Note: this must be combined with flag /wd4324 added to MSFT:*_CC_FLAGS
to avoid spurious warnings when the macro is working as intended.
Update comment since alignment in all architectures can be used to align
structure member or variable definition.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3704
build -a X64 -t CLANG38 -b RELEASE -p OvmfPkg/OvmfPkgX64.dsc
results in
UDK/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c:1284:31:
error: variable 'Status' set but not used
[-Werror,-Wunused-but-set-variable]
Signed-off-by: Mikhail Krichanov <krichanov@ispras.ru>
MdePkg/DebugLib(PerformanceLib): Fix "unused-but-set-variable" warning
The current definitions of DEBUG_CODE_BEGIN() and DEBUG_CODE_END() use
the local
variable __DebugCodeLocal as an attempt to track parity. If
DEBUG_CODE_END() is
used without a preceding DEBUG_CODE_BEGIN(), __DebugCodeLocal will not
have been
declared and a compilation error will be issued. The mutations of the
variable
are not used to track nesting or such. As the value of this variable is
never
actually used, recent Clang versions issue a "unused-but-set-variable"
warning
for it.
To solve this, re-define __DebugCodeLocal as a BOOLEAN that is always
FALSE and
use it in a do-while loop condition as done explicitly in many places.
Like the
previous solution, DEBUG_CODE_END() cannot be used without
DEBUG_CODE_BEGIN(),
as __DebugCodeLocal will be not have been defined.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The SVSM specification relies on a specific register calling convention to
hold the parameters that are associated with the SVSM request. The SVSM is
invoked by requesting the hypervisor to run the VMPL0 VMSA of the guest
using the GHCB MSR Protocol or a GHCB NAE event.
Create a new version of the VMGEXIT instruction that will adhere to this
calling convention and load the SVSM function arguments into the proper
register before invoking the VMGEXIT instruction. On return, perform the
atomic exchange on the SVSM call pending value as specified in the SVSM
specification.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4683
When VS20xx host-based unit tests are built with debug
libraries a name collision occurs with the DebugLib.h
internal macro _DEBUG(). Rename this internal macro
to _DEBUGLIB_DEBUG() to address the name collision.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
According to UEFI Spec 2.10 page 206, if any EFI_RUNTIME_SERVICES* calls
are not supported for use by the OS at runtime, an EFI_RT_PROPERTIES_TABLE
configuration table should be published describing which runtime services
are supported at runtime. So need to add EFI_UNSUPPORTED return for some
Runtime Service functions.
REF: UEFI spec 2.10 section 8 Services ? Runtime Services
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Suqiang Ren <suqiangx.ren@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding PeiServicesTablePointerLibKs0 for LoongArch64, which provides
setting and getting the PEI service table pointer through the CSR KS0
register.
The idea of this library is derived from
ArmPkg/Library/PeiServicesTablePointerLib/
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add IoCsrRead8, IoCsrRead16, IoCsrRead32, IoCsrRead64, IoCsrWrite8,
IoCsrWrite16, IoCsrWrite32, IoCsrWrite64 to operate the IOCSR registers
of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add CsrRead, CsrWrite and CsrXChg functions for LoongArch, and use them
to operate the CSR register of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add LoongArch AsmCpucfg function and Cpucfg definitions.
Also added Include/Register/LoongArch64/Cpucfg.h to IgnoreFiles of
EccCheck.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding LoongArch local interrupt function set, which is used to control
the opening or closing of the local interrupt when the global interrupt
is enabled.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding SetExceptionBaseAddress and SetTlbRebaseAddress functions
for LoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding InitializeFloatingPointUnits, EnableFloatingPointUnits and
DisableFloatingPointUnits functions for LoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
stimecmp is a CSR supported only when Sstc extension is supported by the
platform. This register can be used to set the timer interrupt directly in
S-mode instead of going via SBI call. Add a function to update this
register.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Implement Cache Management Operations (CMO) defined by
RISC-V spec https://github.com/riscv/riscv-CMOs.
Notes:
1. CMO only supports block based Operations. Meaning cache
flush/invd/clean Operations are not available for the entire
range. In that case we fallback on fence.i instructions.
2. Operations are implemented using Opcodes to make them compiler
independent. binutils 2.39+ compilers support CMO instructions.
Test:
1. Ensured correct instructions are refelecting in asm
2. Qemu implements basic support for CMO operations in that it allwos
instructions without exceptions. Verified it works properly in
that sense.
3. SG2042Pkg implements CMO-like instructions. It was verified that
CpuFlushCpuDataCache works fine. This more of less
confirms that framework is alright.
4. TODO: Once Silicon is available with exact instructions, we will
further verify this.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@...>
Reviewed-by: Jingyu Li <jingyu.li01@...>
There are different ways to manage cache on RISC-V Processors.
One way is to use fence instruction. Another way is to use CPU
specific cache management operation instructions ratified as
per RISC-V ISA specifications to be introduced in future
patches. Current method is fence instruction based, rename the
function accordingly to add that clarity.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The declarations for cache Management functions belong to BaseLib
instead of instance source file. This helps with further restructuring
of cache management code for RISC-V.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Improve the wording of the comment explaining the DEBUG_MANAGEABILITY
debug level.
Signed-off-by: Rebecca Cran <rebecca@os.amperecomputing.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4609
The current CalculateCrc16Ansi implementation does the following:
1) Invert the passed checksum
2) Calculate the new checksum by going through data and using the
lookup table
3) Invert it back again
This emulated my design for CalculateCrc32c, where 0 is
passed as the initial checksum, and it inverts in the end.
However, CRC16 does not invert the checksum on input and output.
So this is incorrect.
Fix the problem by not inverting input checksums nor output checksums.
Callers should now pass CRC16ANSI_INIT as the initial value instead of
"0". This is a breaking change.
This problem was found out-of-list when older ext4 filesystems
(that use crc16 checksums) failed to mount with "corruption".
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Provide Fit format for UniversalPayload, developer can use argument
"--Fit" to build UniversalPayload.fit
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: BruceX Wang <brucex.wang@intel.com>
The EFI_RNG_PROTOCOL can use the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
add a GetRngGuid() function to the RngLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
Add an API to retrieve satp register value.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Add a few more definitions and make SbiCall and TranslateError
usable (not static) by library users.
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4144
This Library is NULL library of TraceHubDebugSysTLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Guo Gua <gua.guo@intel.com>
Cc: Chan Laura <laura.chan@intel.com>
Cc: Prakashan Krishnadas Veliyathuparambil <krishnadas.veliyathuparambil.prakashan@intel.com>
Cc: K N Karthik <karthik.k.n@intel.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4392
Add FDT support in EDK2 by submodule 3rd party libfdt
(https://github.com/devicetree-org/pylibfdt/tree/main/libfdt)
and refer to LibcLib implementation by Pedro.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Benny Lin <benny.lin@intel.com>
Acked-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Bug #4414
Add DEBUG_MANAGEABILITY print error lever to
output debug message of detailed manageability
related module information, such as
- RedfishPkg:
- HTTP header/request/response
- JSON plain text
- Refish resource
- Redfish Host interface information
- Redfish credential information
- Platform configuration to Redfish mapping
- etc.
- ManageabilityPKg
- Protocol payload of MCTP/PLDM/IPMI
- Payload of transport interface transfers
- IPMI BLOB transfer
- etc.
- RedfishClinetPkg
- Redfish feature driver dispatcher
- Redfish BIOS attributes
- Platform configuration (HII) to
Redfish property information
- Redfish C structure information
- etc.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Isaac Oram <isaac.w.oram@intel.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Cc: Tinh Nguyen <tinhnguyen@os.amperecomputing.com>
Add a new library, JedecJep106Lib which provides a service to return the
JEDEC JEP106 manufacturer string given the code and continuation bytes
values.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4405
When loading a PE/COFF image, capture the DLL characteristics fields of
the header into our image context structure so we can refer to them when
mapping the image.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
MdePkg.
Visual Studio versions before VS 2015 don't support __func__ and so
will fail to compile. A workaround is to define __func__ as
__FUNCTION__ :
#define __func__ __FUNCTION__
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib. This
patch merges UefiCpuPkg/UefiCpuLib to MdePkg/CpuLib.
Change-Id: Ic26f4c2614ed6bd9840f817d50e47ac1de4bd013
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
This library is required to make SBI ecalls from the S-mode EDK2.
This is mostly copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVEdk2SbiLib
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Few of the basic helper functions required for any
RISC-V CPU were added in edk2-platforms. To support
qemu virt, they need to be added in BaseLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
- Fix typos of "disable".
- Fix typos of "performance".
- Fix missing spaces.
- Use comma instead of period when the sentence continues on the next
line.
- Fix typo of "PERF_CORE_LOAD_IMAGE".
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4134
When unit testing is enabled, make sure _ASSERT() is not already
defined by the host environment before defining _ASSERT(). This
avoids conflicts with VS20xx builds of GoogleTest based unit tests.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The NIST Special Publications 800-90A, 800-90B and 800-90C
provide recommendations for random number generation. The
NIST 800-90C, Recommendation for Random Bit Generator (RBG)
Constructions, defines the GetEntropy() interface that is
used to access the entropy source. The GetEntropy() interface
is further used by Deterministic Random Bit Generators (DRBG)
to generate random numbers.
The Arm True Random Number Generator (TRNG) library defines an
interface to access the entropy source on a platform, following
the 'Arm True Random Number Generator Firmware Interface'
specification.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
