe9d2
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
remove post-SSHv1 removal dead code from rsa.c and merge
the remaining bit that it still used into ssh-rsa.c; ok markus
Upstream-ID: ac8a048d24dcd89594b0052ea5e3404b473bfa2f
If running with privsep (mandatory now) as a non-privileged user, we
don't chroot or change to an unprivileged user however we still checked
the existence of the user and directory. Don't do those checks if we're
not going to use them. Based in part on a patch from Lionel Fourquaux
via Corinna Vinschen, ok djm@
Fix segfault when sshd attempts to load RSA1 keys (can
only happen when protocol v.1 support is enabled for the client). Reported by
Jakub Jelen in bz#2686; ok dtucker
Upstream-ID: 8fdaec2ba4b5f65db1d094f6714ce64b25d871d7
Restore \r\n newline sequence for server ident string. The CR
got lost in the flensing of SSHv1. Pointed out by Stef Bon
Upstream-ID: 5333fd43ce5396bf5999496096fac5536e678fac
Make ssh_packet_set_rekey_limits take u32 for the number of
seconds until rekeying (negative values are rejected at config parse time).
This allows the removal of some casts and a signed vs unsigned comparison
warning.
rekey_time is cast to int64 for the comparison which is a no-op
on OpenBSD, but should also do the right thing in -portable on
anything still using 32bit time_t (until the system time actually
wraps, anyway).
some early guidance deraadt@, ok djm@
Upstream-ID: c9f18613afb994a07e7622eb326f49de3d123b6c
log connections dropped in excess of MaxStartups at
verbose LogLevel; bz#2613 based on diff from Tomas Kuthan; ok dtucker@
Upstream-ID: 703ae690dbf9b56620a6018f8a3b2389ce76d92b
Unlink PidFile on SIGHUP and always recreate it when the
new sshd starts. Regression tests (and possibly other things) depend on the
pidfile being recreated after SIGHUP, and unlinking it means it won't contain
a stale pid if sshd fails to restart. ok djm@ markus@
Upstream-ID: 132dd6dda0c77dd49d2f15b2573b5794f6160870
Manoj Ampalam
Manoj Ampalam
dtucker@openbsd.org
djm@openbsd.org
Damien Miller
markus@openbsd.org
Darren Tucker
bagajjal
stsp@openbsd.org
djm@openbsd.org@openbsd.org
dtucker@openbsd.org@openbsd.org
Oleg S
Darren Tucker
Yanbing
deraadt@openbsd.org