Current code will generate duplicate UID if there are nested processor
containers in the topology. For example if there is a
socket/cluster/core layout.
Change references to processor container from cluster to be more
accurate on what is being created.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add APIs needed to build _DSD with different UUIDs.
This is per ACPI specification 6.4 s6.2.5.
Adds support for building data packages with format
Package {"Name", Integer}
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3998
Certain OSes will complain if the ECAM config space is not reserved in
the ACPI namespace.
This change adds a function to reserve PNP motherboard resources for a
given PCI node.
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3997
This change added an extra step to allow check for installed ACPI tables.
For FADT, MADT, GTDT, DSDT, DBG2 and SPCR tables, either pre-installed or
supplied through AcpiTableInfo can be accepted.
An extra check for FADT ACPI table existence during installation step is
also added.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@Arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3996
This change added more token fixers for other node types, including
NamedComponentNode, RootComplexNode, and SmmuV3Node.
The corresponding entries for tokenFixer functions table is also updated.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3996
The content of token should be derived from the data section of the
`CmObject` instead of the object itself.
This change fixed the issue by dereferencing the token value from the
data buffer of input CmObject.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3996
The DynamicPlatRepoLib has multiple reference to MemoryAllocationLib,
such as DynamicPlatRepo.c and TokenMapper.c. Not including it in the
library inf file could lead to potential build break.
This change added the MemoryAllocationLib into this inf file.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Fix using RmrNodeCount uninitliased by initliasing it to zero. Also, add
an additional check for ACPI version. This fixes a crash running on
kvmtool.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT generator to:
- increment IORT table revision count to 5.
- populate Identifier filed if revision is greater than 4.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.
- Populate the PASID capabilities and Flags field of the
Root complex node.
- Added checks to not generate IORT Rev E, Rev E.<a,b,c>.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the Arm namespace objects to:
- add Identifier field to IORT nodes.
- introduce enums to represent RMR nodes and Memory Range
descriptors.
- add definition of node type 6 - Reserved Memory Range node.
- add definition for Memory Range Descriptors.
- add PASID capabilities and flags field to Root Complex node.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT header file to reflect these changes,
and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
EFI_ACPI_IO_REMAPPING_TABLE_REVISION_00.
Also update the IORT generator in DynamicTablesPkg to fix the
compilation errors so that Git Bisect can work.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The IORT generator is populating the reference field for Context and
PMU interrupts even if their count is zero.
Update the IORT generator to set the references only if the interrupt
count is not 0. Also add checks to ensure a valid reference token has
been provided.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IORT table generator is setting up a reference to ID array for
nodes even when the ID Mapping count is zero. This is not an issue as an
OS would only access the ID Reference if the ID mapping count is not zero.
However, it would be good to set the reference to ID array to zero when
the ID Mapping count is zero rather than populating it with an incorrect
value.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add error handling when the IdMappingCount is not zero and the
IdMappingToken is NULL.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add support library to allow for customization of _OSC and slot info.
The functions in the library are unchanged,
with the exception of adding PciInfo pointer to the APIs.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for PCIe devices with UID > 0xF.
This is done by using the next value in the name so
PCI5, PC26, etc
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The translation value in ACPI should be the difference between the CPU and PCIe address.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
SSDT tables describing an SBSA compatible serial port receive an '_HID'
value of 'ARMH0011'. This value represents a PL011 serial port.
This patch:
- Generates an 'ARMHB000' instead
- References the 'ACPI for Arm Components 1.0 - 2020' document
specifying the '_HID' values to use.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Device Tree PCI interrupt flags use the convention described at
linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = low-to-high edge triggered
2 = high-to-low edge triggered (invalid for SPIs)
4 = active high level-sensitive
8 = active low level-sensitive (invalid for SPIs).
Fix the incorrect code.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The CM_STD_OBJ_ACPI_TABLE_INFO.AcpiTableRevision can be used to specify
the major revision number of the ACPI table that the generator must use.
Although most ACPI tables only have a major revision number, the FADT
table additionally has a minor revision number.
The FADT generator currently defaults to setting the latest supported
ACPI revision for the FADT table i.e. ACPI 6.4. This means that the minor
revision for the FADT table is always set to 4 and there is no provision
for a user to specify the minor revision to be selected.
Therefore, update CM_STD_OBJ_ACPI_TABLE_INFO to introduce a new field
MinorRevision which can be used to specify the minor revision for an
ACPI table. Also update the FADT generator to validate the supported
FADT revisions ans use the specified minor revision for the FADT table
if supported. If an unsupported minor revision is specified the FADT
generator defaults to the latest supported minor revision.
Since the CM_STD_OBJ_ACPI_TABLE_INFO.MinorRevision field is added to
the end of the structure, it should not break existing platform code.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
According to the Debug Port Table 2 (DBG2) specification,
February 17, 2021, the NamespaceString is a NULL terminated
ASCII string that consists of a fully qualified reference
to the object that represents the serial port device in the
ACPI namespace.
The DBG2 table generator did not populate the full device
path for the serial port device, and this results in a FWTS
test failure.
Therefore, populate the full namespace device path for the
serial port in DBG2 table.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
Tested-by: Sunny Wang <sunny.wang@arm.com>
Add AmlCodeGenMethodRetInteger function to generate AML code for
a Method returning an Integer.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In AmlCodeGenReturn, the cast to AML_NODE_HEADER* in the call to
AmlSetFixedArgument is redundant because ReturnNode is already a
AML_NODE_HEADER* .
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add a Memory32Fixed function to generate code for the corresponding
Memory32Fixed macro in AML.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In ACPI 6.4, s6.2.13, _PRT objects describing PCI legacy interrupts
can be defined following 2 models.
In the first model, _PRT entries reference link devices. Link devices
then describe interrupts. This allows to dynamically modify
interrupts through _SRS and _PRS objects and to choose exactly the
interrupt type (level/edge triggered, active high/low).
In the second model, interrupt numbder are described in the _PRT entry.
The interrupt type is then assumed by the OS.
The Arm BSA, sE.6 "Legacy interrupts" states that PCI legacy
interrupts must be converted to SPIs, and programmed level-sensitive,
active high. Thus any OS must configure interrupts as such and there
is no need to specify the interrupt type.
Plus it is not possible to dynamically configure PCI interrupts.
Thus remove the link device generation and use the second model
for _PRT.
Suggested-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
In ACPI 6.4, s6.2.13, _PRT objects describing PCI legacy interrupts
can be defined following 2 models.
In the first model, _PRT entries reference link devices. Link devices
then describe interrupts. This allows to dynamically modify
interrupts through _SRS and _PRS objects and to choose exactly the
interrupt type (level/edge triggered, active high/low).
In the second model, interrupt numbers are described in the _PRT entry.
The interrupt type is then assumed by the OS.
AmlAddPrtEntry() currently only handles the first model. Make
changes to also handle the second model.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Parse the Pmu interrupts if a pmu compatible node is present,
and populate the MADT GicC structure accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add a macro that specifies the format for printing CM_OBJECT_ID.
This allows to print the CM_OBJECT_ID is a consistent way in the
output logs.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the inf file of the module and the main module
functionnalities and update the dsc file of the package.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the TokenMapper files, allowing to retrieve a CmObj
from a token/CmObjId couple.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the TokenFixer files, allowing to update the
self-token some CmObj have.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the TokenGenerator files.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepoLib library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to
retrieve dynamic CmObjs among all CmObj (static CmObj for instance).
This patch defines the library interface of the DynamicPlatRepo.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Handle the EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_16550_WITH_GAS
id when generating an AML description of a serial port. The same
_HID/_CID as the EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_FULL_16550
are generated.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Hardware information parser is an optional module defined
by the Dynamic Tables Framework. It can either parse an
XML, a Device Tree or a Json file containing the platform
hardware information to populate the platform information
repository.
FdtHwInfoParser library is an instance of a HwInfoParser
that parses a Device Tree and populates the Configuration
Manager Platform information repository.
FdtHwInfoParser library is aimed at providing a solution
for generating ACPI tables for Guest Partitions launched
by virtual machine managers (VMMs). One such use case is
Kvmtool where the Device Tree for the Guest is passed on
to the firmware by Kvmtool. The Configuration Manager for
Kvmtool firmware shall invoke the FdtHwInfoParser to parse
the Device Tree to populate the hardware information in
the Platform Info Repository. The Kvmtool Configuration
Manager can the process this information to generate the
required ACPI tables for the Guest VM.
This approach also scales well if the number of CPUs or
if the hardware configuration of the Guest partition is
varied.
FdtHwInfoParser thereby introduces 'Dynamic Tables for
Virtual Machines'.
Ref:https://bugzilla.tianocore.org/show_bug.cgi?id=3741
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
On platforms that implement PCIe, the PCIe configuration space
information must be described to a standards-based operating
system in the Memory mapped configuration space base address
Description (MCFG) table.
The PCIe information is described in the platform Device Tree,
the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/pci/
host-generic-pci.yaml
The FdtHwInfoParser implements a PCI configuration space Parser
that parses the platform Device Tree to create
CM_ARM_PCI_CONFIG_SPACE_INFO objects which are encapsulated in a
Configuration Manager descriptor object and added to the platform
information repository.
The platform Configuration Manager can then utilise this
information when generating the MCFG table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The GIC Dispatcher is the top-level component that is responsible
for invoking the respective parsers for GICC, GICD, GIC MSI Frame,
GIC ITS and the GICR.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The GIC Redistributor (GICR) structure is part of the Multiple
APIC Description Table (MADT) that enables the discovery of
GIC Redistributor base addresses by providing the Physical Base
Address of a page range containing the GIC Redistributors. More
than one GICR Structure may be presented in the MADT. The GICR
structures should only be used when describing GIC version 3 or
higher.
The GIC Redistributor information is described in the platform
Device Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC Redistributor Parser that
parses the platform Device Tree to create CM_ARM_GIC_REDIST_INFO
objects which are encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Arm GIC v3/v4 optionally includes support for GIC Interrupt
Translation Service (ITS). The GIC ITS Structure is part of
the Multiple APIC Description Table (MADT) that describes
the GIC Interrupt Translation service to the OS.
The GIC Interrupt Translation Service information is described
in the platform Device Tree, the bindings for which can be
found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC ITS Parser that parses the
platform Device Tree to create CM_ARM_GIC_ITS_INFO objects which
are encapsulated in a Configuration Manager descriptor object and
added to the platform information repository.
The platform Configuration Manager can then utilise this information
when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Arm GIC version 2 systems that support Message Signalled Interrupts
implement GICv2m MSI frame(s). Each GICv2m MSI frame consists of a
4k page which includes registers to generate message signalled
interrupts to an associated GIC distributor. The frame also includes
registers to discover the set of distributor lines which may be
signalled by MSIs from that frame. A system may have multiple MSI
frames, and separate frames may be defined for secure and non-secure
access.
A MSI Frame structure is part of the Multiple APIC Description Table
(MADT) and must only be used to describe non-secure MSI frames.
The MSI Frame information is described in the platform Device Tree,
the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a MSI Frame Parser that parses
the platform Device Tree to create CM_ARM_GIC_MSI_FRAME_INFO
objects which are encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
On ARM-based systems the Generic Interrupt Controller (GIC)
manages interrupts on the system. Each interrupt is identified
in the GIC by an interrupt identifier (INTID). ACPI GSIVs map
one to one to GIC INTIDs for peripheral interrupts, whether
shared (SPI) or private (PPI). The GIC distributor provides
the routing configuration for the interrupts.
The GIC Distributor (GICD) structure is part of the Multiple
APIC Description Table (MADT) that describes the GIC
distributor to the OS. The MADT table is a mandatory table
required for booting a standards-based operating system.
The GIC Distributor information is described in the platform
Device Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC Distributor Parser that
parses the platform Device Tree to create CM_ARM_GICD_INFO
object which is encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The GIC CPU Interface (GICC) structure is part of the Multiple
APIC Description Table (MADT) that describes the interrupt model
for the platform. The MADT table is a mandatory table required
for booting a standards-based operating system.
Arm requires the GIC interrupt model, in which the logical
processors are required to have a Processor Device object in
the DSDT, and must convey each processor's GIC information to
the OS using the GICC structure.
The CPU and GIC information is described in the platform Device
Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/arm/cpus.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC CPU Interface Parser that
parses the platform Device Tree to create CM_ARM_GICC_INFO
objects which are encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT and the SSDT CPU
information tables.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Microsoft Debug Port Table 2 (DBG2), the Serial Port Console
Redirector (SPCR) table are mandatory tables required for booting
a standards-based operating system. The DBG2 table is used by the
OS debugger while the SPCR table is used to configure the serial
terminal. Additionally, the serial ports available on a platform
for generic use also need to be described in DSDT/SSDT for an OS
to be able to use the serial ports.
The Arm Base System Architecture 1.0 specification a lists of
supported serial port hardware for Arm Platforms. This list
includes the following serial port UARTs:
- SBSA/Generic UART
- a fully 16550 compatible UART.
Along, with these the PL011 UART is the most commonly used serial
port hardware on Arm platforms.
The serial port hardware information is described in the platform
Device Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/serial/serial.yaml
- linux/Documentation/devicetree/bindings/serial/8250.txt
- linux/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
- linux/Documentation/devicetree/bindings/serial/pl011.yaml
The FdtHwInfoParser implements a Serial Port Parser that parses
the platform Device Tree to create CM_ARM_SERIAL_PORT_INFO objects
with the following IDs:
- EArmObjSerialConsolePortInfo (for use by SPCR)
- EArmObjSerialDebugPortInfo (for use by DBG2)
- EArmObjSerialPortInfo (for use as generic Serial Ports)
The Serial Port for use by SPCR is selected by parsing the Device
Tree for the '/chosen' node with the 'stdout-path' property. The
next Serial Port is selected for use as the Debug Serial Port and
the remaining serial ports are used as generic serial ports.
The CM_ARM_SERIAL_PORT_INFO objects are encapsulated in Configuration
Manager descriptor objects with the respective IDs and are added to
the platform information repository.
The platform Configuration Manager can then utilise this information
when generating the DBG2, SPCR and the SSDT serial port tables.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Generic Timer Description Table (GTDT) is a mandatory table
required for booting a standards-based operating system. It
provides an OSPM with information about a system's Generic Timer
configuration. The Generic Timer (GT) is a standard timer interface
implemented on ARM processor-based systems. The GTDT provides OSPM
with information about a system's GT interrupt configurations, for
both per-processor timers, and platform (memory-mapped) timers.
The Generic Timer information is described in the platform Device
Tree. The Device Tree bindings for the Generic timers can be found
at:
- linux/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
The FdtHwInfoParser implements a Generic Timer Parser that parses
the platform Device Tree to create a CM_ARM_GENERIC_TIMER_INFO
object. The CM_ARM_GENERIC_TIMER_INFO object is encapsulated in a
Configuration Manager descriptor object and added to the platform
information repository.
The platform Configuration Manager can then utilise this information
when generating the GTDT table.
Note: The Generic Timer Parser currently does not support parsing
of memory-mapped platform timers.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Fixed ACPI Description Table (FADT) is a mandatory table
required for booting a standards-based operating system. The
FADT table has an 'ARM Boot Architecture Flags' field that is
used by an OS at boot time to determine the code path during
boot. This field is used to specify if the platform complies
with the PSCI specification. It is also used to describe the
conduit (SMC/HVC) to be used for PSCI.
The PSCI compliance information for a platform is described
in the platform Device Tree, the bindings for which can be
found at:
- linux/Documentation/devicetree/bindings/arm/psci.yaml
The FdtHwInfoParser implements a Boot Arch Parser that parses
the platform Device Tree to create a CM_ARM_BOOT_ARCH_INFO
object. The CM_ARM_BOOT_ARCH_INFO object is encapsulated in
a Configuration Manager descriptor object and added to the
platform information repository.
The platform Configuration Manager can then utilise this
information when generating the FADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The FdtHwInfoParser parses a platform Device Tree and populates
the Platform Information repository with Configuration Manager
objects.
Therefore, add a set of helper functions to simplify parsing of
the platform Device Tree.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
FdtHwInfoParserLib is an instance of the HwInfoParser. The
FdtHwInfoParser parses a platform Device Tree and populates
the Platform Information repository with Configuration
Manager objects that describe the platform hardware.
These Configuration Manager objects are encapsulated in
Configuration Manager Object Descriptors.
Therefore, add helper functions to create and free the
Configuration Manager Object descriptors.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Hardware information parser is an optional module defined
by the Dynamic Tables Framework. It can either parse an
XML, a Device Tree or a Json file containing the platform
hardware information to populate the platform information
repository.
The Configuration Manager can then utilise this information
to generate ACPI tables for the platform.
Therefore, define an interface for the HwInfoParser library
class.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
When a CmObjDesc contains multiple objects, only the first one is
parsed as the buffer doesn't progress. Fix this.
Also check that the whole buffer has been parsed with an asset.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This generator allows to generate a SSDT table describing
a Pci express Bus. It uses the following CmObj:
- EArmObjCmRef
- EArmObjPciConfigSpaceInfo
- EArmObjPciAddressMapInfo
- EArmObjPciInterruptMapInfo
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3682
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Introduce the following CmObj in the ArmNameSpaceObjects:
- CM_ARM_PCI_ADDRESS_MAP_INFO
- CM_ARM_PCI_INTERRUPT_MAP_INFO
These objects allow to describe address range mapping
of Pci busses and interrupt mapping of Pci devices.
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This function allows to add a node as the last node of a parent node
in an AML tree. For instance,
ASL code corresponding to NewNode:
Name (_UID, 0)
ASL code corresponding to ParentNode:
Device (PCI0) {
Name(_HID, EISAID("PNP0A08"))
}
"AmlAttachNode (ParentNode, NewNode)" will result in:
ASL code:
Device (PCI0) {
Name(_HID, EISAID("PNP0A08"))
Name (_UID, 0)
}
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
_PRT entries can describe interrupt mapping for Pci devices. The
object is described in ACPI 6.4 s6.2.13 "_PRT (PCI Routing Table)".
Add AmlCodeGenPrtEntry() helper function to add _PRT entries
to an existing _PRT object.
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add AmlCodeGenNameResourceTemplate() to generate code for a
ResourceTemplate().
AmlCodeGenNameResourceTemplate ("REST", ParentNode, NewObjectNode) is
equivalent of the following ASL code:
Name(REST, ResourceTemplate () {})
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add AmlCodeGenNamePackage() to generate code for a Package().
AmlCodeGenNamePackage ("PACK", ParentNode, NewObjectNode) is
equivalent of the following ASL code:
Name(PACK, Package () {})
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add helper functions to generate AML Resource Data describing memory
ranges. Memory ranges can be one, double or four words long. They
can be of 'normal', IO or bus number memory type. The following
APIs are exposed:
- AmlCodeGenRdDWordIo ()
- AmlCodeGenRdDWordMemory ()
- AmlCodeGenRdWordBusNumber ()
- AmlCodeGenRdQWordMemory ()
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the PPTT generator with the CacheId field as defined in table
5.140 of the ACPI 6.4 specification.
Also add validations to ensure that the cache id generated is unique.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the PPTT generator to use Acpi64.h.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
ACPI 6.3A deprecated PPTT ID (type 2) structure which was subsequently
removed in ACPI 6.4. Therefore remove support for generating PPTT ID
structures.
Mantis ID for removing PPTT type 2 structure:
2072 (https://mantis.uefi.org/mantis/view.php?id=2072)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the DynamicTablesPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Fix ARM and AARCH64 build issues by adding the BaseStackCheckLib
instance.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Building the DynamicTablesPkg with the additional
-Wpointer-arith flag triggers the following error:
"pointer of type ‘void *’ used in arithmetic
[-Werror=pointer-arith]"
Cast the void pointer to fix the error.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In the success case we should return EFI_SUCCESS rather than returning
a potentially unitialized value of Status.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Moritz Fischer <moritzf@google.com>
In the GIC interrupt model, logical processors are required to
have a Processor Device object in the DSDT and must convey each
processor's GIC information to the OS using the GICC structure.
Additionally, _LPI objects may be needed as they provide a method
to describe Low Power Idle states that defines the local power
states for each node in a hierarchical processor topology.
Therefore, add support to generate the CPU topology and the LPI
state information in an SSDT table.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Introduce the CM_ARM_LPI_INFO CmObj in the ArmNameSpaceObjects.
This allows to describe LPI state information, as described in
ACPI 6.4, s8.4.4.3 "_LPI (Low Power Idle States)".
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlAddLpiState() to generates AML code to add an _LPI state
to an _LPI object created using AmlCreateLpiNode().
AmlAddLpiState increments the count of LPI states in the LPI
node by one, and adds the following package:
Package() {
MinResidency,
WorstCaseWakeLatency,
Flags,
ArchFlags,
ResCntFreq,
EnableParentState,
(GenericRegisterDescriptor != NULL) ? // Entry method. If a
ResourceTemplate(GenericRegisterDescriptor) : // Register is given,
Integer, // use it. Use the
// Integer otherwise
ResourceTemplate() { // NULL Residency
Register (SystemMemory, 0, 0, 0, 0) // Counter
},
ResourceTemplate() { // NULL Usage Counter
Register (SystemMemory, 0, 0, 0, 0)
},
"" // NULL State Name
},
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
_LPI object provides a method to describe Low Power Idle
states that define the local power states for each node
in a hierarchical processor topology.
Therefore, add AmlCreateLpiNode() to generate code for a
_LPI object.
AmlCreateLpiNode ("_LPI", 0, 1, ParentNode, &LpiNode) is
equivalent of the following ASL code:
Name (_LPI, Package (
0, // Revision
1, // LevelId
0 // Count
))
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenMethodRetNameString() to generate AML code to create
a Method returning a NameString (NS).
AmlCodeGenMethodRetNameString (
"MET0", "_CRS", 1, TRUE, 3, ParentNode, NewObjectNode
);
is equivalent of the following ASL code:
Method(MET0, 1, Serialized, 3) {
Return (_CRS)
}
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenReturnNameString() to generate AML code for a
Return object node, returning the object as a NameString.
AmlCodeGenReturn ("NAM1", ParentNode, NewObjectNode) is
equivalent of the following ASL code:
Return(NAM1)
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenMethod() to generate code for a control method.
AmlCodeGenMethod ("MET0", 1, TRUE, 3, ParentNode, NewObjectNode)
is equivalent of the following ASL code:
Method(MET0, 1, Serialized, 3) {}
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ASL provides a ResourceTemplate macro that creates a Buffer in which
resource descriptor macros can be listed. The ResourceTemplate macro
automatically generates an End descriptor and calculates the checksum
for the resource template.
Therefore, add AmlCodeGenResourceTemplate() to generate AML code for
the ResourceTemplate() macro. This function generates a Buffer node
with an EndTag resource data descriptor, which is similar to the ASL
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some AML object have a PkgLen which indicates the size of the
AML object. The package length can be encoded in 1 to 4 bytes.
The bytes used to encode the PkgLen is itself counted in the
PkgLen value. So, if an AML object's size increments/decrements,
the number of bytes used to encode the PkgLen value can itself
increment/decrement.
Therefore, a helper function AmlComputePkgLength() is introduced
to simply computation of the PkgLen.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenPackage() to generate AML code for declaring
a Package() object. This function generates an empty package
node. New elements can then be added to the package's variable
argument list.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a helper function AmlCodeGenEndTag() to generate AML Resource Data
EndTag. The EndTag resource data is automatically generated by the ASL
compiler at the end of a list of resource data elements. Therefore, an
equivalent function is not present in ASL.
However, AmlCodeGenEndTag() is useful when generating AML code for the
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenRegister() to generate AML code for the
Generic Register Resource Descriptor. This function is
equivalent to the ASL macro Register().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Remove the STATIC qualifier for the AmlUtility function
AmlNodeGetIntegerValue() and add the definition to the
header file so that it can be used by other AmlLib
sub-modules.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The node creation functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
are now resetting the input pointer where the created node is stored.
Thus, it is not necessary to set some local variables to NULL or
check a node value before trying to delete it.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The following functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
create a node and return it by populating a pointer. This pointer
should only be considered/used if the function returns successfully.
Otherwise, the value stored in this pointer should be ignored.
For their error handling, some other functions assume that this
pointer is reset to NULL if an error occurs during a node creation.
To make this assumption correct, explicitly clear this input pointer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
To avoid re-computing checksums, if a new resource data elements is
added/removed/modified in a list of resource data elements, the AmlLib
resets the checksum to 0.
This patch also refactors the AmlAppendRdNode() function by getting the
last Resource Data node directly instead of iterating over all the
elements of the list of Resource Data node.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Lists of Resource Data elements end with an EndTag (most of the time).
This function finds the EndTag (if present) in a list of Resource Data
elements and sets the checksum.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlRdSetEndTagChecksum(), setting the CheckSum value contained in a
Resource Data element.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the
data bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
To fetch the Oem information from the ConfigurationManagerProtocol
and the AcpiTableInfo, and populate the SSDT ACPI header when
creating a RootNode via the AmlLib, create AddSsdtAcpiHeader().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add missing check of 'AcpiTableInfo' in AddAcpiHeader().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Buzilla: 3565 (https://bugzilla.tianocore.org/show_bug.cgi?id=3565)
As part of the updates to ACPI 6.4 the "SBSA Generic Watchdog" was
renamed to the "Arm Generic Watchdog". This patch implements that
change by updating the GTDT generator to use Acpi64.h and renames
any occurence of "SBSA Generic Watchdog" to "Arm Generic Watchdog".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Rework all the functions to to have a generic prototype:
- First take take the resource data specific arguments.
E.g.: for a Register(): the AddressSpace, BitWidth, ...
- The penultimate parameter is a NameOpNode. The resource data
created is appended to the ResourceTemplate() contained in the
NameOpNode.
- The last parameter is a pointer holding the created resource data.
A least one of the two last parameter must be provided. One of them can
be omitted. This generic interface allows to either:
- Add the resource data to a NameOpNode. This is a common case for the
Ssdt tables generator.
- Get the created resource data and let the caller place it in an AML
tree.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some functions in the AmlLib have 'Crs' in their name and can only
be applied to '_CRS' AML objects. To re-use them on AML objects that
have different names:
- Rename them and remove the '_CRS' name check.
- Create aliases having of the 'Crs' function prototypes. These
aliases are available when DISABLE_NEW_DEPRECATED_INTERFACES
is not defined. They will be deprecated in a near future.
The deprecated functions are:
- AmlNameOpCrsGetFirstRdNode()
- AmlNameOpCrsGetNextRdNode()
- AmlCodeGenCrsAddRdInterrupt()
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
To prepare edk2 upstream CI for incoming modifications:
1- Disable the Ecc check 9005:
"Only Doxygen commands '@bug', '@todo', [...], '@{', '@}'
are allowed to mark the code Unknown doxygen command [...]"
2- Disable the Ecc check 8003 for the following keyword:
"DISABLE_NEW_DEPRECATED_INTERFACES"
Indeed, this error has been corrected on the latest version of
BaseTools, but is still triggered when using the older python
packages containing the BaseTools.
3- Add word exceptions for the cspell tool.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The correct formatter to print a CHAR8 char in edk2 is '%a'.
Replace the '%s' formatters by '%a'.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Platform information repository in the Configuration Manager
may be dynamically populated, for e.g. by a Hardware Information
Parser like FdtHwInfoParser. In such cases it is useful to trace
the CM objects that were populated by the parser.
Therefore, introduce helper functions that can parse and trace
the Configuration Manager Objects.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a function converting a 7 characters string to its UINT32
EISAID. The algorithm used to create the EISAID is described
in the ACPI 6.4 specification, s19.3.4 "ASL Macros".
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add HexFromAscii(), converting an hexadecimal ascii char
to an integer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Ecc tool forbids the usage of one char variable: Ecc error 8007:
"There should be no use of short (single character) variable names"
To follow this policy, rename this one letter parameter.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Update the inf file version and BASE_NAME of the library.
Remove unused sections.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The TableHelperLib contains helper functions. Some rely on
DynamicTablesPkg definitions (they use Configuration Manager objects).
Some others are more generic.
To allow using these generic functions without including
DynamicTablesPkg definitions, move them to a new AcpiHelperLib
library.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Use the newly introduced defined value in:
MdePkg/Include/IndustryStandard/AcpiAml.h
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Jeff Brasen
Kun Qin
Edward Pickup
Sami Mujawar
Pierre Gondois
Rebecca Cran
Chris Jones
Michael Kubacki
Michael D Kinney
Moritz Fischer