A subset of fields in the EFI_SMM_SYSTEM_TABLE2 structure are identical
to the fields in the SMM_ENTRY_CONTEXT structure. CopyMem() is used to
transfer the contents of the SMM_ENTRY_CONTEXT structure into the
EFI_SMM_SYSTEM_TABLE2. This is confusing because SMM_ENTRY_CONTEXT is
not used in the declaration of EFI_SMM_SYSTEM_TABLE2 and field contents
are transferred without any reference to individual field names (e.g.
CurrentlyExecutingCpu). In order to make the code easier to maintain
and understand, the CopyMem() is replaced with statements that transfer
each field of SMM_ENTRY_CONTEXT into EFI_SMM_SYSTEM_TABLE2.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Link: http://article.gmane.org/gmane.comp.bios.edk2.devel/3567
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18716 6f19259b-4bc3-4df7-8a09-765794883524
Mark the DXE stack region as non-executable right before handing
off to the DXE core, by invoking the appropriate ArmLib function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <Feng.Tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18588 6f19259b-4bc3-4df7-8a09-765794883524
In a CloseEvent, an UnregisterProtocolNotify is done unconditionally.
There is a penalty associated with searching the protocol database on
every CloseEvent and impacts performance, especially during Network IO.
Unregister needs to be done only if the Event is for a RegisterProtocolNotify.
So extend the ExFlag in IEVENT to a UINT8 and define new flags that can
be set to indicate if the Event is part of a group, or registered on a
protocol notify. Then in CloseEvent, call UnregisterProtocolNotify only
if the register protocol notify flag is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18517 6f19259b-4bc3-4df7-8a09-765794883524
Take the range in the resource descriptor HOB for the memory region described
by the PHIT as higher priority if it is big enough. It can make the memory bin
allocated to be at the same memory region with PHIT that has more better compatibility
to avoid memory fragmentation for some code practices assume and allocate <4G ACPI memory.
Also let the minimal memory size needed include the total memory bin size needed to
make sure memory bin could be allocated successfully.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18503 6f19259b-4bc3-4df7-8a09-765794883524
The HOB List relocation should be at after all the tested memory resources added
(except the memory space that covers HOB List) to the memory services,
because the memory resource found in CoreInitializeMemoryServices()
may have not enough remaining resource for HOB List.
And the memory space that covers HOB List should be processed
after HOB List relocation to avoid the resources allocated by others
to corrupt HOB List before its relocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18499 6f19259b-4bc3-4df7-8a09-765794883524
InternalIsBufferOverlapped() is created to check overlap between buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18312 6f19259b-4bc3-4df7-8a09-765794883524
in case PeiInstallPeiMemory() is done in a callback with
EFI_PEI_PPI_DESCRIPTOR_NOTIFY_DISPATCH, and the callback is registered on
a PPI that is installed in the last PEIM.
At the case, PeiCore SwitchStack code will be not being invoked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18305 6f19259b-4bc3-4df7-8a09-765794883524
Got the build failure feedback below, this patch is to fix that.
This broke the IA32 Ovmf build for me, with GCC 5.1.1 (Fedora 22):
/home/dwmw2/git/edk2/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c:377:7:
error: ‘PageTables’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
AsmWriteCr3 (PageTables);
^
/home/dwmw2/git/edk2/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c:224:9:
note: ‘PageTables’ was declared here
UINTN PageTables;
^
cc1: all warnings being treated as errors
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18190 6f19259b-4bc3-4df7-8a09-765794883524
This feature is added for UEFI spec that says
"Stack may be marked as non-executable in identity mapped page tables".
A PCD PcdSetNxForStack is added to turn on/off this feature, and it is
FALSE by default.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18166 6f19259b-4bc3-4df7-8a09-765794883524
to right after CoreInitializeGcdServices().
Why?
Some platforms maybe report both below 4G and above 4G memory resource hob as tested,
then CoreInitializeMemoryServices() will find and add the tested above 4G memory resource hob to memory descriptor for early memory allocation services,
then if ProcessLibraryConstructorList() that has library constructor tries to allocate below 4G memory and will fail.
In fact, the following CoreInitializeGcdServices() will add all the memory resource hob to GCD map,
and add the tested below 4G memory resource hob to memory descriptor,
but it has been too late for ProcessLibraryConstructorList().
Also move below two lines as they are needed to be after
the constructor of DxeCorePerfomanceLib.
PERF_END (NULL,"PEI", NULL, 0) ;
PERF_START (NULL,"DXE", NULL, 0) ;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18146 6f19259b-4bc3-4df7-8a09-765794883524
v2 changelog:
Check CurrentPeimHandle to check the matched PeimHandle.
Add check point to ShadowPeiCore based on PCD.
v1 changelog:
PeiCore LoadImage always shadow itself and PEIM on normal boot after
the physical memory is installed. On the emulator platform, the shadow
may be not necessary. To support such usage, new PCD PcdShadowPeimOnBoot
is introduced to specify whether loads PEIM in memory by default.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18125 6f19259b-4bc3-4df7-8a09-765794883524
to instead of AllocatePool() to ensure the data is clean for
the following consumption.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18087 6f19259b-4bc3-4df7-8a09-765794883524
that assumes the SMRAM reserved range is only at the end of the SMRAM descriptor.
//
// This range has reserved area, calculate the left free size
//
gSmmCorePrivate->SmramRanges[Index].PhysicalSize = SmramResRegion->SmramReservedStart - gSmmCorePrivate->SmramRanges[Index].CpuStart;
Imagine the following scenario where we just reserve the first page of the SMRAM range:
SMRAM Descriptor:
Start: 0x80000000
Size: 0x02000000
Reserved Range:
Start: 0x80000000
Size: 0x00001000
In this case the adjustment to the SMRAM range size yields zero: ReservedStart - SMRAM Start is 0x80000000 - 0x80000000 = 0.
So even though most of the range is still free the IPL code decides its unusable.
The problem comes from the email thread: [edk2] PiSmmIpl SMRAM Reservation Logic.
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/15268
Also to follow the idea in the email thread, the patch is to
1. Keep only one copy of full SMRAM ranges in gSmmCorePrivate->SmramRanges,
split record for SmmConfiguration->SmramReservedRegions and SMM Core that
will be marked to be EFI_ALLOCATED in gSmmCorePrivate->SmramRanges.
2. Handle SmmConfiguration->SmramReservedRegions at beginning of, at end of,
in the middle of, or cross multiple SmramRanges.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18031 6f19259b-4bc3-4df7-8a09-765794883524
Add the check at DxeLoadCore() on MdeModulePkg\Core\DxeIplPeim\DxeLoad.c
to skip install the "gEfiMemoryTypeInformationGuid" hob if it is already
installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18018 6f19259b-4bc3-4df7-8a09-765794883524
GCD Range is byte address. EFI memory range is page address. To make sure
GCD range is converted to EFI memory range, the following things are added:
1. Merge adjacent GCD range first.
2. Add ASSERT check on GCD range alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17813 6f19259b-4bc3-4df7-8a09-765794883524
The splitting of memory regions into code and data regions violates
architecture specific alignment rules by using a fixed alignment
of 4 KB. Replace it with EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT,
which is defined appropriately on each architecture.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Jaben Carsey" <jaben.carsey@intel.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17812 6f19259b-4bc3-4df7-8a09-765794883524
Move the definitions of EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT and
DEFAULT_PAGE_ALLOCATION to DxeMain.h to make them available explicitly
to all parts of DxeCore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17811 6f19259b-4bc3-4df7-8a09-765794883524
This removes the functions RevertRuntimeMemoryMap () and
DumpMemoryMap () which are not referenced anywhere in the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17808 6f19259b-4bc3-4df7-8a09-765794883524
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource
information, the BootURI device path node will be updated to include
the BootURI information. It means the device path on the child handle
will be updated after the LoadFile() service is called.
To handle this case, DxeCore LoadImage() service is updated as the below:
1) Get Device handle based on Device Path
2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer.
3) Retrieve DevicePath from Device handle
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17799 6f19259b-4bc3-4df7-8a09-765794883524
Child FV may be placed in parent FV image without process required. Then,
Child FV and parent FV will be in the same continuous space. For FileHandle,
FileHandleToVolume() function needs to find the best matched FV handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17704 6f19259b-4bc3-4df7-8a09-765794883524
UEFI2.5 spec, GetMemoryMap(), says:
Attribute: Attributes of the memory region that describe the bit mask
of capabilities for that memory region, and not necessarily the current
settings for that memory region.
But, GetMemoryMap() implementation doesn't append memory capabilities
for MMIO and Reserved memory range. This will break UEFI2.5 Properties
Table feature, because Properties Table need return EFI_MEMORY_RO or
EFI_MEMORY_XP capabilities for OS.
This patch appends memory capabilities for those memory range.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17703 6f19259b-4bc3-4df7-8a09-765794883524
And also SMM Ready To Boot.
The SMM Exit Boot Service protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_EXIT_BOOT_SERVICES
to notify SMM driver that system enter exit boot services.
The SMM Legacy Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_LEGACY_BOOT_GUID
to notify SMM driver that system enter legacy boot.
The SMM Ready To Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_READY_TO_BOOT
to notify SMM driver that system enter ready to boot.
After them, any SMM drivers can get protocol notify on what happened
in DXE phase, then there is no need to let each individual SMM driver
to register SMM Communication Handler for that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17657 6f19259b-4bc3-4df7-8a09-765794883524
The correct logic should be:
- The SectionAlignment is got from Magic number.
- The Magic number is got from PE header and machine type.
The original code mix them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.yao@intel.com>
Reviewed-by: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17603 6f19259b-4bc3-4df7-8a09-765794883524
1. In PiSmmIpl.c, free FullSmramRanges at error condition.
2. Move pool and page management definitions and structures
from PiSmmCorePrivateData.h to PiSmmCore.h.
PiSmmCorePrivateData.h should be only used to share SMM_CORE_PRIVATE_DATA
between PiSmmCore and PiSmmIpl. Pool and page management definitions
and structures were moved from Pool.c and Page.c to PiSmmCorePrivateData.h
incorrectly for memory profile feature at EDK2 R16335 commit.
3. DumpSmramInfo() only used for memory profile, so move the declaration
into SmramProfileRecord.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17598 6f19259b-4bc3-4df7-8a09-765794883524
Use if (Image->Started) condition judgement before call to
UnregisterMemoryProfileImage() in CoreUnloadAndCloseImage().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17597 6f19259b-4bc3-4df7-8a09-765794883524
DescEnd will be clipped for alignment in CoreFindFreePagesI, and it
may fall below DescStart, when alignment is more than 16KB (included)
and both DescStart and original DescEnd fall into a single range of
such alignment. This results in a huge size (Negative number in
unsigned type) for this descriptor, fulfilling the allocation
requirement but failing to run ConvertPages; at last it causes
occasional failure of AllocatePages.
A simple comparison is added to ensure we would never get a negative
number.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17575 6f19259b-4bc3-4df7-8a09-765794883524
The debug message is to print the current TPL and requested TPL value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17543 6f19259b-4bc3-4df7-8a09-765794883524
ARM toolchain raises the build error: "enumerated type mixed with
another type".
To fix the issue, typecase can be used like below.
- return EfiMaxMemoryType + 1;
+ return (EFI_MEMORY_TYPE)(EfiMaxMemoryType + 1);
But to eliminate the confusion, update the return type of
GetProfileMemoryIndex() from EFI_MEMORY_TYPE to UINTN.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17535 6f19259b-4bc3-4df7-8a09-765794883524
This change will make DEBUG information be aligned with DEBUG_GCD enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17470 6f19259b-4bc3-4df7-8a09-765794883524
When the ExecuteSmmCoreFromSmram() function fails, SmmIplEntry()
restores the SMRAM range to EFI_MEMORY_UC. However, it saves the
return value of gDS->SetMemorySpaceAttributes() in the same Status
variable that gDS->contains the return value of ExecuteSmmCoreFromSmram().
Therefore, if gDS->SetMemorySpaceAttributes() succeeds, the failure
of ExecuteSmmCoreFromSmram() is masked, and Bad Things Happen (TM).
Introduce a temporary variable just for the return value of
gDS->SetMemorySpaceAttributes().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17417 6f19259b-4bc3-4df7-8a09-765794883524
PI 1.4 clarified SMM register protocol notify function return status as below:
EFI_SUCCESS Successfully returned the registration record that has
been added or unhooked
EFI_INVALID_PARAMETER Protocol is NULL or Registration is NULL
The implementation of SmmRegisterProtocolNotify() already followed this new
rule, needn't to be updated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17349 6f19259b-4bc3-4df7-8a09-765794883524
Roll back report status code to original place in RuntimeDriverSetVirtualAddressMap.
Per UEFI spec, the call to SetVirtualAddressMap() must be done with the physical mappings.
We can not assume virtual address could work in SetVirtualAddressMap (), so we can not call
report status code interface with virtual address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17139 6f19259b-4bc3-4df7-8a09-765794883524
Move report status code to the end after all pointers convert and image relocation are finished.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17136 6f19259b-4bc3-4df7-8a09-765794883524
For PI spec vol3,
"EFI_SW_DXE_BS_PC_VIRTUAL_ADDRESS_CHANGE_EVENT The EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event was signaled."
However, in current code base, it is reported before events were signaled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17123 6f19259b-4bc3-4df7-8a09-765794883524
Add status code report and cpu deadloop when DXE IPL PPI is not found.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17087 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore calls REPORT_STATUS_CODE_WITH_EXTENDED_DATA() with its internal structure for Image
dispatcher. No code consumes it. But, it brings confuse.
DxeCore and SmmCore calls REPORT_STATUS_CODE_WITH_EXTENDED_DATA() with Handle only.
To be consistent, update PeiCore to be same to DxeCore and SmmCore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17085 6f19259b-4bc3-4df7-8a09-765794883524
On AArch64, the OS can choose to run with a page size of 64 KB,
making it cumbersome to deal with UEFI reserved memory regions
whose boundaries are not 64 KB aligned.
So increase the allocation granularity for runtime regions to
64 KB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17016 6f19259b-4bc3-4df7-8a09-765794883524
This patch changes the allocation logic for the pool allocator to only
allocate additional pages if the requested allocation cannot be fulfilled
from the current bin or any of the larger ones. If there are larger blocks
available, they will be used to serve the allocation, and the remainder will
be carved up into smaller blocks using the existing carving up logic.
Note that all pool sizes are a multiple of the smallest pool size, so it is
guaranteed that the remainder will be carved up without spilling. Due to the
exponential nature of the pool sizes, the amount of work is logarithmic in
the size of the available block.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17015 6f19259b-4bc3-4df7-8a09-765794883524
In preparation of the next patch, that serves allocations from higher-up
bins if the current bin is depleted, this patch updates the carving up
strategy to populate the largest bins first. To ensure that there will
always be an allocation of the appropriate size made, the current allocation
request is served first from the newly allocated memory region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17014 6f19259b-4bc3-4df7-8a09-765794883524
In preparation of making the pool code capable of serving allocations
from higher-up bins, update the free path to traverse a candidate page
by following the index of POOL_FREE header instead of duplicating the
carving logic that was used at page allocation time. This allows chunks
to be split into smaller ones, where one can be returned to serve the
allocation, and the other stored in a smaller bin for later use.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17013 6f19259b-4bc3-4df7-8a09-765794883524
The existing linear mapping between allocation size and pool index
does not scale when moving to a 64 KB granularity or beyond. With
a granularity of 64 KB, 2048 (!) bins will be created for each
memory type, each differing 32 bytes in size with the next one.
Instead, introduce an exponential scheme where each bin size is
the sum of the two previous ones.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17012 6f19259b-4bc3-4df7-8a09-765794883524
After fixing the sanity check on the alignment of the runtime regions
in SVN revision #16630 ("MdeModulePkg/DxeMain: Fix wrong sanity check
in CoreTerminateMemoryMap()"), it is no longer possible to define a
runtime allocation alignment that is different from the boot time
allocation alignment.
For instance, #defining the following in MdeModulePkg/Core/Dxe/Mem/Imem.h
will hit the ASSERT () in MdeModulePkg/Core/Dxe/Mem/Page.c:1798
#define EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT (SIZE_64KB)
#define DEFAULT_PAGE_ALLOCATION (EFI_PAGE_SIZE)
(which is needed for 64-bit ARM to adhere to the Server Base Boot
Requirements [SBBR], which stipulates that all runtime memory regions
should be naturally aligned multiples of 64 KB)
This patch fixes this use case by ensuring that the backing for the memory
pools is allocated in appropriate chunks for the memory type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17011 6f19259b-4bc3-4df7-8a09-765794883524
Modify DxeMain.c which displays incorrect debug message regarding FV Hob.
Specifically, the BaseAddress and Length are not related to the same FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16660 6f19259b-4bc3-4df7-8a09-765794883524
The function CoreTerminateMemoryMap() performs some final sanity checks on the runtime regions in the memory map before allowing ExitBootServices() to complete.
Unfortunately, it does so by testing the EFI_MEMORY_RUNTIME bit in the Attribute field, which is never set anywhere in the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16630 6f19259b-4bc3-4df7-8a09-765794883524
The traversing of a Memory Mapped FV can overflow the 4GB limit on a 32bit system
during the setting up a Linked List of FFS file inside the FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16527 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore FirmwareVolmeInfoPpiNotifyCallback() should check FvCount when new one is added.
Now, this check is the entry of Notify function that is too early, because PeiCore will
install FvInfo and FvInfo2 both for one sub FV image and trig FvNotify function twice for the same FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16520 6f19259b-4bc3-4df7-8a09-765794883524
ARM Toolchain raises a warning/error when an integer is used instead
of a enum value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16501 6f19259b-4bc3-4df7-8a09-765794883524
Fix DxeCore NotifyFwVolBlock() function to make sure FV protocol is installed for all valid PI FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16496 6f19259b-4bc3-4df7-8a09-765794883524
If CommunicationBuffer is not in valid address scope, return EFI_INVALID_PARAMETER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <Jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16486 6f19259b-4bc3-4df7-8a09-765794883524
It is defined in the PI Specification version 1.3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16409 6f19259b-4bc3-4df7-8a09-765794883524
Fix compiler warning about variable set but unused by returning status
of last operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16381 6f19259b-4bc3-4df7-8a09-765794883524
Move the check of FV Header signature and file system to
GetFwVolHeader() to avoid reading the whole unexpected FvHeader.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16255 6f19259b-4bc3-4df7-8a09-765794883524
It can fix the confused ERROR log like below.
"AllocatePages failed: No 0x1 Pages is available.
There is only left 0x1 pages memory resource to be allocated."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16211 6f19259b-4bc3-4df7-8a09-765794883524
In XCODE tool chain, the 64-bit bit wise and operation is causing the compiler to emit an __umoddi3.
This patch uses BaseLib API to replace 64-bit bit operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16065 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
The code FvCheck() will check FFS file checksum to verify if FFS file is valid when the file is
with FFS_ATTRIB_CHECKSUM set. The whole file will be read through when doing checksum check.
So we can cache FFS file to memory buffer for following checksum calculating first.
And then, the cached file buffer can be also used for FvReadFile.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15958 6f19259b-4bc3-4df7-8a09-765794883524
Previous DxeCore FwVol code will cache whole FvMain FV from flash that may be
uncached if platform reports FvMain FVB, it will impact DXE performance.
The code already has file level cache, so don’t need to cache memory mapped IO FV.
It can also reduce memory consumption of caching memory mapped IO FVs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15916 6f19259b-4bc3-4df7-8a09-765794883524
It changes some of the PCD declarations to add more supported PCD storage types and
the change in the PCD access methods is associated with that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15798 6f19259b-4bc3-4df7-8a09-765794883524
If GUIDED section has AUTH attribute only, DxeCore may wrongly set its AuthenticationStatus to 0 when its matched GUIDED extraction handler is not installed and Auth data is not verified. For this case, the return AuthenticationStatus should be EFI_AUTH_STATUS_NOT_TESTED.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Yao, Jiewen <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15781 6f19259b-4bc3-4df7-8a09-765794883524
WaitForEvent() are NULL.
Passing NULL pointer would cause a segmentation fault in the current code.
This change prevents to get segmentation faults in this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15643 6f19259b-4bc3-4df7-8a09-765794883524
Since LBA_CACHE is DxeCore implementation specific, DxeCore will check it here.
Signed-off by: jiewen yao <jiewen.yao@intel.com>
Reviewed by: liming gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15136 6f19259b-4bc3-4df7-8a09-765794883524
2. PeiCore will call this API to migrate the PEI Services Table pointer from temporary RAM to permanent RAM.
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15115 6f19259b-4bc3-4df7-8a09-765794883524
1. HOB address is not 8 byte alignment.
2. FV with the max supported PEIM can't be dispatched.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14993 6f19259b-4bc3-4df7-8a09-765794883524
2. DxeMain will get Vector Handoff Table GUIDed HOB to install configuration table if it has.
3. Updated CPU Exception Handler Library to provide 3 new APIs to replace original one API and updated NULL instance accordingly.
4. Updated DxeMain/CapsuleX64/BootSriptExectorDxe to use the new API in CPU Exception Handler Lib.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14884 6f19259b-4bc3-4df7-8a09-765794883524
2. Add support to find section by instance rather than only 0 at PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14763 6f19259b-4bc3-4df7-8a09-765794883524
1. If at least one of the handlers returns EFI_WARN_INTERRUPT_SOURCE_QUIESCED or EFI_SUCCESS then the function will return EFI_SUCCESS.
If a handler returns EFI_SUCCESS and HandlerType is not NULL then no additional handlers will be processed.
2. If a handler returns EFI_INTERRUPT_PENDING and HandlerType is not NULL then no additional handlers will be processed and EFI_INTERRUPT_PENDING will be returned.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14136 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix issue that PlatformHookAfterSmiDispatch() and PERF_END() are not called in the case mInLegacyBoot is TRUE.
signed-off-by: Jeff Fan <jeff.fan@intel.com>
reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13740 6f19259b-4bc3-4df7-8a09-765794883524
1. Update SecurityManagementLib to support SAP2 and SAP services.
2. Update SecurityStub driver to produce SAP2 and SAP protocol both.
3. Update DxeCore and SmmCore to use SAP2 and SAP service to verify Image.
4. Update DxeCore ConnectController() to use SAP2 service to check user permission.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Guo Dong <dong.guo@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13660 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney
Ard Biesheuvel
Samer El-Haj-Mahmoud
Laszlo Ersek
Star Zeng
Liming Gao
Qiu Shumin
Yao, Jiewen
Heyi Guo
Zachary Bobroff
Jeff Fan
Elvin Li
Hao Wu
Hot Tian
Olivier Martin
Samer El-Haj-Mahmoud
Eugene Cohen
Garrett Kirkendall
Feng Tian
Eric Dong
Tapan Shah
Andrew Fish
jyao1
Harry Liebel
mdkinney
lzeng14
ydong10
vanjeff
li-elvin
jyao1
erictian
lgao4
rsun3
czhang46
oliviermartin
niruiyu