[chacha.h cipher-chachapoly.h digest.h hmac.h kex.h kexc25519.c]
[misc.h poly1305.h ssh-pkcs11.c defines.h]
revert __bounded change; it causes way more problems for portable than
it solves; pointed out by dtucker@
[misc.c misc.h umac.c]
use get/put_u32 to load values rather than *((UINT32 *)p) that breaks on
strict-alignment architectures; reported by and ok stsp@
[chacha.h cipher-chachapoly.h digest.h hmac.h kex.h kexc25519.c
[misc.h poly1305.h ssh-pkcs11.c]
use __bounded(...) attribute recently added to sys/cdefs.h instead of
longform __attribute__(__bounded(...));
for brevity and a warning free compilation with llvm/clang
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
[misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h]
[openbsd-compat/timingsafe_bcmp.c]
Add timingsafe_bcmp(3) to libc, mention that it's already in the
kernel in kern(9), and remove it from OpenSSH.
ok deraadt@, djm@
NB. re-added under openbsd-compat/ for portable OpenSSH
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
[packet.c ssh-rsa.c]
implement a timing_safe_cmp() function to compare memory without leaking
timing information by short-circuiting like memcmp() and use it for
some of the more sensitive comparisons (though nothing high-value was
readily attackable anyway); "looks ok" markus@
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
set IPV6_V6ONLY for local forwarding with GatwayPorts=yes. Unify
setting IPV6_V6ONLY behind a new function misc.c:sock_set_v6only()
report and fix from jan.kratochvil AT redhat.com
[sshd.c sshconnect.c packet.h misc.c misc.h packet.c]
Make keepalive timeouts apply while waiting for a packet, particularly
during key renegotiation (bz #1363). With djm and Matt Day, ok djm@
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c
sshd.c]
Add a small helper function to consistently handle the EAI_SYSTEM error
code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417.
ok markus@ stevesk@
[misc.c misc.h sshd.8 sshconnect.c]
Add port identifier to known_hosts for non-default ports, based originally
on a patch from Devin Nate in bz#910.
For any connection using the default port or using a HostKeyAlias the
format is unchanged, otherwise the host name or address is enclosed
within square brackets in the same format as sshd's ListenAddress.
Tested by many, ok markus@.
[authfd.c bufaux.c deattack.c gss-serv.c mac.c misc.c misc.h]
[monitor_wrap.c msg.c packet.c sftp-client.c sftp-server.c ssh-agent.c]
replace {GET,PUT}_XXBIT macros with functionally similar functions,
silencing a heap of lint warnings. also allows them to use
__bounded__ checking which can't be applied to macros; requested
by and feedback from deraadt@
[misc.c misc.h scp.c sftp.c]
fix local arbitrary command execution vulnerability on local/local and
remote/remote copies (CVE-2006-0225, bz #1094), patch by
t8m AT centrum.cz, polished by dtucker@ and myself; ok markus@
[auth-options.c includes.h misc.c misc.h readconf.c servconf.c]
[serverloop.c ssh.c ssh_config.5 sshd_config.5 configure.ac]
two changes to the new ssh tunnel support. this breaks compatibility
with the initial commit but is required for a portable approach.
- make the tunnel id u_int and platform friendly, use predefined types.
- support configuration of layer 2 (ethernet) or layer 3
(point-to-point, default) modes. configuration is done using the
Tunnel (yes|point-to-point|ethernet|no) option is ssh_config(5) and
restricted by the PermitTunnel (yes|point-to-point|ethernet|no) option
in sshd_config(5).
ok djm@, man page bits by jmc@
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
[channels.c clientloop.c clientloop.h misc.c misc.h ssh.c ssh_config.5]
implement support for X11 and agent forwarding over multiplex slave
connections. Because of protocol limitations, the slave connections inherit
the master's DISPLAY and SSH_AUTH_SOCK rather than distinctly forwarding
their own.
ok dtucker@ "put it in" deraadt@
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h]
[misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5]
[sshd_config.5]
bz#413: allow optional specification of bind address for port forwardings.
Patch originally by Dan Astorian, but worked on by several people
Adds GatewayPorts=clientspecified option on server to allow remote
forwards to bind to client-specified ports.
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h ssh.h sshd.8]
Discard over-length authorized_keys entries rather than complaining when
they don't decode. bz #884, with & ok djm@
[clientloop.c misc.h readconf.c readpass.c ssh.c ssh_config.5]
Add option for confirmation (ControlMaster=ask) via ssh-askpass before
opening shared connections; ok markus@
[auth.c clientloop.c misc.h servconf.c ssh.c sshpty.h sshtty.c
tildexpand.c], removed: sshtty.h tildexpand.h
make two tiny header files go away; djm ok
- stevesk@cvs.openbsd.org 2002/01/24 21:09:25
[channels.c misc.c misc.h packet.c]
add set_nodelay() to set TCP_NODELAY on a socket (prep for nagle tuning).
no nagle changes just yet; ok djm@ markus@
[misc.c misc.h servconf.c sshd.8 sshd.c]
sshd command-line arguments and configuration file options that
specify time may be expressed using a sequence of the form:
time[qualifier], where time is a positive integer value and qualifier
is one of the following:
<none>,s,m,h,d,w
Examples:
600 600 seconds (10 minutes)
10m 10 minutes
1h30m 1 hour 30 minutes (90 minutes)
ok markus@
Damien Miller
Darren Tucker
Ben Lindstrom
Kevin Steves