audk/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c

261 lines
9.8 KiB
C
Raw Normal View History

/** @file
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
Copyright (c) 2011, ARM Limited. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Base.h>
#include <Library/BaseLib.h>
#include <Library/TimerLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Library/IoLib.h>
#include <Drivers/SP804Timer.h>
#define SP804_TIMER_METRONOME_BASE ((UINTN)PcdGet32 (PcdSP804TimerMetronomeBase))
#define SP804_TIMER_PERFORMANCE_BASE ((UINTN)PcdGet32 (PcdSP804TimerPerformanceBase))
// Setup SP810's Timer2 for managing delay functions. And Timer3 for Performance counter
// Note: ArmVE's Timer0 and Timer1 are used by TimerDxe.
RETURN_STATUS
EFIAPI
TimerConstructor (
VOID
)
{
// Check if the Metronome Timer is already initialized
if (MmioRead32(SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
return RETURN_SUCCESS;
} else {
// Configure the Metronome Timer for free running operation, 32 bits, no prescaler, and interrupt disabled
MmioWrite32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
// Start the Metronome Timer ticking
MmioOr32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
}
// Check if the Performance Timer is already initialized
if (MmioRead32(SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
return RETURN_SUCCESS;
} else {
// Configure the Performance timer for free running operation, 32 bits, no prescaler, interrupt disabled
MmioWrite32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
// Start the Performance Timer ticking
MmioOr32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
}
return RETURN_SUCCESS;
}
/**
Stalls the CPU for at least the given number of microseconds.
Stalls the CPU for the number of microseconds specified by MicroSeconds.
The hardware timer is 32 bits.
The maximum possible delay is (0xFFFFFFFF / TimerFrequencyMHz), i.e. ([32bits] / FreqInMHz)
For example:
+----------------+------------+----------+----------+
| TimerFrequency | MaxDelay | MaxDelay | MaxDelay |
| (MHz) | (us) | (s) | (min) |
+----------------+------------+----------+----------+
| 1 | 0xFFFFFFFF | 4294 | 71.5 |
| 5 | 0x33333333 | 859 | 14.3 |
| 10 | 0x19999999 | 429 | 7.2 |
| 50 | 0x051EB851 | 86 | 1.4 |
+----------------+------------+----------+----------+
If it becomes necessary to support higher delays, then consider using the
real time clock.
During this delay, the cpu is not yielded to any other process, with one exception:
events that are triggered off a timer and which execute at a higher TPL than
this function. These events may call MicroSecondDelay (or NanoSecondDelay) to
fulfil their own needs.
Therefore, this function must be re-entrant, as it may be interrupted and re-started.
@param MicroSeconds The minimum number of microseconds to delay.
@return The value of MicroSeconds inputted.
**/
UINTN
EFIAPI
MicroSecondDelay (
IN UINTN MicroSeconds
)
{
UINT64 DelayTicks64; // Convert from microseconds to timer ticks, more bits to detect over-range conditions.
UINTN DelayTicks; // Convert from microseconds to timer ticks, native size for general calculations.
UINTN StartTicks; // Timer value snapshot at the start of the delay
UINTN TargetTicks; // Timer value to signal the end of the delay
UINTN CurrentTicks; // Current value of the 64-bit timer value at any given moment
// If we snapshot the timer at the start of the delay function then we minimise unaccounted overheads.
StartTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
// We are operating at the limit of 32bits. For the range checking work in 64 bits to avoid overflows.
DelayTicks64 = MultU64x32((UINT64)MicroSeconds, PcdGet32(PcdSP804TimerFrequencyInMHz));
// We are limited to 32 bits.
// If the specified delay is exactly equal to the max range of the timer,
// then the start will be equal to the stop plus one timer overflow (wrap-around).
// To avoid having to check for that, reduce the maximum acceptable range by 1 tick,
// i.e. reject delays equal or greater than the max range of the timer.
if (DelayTicks64 >= (UINT64)SP804_MAX_TICKS) {
DEBUG((EFI_D_ERROR,"MicroSecondDelay: ERROR: MicroSeconds=%d exceed SP804 count range. Max MicroSeconds=%d\n",
MicroSeconds,
((UINTN)SP804_MAX_TICKS/PcdGet32(PcdSP804TimerFrequencyInMHz))));
}
ASSERT(DelayTicks64 < (UINT64)SP804_MAX_TICKS);
// From now on do calculations only in native bit size.
DelayTicks = (UINTN)DelayTicks64;
// Calculate the target value of the timer.
//Note: SP804 timer is counting down
if (StartTicks >= DelayTicks) {
// In this case we do not expect a wrap-around of the timer to occur.
// CurrentTicks must be less than StartTicks and higher than TargetTicks.
// If this is not the case, then the delay has been reached and may even have been exceeded if this
// function was suspended by a higher priority interrupt.
TargetTicks = StartTicks - DelayTicks;
do {
CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
} while ((CurrentTicks > TargetTicks) && (CurrentTicks <= StartTicks));
} else {
// In this case TargetTicks is larger than StartTicks.
// This means we expect a wrap-around of the timer to occur and we must wait for it.
// Before the wrap-around, CurrentTicks must be less than StartTicks and less than TargetTicks.
// After the wrap-around, CurrentTicks must be larger than StartTicks and larger than TargetTicks.
// If this is not the case, then the delay has been reached and may even have been exceeded if this
// function was suspended by a higher priority interrupt.
// The order of operations is essential to avoid arithmetic overflow problems
TargetTicks = ((UINTN)SP804_MAX_TICKS - DelayTicks) + StartTicks;
// First wait for the wrap-around to occur
do {
CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
} while (CurrentTicks <= StartTicks);
// Then wait for the target
do {
CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG);
} while (CurrentTicks > TargetTicks);
}
return MicroSeconds;
}
/**
Stalls the CPU for at least the given number of nanoseconds.
Stalls the CPU for the number of nanoseconds specified by NanoSeconds.
When the timer frequency is 1MHz, each tick corresponds to 1 microsecond.
Therefore, the nanosecond delay will be rounded up to the nearest 1 microsecond.
@param NanoSeconds The minimum number of nanoseconds to delay.
@return The value of NanoSeconds inputted.
**/
UINTN
EFIAPI
NanoSecondDelay (
IN UINTN NanoSeconds
)
{
UINTN MicroSeconds;
// Round up to 1us Tick Number
MicroSeconds = NanoSeconds / 1000;
MicroSeconds += ((NanoSeconds % 1000) == 0) ? 0 : 1;
MicroSecondDelay (MicroSeconds);
return NanoSeconds;
}
/**
Retrieves the current value of a 64-bit free running performance counter.
The counter can either count up by 1 or count down by 1. If the physical
performance counter counts by a larger increment, then the counter values
must be translated. The properties of the counter can be retrieved from
GetPerformanceCounterProperties().
@return The current value of the free running performance counter.
**/
UINT64
EFIAPI
GetPerformanceCounter (
VOID
)
{
// Free running 64-bit/32-bit counter is needed here.
// Don't think we need this to boot, just to do performance profile
UINT64 Value;
Value = MmioRead32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CURRENT_REG);
return Value;
}
/**
Retrieves the 64-bit frequency in Hz and the range of performance counter
values.
If StartValue is not NULL, then the value that the performance counter starts
with immediately after is it rolls over is returned in StartValue. If
EndValue is not NULL, then the value that the performance counter end with
immediately before it rolls over is returned in EndValue. The 64-bit
frequency of the performance counter in Hz is always returned. If StartValue
is less than EndValue, then the performance counter counts up. If StartValue
is greater than EndValue, then the performance counter counts down. For
example, a 64-bit free running counter that counts up would have a StartValue
of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter
that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.
@param StartValue The value the performance counter starts with when it
rolls over.
@param EndValue The value that the performance counter ends with before
it rolls over.
@return The frequency in Hz.
**/
UINT64
EFIAPI
GetPerformanceCounterProperties (
OUT UINT64 *StartValue, OPTIONAL
OUT UINT64 *EndValue OPTIONAL
)
{
if (StartValue != NULL) {
// Timer starts with the reload value
*StartValue = 0xFFFFFFFF;
}
if (EndValue != NULL) {
// Timer counts down to 0x0
*EndValue = (UINT64)0ULL;
}
return PcdGet64 (PcdEmbeddedPerformanceCounterFrequencyInHz);
}