For scene of
HandOffToDxeCore()->SwitchStack(DxeCoreEntryPoint)->
InternalSwitchStack()->LongJump(),Variable HobList.Raw
will be passed (from *Context1 to register a0) to
DxeMain() in parameter *HobStart.
However, meanwhile the function LongJump() overrides
register a0 with a1 (-1) due to commit (ea628f28e5 "RISCV: Fix
InternalLongJump to return correct value"), then cause hang.
Replacing calling LongJump() with new InternalSwitchStackAsm() to pass
addres data in register s0 to register a0 could fix this issue (just
like the solution in MdePkg/Library/BaseLib/AArch64/SwitchStack.S)
Signed-off-by: Yang Wang <wangyang@bosc.ac.cn>
Cc: Bamvor Jian ZHANG <zhangjian@bosc.ac.cn>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ran Wang <wangran@bosc.ac.cn>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
stimecmp is a CSR supported only when Sstc extension is supported by the
platform. This register can be used to set the timer interrupt directly in
S-mode instead of going via SBI call. Add a function to update this
register.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Implement Cache Management Operations (CMO) defined by
RISC-V spec https://github.com/riscv/riscv-CMOs.
Notes:
1. CMO only supports block based Operations. Meaning cache
flush/invd/clean Operations are not available for the entire
range. In that case we fallback on fence.i instructions.
2. Operations are implemented using Opcodes to make them compiler
independent. binutils 2.39+ compilers support CMO instructions.
Test:
1. Ensured correct instructions are refelecting in asm
2. Qemu implements basic support for CMO operations in that it allwos
instructions without exceptions. Verified it works properly in
that sense.
3. SG2042Pkg implements CMO-like instructions. It was verified that
CpuFlushCpuDataCache works fine. This more of less
confirms that framework is alright.
4. TODO: Once Silicon is available with exact instructions, we will
further verify this.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@...>
Reviewed-by: Jingyu Li <jingyu.li01@...>
There are different ways to manage cache on RISC-V Processors.
One way is to use fence instruction. Another way is to use CPU
specific cache management operation instructions ratified as
per RISC-V ISA specifications to be introduced in future
patches. Current method is fence instruction based, rename the
function accordingly to add that clarity.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
InternalLongJump was not returning the 2nd parameter passed
to LongJmp (Value) as the return value from SetJmp.
Seen with code compiled with -Os, where an LongJmp (Buffer, -1)
somehow translated to SetJmp returning 0...
Cc: Yong Li <yong.li@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Tuan Phan <tphan@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Add an API to retrieve satp register value.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Implement the SpeculationBarrier with implementations consisting of
fence instruction which provides finer-grain memory orderings.
Perform Data Barrier in RiscV: fence rw,rw
Perform Instruction Barrier in RiscV: fence.i; fence r,r
More detail is in Appendix A: RVWMO Explanatory Material in
https://github.com/riscv/riscv-isa-manual
This API is first introduced in the below commits for IA32 and x64
d9f1cac51be83d841fdc
and below the commit for ARM and AArch64 implementation
c0959b4426
This commit is to add the RiscV64 implementation which will be used by
variable service under Variable/RuntimeDxe
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Evan Chai <evan.chai@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Tuan Phan <tphan@ventanamicro.com>
Signed-off-by: Yong Li <yong.li@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
InternalSwitchStack may be called with a TPL high
enough for a DebugLib implementation to assert.
Other arch implementations don't log either.
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Few of the basic helper functions required for any
RISC-V CPU were added in edk2-platforms. To support
qemu virt, they need to be added in BaseLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the MdePkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
While RISC-V hart is trapped into S-Mode, the S-Mode interrupt
CSR (SIE) is disabled by RISC-V hart. However the (SIE) is enabled
again by RestoreTPL, this causes the second S-Mode trap is triggered
by the machine mode (M-Mode)timer interrupt redirection. The SRET
instruction clear Supervisor Previous Privilege (SPP) to zero
(User mode) in the second S-Mode interrupt according to the RISC-V
spec. Above brings hart to the user mode (U-Mode) when execute
SRET in the nested S-Mode interrupt handler because SPP is set to
User Mode in the second interrupt. Afterward, system runs in U-Mode
and any accesses to S-Mode CSR causes the invalid instruction exception.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <liming.gao@intel.com>
王洋
Sunil V L
Dhaval
Andrei Warkentin
Tuan Phan
Yong Li
Michael Kubacki
Michael D Kinney
Abner Chang