to obtain known_hosts data from a command in addition to the usual files.
The command accepts bunch of %-expansions, including details of the
connection and the offered server host key. Note that the command may
be invoked up to three times per connection (see the manpage for
details).
ok markus@
OpenBSD-Commit-ID: 2433cff4fb323918ae968da6ff38feb99b4d33d0
consolidate the common arguments into a single struct and pass that around
instead of using a bunch of globals. ok markus@
OpenBSD-Commit-ID: 035e6d7ca9145ad504f6af5a021943f1958cd19b
key (commitid VtF8vozGOF8DMKVg). We now do this a simpler way that needs less
plumbing.
ok markus@
OpenBSD-Commit-ID: fb92d25b216bff8c136da818ac2221efaadf18ed
certificate host key to a plain key. This occurs when the user connects to a
host with a certificate host key but no corresponding CA key configured in
known_hosts; feedback and ok markus@
OpenBSD-Commit-ID: 2ada81853ff9ee7824c62f440bcf4ad62030c901
speculation and memory sidechannel attacks like Spectre, Meltdown, Rowhammer
and Rambleed. This change encrypts private keys when they are not in use with
a symmetic key that is derived from a relatively large "prekey" consisting of
random data (currently 16KB).
Attackers must recover the entire prekey with high accuracy before
they can attempt to decrypt the shielded private key, but the current
generation of attacks have bit error rates that, when applied
cumulatively to the entire prekey, make this unlikely.
Implementation-wise, keys are encrypted "shielded" when loaded and then
automatically and transparently unshielded when used for signatures or
when being saved/serialised.
Hopefully we can remove this in a few years time when computer
architecture has become less unsafe.
been in snaps for a bit already; thanks deraadt@
ok dtucker@ deraadt@
OpenBSD-Commit-ID: 19767213c312e46f94b303a512ef8e9218a39bd4
ssh->kex and factor out the banner exchange. This eliminates some common code
from the client and server.
Also be more strict about handling \r characters - these should only
be accepted immediately before \n (pointed out by Jann Horn).
Inspired by a patch from Markus Schmidt.
(lots of) feedback and ok markus@
OpenBSD-Commit-ID: 1cc7885487a6754f63641d7d3279b0941890275b
ssh(1) setuid has been removed, remove supporting code and clean up
references to it in the man pages
We have not shipped ssh(1) the setuid bit since 2002. If ayone
really needs to make connections from a low port number this can
be implemented via a small setuid ProxyCommand.
ok markus@ jmc@ djm@
OpenBSD-Commit-ID: d03364610b7123ae4c6792f5274bd147b6de717e
attempted. Do not link uidwap.c into ssh any more. Neuters
UsePrivilegedPort, which will be marked as deprecated shortly. ok markus@
djm@
OpenBSD-Commit-ID: c4ba5bf9c096f57a6ed15b713a1d7e9e2e373c42
directly in ssh(1) and always use ssh-keysign. This removes one of the few
remaining reasons why ssh(1) might be setuid. ok markus@
OpenBSD-Commit-ID: 97f01e1448707129a20d75f86bad5d27c3cf0b7d
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
[sshconnect.c sshconnect.h]
Implement client-side hostname canonicalisation to allow an explicit
search path of domain suffixes to use to convert unqualified host names
to fully-qualified ones for host key matching.
This is particularly useful for host certificates, which would otherwise
need to list unqualified names alongside fully-qualified ones (and this
causes a number of problems).
"looks fine" markus@
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c
monitor.c]
Keep track of number of bytes read and written. Needed for upcoming
changes. Most code from Martin Forssen, maf at appgate dot com.
ok markus@
[ssh.c sshconnect.c sshconnect.h]
make ssh(1)'s ConnectTimeout option apply to both the TCP connection and
SSH banner exchange (previously it just covered the TCP connection).
This allows callers of ssh(1) to better detect and deal with stuck servers
that accept a TCP connection but don't progress the protocol, and also
makes ConnectTimeout useful for connections via a ProxyCommand;
feedback and "looks ok" markus@
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
[ssh.c sshconnect.c sshconnect.h]
no longer use uidswap.[ch] from the ssh client
run less code with euid==0 if ssh is installed setuid root
just switch the euid, don't switch the complete set of groups
(this is only needed by sshd). ok provos@
[authfile.c authfile.h pathnames.h ssh.c sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c ssh-keysign.8 ssh-keysign.c Makefile.in]
add /usr/libexec/ssh-keysign: a setuid helper program for hostbased
authentication in protocol v2 (needs to access the hostkeys).
Note: Makefile.in untested. Will test after merge is finished.
[kexdh.c kexgex.c kex.h pathnames.h readconf.c servconf.h ssh.1
sshconnect1.c sshconnect2.c sshconnect.c sshconnect.h sshd.8]
get rid of known_hosts2, use it for hostkey lookup, but do not
modify.
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth2.c channels.c session.c
ssh.c sshconnect.c sshconnect.h uidswap.c uidswap.h]
do gid/groups-swap in addition to uid-swap, should help if /home/group
is chmod 750 + chgrp grp /home/group/, work be deraadt and me, thanks
to olar@openwall.com is comments. we had many requests for this.
NEED TO BE GENERATED* =) Refer to to entry "2001/01/16 19:20:06"
for more details.
20010118
- (bal) Super Sized OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/11 22:14:20 GMT 2001 by markus
[sshd.c]
maxfd+1
- markus@cvs.openbsd.org 2001/01/13 17:59:18
[ssh-keygen.1]
small ssh-keygen manpage cleanup; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:03:07
[scp.c ssh-keygen.c sshd.c]
getopt() returns -1 not EOF; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:06:54
[ssh-keyscan.c]
use SSH_DEFAULT_PORT; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:12:47
[ssh-keyscan.c]
free() -> xfree(); fix memory leak; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:14:13
[ssh-add.c]
typo, from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2001/01/13 18:32:50
[packet.c session.c ssh.c sshconnect.c sshd.c]
split out keepalive from packet_interactive (from dale@accentre.com)
set IPTOS_LOWDELAY TCP_NODELAY IPTOS_THROUGHPUT for ssh2, too.
- markus@cvs.openbsd.org 2001/01/13 18:36:45
[packet.c packet.h]
reorder, typo
- markus@cvs.openbsd.org 2001/01/13 18:38:00
[auth-options.c]
fix comment
- markus@cvs.openbsd.org 2001/01/13 18:43:31
[session.c]
Wall
- markus@cvs.openbsd.org 2001/01/13 19:14:08
[clientloop.h clientloop.c ssh.c]
move callback to headerfile
- markus@cvs.openbsd.org 2001/01/15 21:40:10
[ssh.c]
use log() instead of stderr
- markus@cvs.openbsd.org 2001/01/15 21:43:51
[dh.c]
use error() not stderr!
- markus@cvs.openbsd.org 2001/01/15 21:45:29
[sftp-server.c]
rename must fail if newpath exists, debug off by default
- markus@cvs.openbsd.org 2001/01/15 21:46:38
[sftp-server.c]
readable long listing for sftp-server, ok deraadt@
- markus@cvs.openbsd.org 2001/01/16 19:20:06
[key.c ssh-rsa.c]
make "ssh-rsa" key format for ssh2 confirm to the ietf-drafts; from
galb@vandyke.com. note that you have to delete older ssh2-rsa keys,
since they are in the wrong format, too. they must be removed from
.ssh/authorized_keys2 and .ssh/known_hosts2, etc.
(cd; grep -v ssh-rsa .ssh/authorized_keys2 > TMP && mv TMP
.ssh/authorized_keys2) additionally, we now check that
BN_num_bits(rsa->n) >= 768.
- markus@cvs.openbsd.org 2001/01/16 20:54:27
[sftp-server.c]
remove some statics. simpler handles; idea from nisse@lysator.liu.se
- deraadt@cvs.openbsd.org 2001/01/16 23:58:08
[bufaux.c radix.c sshconnect.h sshconnect1.c]
indent
- (bal) Added bsd-strmode.[ch] since some non-OpenBSD platforms may
be missing such feature.
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
djm@openbsd.org
kn@openbsd.org
dtucker@openbsd.org
markus@openbsd.org
jcs@openbsd.org
Damien Miller
Darren Tucker
Ben Lindstrom