This patch is to resolve the lock-up issue if the value of HTTP header
is blank. The issue is recorded @
https://bugzilla.tianocore.org/show_bug.cgi?id=1102.
Cc: Stephen Benjamin <stephen@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Stephen Benjamin <stephen@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2: use "IP & Netmask" directly instead of defining an additional variable.
This patch is to sync the direct route entry setting in both the default
and Instance route table {Subnet, Mask, NextHope} (
https://bugzilla.tianocore.org/show_bug.cgi?id=1143).
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The bug is that it cause the RaiseError always be set to TRUE even we
call the function with FALSE parameter.
Cc: Hess Chen <hesheng.chen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Hess Chen <hesheng.chen@intel.com>
Add NmakeSubdirs.py to replace NmakeSubdirs.bat in VS Makefile. This script will
invoke nmake in multi thread mode. It can save more than half time of BaseTools
C clean build.
GCC make supports multiple thread in make phase. So, GNUmakefile doesn't need apply
this script.
single task or job=1:
just single thread and invoke subprocess,subprocess will use
system.stdout to print output.
multi task:
thread number is logic cpu count.All subprocess output will pass to
python script by PIPE and then script print it to system.stdout.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo<dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Test-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1167
When the HSEE in the USBCMD bit is a ‘1’ and the HSE bit in the
USBSTS register is a ‘1’, the xHC shall assert out-of-band error
signaling to the host and assert the SERR# pin.
To prevent masking any potential issues with SERR, this patch is
to set USBCMD Host System Error Enable(HSEE) Bit if PCICMD SERR#
Enable Bit is set.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Fei1 Wang <fei1.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If the SkuB's parent SkuA is not in SKUID_IDENTIFIER, then
make SkuB inherit from SkuA as if the SKUID_INDENTIFIER
is ALL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Build tool should report warning if a platform
defines [DefaultStores] but forgets to defined
PcdNvStoreDefaultValueBuffer as PcdsDynamicExVpd in dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the issue that
The Pcd field value is override incorrectly when there
is no Pcd overall value assignment in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is user use 0x1} as a hex value for Pcd, it directly cause
tool report traceback info. This patch add more error info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Today's implementation does an exact device path match to check
whether the device path of a console is in ConIn/ConOut/ErrOut.
But that doesn't work for the USB keyboard.
Because when a platform have multiple USB port, ConIn needs to
carry all device paths corresponding to each port.
Even worse, today's BDS core logic removes the device path from
ConIn/ConOut/ErrOut when the connection to that device path fails.
So if user switches the USB keyboard from one port to another across
boot, the USB keyboard doesn't work in the second boot.
ConPlatform driver solved this problem by adding the
IsHotPlugDevice() function. So that for USB keyboard, ConPlatform
doesn't care whether its device path is in ConIn or not.
But the rule is too loose, and now causes platform BDS cannot control
whether to enable USB keyboard as an active console.
The patch changes ConPlatform to support USB short-form device path
when checking whether the device path of a console is in
ConIn/ConOut/ErrOut.
The logic to always accept USB/PCCARD device as active console is
removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1164
The left operand is 64-bit but right operand could be 32-bit.
A typecast is a must because of '~' op before it.
Cc: Hao A Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
BZ#: https://bugzilla.tianocore.org/show_bug.cgi?id=1160
There're two parameters which have different name in comment and prototype.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
When build with WinSDK <= Win10 TH2, the terminal over CMD.exe
doesn't work. Because Win10 later than TH2 starts to support VT
terminal.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Since the emulator under Windows is enabled, the patch changes
README to include the information of emulator under Windows.
It also changes README to Readme.md for better looking.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Change file format to DOS
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
This feature is the same as Stack Guard enabled in driver CpuDxe but
applies to PEI phase. Due to the specialty in PEI module dispatching,
this driver is changed to do the actual initialization in notify
callback of event gEfiPeiMemoryDiscoveredPpiGuid. This can let the
stack guard apply to as most PEI drivers as possible.
To let Stack Guard work, some simple page table management code are
introduced to setup Guard page at base of stack for each processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The conflict issues are introduced by Stack Guard feature enabled for
PEI.
The first is CR0 which should be restored after CR3 and CR4.
Another is TR which should not be passed from BSP to AP during init
phase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Stack Guard needs to setup stack switch capability to allow exception
handler to be called with good stack if stack overflow is detected.
This patch update InitializeCpuExceptionHandlersEx() to allow pass
extra initialization data used to setup exception stack switch for
specified exceptions.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
PEI Stack Guard needs to enable paging before DxeIpl. This might cause
#GP in the transition from 32-bit PEI to 64-bit DXE due to the code
trying to write CR3 register with PML4 page table while the processor
is enabled with PAE paging.
Simply disabling paging before updating CR3 can solve this conflict.
There's no such issue for 64-bit PEI so this change applies only to
32-bit code.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In V2, Remove GetImageReadFunction(), directly use PeiImageRead().
The copy PeiImageReadForShadow function doesn't improve the boot performance.
This patch removes this copy logic to simplify the code logic.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The unused global variable InvalidChars is removed.
It is only used in the function IsValidCommandName which
was removed previously.
https://bugzilla.tianocore.org/show_bug.cgi?id=1066
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
UEFI Sct validates Dma mapping. For CoherentDmaLib it always failed
because there were no required checks present in DmaMap.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The only valid memory types for DmaAlignedBuffer should be
EfiBootServicesData and EfiRuntimeServicesData. However due to the typo,
there is no way to allocate runtime pages, and INVALID_PARAMETER is
always returned. Fix the typo.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Update GenFdsGlobalVariable GetAlignment to support G.
replace use of local function in Region with updated shared function.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob C Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The EhcReset(), EhcGetRootHubPortStatus() and EhcDriverBindingStart()
functions need to see whether the host controller (or a specific port on
the host controller) can be accessed, dependent on the controller having
(or the specific port being) an in-use debug port. Because the condition
isn't simple, extract it to a separate function.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The redundant functions which are never called have been
removed. They are InternalShellProtocolDebugPrintMessage,
UpdateFileName,RemoveFileTag and IsValidCommandName.
https://bugzilla.tianocore.org/show_bug.cgi?id=1066
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some local variables are initialized but never used.
GCC complains about that. The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1145
Currently run PatchCheck.py with Python3 will meet
following error:
.....
File "PatchCheck.py", line 554, in run_git
return Result[0].decode('utf-8', 'ignore') if Result[0] and
Result[0].find("fatal")!=0 else None
TypeError: a bytes-like object is required, not 'str'
This issue was introduce by commit:5ac4548cdf654.
This patch is to convert the str object of "fatal" to
byte object to fix this failure.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Only the FeatureFlag type or FixedAtBuild type can be used in the
expression.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Defined a pcd in Ovmf.dec and used that pcd in AcpiPlatformDxe.inf,
then assign a value to that pcd from DSC, then build Ovmf platform
successfully. But this Pcd was wrongly listed into not used section
in the report.txt file.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Fix trailing white spaces and invalid line ending issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Commit 09943f5ecc ("MdeModulePkg: Skip to manage usb debug port in EDKII
EHCI driver if it's used by usb debug port driver", 2012-04-28) made the
host controller reset in EhcDriverBindingStart() conditional. The intent
was to avoid the reset when
- one of the USB ports on the host controller was a Debug Port, AND
- the Debug Port was in use.
This translates to the following positive condition: reset the controller
only if:
- no USB port on the host controller is a Debug Port, OR
- the Debug Port is not in use.
Commit 09943f5ecc failed to implement the first subcondition, and thus
the result is too strict now (for resetting the host controller). Relax it
to the correct condition.
This issue was found by Steven Shi on QEMU. QEMU's EHCI device model does
not have a Debug Port. In repeated disconnect / connect cycles, the
controller is never reset in EhcDriverBindingStart(), therefore the
devices on the controller are never re-enumerated after a disconnect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1129
Fixes: 09943f5ecc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Steven Shi <steven.shi@intel.com>
fwvol.c(1572) : warning C4701: potentially uninitialized
local variable 'Status' used
The build failure is caused by
0e042d0ad7 for
https://bugzilla.tianocore.org/show_bug.cgi?id=1131
This patch initializes Status to fix the build failure.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Extend the keyword "!include", "!if", etc to case-insensitive.
Current DSC parser already support it, while FDF parser only support
the lower case, so this patch add the support for FDF parser.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1111
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1115
When the type of HiiValue is EFI_IFR_TYPE_BUFFER,
its question type is EFI_IFR_ORDERED_LIST_OP.
And the buffer size allocated for Statement->BufferValue
of orderedList is "Statement->StorageWidth"
in IfrParse.c.
So here when backup the buffer value and copy the size of
"Statement->StorageWidth + sizeof(CHAR16)" is incorrect.
This patch is to fix this issue.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1131
PI spec and BaseTools support to generate multiple FV images
in one FV file.
This patch is to update DxeCore to handle the case.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1131
PI spec and BaseTools support to generate multiple FV images
in one FV file.
This patch is to update PeiCore to handle the case.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Carsey, Jaben
Jiaxin Wu
Yonghong Zhu
Dongao Guo
Star Zeng
Zhao, ZhiqiangX
Feng, Bob C
zhijufan
Ruiyu Ni
Jian J Wang
Zhang, Chao B
Fu Siyuan
Liming Gao
shenglei
Vladimir Olovyannikov
Laszlo Ersek
Chen A Chen
Dandan Bi
Eric Dong