function. This is a no-op on OpenBSD but will make things easier in
-portable, eg on systems where these checks should be case-insensitive. ok
djm@
OpenBSD-Commit-ID: 8bc9c8d98670e23f8eaaaefe29c1f98e7ba0487e
The previous revert enabled case-insensitive user names again. This
patch implements the case-insensitive user and group name matching.
To allow Unicode chars, implement the matcher using wchar_t chars in
Cygwin-specific code. Keep the generic code changes as small as possible.
Cygwin: implement case-insensitive Unicode user and group name matching
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
*ONLY IF* there's a delimiter. If there's not (the common case) it checked
uninitialized memory, which usually passed, but if not would cause spurious
failures when the uninitialized memory happens to contain "/". ok deraadt.
OpenBSD-Commit-ID: 4291611eaf2a53d4c92f4a57c7f267c9f944e0d3
host/port was added in 2001 as an alternative to host:port syntax for
the benefit of IPv6 users. These days there are establised standards
for this like [::1]:22 and the slash syntax is easily mistaken for CIDR
notation, which OpenSSH now supports for some things. Remove the slash
notation from ListenAddress and PermitOpen. bz#2335, patch from jjelen
at redhat.com, ok markus@
OpenBSD-Commit-ID: fae5f4e23c51a368d6b2d98376069ac2b10ad4b7
API, started almost exactly six years ago.
This change stops including the old packet_* API by default and makes
each file that requires the old API include it explicitly. We will
commit file-by-file refactoring to remove the old API in consistent
steps.
with & ok markus@
OpenBSD-Commit-ID: 93c98a6b38f6911fd1ae025a1ec57807fb4d4ef4
loading the default hostkeys. Hostkeys explicitly specified in the
configuration or on the command-line are still reported as errors, and
failure to load at least one host key remains a fatal error.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Based on patch from Dag-Erling Smørgrav via
https://github.com/openssh/openssh-portable/pull/103
ok markus@
OpenBSD-Commit-ID: ffc2e35a75d1008effaf05a5e27425041c27b684
control over which signature algorithms a CA may use when signing
certificates. In particular, this allows a sshd to ban certificates signed
with RSA/SHA1.
ok markus@
OpenBSD-Commit-ID: b05c86ef8b52b913ed48d54a9b9c1a7714d96bac
Most people will 1) be using modern multi-factor authentication methods
like TOTP/OATH etc and 2) be getting support for multi-factor
authentication via PAM or BSD Auth.
It turns out we still support pre-auth compression on the client.
Therefore revert the previous two commits:
date: 2018/07/06 09:06:14; author: sf; commitid: yZVYKIRtUZWD9CmE;
Rename COMP_DELAYED to COMP_ZLIB
Only delayed compression is supported nowadays.
ok markus@
date: 2018/07/06 09:05:01; author: sf; commitid: rEGuT5UgI9f6kddP;
Remove leftovers from pre-authentication compression
Support for this has been removed in 2016.
COMP_DELAYED will be renamed in a later commit.
ok markus@
OpenBSD-Commit-ID: cdfef526357e4e1483c86cf599491b2dafb77772
signature work - returns ability to add/remove/specify algorithms by
wildcard.
Algorithm lists are now fully expanded when the server/client configs
are finalised, so errors are reported early and the config dumps
(e.g. "ssh -G ...") now list the actual algorithms selected.
Clarify that, while wildcards are accepted in algorithm lists, they
aren't full pattern-lists that support negation.
(lots of) feedback, ok markus@
OpenBSD-Commit-ID: a8894c5c81f399a002f02ff4fe6b4fa46b1f3207
pattern-list of whitelisted environment variable names in addition to yes|no.
bz#1800, feedback and ok markus@
OpenBSD-Commit-ID: 77dc2b468e0bf04b53f333434ba257008a1fdf24
e.g.
PermitListen 2222 8080
is equivalent to:
PermitListen *:2222 *:8080
Some bonus manpage improvements, mostly from markus@
"looks fine" markus@
OpenBSD-Commit-ID: 6546b0cc5aab7f53d65ad0a348ca0ae591d6dd24
administrator to explicitly specify environment variables set in sessions
started by sshd. These override the default environment and any variables set
by user configuration (PermitUserEnvironment, etc), but not the SSH_*
variables set by sshd itself.
ok markus@
OpenBSD-Commit-ID: b6a96c0001ccd7dd211df6cae9e961c20fd718c0
addresses may be listened on when the client requests remote forwarding (ssh
-R).
This is the converse of the existing PermitOpen directive and this
includes some refactoring to share much of its implementation.
feedback and ok markus@
OpenBSD-Commit-ID: 15a931238c61a3f2ac74ea18a98c933e358e277f
interactive and CS1 for bulk
AF21 was selected as this is the highest priority within the low-latency
service class (and it is higher than what we have today). SSH is elastic
and time-sensitive data, where a user is waiting for a response via the
network in order to continue with a task at hand. As such, these flows
should be considered foreground traffic, with delays or drops to such
traffic directly impacting user-productivity.
For bulk SSH traffic, the CS1 "Lower Effort" marker was chosen to enable
networks implementing a scavanger/lower-than-best effort class to
discriminate scp(1) below normal activities, such as web surfing. In
general this type of bulk SSH traffic is a background activity.
An advantage of using "AF21" for interactive SSH and "CS1" for bulk SSH
is that they are recognisable values on all common platforms (IANA
https://www.iana.org/assignments/dscp-registry/dscp-registry.xml), and
for AF21 specifically a definition of the intended behavior exists
https://tools.ietf.org/html/rfc4594#section-4.7 in addition to the definition
of the Assured Forwarding PHB group https://tools.ietf.org/html/rfc2597, and
for CS1 (Lower Effort) there is https://tools.ietf.org/html/rfc3662
The first three bits of "AF21" map to the equivalent IEEEE 802.1D PCP, IEEE
802.11e, MPLS EXP/CoS and IP Precedence value of 2 (also known as "Immediate",
or "AC_BE"), and CS1's first 3 bits map to IEEEE 802.1D PCP, IEEE 802.11e,
MPLS/CoS and IP Precedence value 1 ("Background" or "AC_BK").
OK deraadt@, "no objection" djm@
OpenBSD-Commit-ID: d11d2a4484f461524ef0c20870523dfcdeb52181
Remove unused sKerberosTgtPassing from enum. From
calestyo via github pull req #11, ok djm@
OpenBSD-Commit-ID: 1008f8870865a7c4968b7aed402a0a9e3e5b9540
Replace atoi and strtol conversions for integer arguments
to config keywords with a checking wrapper around strtonum. This will
prevent and flag invalid and negative arguments to these keywords. ok djm@
OpenBSD-Commit-ID: 99ae3981f3d608a219ccb8d2fff635ae52c17998
reuse parse_multistate for parse_flag (yes/no arguments).
Saves a few lines of code and makes the parser more consistent wrt case-
sensitivity. bz#2664 ok dtucker@
OpenBSD-Commit-ID: b2ad1b6086858d5db71c7b11e5a74dba6d60efef
When doing a config test with sshd -T, only require the
attributes that are actually used in Match criteria rather than (an
incomplete list of) all criteria. ok djm@, man page help jmc@
OpenBSD-Commit-ID: b4e773c4212d3dea486d0259ae977551aab2c1fc
add a "rdomain" criteria for the sshd_config Match
keyword to allow conditional configuration that depends on which rdomain(4) a
connection was recevied on. ok markus@
Upstream-ID: 27d8fd5a3f1bae18c9c6e533afdf99bff887a4fb
add sshd_config RDomain keyword to place sshd and the
subsequent user session (including the shell and any TCP/IP forwardings) into
the specified rdomain(4)
ok markus@
Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
replace statically-sized arrays in ServerOptions with
dynamic ones managed by xrecallocarray, removing some arbitrary (though
large) limits and saving a bit of memory; "much nicer" markus@
Upstream-ID: 1732720b2f478fe929d6687ac7b0a97ff2efe9d2
fix (another) problem in PermitOpen introduced during the
channels.c refactor: the third and subsequent arguments to PermitOpen were
being silently ignored; ok markus@
Upstream-ID: 067c89f1f53cbc381628012ba776d6861e6782fd
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
refactor authentication logging
optionally record successful auth methods and public credentials
used in a file accessible to user sessions
feedback and ok markus@
Upstream-ID: 090b93036967015717b9a54fd0467875ae9d32fb
Mark the sshd_config UsePrivilegeSeparation option as
deprecated, effectively making privsep mandatory in sandboxing mode. ok
markus@ deraadt@
(note: this doesn't remove the !privsep code paths, though that will
happen eventually).
Upstream-ID: b4c52666256c4dd865f8ce9431af5d6ce2d74a0a
dtucker@openbsd.org
Corinna Vinschen
Darren Tucker
djm@openbsd.org
Damien Miller
markus@openbsd.org
sf@openbsd.org
job@openbsd.org
djm@openbsd.org@openbsd.org
dtucker@openbsd.org@openbsd.org
jsg@openbsd.org