some arbitrary value < 0. errno is only updated in this case. Change all
(most?) callers of syscalls to follow this better, and let's see if this
strictness helps us in the future.
OpenBSD-Commit-ID: 48081f00db7518e3b712a49dca06efc2a5428075
malloc_options. Prepares for changes in the way malloc is initialized. ok
guenther@ dtucker@
OpenBSD-Commit-ID: 154f4e3e174f614b09f792d4d06575e08de58a6b
API, started almost exactly six years ago.
This change stops including the old packet_* API by default and makes
each file that requires the old API include it explicitly. We will
commit file-by-file refactoring to remove the old API in consistent
steps.
with & ok markus@
OpenBSD-Commit-ID: 93c98a6b38f6911fd1ae025a1ec57807fb4d4ef4
ssh->kex and factor out the banner exchange. This eliminates some common code
from the client and server.
Also be more strict about handling \r characters - these should only
be accepted immediately before \n (pointed out by Jann Horn).
Inspired by a patch from Markus Schmidt.
(lots of) feedback and ok markus@
OpenBSD-Commit-ID: 1cc7885487a6754f63641d7d3279b0941890275b
Matches in same pass as "Match canonical" but doesn't require
hostname canonicalisation be enabled. bz#2906 ok markus
OpenBSD-Commit-ID: fba1dfe9f6e0cabcd0e2b3be13f7a434199beffa
Don't call OpenSSL_add_all_algorithms() unless OpenSSL actually
supports it.
Move all libcrypto initialisation to a single function, and call that
from seed_rng() that is called early in each tool's main().
Prompted by patch from Rosen Penev
with a ProxyCommand set with regards to hostname canonicalisation (i.e. don't
try to canonicalise the hostname unless CanonicalizeHostname is set to
'always').
Patch from Sven Wegener via bz#2896
OpenBSD-Commit-ID: 527ff501cf98bf65fb4b29ed0cb847dda10f4d37
original_real_uid and original_effective_uid globals and replace with calls
to plain getuid(). ok djm@
OpenBSD-Commit-ID: 92561c0cd418d34e6841e20ba09160583e27b68c
load_public_identity_files instead of calling getpwuid() again and discarding
the argument. This prevents a client crash where tilde_expand_filename calls
getpwuid() again before the pwent pointer is used. Issue noticed and reported
by Pierre-Olivier Martel <pom@apple.com> ok djm@ deraadt@
OpenBSD-Commit-ID: a067d74b5b098763736c94cc1368de8ea3f0b157
ssh(1) setuid has been removed, remove supporting code and clean up
references to it in the man pages
We have not shipped ssh(1) the setuid bit since 2002. If ayone
really needs to make connections from a low port number this can
be implemented via a small setuid ProxyCommand.
ok markus@ jmc@ djm@
OpenBSD-Commit-ID: d03364610b7123ae4c6792f5274bd147b6de717e
attempted. Do not link uidwap.c into ssh any more. Neuters
UsePrivilegedPort, which will be marked as deprecated shortly. ok markus@
djm@
OpenBSD-Commit-ID: c4ba5bf9c096f57a6ed15b713a1d7e9e2e373c42
but that is now gone and the slot is unused so remove it. Remove two
now-unused macros, and add an array bounds check to the two remaining ones
(array is statically sized, so mostly a safety check on future changes). ok
markus@
OpenBSD-Commit-ID: 2e4c0ca6cc1d8daeccead2aa56192a3f9d5e1e7a
directly in ssh(1) and always use ssh-keysign. This removes one of the few
remaining reasons why ssh(1) might be setuid. ok markus@
OpenBSD-Commit-ID: 97f01e1448707129a20d75f86bad5d27c3cf0b7d
addresses may be listened on when the client requests remote forwarding (ssh
-R).
This is the converse of the existing PermitOpen directive and this
includes some refactoring to share much of its implementation.
feedback and ok markus@
OpenBSD-Commit-ID: 15a931238c61a3f2ac74ea18a98c933e358e277f
username is available currently. In the client this is via %i, in the server
%U (since %i was already used in the client in some places for this, but used
for something different in the server); bz#2870, ok dtucker@
OpenBSD-Commit-ID: c7e912b0213713316cb55db194b3a6415b3d4b95
command-line argument to ssh(1) that directs it to bind its outgoing
connection to the address of the specified network interface.
BindInterface prefers to use addresses that aren't loopback or link-
local, but will fall back to those if no other addresses of the
required family are available on that interface.
Based on patch by Mike Manning in bz#2820, ok dtucker@
OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
The signal handlers from the original ssh1 code on which OpenSSH
is based assume unreliable signals and reinstall their handlers.
Since OpenBSD (and pretty much every current system) has reliable
signals this is not needed. In the unlikely even that -portable
is still being used on such systems we will deal with it in the
compat layer. ok deraadt@
OpenBSD-Commit-ID: f53a1015cb6908431b92116130d285d71589612c
Drop compatibility hacks for some ancient SSH
implementations, including ssh.com <=2.* and OpenSSH <= 3.*.
These versions were all released in or before 2001 and predate the
final SSH RFCs. The hacks in question aren't necessary for RFC-
compliant SSH implementations.
ok markus@
OpenBSD-Commit-ID: 4be81c67db57647f907f4e881fb9341448606138
don't attempt to force hostnames that are addresses to
lowercase, but instead canonicalise them through getnameinfo/getaddrinfo to
remove ambiguities (e.g. ::0001 => ::1) before they are matched against
known_hosts; bz#2763, ok dtucker@
OpenBSD-Commit-ID: ba0863ff087e61e5c65efdbe53be3cb92c9aefa0
fix broken stdout in ControlPersist mode, introduced by me in
r1.467 and reported by Alf Schlichting
OpenBSD-Commit-ID: 3750a16e02108fc25f747e4ebcedb7123c1ef509
transfer ownership of stdout to the session channel by
dup2'ing /dev/null to fd 1. This allows propagation of remote stdout close to
the local side; reported by David Newall, ok markus@
Upstream-ID: 8d9ac18a11d89e6b0415f0cbf67b928ac67f0e79
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
make "--" before the hostname terminate command-line
option processing completely; previous behaviour would not prevent further
options appearing after the hostname (ssh has a supported options after the
hostname for >20 years, so that's too late to change).
ok deraadt@
Upstream-ID: ef5ee50571b98ad94dcdf8282204e877ec88ad89
Add RemoteCommand option to specify a command in the
ssh config file instead of giving it on the client's command line. This
command will be executed on the remote host. The feature allows to automate
tasks using ssh config. OK markus@
Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
deraadt@openbsd.org
djm@openbsd.org
jmc@openbsd.org
otto@openbsd.org
dtucker@openbsd.org
Damien Miller
beck@openbsd.org
markus@openbsd.org
djm@openbsd.org@openbsd.org
millert@openbsd.org
bluhm@openbsd.org